Simplified versus traditional techniques for complete denture fabrication: A systematic review

STATEMENT OF PROBLEM: A number of methods have been described for the fabrication of complete dentures. There are 2 common ways to make conventional complete dentures: a traditional method and a simplified method. PURPOSE: The purpose of this study was to conduct a systematic review to compare the efficiency of simplified and traditional methods for the fabrication of complete dentures. MATERIAL AND METHODS: The review was conducted by 3 independent reviewers and included articles published up to December 2013. Three electronic databases were searched: MEDLINE-PubMed, The Cochrane Library, and ISI Web of Science. A manual search also was performed to identify clinical trials of simplified versus traditional fabrication of complete dentures. RESULTS: Six articles were classified as randomized controlled clinical trials and were included in this review. The majority of the selected articles analyzed general satisfaction, denture stability, chewing ability and function, comfort, hygiene, esthetics, speech function, quality of life, cost, and fabrication time. CONCLUSIONS: Although the studies reviewed demonstrate some advantages of simplified over traditional prostheses, such as lower cost and clinical time, good chewing efficiency, and a positive effect on the quality of life, the reports related the use of different simplified methods for the fabrication of complete dentures. Additional randomized controlled trials that used similar simplified techniques for the fabrication of complete dentures should be performed with larger sample sizes and longer follow-up periods.

An Examination of Lotka’s law in the Field of Library and Information Studies

The purpose of this study was to test Lotka’s law of scientific publication productivity using the methodology outlined by Pao (1985), in the field of Library and Information Studies (LIS). Lotka’s law has been sporadically tested in the field over the past 30+ years, but the results of these studies are inconclusive due to the varying methods employed by the researchers. A data set of 1,856 citations that were found using the ISI Web of Knowledge databases were studied. The values of n and c were calculated to be 2.1 and 0.6418 (64.18%) respectively. The Kolmogorov-Smirnov (K-S) one sample goodness-of-fit test was conducted at the 0.10 level of significance. The Dmax value is 0.022758 and the calculated critical value is 0.026562. It was determined that the null hypothesis stating that there is no difference in the observed distribution of publications and the distribution obtained using Lotka’s and Pao’s procedure could not be rejected. This study finds that literature in the field of library and Information Studies does conform to Lotka’s law with reliable results. As result, Lotka’s law can be used in LIS as a standardized means of measuring author publication productivity which will lead to findings that are comparable on many levels (e.g., department, institution, national). Lotka’s law can be employed as an empirically proven analytical tool to establish publication productivity benchmarks for faculty and faculty librarians. Recommendations for further study include (a) exploring the characteristics of the high and low producers; (b) finding a way to successfully account for collaborative contributions in the formula; and, (c) a detailed study of institutional policies concerning publication productivity and its impact on the appointment, tenure and promotion process of academic librarians.

Aportación científica de los congresos de la AE-IC (2008-2014): reseña histórica y estado actual de la investigación en Comunicación

Esta investigación analiza la producción científica presentada en los congresos de la Asociación Española de Investigación de la Comunicación con el fin de comprender su desarrollo y su estado actual. Para ello, se han analizado 715 comunicaciones con veintidós variables, entre las que se encuentran: el autor, el género, la vinculación institucional, la nacionalidad, el tipo de comunicación, la metodología empleada, la réplica de contenidos, la tipología descriptiva y la finalidad de las comunicaciones. Entre otros hallazgos, los resultados muestran una mayoría femenina en la contribución académica, pero no entre los cargos académicos de mayor rango; la preferencia de los objetos de estudio empresariales, pero no profesionales o laborales; una tendencia hacia la mayor participación de doctorandos; y una elevada concentración de la producción científica en cuanto a la temática y la distribución territorial.

Análisis de la producción científica de los arquitectos técnicos docentes universitarios en España. 1980-2015. Estudio de revistas indizadas en WOS-SCOPUS-CSIC (ICYT-ISOC)

Se estudia la producción científica de los Arquitectos Técnicos docentes universitarios en España en los últimos 35 años ya que el cambio del título académico al de Grado, el aumento del número de doctores y el desarrollo de una política académica que ha convertido en parámetro especial para medir la calidad de la Universidad la cantidad y calidad de los artículos publicados han propiciado un cambio sustancial en esta área del conocimiento. Se determina la investigación producida a través del análisis de las bases de datos WOS-SCOPUS-CSIC(ICYT-ISOC) y las revistas más utilizadas por esta disciplina y se analiza el número de publicaciones de este colectivo por Universidades y revistas. El estudio llevado a cabo evidencia un cambio sustancial en la producción científica de los arquitectos técnicos en España.

Análisis y reformulación de la organización del conocimiento en las Ciencias de la Comunicación: aplicación para la codificación UNESCO

Se estudia la codificación y organización del campo de las Ciencias de la Comunicación, fundamentalmente los códigos Unesco. El objetivo es plantear un cambio en estos códigos, puesto que la forma de clasificar y organizar un dominio científico tiene consecuencias de naturaleza operativa y epistemológica en el propio trabajo científico. En este trabajo se estudia la clasificación actual, que muestra una presencia escasa y dispersa de los términos vinculados a Comunicación. Se describen las dificultades prácticas y teóricas que conlleva su reorganización, las posibles fuentes (planes de estudio, congresos, revistas científicas, propuestas documentales y palabras clave) y los métodos de trabajo que se pueden emplear, tomando como bases teóricas el dominio de la Organización del Conocimiento y el de la Comunicación. Por último, se analizan dos ámbitos disciplinares diferentes (Historia de la Comunicación y Tecnologías de la Comunicación), mediante la información recogida, en una base de datos, de asignaturas en grado y en másteres oficiales de 12 universidades españolas. También se observa que este tipo de propuesta requiere el conocimiento derivado de instrumentos documentales como las clasificaciones y los tesauros.

Sustainable Catalysis : Rational Pd Loading on MIL-101Cr-NH2 for More Efficient and Recyclable Suzuki-Miyaura Reactions

Palladium nanoparticles have been immobilized into an amino-functionalized metal-organic framework (MOF), MIL-101Cr-NH2, to form Pd@MIL-101Cr-NH2. Four materials with different loadings of palladium have been prepared (denoted as 4-, 8-, 12-, and 16wt%Pd@MIL-101Cr-NH2). The effects of catalyst loading and the size and distribution of the Pd nanoparticles on the catalytic performance have been studied. The catalysts were characterized by using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier-transform infrared (FTIR) spectroscopy, powder X-ray diffraction (PXRD), N-2-sorption isotherms, elemental analysis, and thermogravimetric analysis (TGA). To better characterize the palladium nanoparticles and their distribution in MIL-101Cr-NH2, electron tomography was employed to reconstruct the 3D volume of 8wt%Pd@MIL-101Cr-NH2 particles. The pair distribution functions (PDFs) of the samples were extracted from total scattering experiments using high-energy X-rays (60keV). The catalytic activity of the four MOF materials with different loadings of palladium nanoparticles was studied in the Suzuki-Miyaura cross-coupling reaction. The best catalytic performance was obtained with the MOF that contained 8wt% palladium nanoparticles. The metallic palladium nanoparticles were homogeneously distributed, with an average size of 2.6nm. Excellent yields were obtained for a wide scope of substrates under remarkably mild conditions (water, aerobic conditions, room temperature, catalyst loading as low as 0.15mol%). The material can be recycled at least 10times without alteration of its catalytic properties.

Opening discourses of citizenship education : a theorization with Foucault

We argue two major difficulties in current discourses of citizenship education. The first is a relative masking of student discourses of citizenship by positioning students as lacking citizenship and as outside the community that acts. The second is in failing to understand the discursive and material support for citizenship activity. We, thus, argue that it is not a lack of citizenship that education research might address, but identification and exploration of the different forms of citizenship that students already engage in. We offer a fragmentary, poststructuralist theorization oriented to explore the contemporary limits of the necessary', drawing on specific resources from the work of Michel Foucault and others for the constitution of local, partial accounts of citizenship discourses and activities, and exploration of their possibilities and constraints. We argue this as a significant tactic of theorization in support of an opening of discourses of citizenship and in avoiding the discursive difficulties that we have identified. Our theorization, then, is significant in its potential to unsettle discourses that confine contemporary thought regarding citizenship education and support exploration of what might be excessive to that confinement.

Student's second-language grade may depend on classroom listening position

The purpose of this experiment was to explore whether listening positions (close or distant location from the sound source) in the classroom, and classroom reverberation, influence students' score on a test for second-language (L2) listening comprehension (i.e., comprehension of English in Swedish speaking participants). The listening comprehension test administered was part of a standardized national test of English used in the Swedish school system. A total of 125 high school pupils, 15 years old, participated. Listening position was manipulated within subjects, classroom reverberation between subjects. The results showed that L2 listening comprehension decreased as distance from the sound source increased. The effect of reverberation was qualified by the participants' baseline L2 proficiency. A shorter reverberation was beneficial to participants with high L2 proficiency, while the opposite pattern was found among the participants with low L2 proficiency. The results indicate that listening comprehension scores-and hence students' grade in English-may depend on students' classroom listening position.

The importance of patient involvement in stroke rehabilitation

OBJECTIVE: To investigate the perceived needs for health services by persons with stroke within the first year after rehabilitation, and associations between perceived impact of stroke, involvement in decisions regarding care/treatment, and having health services needs met. METHOD: Data was collected, through a mail survey, from patients with stroke who were admitted to a university hospital in 2012 and had received rehabilitation after discharge from the stroke unit. The rehabilitation lasted an average of 2 to 4.6 months. The Stroke Survivor Needs Survey Questionnaire was used to assess the participants' perceptions of involvement in decisions on care or treatment and needs for health services in 11 problem areas: mobility, falls, incontinence, pain, fatigue, emotion, concentration, memory, speaking, reading, and sight. The perceived impact of stroke in eight areas was assessed using the Stroke Impact Scale (SIS) 3.0. Eleven logistic regression models were created to explore associations between having health services needs met in each problem area respectively (dependent variable) and the independent variables. In all models the independent variables were: age, sex, SIS domain corresponding to the dependent variable, or stroke severity in cases when no corresponding SIS domain was identified, and involvement in decisions on care and treatment. RESULTS: The 63 participants who returned the questionnaires had a mean age of 72 years, 33 were male and 30 were female. Eighty percent had suffered a mild stroke. The number of participants who reported problems varied between 51 (80%, mobility) and 24 (38%, sight). Involvement in decisions on care and treatment was found to be associated with having health services needs met in six problem areas: falls, fatigue, emotion, memory, speaking, and reading. CONCLUSIONS: The results highlight the importance of involving patients in making decisions on stroke rehabilitation, as it appears to be associated with meeting their health services needs.

Response process and test-retest reliability of the Context Assessment for Community Health tool in Vietnam

BACKGROUND: The recently developed Context Assessment for Community Health (COACH) tool aims to measure aspects of the local healthcare context perceived to influence knowledge translation in low- and middle-income countries. The tool measures eight dimensions (organizational resources, community engagement, monitoring services for action, sources of knowledge, commitment to work, work culture, leadership, and informal payment) through 49 items. OBJECTIVE: The study aimed to explore the understanding and stability of the COACH tool among health providers in Vietnam. DESIGNS: To investigate the response process, think-aloud interviews were undertaken with five community health workers, six nurses and midwives, and five physicians. Identified problems were classified according to Conrad and Blair's taxonomy and grouped according to an estimation of the magnitude of the problem's effect on the response data. Further, the stability of the tool was examined using a test-retest survey among 77 respondents. The reliability was analyzed for items (intraclass correlation coefficient (ICC) and percent agreement) and dimensions (ICC and Bland-Altman plots). RESULTS: In general, the think-aloud interviews revealed that the COACH tool was perceived as clear, well organized, and easy to answer. Most items were understood as intended. However, seven prominent problems in the items were identified and the content of three dimensions was perceived to be of a sensitive nature. In the test-retest survey, two-thirds of the items and seven of eight dimensions were found to have an ICC agreement ranging from moderate to substantial (0.5-0.7), demonstrating that the instrument has an acceptable level of stability. CONCLUSIONS: This study provides evidence that the Vietnamese translation of the COACH tool is generally perceived to be clear and easy to understand and has acceptable stability. There is, however, a need to rephrase and add generic examples to clarify some items and to further review items with low ICC.

Investigation of material transfer in sliding friction-topography or surface chemistry?

To differentiate between the roles of surface topography and chemical composition on influencing friction and transfer in sliding contact, a series of tests were performed in situ in an SEM. The initial sliding during metal forming was investigated, using an aluminum tip representing the work material, put into sliding contact with a polished flat tool material. Both DLC-coated and uncoated tool steel was used. By varying the final polishing step of the tool material, different surface topographies were obtained. The study demonstrates the strong influence from nano topography of an unpolished DLC coated surface on both coefficient of friction and material transfer. The influence of tool surface chemistry is also discussed.

Movies and the Enchanted Mind : Emotional Comprehension and Spiritual Meaning Making Among Young Adults in Contemporary Sweden

The outcome of an empirical audience study in Sweden including questionnaires, focus groups and ten in-depth individual interviews discussing favorite films supports claims about viewers as active and playful (cf. Frampton 2006, Hoover 2006, Plantinga 2009). The soft side of mediatization processes is illustrated showing young adults experiencing enchantment through films (Jerslev 2006, Partridge 2008, Klinger 2008, Oliver & Hartmann 2010). The outcome is in line with a growing number of empirical case studies which support conclusions that both thinking and behavior are affected by film watching (Marsh 2007, Suckfüll 2010, Oliver & Hartmann 2010, Axelson 2014). The results of the interviews exploring specific scenes of idiosyncratic relevance support theories about fiction films as important sources for moral and spiritual reflection (Partridge 2004, Zillman 2005, Lynch 2007, Plantinga 2009).  The concept thick viewing is proposed for capturing these moments of film experience when profound and enchanted emotional interpretations take place.

LDA-TM : A two-step approach to twitter topic data clustering

The Twitter System is the biggest social network in the world, and everyday millions of tweets are posted and talked about, expressing various views and opinions. A large variety of research activities have been conducted to study how the opinions can be clustered and analyzed, so that some tendencies can be uncovered. Due to the inherent weaknesses of the tweets - very short texts and very informal styles of writing - it is rather hard to make an investigation of tweet data analysis giving results with good performance and accuracy. In this paper, we intend to attack the problem from another aspect - using a two-layer structure to analyze the twitter data: LDA with topic map modelling. The experimental results demonstrate that this approach shows a progress in twitter data analysis. However, more experiments with this method are expected in order to ensure that the accurate analytic results can be maintained.