Pedagogical quality in e-learning

The article is concerned with design and use of e-learning technology to develop education qualitatively. The purpose is to develop a framework for a pedagogical evaluation of e-learning technology. The approach is that evaluation and design must be grounded in a learning theoretical approach, and it is argued that it is necessary to make a reflection of technology in relation to activities, learning principles, and a learning theory in order to qualitatively develop education. The article presents three frameworks developed on the basis of cognitivism, radical constructivism and activity theory. Finally, on the basis of the frameworks, the article discusses e-learning technology and, more specifically, design of virtual learning environments and learning objects. It is argued that e-learning technology is not pedagogically neutral, and that it is therefore necessary to focus on design of technology that explicitly supports a certain pedagogical approach. Further, it is argued that design should direct its focus away from organisation of content and towards design of activities.

Software als Schutzgegenstand des Europäischen Urheberrechts

After 20 years of silence, two recent references from the Czech Republic (Bezpečnostní softwarová asociace, Case C-393/09) and from the English High Court (SAS Institute, Case C-406/10) touch upon several questions that are fundamental for the extent of copyright protection for software under the Computer Program Directive 91/25 (now 2009/24) and the Information Society Directive 2001/29. In Case C-393/09, the European Court of Justice held that “the object of the protection conferred by that directive is the expression in any form of a computer program which permits reproduction in different computer languages, such as the source code and the object code.” As “any form of expression of a computer program must be protected from the moment when its reproduction would engender the reproduction of the computer program itself, thus enabling the computer to perform its task,” a graphical user interface (GUI) is not protected under the Computer Program Directive, as it does “not enable the reproduction of that computer program, but merely constitutes one element of that program by means of which users make use of the features of that program.” While the definition of computer program and the exclusion of GUIs mirror earlier jurisprudence in the Member States and therefore do not come as a surprise, the main significance of Case C-393/09 lies in its interpretation of the Information Society Directive. In confirming that a GUI “can, as a work, be protected by copyright if it is its author’s own intellectual creation,” the ECJ continues the Europeanization of the definition of “work” which began in Infopaq (Case C-5/08). Moreover, the Court elaborated this concept further by excluding expressions from copyright protection which are dictated by their technical function. Even more importantly, the ECJ held that a television broadcasting of a GUI does not constitute a communication to the public, as the individuals cannot have access to the “essential element characterising the interface,” i.e., the interaction with the user. The exclusion of elements dictated by technical functions from copyright protection and the interpretation of the right of communication to the public with reference to the “essential element characterising” the work may be seen as welcome limitations of copyright protection in the interest of a free public domain which were not yet apparent in Infopaq. While Case C-393/09 has given a first definition of the computer program, the pending reference in Case C-406/10 is likely to clarify the scope of protection against nonliteral copying, namely in how far the protection extends beyond the text of the source code to the design of a computer program and where the limits of protection lie as regards the functionality of a program and mere “principles and ideas.” In light of the travaux préparatoires, it is submitted that the ECJ is also likely to grant protection for the design of a computer program, while excluding both the functionality and underlying principles and ideas from protection under the European copyright directives.

Vergleich von Softwarelösungen für die Ökobilanzierung – eine softwareergonomische Analyse

Ökobilanzierung von Produktsystemen dient der Abschätzung ihrer Wirkung auf die Umwelt. Eine vollständige Lebenswegbetrachtung erfordert auch die Einbeziehung intralogistischer Transportprozesse bzw. -mittel. Für die Erstellung von Ökobilanzen wird i. d. R. ein Computerprogramm verwendet. Die Demoversionen dreier kommerzieller Softwarelösungen (SimaPro, GaBi und Umberto NXT LCA) und die Vollversion einer Open Source Software (openLCA) wurden aus softwareergonomischer Sicht analysiert. Hierzu erfolgte u. a. der Nachbau der bereitgestellten Tutorials bzw. die Modellierung eigener Produktsysteme. Im Rahmen der Analyse wurden die Punkte • Entstehung, Verbreitung, Zielgruppe, • Eignung der Tutorials, Erlernbarkeit, • Grafische Benutzeroberfläche, Individualisierbarkeit der Software, • Umsetzung der Anforderungen aus den Ökobilanzierungsnormen, • Notwendige Arbeitsschritte zur Erstellung einer Ökobilanz einer vergleichenden Betrachtung unterzogen. Der Beitrag beinhaltet eine Einführung in die wesentlichen Prinzipien der Ökobilanzierung und die Grundsätze der Softwareergonomie. Diese werden zu softwareergonomischen Eigenschaften für Ökobilanzsoftwarelösungen subsumiert. Anschließend werden die Ergebnisse des Softwarevergleiches dargestellt. Abschließend erfolgt eine Zusammenfassung der Erkenntnisse.

Amplitude, Topographie und Latenz von EKP-Komponenten analysiert mit Hilfe von Randomisierungsstatistiken: Ein anwendungsorientierter Ragu-Workshop

Bei EKP-Experimenten ist oft nicht von vornherein klar, in welchen Zeitfenstern Effekte erwartet werden. Daher müssen Analysen die Daten über mehrere Zeitfenster hinweg explorieren. Darüber hinaus sind statistische Analysen, die alle Elektroden berücksichtigen, wünschenswert, aber nicht trivial. Zur Lösung dieser Probleme präsentieren wir hier das Programm Ragu (Randomization Graphical User interface), das spezifisch für die statistische Auswertung von Mehrkanal EEG-Experimenten eingesetzt werden kann. Ragu soll Wissenschaftlern die Möglichkeit geben, die Signifikanzen von EKP-Effekten global zu untersuchen, ohne die Notwendigkeit von A-Priori-Annahmen. Das Programm basiert auf der Messung von Feldstärke-Differenzen unter Berücksichtigung aller Elektroden. Im ersten Teil dieses Workshops werden wir die Notwendigkeit von topografischen ERP-Analysen angesichts des Volumenleitungsproblems herausarbeiten und Vergleiche zu Einzelelektroden-Ansätzen anstellen. Wir werden an Hand unserer frei erhältlichen in-house Software Ragu das Prinzip von Randomisierungsstatistiken erklären und deren unterschiedliche Anwendungsmöglichkeiten für ERP-Analysen. In einem zweiten Teil haben die Teilnehmenden die Gelegenheit, Ragu an einem Beispielsatz auszuprobieren und Möglichkeiten der Anwendung von Ragu in ihrer eigenen Forschungs zu besprechen.

Digital Personal Assistant for Cognitive Cities: A Paper Prototype

This chapter presents an evaluation and initial testing of a meta-application (meta-app) for enhanced communication and improved interaction (e.g., appointment scheduling) between stakeholders (e.g., citizens) in cognitive cities. The underlying theoretical models as well as the paper prototype are presented to ensure the comprehensibility of the user interface. This paper prototype of the meta-app was evaluated through interviews with various experts in different fields (e.g., a strategic consultant, a small and medium-sized enterprises cofounder in the field of online marketing, an IT project leader, and an innovation manager). The results and implications of the evaluation show that the idea behind this meta-app has the potential to improve the living standards of citizens and to lead to a next step in the realization and maturity of the meta-app. The meta-app helps citizens more effectively manage their time and organize their personal schedules and thus allows them to have more leisure time and take full advantage of it to ensure a good work-life balance to enable them to be the most efficient and productive during their working time.

NOVEL PHANTOMS AND POST-PROCESSING FOR DIFFUSION SPECTRUM IMAGING

High Angular Resolution Diffusion Imaging (HARDI) techniques, including Diffusion Spectrum Imaging (DSI), have been proposed to resolve crossing and other complex fiber architecture in the human brain white matter. In these methods, directional information of diffusion is inferred from the peaks in the orientation distribution function (ODF). Extensive studies using histology on macaque brain, cat cerebellum, rat hippocampus and optic tracts, and bovine tongue are qualitatively in agreement with the DSI-derived ODFs and tractography. However, there are only two studies in the literature which validated the DSI results using physical phantoms and both these studies were not performed on a clinical MRI scanner. Also, the limited studies which optimized DSI in a clinical setting, did not involve a comparison against physical phantoms. Finally, there is lack of consensus on the necessary pre- and post-processing steps in DSI; and ground truth diffusion fiber phantoms are not yet standardized. Therefore, the aims of this dissertation were to design and construct novel diffusion phantoms, employ post-processing techniques in order to systematically validate and optimize (DSI)-derived fiber ODFs in the crossing regions on a clinical 3T MR scanner, and develop user-friendly software for DSI data reconstruction and analysis. Phantoms with a fixed crossing fiber configuration of two crossing fibers at 90° and 45° respectively along with a phantom with three crossing fibers at 60°, using novel hollow plastic capillaries and novel placeholders, were constructed. T2-weighted MRI results on these phantoms demonstrated high SNR, homogeneous signal, and absence of air bubbles. Also, a technique to deconvolve the response function of an individual peak from the overall ODF was implemented, in addition to other DSI post-processing steps. This technique greatly improved the angular resolution of the otherwise unresolvable peaks in a crossing fiber ODF. The effects of DSI acquisition parameters and SNR on the resultant angular accuracy of DSI on the clinical scanner were studied and quantified using the developed phantoms. With a high angular direction sampling and reasonable levels of SNR, quantification of a crossing region in the 90°, 45° and 60° phantoms resulted in a successful detection of angular information with mean ± SD of 86.93°±2.65°, 44.61°±1.6° and 60.03°±2.21° respectively, while simultaneously enhancing the ODFs in regions containing single fibers. For the applicability of these validated methodologies in DSI, improvement in ODFs and fiber tracking from known crossing fiber regions in normal human subjects were demonstrated; and an in-house software package in MATLAB which streamlines the data reconstruction and post-processing for DSI, with easy to use graphical user interface was developed. In conclusion, the phantoms developed in this dissertation offer a means of providing ground truth for validation of reconstruction and tractography algorithms of various diffusion models (including DSI). Also, the deconvolution methodology (when applied as an additional DSI post-processing step) significantly improved the angular accuracy of the ODFs obtained from DSI, and should be applicable to ODFs obtained from the other high angular resolution diffusion imaging techniques.

Large-Area Photo-Mosaicking tool (LAPM tool)

This paper presents a new tool for large-area photo-mosaicking (LAPM tool). This tool was developed specifically for the purpose of underwater mosaicking, and it is aimed at providing end-user scientists with an easy and robust way to construct large photo-mosaics from any set of images. It is notably capable of constructing mosaics with an unlimited number of images on any modern computer (minimum 1.30 GHz, 2 GB RAM). The mosaicking process can rely on both feature matching and navigation data. This is complemented by an intuitive graphical user interface, which gives the user the ability to select feature matches between any pair of overlapping images. Finally, mosaic files are given geographic attributes that permit direct import into ArcGIS. So far, the LAPM tool has been successfully used to construct geo-referenced photo-mosaics with photo and video material from several scientific cruises. The largest photo-mosaic contained more than 5000 images for a total area of about 105,000 m**2. This is the first article to present and to provide a finished and functional program to construct large geo-referenced photo-mosaics of the seafloor using feature detection and matching techniques. It also presents concrete examples of photo-mosaics produced with the LAPM tool.

Mejora de la interfaz del simulador de voz Vox

A partir de un simulador de vocales denominado Vox, programado en MATLAB, desarrollado originalmente en la Universidad Técnica de Aquisgrán por Malte Kob [1] y mejorado en el Departamento de ICS de la EUITT [2], se pueden generar voces sintéticas. La principal limitación del simulador es que sólo puede generar vocales sintéticas, además la simulación se realiza a partir de parámetros anatómicos y fisiológicos fijos. La estructura actual del programa dificulta la modificación rápida de cualquiera de los parámetros básicos de la misma, circunstancia que podría mejorar mediante una interfaz gráfica. El proyecto consistirá, por un lado, en completar el simulador haciendo posible también la síntesis a partir de los parámetros anatómicos de hombres, mujeres y niños; y por otro, en el diseño e implementación de una interfaz gráfica de usuario que nos permita seleccionar los diferentes parámetros físicos para la simulación y recoger los resultados de la misma de manera más sencilla. Starting from a vowels simulator called Vox, programmed in MATLAB, originally developed in the Technical college of Aquisgrán by Malte Kob [1] and improved in the ICS Department of the EUITT [2], with this programme you can generate synthetic voices. The main limitation of the simulator is that it only can generate synthetic vowels; moreover the simulation is made from anatomical and physiological fixed parameters. The current structure of the programme complicates the quick modification of any of the basic parameters of it, circumstance that could be improved through a graphic interface. On the one hand, the project consists in completing the simulator doing the synthesis possible, from the anatomical woman, men and children parameters; on the other hand, the design and implementation of a graphic user interface, that allow us to select different physical parameters to the simulation and gather the results of it in a simple way.

Desarrollo de una GUI para el estudio de Sistemas de Comunicaciones Ópticas

El peso específico de las Comunicaciones Ópticas dentro del ámbito de la Ingeniería de Telecomunicación no cesa de crecer. Sus aplicaciones, inicialmente dedicadas a las grandes líneas que enlazan las centrales de conmutación, alcanzan en la actualidad, como se ha mencionado, hasta los mismos hogares. Los progresos en este campo, con una sucesión sin tregua, no sólo se destinan a incrementar la capacidad de transmisión de los sistemas, sino a ampliar la diversidad de los procesos que sobre las señales se efectúan en el dominio óptico. Este dinamismo demanda a los profesionales del sector una revisión y actualización de sus conocimientos que les permitan resolver con soltura las cuestiones de su actividad de ingeniería. Por otra parte, durante los últimos años la importancia de las Comunicaciones Ópticas también se ha reflejado en las diferentes titulaciones de Ingenierías de Telecomunicación, cuyos planes de estudio contemplan esta materia tanto en asignaturas troncales como optativas. A menudo, las fuentes de información disponibles abordan esta disciplina con una orientación principalmente teórica. Profesionales y estudiantes de Ingeniería, pues, frente a esta materia se encuentran unos temas que tratan fenómenos físicos complejos, abundantes en conceptos abstractos y con un florido aparato matemático, pero muchas veces carentes de una visión práctica, importantísima en ingeniería, y que es, en definitiva, lo que se exige a alumnos e ingenieros: saber resolver problemas y cuestiones relacionados con las Comunicaciones Ópticas. Los sistemas de comunicaciones ópticas, y en especial aquellos que utilizan la fibra óptica como medio para la transmisión de información, como se ha dicho, están alcanzando un desarrollo importante en el campo de las telecomunicaciones. Las bondades que ofrece la fibra, de sobra conocidos y mencionados en el apartado que antecede (gran ancho de banda, inmunidad total a las perturbaciones de origen electromagnético, así como la no producción de interferencias, baja atenuación, etc.), han hecho que, hoy en día, sea uno de los campos de las llamadas tecnologías de la información y la comunicación que presente mayor interés por parte de científicos, ingenieros, operadores de telecomunicaciones y, por supuesto, usuarios. Ante esta realidad, el objetivo y justificación de la realización de este proyecto, por tanto, no es otro que el de acercar esta tecnología al futuro ingeniero de telecomunicaciones, y/o a cualquier persona con un mínimo de interés en este tema, y mostrarle de una forma práctica y visual los diferentes fenómenos que tienen lugar en la transmisión de información por medio de fibra óptica, así como los diferentes bloques y dispositivos en que se divide dicha comunicación. Para conseguir tal objetivo, el proyecto fin de carrera aquí presentado tiene como misión el desarrollo de una interfaz gráfica de usuario (GUI, del inglés Graphic User Interface) que permita a aquel que la utilice configurar de manera sencilla cada uno de los bloques en que se compone un enlace punto a punto de fibra óptica. Cada bloque en que se divide este enlace estará compuesto por varias opciones, que al elegir y configurar como se quiera, hará variar el comportamiento del sistema y presentará al usuario los diferentes fenómenos presentes en un sistema de comunicaciones ópticas, como son el ruido, la dispersión, la atenuación, etc., para una mejor comprensión e interiorización de la teoría estudiada. Por tanto, la aplicación, implementada en MATLAB, fruto de la realización de este PFC pretende servir de complemento práctico para las asignaturas dedicadas al estudio de las comunicaciones ópticas a estudiantes en un entorno amigable e intuitivo. Optical Communications in the field of Telecommunications Engineering continues to grow. Its applications, initially dedicated to large central lines that link the switching currently achieved, as mentioned, to the same household nowadays. Progress in this field, with a relentless succession, not only destined to increase the transmission capacity of the systems, but to broaden the diversity of the processes that are performed on the signals in the optical domain. This demands to professionals reviewing and updating their skills to enable them resolve issues easily. Moreover, in recent years the importance of optical communications is also reflected in the different degrees of Telecommunications Engineering, whose curriculum contemplates this area. Often, the information sources available to tackle this discipline mainly theoretical orientation. Engineering professionals and students are faced this matter are few topics discussing complex physical phenomena, and abstract concepts abundant with a flowery mathematical apparatus, but often wotput a practical, important in engineering, and that is what is required of students and engineers: knowing how to solve problems and issues related to optical communications. Optical communications systems, particularly those using optical fiber as a medium for transmission of information, as stated, are reaching a significant development in the field of telecommunications. The advantages offered by the fiber, well known and referred to in the preceding paragraph (high bandwidth, immunity to electromagnetic disturbances of origin and production of non interference, low attenuation, etc..), have made today, is one of the fields of information and communication technology that this increased interest by scientists, engineers, telecommunications operators and, of course, users. Given this reality, the purpose and justification of this project is not other than to bring this technology to the future telecommunications engineer, and / or anyone with a passing interest in this subject, and showing of a practical and various visual phenomena occurring in the transmission of information by optical fiber, as well as different blocks and devices in which said communication is divided. To achieve that objective, the final project presented here has as its mission the development of a graphical user interface (GUI) that allows the user to configure each of the blocks in which divided a point-to-point optical fiber. Each block into which this link will consist of several options to choose and configure it as you like, this will change the behavior of the system and will present to the user with the different phenomena occurring in an optical communication system, such as noise, dispersion, attenuation, etc., for better understanding and internalization of the theory studied. Therefore, the application, implemented in MATLAB, the result of the completion of the thesis is intended to complement practical subjects for the study of optical communications students in a friendly and intuitive environment.

Understanding HCI policy in Spain in the context of acces

Spain pioneered policies related to disability and accessibility, especially in the physical environment. The first major piece of legislation was Act 13/1982 on the Social Integration of People with Disabilities. The law was published just a few years after the reinstitution of democracy in Spain in 1977 and the approval of the Spanish Constitution in 1978. Act 13/1982 is a general law that applies accessibility to social services and education, as well as to workplace and physical accessibility. This law targeted first and foremost the social integration of people with disabilities, and it was a significant success, especially in the field of employment, as it made it mandatory for private companies and public administrations to employ a certain percentage of persons with disabilities. This greatly increased the employability of people with disabilities, as highlighted in a document celebrating 30 years of Act 13/1982. Over the past 20 years, policy makers have also focused on accessibility to information and communication technologies (ICT), developing first the national computing accessibility standards and then specialized legislation. Initially, Spanish activities were mostly national but have now gained an international dimension. All these initiatives are strongly related to the discipline of human-computer interaction, as the key component of an accessible system is its user interface.

Thermal food processing optimization: Algorithms and software

The algorithms and graphic user interface software package ?OPT-PROx? are developed to meet food engineering needs related to canned food thermal processing simulation and optimization. The adaptive random search algorithm and its modification coupled with penalty function?s approach, and the finite difference methods with cubic spline approximation are utilized by ?OPT-PROx? package (http://tomakechoice. com/optprox/index.html). The diversity of thermal food processing optimization problems with different objectives and required constraints are solvable by developed software. The geometries supported by the ?OPT-PROx? are the following: (1) cylinder, (2) rectangle, (3) sphere. The mean square error minimization principle is utilized in order to estimate the heat transfer coefficient of food to be heated under optimal condition. The developed user friendly dialogue and used numerical procedures makes the ?OPT-PROx? software useful to food scientists in research and education, as well as to engineers involved in optimization of thermal food processing.

Design and modeling of the multi-agent robotic system: SMART

This article presents the design, kinematic model and communication architecture for the multi-agent robotic system called SMART. The philosophy behind this kind of system requires the communication architecture to contemplate the concurrence of the whole system. The proposed architecture combines different communication technologies (TCP/IP and Bluetooth) under one protocol designed for the cooperation among agents and other elements of the system such as IP-Cameras, image processing library, path planner, user Interface, control block and data block. The high level control is modeled by Work-Flow Petri nets and implemented in C++ and C♯♯. Experimental results show the performance of the designed architecture.

Implementación de un sistema multicanal de medida de temperatura con termopares

Este proyecto fin de carrera tiene como finalidad el diseño e implementación de un sistema multicanal de medida de temperaturas con termopares con procesado digital. Se ha realizado un prototipo de cuatro canales con conexión de termopar, que es el tipo de sensor utilizado para realizar dichas medidas. La tensión generada por el termopar es procesada mediante un conversor de termopar a digital con salida en interfaz modo serie o SPI (Serial Peripheral Interface). El control de dicha comunicación se realiza por medio de un Array de Puertas Lógicas Programables o FPGA (Field Programmable Gate Array), en concreto se ha utilizado una plataforma de desarrollo modelo Virtex-5 de la empresa Xilinx. Esta tarjeta se ha programado también para el procesado software y la posterior comunicación serie con el PC, el cual consta de una interfaz de usuario donde se muestran los resultados de las medidas en tiempo real. El proyecto ha sido desarrollado en colaboración con una empresa privada dedicada principalmente al diseño electrónico. La finalidad de este prototipo es el estudio de una actualización del bloque de medida para el control de las curvas de temperatura de un equipo de reparación aeronáutica. En esta memoria se describe el proceso realizado para el desarrollo del prototipo, incluye la presentación de los estudios realizados y la información necesaria para llevar a cabo el diseño, la fabricación y la programación de los diferentes bloques que componen el sistema. ABSTRACT. The aim of this project is to implement a multichannel temperature measurement system with digital processing, using thermocouples. A four-channel prototype with thermocouple connection has been built. The thermocouple voltage is converted to digital line using a Thermocouple-to-Digital Converter with a Serial Perpheral Interface (SPI) output. The master which controls this communication is embedded in a Field Programmable Gate Array (FPGA), specifically the Xilinx Virtex-5 model. This FPGA also has the code for software temperature processing and the prototype to PC serial communication embedded. The PC user interface displays the measurement results in real time. This project has been developed at a private electronics design company. The company wants to study an update to change the analogue temperature controller equipment to a digital one. So this prototype studies a digital version of the temperature measurement block. The processes accomplished for the prototype development are detailed in the next pages of this document. It includes the studies and information needed to develop the design, manufacturing process and programming of the blocks which integrate with the global system.

Caracterización e instrumentación de sensores de ultrasonidos

El propósito de este proyecto de �fin de carrera es la caracterización e instrumentación de un sensor de ultrasonidos modelado por el tutor de este proyecto: Don César Briso Rodrí��guez. Una vez realizado el modelado de dicho sensor, simulando tanto sus caracter�í�sticas f�í�sicas, como sus caracterí��sticas eléctricas, se procede a la intrumentación y uso del mismo. La parte de intrumentaci�ón incluye tanto la electrónica que ser��á necesaria para la excitación del piezoeléctrico, en el modo de emisi�ón, como para la recepción de los pulsos el�éctricos generados por el sensor, como respuesta a los ecos recibidos, y su adecuación a niveles de señal correctos para la adquisici�ón, en el modo de escucha. Tras la adecuaci�ón de las señales para la adquisici�ón, éstas ser�án digitalizadas, tratadas y representadas por pantalla en un PC, a trav�es de una tarjeta de adquisición de datos por puerto USB encargada del muestreo de las señales de respuesta ya tratadas y su posterior enví��o al software de control y representaci�ón desarrollado en este proyecto. El entorno de usuario, el software de control de la tarjeta de adquisición y el software de tratamiento y representaci�ón se ha desarrollado con Visual Basic 2008 y las utilidades gr�áfi�cas de las librer��ías OpenGL. ABSTRACT The purpose of this project is to limit the characterization and implementation of an ultrasonic sensor modeled by Mr. C�ésar Briso Rodr��íguez. Once the sensor modeling by simulating physical characteristics and electrical characteristics, we proceed to the instrumentation and use. This section includes electronic instrumentation that would be necessary for the piezoelectric excitation in the emission mode and for receiving electrical pulses generated by the sensor in response to the received echoes, and matching signal levels right to acquire, in the reception mode. After the adjustment of the signals for the acquisition, these signals will be digitalized, processed and represented on the screen on a PC through a data acquisition card by USB port. Acquisition card is able to sample the response signals and transmit the samples to representation and control software developed in this project. The user interface, the acquisition card control software and processing and representation software has been developed with Visual Basic 2008 and OpenGL graphical libraries.

Aspects of a phased array radar feed and bias network design

Radar technologies have been developed to improve the efficiency when detecting targets. Radar is a system composed by several devices connected and working together. Depending on the type of radar, the improvements are focused on different functionalities of the radar. One of the most important devices composing a radar is the antenna, that sends the radio-frequency signal to the space in order to detect targets. This project is focused on a specific type of radar called phased array radar. This type of radar is characterized by its antenna, which consist on a linear array of radiating elements, in this particular case, eight dipoles working at the frequency band S. The main advantage introduced by the phased array antenna is that using the fundamentals of arrays, the directivity of the antenna can change by shifting the phase of the signal at the input of each radiating element. This can be done using phase shifters. Phase shifter consists on a device which produces a phase shift in the radio-frequency input signal depending on a control DC voltage. Using a phased array antenna allows changing the directivity of the antenna without a mechanical rotating system. The objective of this project is to design the feed network and the bias network of the phased antenna. The feed network consists on a parallel-fed network composed by power dividers that sends the radio-frequency signal from the source to each radiating element of the antenna. The bias network consists on a system that generates the control DC voltages supplied to the phase shifters in order to change the directivity. The architecture of the bias network is composed by a software, implemented in Matlab and run in a laptop which is connected to a micro-controller by a serial communication port. The software calculates the control DC voltages needed to obtain a determined directivity or scan angle. These values are sent by the serial communication port to the micro-controller as data. Then the micro-controller generates the desired control DC voltages and supplies them to the phase shifters. In this project two solutions for bias network are designed. Each one is tested and final conclusions are obtained to determine the advantages and disadvantages. Finally a graphic user interface is developed in order to make the system easy to use. RESUMEN. Las tecnologías empleadas por lo dispositivos radar se han ido desarrollando para mejorar su eficiencia y usabilidad. Un radar es un sistema formado por varios subsistemas conectados entre sí. Por lo que dependiendo del tipo de radar las mejoras se centran en los subsistemas correspondientes. Uno de los elementos más importantes de un radar es la antena. Esta se emplea para enviar la señal de radiofrecuencia al espacio y así poder detectar los posibles obstáculos del entorno. Este proyecto se centra en un tipo específico de radar llamado phased array radar. Este tipo de radar se caracteriza por la antena que es un array de antenas, en concreto para este proyecto se trata de un array lineal de ocho dipolos en la banda de frequencia S. El uso de una antena de tipo phased array supone una ventaja importante. Empleando los fundamentos de radiación aplicado a array de antenas se obtiene que la directividad de la antena puede ser modificada. Esto se consigue aplicando distintos desfasajes a la señal de radiofrecuencia que alimenta a cada elemento del array. Para aplicar los desfasajes se emplea un desplazador de fase, este dispositivo aplica una diferencia de fase a su salida con respecto a la señal de entrada dependiendo de una tensión continua de control. Por tanto el empleo de una antena de tipo phased array supone una gran ventaja puesto que no se necesita un sistema de rotación para cambiar la directividad de la antena. El objetivo principal del proyecto consiste en el diseño de la red de alimentación y la red de polarización de la antena de tipo phased array. La red de alimentación consiste en un circuito pasivo que permite alimentar a cada elemento del array con la misma cantidad de señal. Dicha red estará formada por divisores de potencia pasivos y su configuración será en paralelo. Por otro lado la red de polarización consiste en el diseño de un sistema automático que permite cambiar la directividad de la antena. Este sistema consiste en un programa en Matlab que es ejecutado en un ordenador conectado a un micro-controlador mediante una comunicación serie. El funcionamiento se basa en calcular las tensiones continuas de control, que necesitan los desplazadores de fase, mediante un programa en Matlab y enviarlos como datos al micro-controlador. Dicho micro-controlador genera las tensiones de control deseadas y las proporciona a cada desplazador de fase, obteniendo así la directividad deseada. Debido al amplio abanico de posibilidades, se obtienen dos soluciones que son sometidas a pruebas. Se obtienen las ventajas y desventajas de cada una. Finalmente se implementa una interfaz gráfica de usuario con el objetivo de hacer dicho sistema manejable y entendible para cualquier usuario.