993 resultados para Internet monitoring
Resumo:
Presented at INForum - Simpósio de Informática (INFORUM 2015). 7 to 8, Sep, 2015. Portugal.
Resumo:
Tese apresentada para cumprimento dos requisitos necessários à obtenção do grau de Doutor em Ciências da Comunicação – Jornalismo
Resumo:
The 6loWPAN (the light version of IPv6) and RPL (routing protocol for low-power and lossy links) protocols have become de facto standards for the Internet of Things (IoT). In this paper, we show that the two native algorithms that handle changes in network topology – the Trickle and Neighbor Discovery algorithms – behave in a reactive fashion and thus are not prepared for the dynamics inherent to nodes mobility. Many emerging and upcoming IoT application scenarios are expected to impose real-time and reliable mobile data collection, which are not compatible with the long message latency, high packet loss and high overhead exhibited by the native RPL/6loWPAN protocols. To solve this problem, we integrate a proactive hand-off mechanism (dubbed smart-HOP) within RPL, which is very simple, effective and backward compatible with the standard protocol. We show that this add-on halves the packet loss and reduces the hand-off delay dramatically to one tenth of a second, upon nodes’ mobility, with a sub-percent overhead. The smart-HOP algorithm has been implemented and integrated in the Contiki 6LoWPAN/RPL stack (source-code available on-line mrpl: smart-hop within rpl, 2014) and validated through extensive simulation and experimentation.
Resumo:
Health promotion in hospital environments can be improved using the most recent information and communication technologies. The Internet connectivity to small sensor nodes carried by patients allows remote access to their bio-signals. To promote these features the healthcare wireless sensor networks (HWSN) are used. In these networks mobility support is a key issue in order to keep patients under realtime monitoring even when they move around. To keep sensors connected to the network, they should change their access points of attachment when patients move to a new coverage area along an infirmary. This process, called handover, is responsible for continuous network connectivity to the sensors. This paper presents a detailed performance evaluation study considering three handover mechanisms for healthcare scenarios (Hand4MAC, RSSI-based, and Backbone-based). The study was performed by simulation using several scenarios with different number of sensors and different moving velocities of sensor nodes. The results show that Hand4MAC is the best solution to guarantee almost continuous connectivity to sensor nodes with less energy consumption.
Resumo:
Dissertação apresentada para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Ciências da Comunicação
Resumo:
Dissertation to obtain the Master degree in Electrical Engineering and Computer Science
Resumo:
The vision of the Internet of Things (IoT) includes large and dense deployment of interconnected smart sensing and monitoring devices. This vast deployment necessitates collection and processing of large volume of measurement data. However, collecting all the measured data from individual devices on such a scale may be impractical and time consuming. Moreover, processing these measurements requires complex algorithms to extract useful information. Thus, it becomes imperative to devise distributed information processing mechanisms that identify application-specific features in a timely manner and with a low overhead. In this article, we present a feature extraction mechanism for dense networks that takes advantage of dominance-based medium access control (MAC) protocols to (i) efficiently obtain global extrema of the sensed quantities, (ii) extract local extrema, and (iii) detect the boundaries of events, by using simple transforms that nodes employ on their local data. We extend our results for a large dense network with multiple broadcast domains (MBD). We discuss and compare two approaches for addressing the challenges with MBD and we show through extensive evaluations that our proposed distributed MBD approach is fast and efficient at retrieving the most valuable measurements, independent of the number sensor nodes in the network.
Resumo:
Relatório de Estágio apresentado para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Jornalismo
Resumo:
The development and application of a polyaniline/carbon nanotube (CNT) cyclodextrin matrix (PANI-β-CD/MWCNT)-based electrochemical sensor for the quantitative determination of the herbicide 4-chloro-2-methylphenoxyacetic acid (MCPA) and its main transformation product 4-chloro-2-methylphenol in natural waters are described. A simple cyclic voltammetry-based electrochemical methodology, in phosphate buffer solution at pH 6.0, was used to develop a method to determine both MCPA and 4-chloro-2-methylphenol, without any previous extraction or derivatization steps. A linear concentration range (10 to 50 μmol L−1) and detection limits of 1.1 and 1.9 μmol L−1, respectively, were achieved using optimized cyclic voltammetric parameters. The proposed method was successfully applied to the determination of MCPA and 4-chloro-2-methylphenol in natural water samples with satisfactory recoveries (94 to 107 %) and in good agreement with the results obtained by an established high-performance liquid chromatography technique, no significant differences being found between the methods. Interferences from ionic species and other herbicides used for broad-leaf weed control were shown to be small. The newly developed methodology was also successfully applied to MCPA photodegradation environmental studies.
Resumo:
A Internet não é mais do que uma rede que liga diversos computadores espalhados por todo o mundo. Começou a ser desenvolvida na década de setenta através do Departamento de Defesa dos Estados Unidos da América, e tinha como objectivo inicial a transferência de informação entre entidades governamentais e comunidades científicas. Inicialmente foi designada por ArpaNet mas, a popularidade desta cresceu de forma a interessar a participação de universidades e empresas dedicadas à investigação científica.
Resumo:
O crescimento dos sistemas de informação e a sua utilização massiva criou uma nova realidade no acesso a experiências remotas que se encontram geograficamente distribuídas. Nestes últimos tempos, a temática dos laboratórios remotos apareceu nos mais diversos campos como o do ensino ou o de sistemas industriais de controlo e monitorização. Como o acesso aos laboratórios é efectuado através de um meio permissivo como é o caso da Internet, a informação pode estar à mercê de qualquer atacante. Assim, é necessário garantir a segurança do acesso, de forma a criar condições para que não se verifique a adulteração dos valores obtidos, bem como a existência de acessos não permitidos. Os mecanismos de segurança adoptados devem ter em consideração a necessidade de autenticação e autorização, sendo estes pontos críticos no que respeita à segurança, pois estes laboratórios podem estar a controlar equipamentos sensíveis e dispendiosos, podendo até eventualmente comprometer em certos casos o controlo e a monotorização de sistemas industriais. Este trabalho teve como objectivo a análise da segurança em redes, tendo sido realizado um estudo sobre os vários conceitos e mecanismos de segurança necessários para garantir a segurança nas comunicações entre laboratórios remotos. Dele resultam as três soluções apresentadas de comunicação segura para laboratórios remotos distribuídos geograficamente, recorrendo às tecnologias IPSec, OpenVPN e PPTP. De forma a minimizar custos, toda a implementação foi assente em software de código aberto e na utilização de um computador de baixo custo. No que respeita à criação das VPNs, estas foram configuradas de modo a permitir obter os resultados pretendidos na criação de uma ligação segura para laboratórios remotos. O pfSense mostrou-se a escolha acertada visto que suporta nativamente quaisquer das tecnologias que foram estudadas e implementadas, sem necessidade de usar recursos físicos muito caros, permitindo o uso de tecnologias de código aberto sem comprometer a segurança no funcionamento das soluções que suportam a segurança nas comunicações dos laboratórios remotos.
Resumo:
In this paper we present ezGo, an electric powered wheelchair with a speech based interface and biosignal monitoring instrumentation. The user can use the voice, a natural communication method, for controlling the chair movement and obtain information about his health. Additionally a set of semi-autonomous modes with macro recording enable the execution of navigation tasks with little effort and improved precision. The main purpose of the system is to provide severely disabled persons with an assistive device that can improve their confidence and daily independence. The obtained results on usability tests showed that users consider ezGo a valuable help on their daily tasks and a very desirable addition to standard wheelchairs.
Resumo:
We report a primary response to Toxoplasma gondii following a hematopoietic stem cell transplantation in a patient with multiple myeloma. The primary response to T. gondii was supported by IgM, IgG and IgA seroconversion. The patient was promptly treated and there were no complications related to toxoplasmosis in the subsequent months.
Resumo:
Malaria is an unusual complication after hematopoietic stem cell transplantation in non-endemic countries. However, transplant candidates, recipients and donors living in endemic regions frequently report previous episodes of malaria. This fact could represent an important risk for immunosuppressed recipients that could develop severe malaria cases. We report a case of hematopoietic stem cell transplant (HSCT) in which the donor had a history of previous malaria, and close monitoring was performed before and after procedure by parasitological and molecular tests. The donor presented Plasmodium vivax in thick blood smears one month after transplant and was treated according to Brazilian Health Ministry guidelines. The polymerase chain reaction (PCR) was able to detect malaria infection in the donor one week earlier than thick blood film. Even without positive results, the recipient was pre-emptively treated with chloroquine in order to prevent the disease. We highlight the importance of monitoring recipients and donors in transplant procedures with the aim of reducing the risk of malaria transmission.