Dificuldades de aprendizagem em estequiometria: uma proposta de ensino apoiada na modelagem

In order to learn/teach chemistry some themes are relevant, like the stoichiometry, which consists in the study of the weight ratios in the combination of elements and compounds between themselves. This is an underlying subject in the understanding/representation/forethought of chemical reactions. Considering these aspects, our study presents a modeling-based proposal to develop the content of stoichiometry with prospective chemistry teachers. With this aim, we have made a review of literature, which we considered when tried to identify the learning difficulties using both quizzes and pedagogical tests, and then, from those difficulties we could propose a teaching unit for this concept and, consequently the evaluation of our proposal. The participants were chemistry undergraduates at the Universidade Federal do Rio Grande do Norte (UFRN) from assorted levels. As a methodological framework, we rely on the discursive textual analysis to characterize the speech of participants. As main results we observed ideas of appearance or disappearance of matter during chemical transformations, disregard of stoichiometric proportions when using drawings to represent the microscopic level of a reaction and confusion between the magnitude amount of matter and other magnitudes such as mass and volume. The final product is a sequence of instruction, based on the modeling previous research literature , with the goal of improving students ability to articulate the macroscopic and submicroscopic levels of representation of the matter

Registro semiautomático entre imagens infravermelhas e RGB coletadas por um par de câmaras digitais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Higher order ionospheric effects in GNSS positioning in the European region

After removal of the Selective Availability in 2000, the ionosphere became the dominant error source for Global Navigation Satellite Systems (GNSS), especially for the high-accuracy (cm-mm) demanding applications like the Precise Point Positioning (PPP) and Real Time Kinematic (RTK) positioning.The common practice of eliminating the ionospheric error, e. g. by the ionosphere free (IF) observable, which is a linear combination of observables on two frequencies such as GPS L1 and L2, accounts for about 99% of the total ionospheric effect, known as the first order ionospheric effect (Ion1). The remaining 1% residual range errors (RREs) in the IF observable are due to the higher - second and third, order ionospheric effects, Ion2 and Ion3, respectively. Both terms are related with the electron content along the signal path; moreover Ion2 term is associated with the influence of the geomagnetic field on the ionospheric refractive index and Ion3 with the ray bending effect of the ionosphere, which can cause significant deviation in the ray trajectory (due to strong electron density gradients in the ionosphere) such that the error contribution of Ion3 can exceed that of Ion2 (Kim and Tinin, 2007).The higher order error terms do not cancel out in the (first order) ionospherically corrected observable and as such, when not accounted for, they can degrade the accuracy of GNSS positioning, depending on the level of the solar activity and geomagnetic and ionospheric conditions (Hoque and Jakowski, 2007). Simulation results from early 1990s show that Ion2 and Ion3 would contribute to the ionospheric error budget by less than 1% of the Ion1 term at GPS frequencies (Datta-Barua et al., 2008). Although the IF observable may provide sufficient accuracy for most GNSS applications, Ion2 and Ion3 need to be considered for higher accuracy demanding applications especially at times of higher solar activity.This paper investigates the higher order ionospheric effects (Ion2 and Ion3, however excluding the ray bending effects associated with Ion3) in the European region in the GNSS positioning considering the precise point positioning (PPP) method. For this purpose observations from four European stations were considered. These observations were taken in four time intervals corresponding to various geophysical conditions: the active and quiet periods of the solar cycle, 2001 and 2006, respectively, excluding the effects of disturbances in the geomagnetic field (i.e. geomagnetic storms), as well as the years of 2001 and 2003, this time including the impact of geomagnetic disturbances. The program RINEX_HO (Marques et al., 2011) was used to calculate the magnitudes of Ion2 and Ion3 on the range measurements as well as the total electron content (TEC) observed on each receiver-satellite link. The program also corrects the GPS observation files for Ion2 and Ion3; thereafter it is possible to perform PPP with both the original and corrected GPS observation files to analyze the impact of the higher order ionospheric error terms excluding the ray bending effect which may become significant especially at low elevation angles (Ioannides and Strangeways, 2002) on the estimated station coordinates.

DC and AC side harmonics in CCC converters

The capacitor-commutated converter (CCC) has frequently been used in the conception of HVDC systems connected to busbars with low short circuit level. This alternative arrangement, in substitution to the conventional ones, guarantees less sensitive operational conditions to problems related with the commutation failure in the inverters besides supplying part of the reactive energy to be compensated. Studies related with its performance in steady and transient states have been presented in several works, however its behavior as harmonic source is still little explored. This work presents preliminary studies focusing the generation of characteristic harmonics by this type of converter. Subjects related with the amplification of the harmonic magnitudes are investigated and compared considering similar arrangements of conventional static converters (LCC) and CCC schemes. It is also analyzed the harmonic generation on the dc side of the installation and its influence on the ac side harmonics. The results are obtained from simulations in the time domain in PSpice environment and they clearly illustrate the operational differences between the L CC and the CCC schemes with regard to characteristic harmonic generation.

Técnicas de parametrização global para o fluxo de carga continuado

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Improved geometric parameterisation techniques for continuation power flow

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Instituições e conflitos comerciais no Mercosul

De que forma a evolução da estrutura institucional do Mercosul, desde sua criação até sua atual conformação, facilita a transformação de conflitos econômico-comerciais, de menor e maior grau, em conflitos políticos. Acredita-se que uma parte significativa dos conflitos no Mercosul poderia ser solucionada tecnicamente, sem resvalar nas relações políticas globais dos Estados membros, como tem ocorrido regularmente.

Parâmetros de fonte de microterremotos em Cascavel-CE

In this dissertation it was studied the rupture characteristic of earthquakes of the Town of Cascavel CE, Northeastern Brazil. Located on the border of the Potiguar Basin, the Town of Cascavel is one of the most seismically active intraplate areas in the country. In this town, on November 20th, 1980 a 5,2mb earthquake occurred. This was the largest earthquake ever reported in Northeast Brazil. Studies of this region using instruments were possible after 1989, with several campaigns being done using seismographic networks. From the beginning of the monitoring to April 2008 more than 55,000 events were recorded. With the data collected by a network with six 3-components digital seismographic stations during the campaigns done from September 29th, 1997 to March 5th, 1998, estimates of source parameters were found fitting the displacement spectra in the frequency domain for each event. From the fitting of the displacement spectra it was possible to obtain the corner frequency ( ) c f and long period amplitude ( ) W0 . Source parameters were determined following Brune (1970) and Madariaga (1976) models. Twenty-one seismic events were analyzed (0.7 £ £ 2.1) b m in order to estimate the source dimension (r ), seismic moment ( ) M0 , static stress drop (Ds ), apparent stress ( ) a s , seismic energy ( ) S E and moment magnitude ( ) W M for each of the events. It was observed that the ratio between radiated seismic energy and moment seismic (apparent stress) increases with increasing moment and hence magnitude at the observed range. As suggested by Abercrombie (1995), also in this work there is a breakdown in the scaling for earthquakes with magnitudes smaller than three ( < 3.0) W M , so that the rupture physics is different for larger events. If this assumption is valid, the earthquakes analyzed in this work are not selfsimilar. Thus, larger events tend to radiated more energy per unit area than smaller ones.

Estudo do potencial da técnica de nanossísmica para o monitoramento de hidrofraturamento em reservatórios de hidrocarbonetos

Hydraulic fracturing is an operation in which pressurised fluid is injected in the geological formation surrounding the producing well to create new permeable paths for hydrocarbons. The injection of such fluids in the reservoir induces seismic events. The measurement of this reservoir stimulation can be made by location these induced microseismic events. However, microseismic monitoring is an expensive operation because the acquisition and data interpretation system using in this monitoring rely on high signal-to-noise ratios (SNR). In general, the sensors are deployed in a monitoring well near the treated well and can make a microseismic monitoring quite an expensive operation. In this dissertation we propose the application of a new method for recording and location of microseismic events called nanoseismic monitoring (Joswig, 2006). In this new method, a continuous recording is performed and the interpreter can separate events from noise using sonograms. This new method also allows the location of seismic sources even when P and S phases onsets are not clear like in situations of 0 dB SNR. The clear technical advantage of this new method is also economically advantageous since the sensors can potentially be installed on the surface rather than in observation well. In this dissertation field tests with controlled sources were made. In the first test small explosives using fire works at 28 m (slant distances) were detected yealding magnitudes between -2.4 ≤ ML ≤ -1.6.. In a second test, we monitored perforation shots in a producing oil field. In this second test, one perforation shot was located with slant distances of 861 m and magnitude 2.4 ML. Data from the tests allow us to say that the method has potential to be used in the oil industry to monitor hydrofracture

Orientação e magnitude de tensões na bacia potiguar: implicações para evolução de bacias em margens passivas

This study presents new stress orientations and magnitudes from the Potiguar basin in the continental margin of Brazil. We analyzed breakout and drilled induced fractures derived from resistivity image logs run in ten oil wells. We also used direct Shmin measurements determined from hydraulic fractures and rock strength laboratory analysis. In addition, we compared these results with 19 earthquake focal mechanisms located in the crystalline basement. We observed that stress directions and magnitudes change across the basin and its basement. In the basin, the SHmax gradient of 20.0 MPa/km and the SHmax/Shmin ratio of 1.154 indicate a normal stress regime from 0.5 to 2.0 km, whereas the SHmax gradient of 24.5MPa/km and the SHmax/Shmin ratio of 1.396 indicate a strike slip stress regime from 2.5 to 4.0 km. The deeper strike-slip stress regime in the basin is similar to the regime in the basement at 1-12 km deep. This stress regime transition is consistent with an incipient tectonic inversion process in the basin. We also noted that the SHmax direction rotates from NW SE in the western part of the Potiguar basin to E W in its central and eastern part, following roughly the shoreline geometry. It indicates that local factors, as density contrast between continental and oceanic crust and sediment loading at the continental shelf influence the stress field. The concentration of fluid pressure in faults of the lowpermeability crystalline basement and its implications to establish a critically stressed fault regime in the basement is also discussed

Qualidade de vida na terceira idade: um conceito subjetivo

Tendo-se em conta a expectativa de vida cada vez mais alta, vários estudos têm sido desenvolvidos de modo a contribuir para a melhoria da qualidade de vida na terceira idade. Objetivou-se conhecer a opinião dos idosos de um município de porte médio do interior paulista sobre o que é qualidade de vida, através de uma pergunta aberta que foi incluída como parte de um inquérito populacional sobre estilo e qualidade de vida. A análise da referida questão foi realizada através do método de Análise de Conteúdo. Posteriormente calcularam-se as freqüências das categorias obtidas, agrupadas segundo o método de Ward, e em seguida os idosos foram agrupados segundo o método de k-médias. Os resultados indicaram a existência de três grupos de idosos segundo sua definição de qualidade de vida: o primeiro valorizou a questão afetiva e a família; o segundo priorizou a obtenção do prazer e conforto; o terceiro poderia ser sintetizado como o idoso que identifica a qualidade de vida colocando em prática o seu ideário de vida. Sugere-se que, na implementação de ações, se objetive melhorar a qualidade de vida do idoso, levando-se em conta as magnitudes e as diferenças de cada grupo.

analise da dispersao de ondas de superficie na provincia borborema, Nordeste do Brasil

The Borborema Province, Northeastern Brazil, had its internal structure investigated by different geophysical methods like gravity, magnetics and seismics. Additionally, many geological studies were also carried out to define the structural domains of this province. Despite the plethora of studies, there are still many important open aspects about its evolution. Here, we study the velocity structure of S-wave in the crust using dispersion of surface waves. The dispersion of surface waves allows an estimate of the average thickness of the crust across the region between the stations. The inversion of the velocity structure was carried out using the inter-station dispersion of surface waves of Rayleigh and Love types. The teleseismic events are mainly from the edges of the South and North American plates. The period of data collection occurred between 2007 and 2010 and we selected 7 events with magnitude above 5.0 MW and up to 40 km depth. The difference between the events back-azimuths and the interstation path was not greater than 10. We also know the depth of the Moho, results from Receiver Functions (Novo Barbosa, 2008), and use those as constrains in inversion. Even using different parameterizations of models for the inversion, our results were very similar the mean profiles velocity structure of S-wave. In pairs of stations located in the Cear´a Central Domain Borborema the province, there are ranges of depths for which the velocities of S are very close. Most of the results in the profile near the Moho complicate their interpretation at that depth, coinciding with the geology of the region, where there are many shear zones. In particular, the profile that have the route Potiguar Bacia in inter-station, had low velocities in the crust. We combine these results to the results of gravimetry and magnetometry (Oliveira, 2008) and receptor function (Novo Barbosa, 2008). We finally, the first results on the behavior of the velocity structure of S-wave with depth in the Province Borborema

Photoelastic Analysis of the Influence of Platform Switching on Stress Distribution in Implants

The aim of this study was to evaluate the stress distribution of platform switching implants using a photoelastic method. Three models were constructed of the photoelastic resin PL-2, with a single implant and a screw-retained implant-supported prosthesis. These models were Model A, platform 5.0 mm/abutment 4.1 mm; Model B, platform 4.1 mm/abutment 4.1 mm; and Model C, platform 5.00 mm/abutment 5.00 mm. Axial and oblique (45 degrees) loads of 100 N were applied using a Universal Testing Machine (EMIC DL 3000). Images were photographed with a digital camera and visualized with software (AdobePhotoshop) to facilitate the qualitative analysis. The highest stress concentrations were observed at the apical third of the 3 models. With the oblique load, the highest stress concentrations were located at the implant apex, opposite the load application. Stress concentrations decreased in the cervical region of Model A (platform switching), and Models A (platform switching) and C (conventional/wide-diameter) displayed similar stress magnitudes. Finally, Model B (conventional/regular diameter) displayed the highest stress concentrations of the models tested.

Influence of Different Base Thicknesses on Maxillary Complete Denture Processing: Linear and Angular Graphic Analysis on the Movement of Artificial Teeth

Objective: The purpose of this study was to compare the dental movement that occurs during the processing of maxillary complete dentures with 3 different base thicknesses, using 2 investment methods, and microwave polymerization.Methods: A sample of 42 denture models was randomly divided into 6 groups (n = 7), with base thicknesses of 1.25, 2.50, and 3.75 mm and gypsum or silicone flask investment. Points were demarcated on the distal surface of the second molars and on the back of the gypsum cast at the alveolar ridge level to allow linear and angular measurement using AutoCAD software. The data were subjected to analysis of variance with double factor, Tukey test and Fisher (post hoc).Results: Angular analysis of the varying methods and their interactions generated a statistical difference (P = 0.023) when the magnitudes of molar inclination were compared. Tooth movement was greater for thin-based prostheses, 1.25 mm (-0.234), versus thick 3.75 mm (0.2395), with antagonistic behavior. Prosthesis investment with silicone (0.053) showed greater vertical change compared with the gypsum investment (0.032). There was a difference between the point of analysis, demonstrating that the changes were not symmetric.Conclusions: All groups evaluated showed change in the position of artificial teeth after processing. The complete denture with a thin base (1.25 mm) and silicone investment showed the worst results, whereas intermediate thickness (2.50 mm) was demonstrated to be ideal for the denture base.

Influence of Implant Connection Type on the Biomechanical Environment of Immediately Placed Implants - CT-Based Nonlinear, Three-Dimensional Finite Element Analysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)