Chemical changes in biomass during torrefaction

Torrefaction is moderate thermal treatment (~200-300 °C) of biomass in an inert atmosphere. The torrefied fuel offers advantages to traditional biomass, such as higher heating value, reduced hydrophilic nature, increased its resistance to biological decay, and improved grindability. These factors could, for instance, lead to better handling and storage of biomass and increased use of biomass in pulverized combustors. In this work, we look at several aspects of changes in the biomass during torrefaction. We investigate the fate of carboxylic groups during torrefaction and its dependency to equilibrium moisture content. The changes in the wood components including carbohydrates, lignin, extractable materials and ashforming matters are also studied. And at last, the effect of K on torrefaction is investigated and then modeled. In biomass, carboxylic sites are partially responsible for its hydrophilic characteristic. These sites are degraded to varying extents during torrefaction. In this work, methylene blue sorption and potentiometric titration were applied to measure the concentration of carboxylic groups in torrefied spruce wood. The results from both methods were applicable and the values agreed well. A decrease in the equilibrium moisture content at different humidity was also measured for the torrefied wood samples, which is in good agreement with the decrease in carboxylic group contents. Thus, both methods offer a means of directly measuring the decomposition of carboxylic groups in biomass during torrefaction as a valuable parameter in evaluating the extent of torrefaction. This provides new information to the chemical changes occurring during torrefaction. The effect of torrefaction temperature on the chemistry of birch wood was investigated. The samples were from a pilot plant at Energy research Center of the Netherlands (ECN). And in that way they were representative of industrially produced samples. Sugar analysis was applied to analyze the hemicellulose and cellulose content during torrefaction. The results show a significant degradation of hemicellulose already at 240 °C, while cellulose degradation becomes significant above 270 °C torrefaction. Several methods including Klason lignin method, solid state NMR and Py-GC-MS analyses were applied to measure the changes in lignin during torrefaction. The changes in the ratio of phenyl, guaiacyl and syringyl units show that lignin degrades already at 240 °C to a small extent. To investigate the changes in the extractives from acetone extraction during torrefaction, gravimetric method, HP-SEC and GC-FID followed by GC-MS analysis were performed. The content of acetone-extractable material increases already at 240 °C torrefaction through the degradation of carbohydrate and lignin. The molecular weight of the acetone-extractable material decreases with increasing the torrefaction temperature. The formation of some valuable materials like syringaresinol or vanillin is also observed which is important from biorefinery perspective. To investigate the change in the chemical association of ash-forming elements in birch wood during torrefaction, chemical fractionation was performed on the original and torrefied birch samples. These results give a first understanding of the changes in the association of ashforming elements during torrefaction. The most significant changes can be seen in the distribution of calcium, magnesium and manganese, with some change in water solubility seen in potassium. These changes may in part be due to the destruction of carboxylic groups. In addition to some changes in water and acid solubility of phosphorous, a clear decrease in the concentration of both chlorine and sulfur was observed. This would be a significant additional benefit for the combustion of torrefied biomass. Another objective of this work is studying the impact of organically bound K, Na, Ca and Mn on mass loss of biomass during torrefaction. These elements were of interest because they have been shown to be catalytically active in solid fuels during pyrolysis and/or gasification. The biomasses were first acid washed to remove the ash-forming matters and then organic sites were doped with K, Na, Ca or Mn. The results show that K and Na bound to organic sites can significantly increase the mass loss during torrefaction. It is also seen that Mn bound to organic sites increases the mass loss and Ca addition does not influence the mass loss rate on torrefaction. This increase in mass loss during torrefaction with alkali addition is unlike what has been found in the case of pyrolysis where alkali addition resulted in a reduced mass loss. These results are important for the future operation of torrefaction plants, which will likely be designed to handle various biomasses with significantly different contents of K. The results imply that shorter retention times are possible for high K-containing biomasses. The mass loss of spruce wood with different content of K was modeled using a two-step reaction model based on four kinetic rate constants. The results show that it is possible to model the mass loss of spruce wood doped with different levels of K using the same activation energies but different pre-exponential factors for the rate constants. Three of the pre-exponential factors increased linearly with increasing K content, while one of the preexponential factors decreased with increasing K content. Therefore, a new torrefaction model was formulated using the hemicellulose and cellulose content and K content. The new torrefaction model was validated against the mass loss during the torrefaction of aspen, miscanthus, straw and bark. There is good agreement between the model and the experimental data for the other biomasses, except bark. For bark, the mass loss of acetone extractable material is also needed to be taken into account. The new model can describe the kinetics of mass loss during torrefaction of different types of biomass. This is important for considering fuel flexibility in torrefaction plants.

Germination, initial growth and cotyledon protein content of bean cultivars under salinity stress

Excess salts in the root zone inhibit water uptake by plants, affect nutrient uptake and may result in toxicities due to individual salts in the soil solution. Excess exchangeable sodium in the soil may destroy the soil structure to a point where water penetration and root aeration become impossible. Sodium is also toxic to many plants. Beans (Phaseolus vulgaris L.) are consumed as protein source in northeastern Brazil, although little is known about common bean cultivar tolerance to salinity. The germination of bean cultivars under salt stress was studied. The cultivars 'Carioca' and 'Mulatinho' were submitted to germination test in a germinator at 25ºC, at the Seed Analysis Laboratory of the Brazilian Agricultural Research Corporation unit in the Semi- Arid region (Embrapa Semi Árido), Petrolina, Pernambuco State. These seeds were germinated on "germitest" papers imbibed in distilled water or in 10, 50, 100 e 200 mol.m-3sodium chloride (NaCl) solutions. At the first and second counts of the germination test, normal seedlings were counted, measured, weighed and dried, supplying data for vigor, total germination, fresh matter weight and dry matter weight and seedlings length. Total protein was quantified in cotyledons at 3, 6 and 9 days after sowing. The results indicated that the NaCl content influenced seed germination and concentrations above 50 mol.m-3 decreased germination and seedling growth.

Evaluation of lignin content of soybean seed coat stored in a controlled environment

Breeding soybean for high seed quality is an important approach for developing cultivars for tropical regions, and the lignin content in the seed coat is one of the screening parameters for this trait. Considering that many breeding lines are evaluated in each growing season using the presently recommended method for lignin determination, a long period is required for the evaluation of the whole breeding program. This time limitation may influence lignin content assessment, if lignin is degraded during storage. This research reported was designed to determine whether lignin was degraded in the seed coat of soybean seed cultivars stored for one year in a controlled environment (10°C temperature and 50% air relative humidity). Seeds of 12 selected soybean cultivars that had a range in seed coat lignin content were evaluated. Seeds were hand harvested just after physiological maturity and evaluated for seed coat lignin content at harvest and after one year of storage in a cold room (10°C and 50% RH). The lignin content in seed coats differed significantly among cultivars in both analyses, but for both results the sequence of cultivar classification and the lignin content values of each cultivar did not change. A regression analysis of lignin content at harvest and after one year of storage indicated a direct relationship between both lignin determinations suggesting no differences between the lignin content of each cultivar due to prolonged storage (r² = 0.98***). This indicates that the lignin determination in the soybean seed coat can be performed over a long time period without any bias due to change in its content.

Thermal and moisture content effects on storability and seed dormancy releasing on Brachiaria brizantha cultivars

Brachiaria species normally show a double seed dormancy mechanism, mainly on fresh-harvested seeds, leading to germination percentages lower than those of viability detected by tetrazolium test (TZ) and causing problems as to storage, trading and seed inspection activities. The adoption of the methodology to detect the constants of the viability equation (high storage temperatures and fixed moisture contents) made feasible in this research to isolate the effects of 40, 50 and 65°C on B. brizantha cultivars Marandu, Mulato 1 and Mulato 2 seed dormancy releasing, after storage with moisture contents ranging from 1.9 and 17.8%. Seed samples presented high dormancy levels, detected by TZ and it was complete and partially released by chemical scarification and accelerated ageing test, respectively. No statistical differences were observed as to the speed of germination (T50); however, differences among cultivars were detected as to number of seed per gram. Sorption and desorption isotherm curves were similar for the cultivars. Seed dormancy releasing was better achieved at 40 and 50°C with mc ranging from 7.6 to 10.8%. The temperature of 50°C appears to be adequate for seed dormancy releasing in all mc analyzed. No significant seed dormancy releasing result was observed at 65°C. The cultivar Marandu presented the highest storability throughout the experiment.

Alterations in the lipid and soluble sugar content of melanoxylon brauna seeds during natural and accelerated ageing

The decay of seeds is irreversible and at best can only be delayed by applying techniques that reduce the velocity of the metabolic reactions involved. There is little information on the biochemistry of tropical forest tree seeds related to their storability. It was investigated the influence of the composition of lipids and soluble sugars of two storage compartments, the cotyledons and the embryonic axis, of Melanoxylon brauna Schot. (Leguminosae- Caesalpinioideae), a hardwood known as black brauna, seeds stored at 20 ºC for 0, 3, 6, 9 and 12 months (natural ageing) and for 0, 24, 48, 72 and 96 hours at 40 ºC (accelerated ageing). The levels of fatty acids and monosaccharides varied differentially in each of the embryo storage compartments. Changes in oligosaccharide levels were similar for both types of ageing, diminishing in both compartments. Ageing can be attributed to the significant decrease of oligosaccharides and the increase of glucose in both types of ageing and both embryo compartments.

Effect of storage period on isoflavone content and physiological quality of conventional and transgenic soybean seeds

The objective in this research was to evaluate the isoflavone content and the physiological quality of seed from conventional and transgenic soybean cultivars before and after 180 days of storage. Twenty one soybean cultivars: CD 202, CD 206, CD 208, CD 213RR, CD 214RR, CD 215, CD 216, CD 217, CD 218, CD 221, BRS 184, BRS 185, BRS 214, BRS 244RR, BRS 245RR, BRS 246RR, BRS 255, BRS 257, BRS 258, BRS 261 and BRS 262, grown in the 2005/2006 crop season, were assayed. The seeds were packed in Kraft paper bags and stored at room temperature under laboratory conditions. Seeds were evaluated with respect to their germination and vigor (first germination count, accelerated aging and tetrazolium test) and their total isoflavone contents and respective aglycon forms (daidzein, genistein and glycitein),glycosides (daidzine, genistine and glycitine) and malonyl conjugates. A completely randomized block design with six replications with the treatments set out within a subplot scheme (21 cultivars x 2 storage periods) was used. The F-test was used to compare means between storage periods and the Scott-Knott test to compare cultivars for each storage period, both with a 95% probability. It was concluded that isoflavone contents differ between cultivars and show a distinct behavior throughout storage.

Plantability and moisture content of naked and pelleted seeds of supersweet (Sh2) corn during cold storage conditions

The supersweet (Sh2) corn seeds have a thin tegument and an irregular shape, which hinder the sowing procedure. As a function of those factors, the significance of using the pelleting process to improve sowing and standardize the stand of plants in the field without the need of thinning within the row is emphasized. Although this technique has already been known for many years, little has been studied on the effect of such procedure on the plantability and on the moisture content of the supersweet corn seeds. Therefore, this research work aimed at evaluating the effects of pelleting on the moisture content of the seeds along the storing process, on the occurrence of gaps on seed deposition and on the dropping of double seeds, with the aid of a testing seeder. Other physical attributes of seeds and pellets were also evaluated through tests of fragmentation, screen retention, mass of a thousand seeds and apparent volume. Results have shown an increase on the mass and on the volume of the pelleted seeds that presented highly resistance to cracks and breaking. The pelleting was efficient on the reduction of gaps and on the deposition of double seeds at sowing, thus providing highly satisfactory results for these attributes. An increase on the seed moisture content was also observed as a function of storage with a significant reduction on this factor after the pelleting procedure. Results allow concluding that the pelleting process reduces seed moisture content and improves plantability, positively affecting the efficiency of the sowing process.

Physiological quality, content and activity of antioxidants in soybean seeds artificially aged

The objective of this study was to evaluate physiological quality, content, and activity of antioxidants, in soybean seeds subjected to accelerated aging during different periods. Seeds of cultivars BRS 258, BRS 262 and BRS 268, subjected to accelerated aging during 12, 24, 36 and 48 hours and non-aged seeds were used. After each aging period, the seed were evaluated by tests of: germination; first count and tetrazolium. The total of phenolic compounds, total flavonoides, total of isoflavones, and activity for eliminating ABTS●+ radicals were quantified. There were differences among cultivars according to vigor and viability only after seeds were aged. Cultivars BRS 158 and BRS 268 have shown better seed physiological quality in each aging period; however, not presenting higher amounts of isoflavones and efficiency in removing free radicals. For all cultivars, the values for total of phenolic compounds, as well as total of flavonoids have shown quadratic positive behavior; the values for isoflavones remained constant and the vigor and viability showed contrary trend to activity of antioxidant agents.

Influence of lignin content in soybean seed coat on the incidence of the storage fungus Aspergillus flavus

Seed quality may be affected by several factors, including permeability, color, and lignin content in the seed coat. This study aimed at evaluating influence of lignin content in the tegument of seed samples of six different soybean cultivars, in which half of each sample was inoculated with the fungus Aspergillus flavus, on the physical and physiological quality, and on the seed health, during 180 days storage period, under cold chamber with controlled conditions of temperature and RH. For that, at each interval of 60 days, samples were removed, and the physiological quality of these seeds was assessed by means of moisture and lignin contents; and by tests of seed health, germination, and electrical conductivity. The moisture content of seeds remained constant during all storage period. In the seed health test, it was found that inoculation was efficient, once the minimum incidence of the fungus in the inoculated seeds was 85%. In the germination test, there was a trend of reduction on percentage germination with the increase in storage period. However, there was an increase on electrical conductivity of seeds assessed. It was concluded that there is no interference of the lignin content in the seed coat on the resistance to infection by the fungus Aspergillus flavus, even after seed storage for a period of 180 days.

The Role of Content Marketing in Company Branding

The purpose of this study is to provide a deep understanding of the concept of content marketing in relation to company branding.

CONSUMER PERCEPTIONS ON A CONTENT-BASED DIGITAL SERVICE. The usage and service quality of Masennusinfo.fi

Kuluttajat käyttävät sisältöpohjaisia digitaalisia palveluita jatkuvasti saadakseen lisää tietoa terveydestään. Samalla he arvioivat käyttämiensä palveluiden laatua. Jotta yritykset voisivat suunnitella ja tarjota parhaita mahdollisia digitaalisia palveluita kuluttajille, yritysten tulisi tunnistaa ja analysoida kuluttajien kokemuksia ja käyttötarkoituksia heidän palveluissaan. Tämän tutkimuksen tarkoituksena on kuvailla kuluttajien näkemyksiä Masennusinfo.fi:stä, joka on sisältöpohjainen digitaalinen palvelu, ja joka tarjoaa käyttäjilleen tietoa masennuksesta. Päämääränä on selvittää, kuinka kuluttajat kokevat lääkeyrityksen tarjoaman palvelun laadun ja mihin tarkoituksiin sitä käytetään. Tutkimuksen tarkoitus voidaan jakaa kolmeen osa-ongelmaan: • Mihin tarkoituksiin kuluttajat käyttävät sisältöpohjaisia digitaalisia palveluita? • Miten kuluttajat kokevat näiden palveluiden laadun? • Kuinka käyttötarkoitus ja koettu laatu eroavat eri käyttäjäryhmissä? Tutkimus toteutetaan web-pohjaisella kyselytutkimuksella. Mittarit tehdään teoreettisen viitekehyksen pohjalta, joka perustuu aikaisempaan tutkimukseen. Tutkimuksen empiirinen osuus suoritetaan pop-up tutkimuksella, joka sijoitetaan tutkittavalle sivustolle antaen näin kaikille palvelun käyttäjille mahdollisuuden vastata kyselyyn. Tulokset osoittavat, että palvelua käyttävät suurimmaksi osaksi naiset, suhteellisen nuoret 16−29-vuotiaat, tai yli keski-ikäiset 50−65-vuotiaat henkilöt, jotka ovat joko työssäkäyviä tai opiskelijoita ja korkeasti koulutettuja. Masennusinfo.fi nähdään laadukkaana palveluna kaikissa käyttäjäryhmissä sekä sen käytettävyyden että sisällön perusteella. Käyttötarkoituksetkin ovat jokseenkin samankaltaisia eri käyttäjäryhmissä. Yleensä palvelua käytetään tiedon hakemiseen sairauden alkuvaiheessa. Löydöksien perusteella esitetään, että palvelua muokataan vastaamaan yhä paremmin sen käyttötarkoituksia ja tyypillistä käyttäjäprofiilia. Koska muutamia pieniä eroja käyttäjäryhmien näkemyksissä havaittiin, palveluiden tuottaja päättää, minkä ryhmän mieltymyksiä se noudattaa.

Consumer perceptions on a content-based digital service:the usage and service quality of Masennusinfo.fi

Kuluttajat käyttävät sisältöpohjaisia digitaalisia palveluita jatkuvasti saadakseen lisää tietoa terveydestään. Samalla he arvioivat käyttämiensä palveluiden laatua. Jotta yritykset voisivat suunnitella ja tarjota parhaita mahdollisia digitaalisia palveluita kuluttajille, yritysten tulisi tunnistaa ja analysoida kuluttajien kokemuksia ja käyttötarkoituksia heidän palveluissaan. Tämän tutkimuksen tarkoituksena on kuvailla kuluttajien näkemyksiä Masennusinfo.fi:stä, joka on sisältöpohjainen digitaalinen palvelu, ja joka tarjoaa käyttäjilleen tietoa masennuksesta. Päämääränä on selvittää, kuinka kuluttajat kokevat lääkeyrityksen tarjoaman palvelun laadun ja mihin tarkoituksiin sitä käytetään. Tutkimuksen tarkoitus voidaan jakaa kolmeen osa-ongelmaan: Mihin tarkoituksiin kuluttajat käyttävät sisältöpohjaisia digitaalisia palveluita? Miten kuluttajat kokevat näiden palveluiden laadun? Kuinka käyttötarkoitus ja koettu laatu eroavat eri käyttäjäryhmissä? Tutkimus toteutetaan web-pohjaisella kyselytutkimuksella. Mittarit tehdään teoreettisen viitekehyksen pohjalta, joka perustuu aikaisempaan tutkimukseen. Tutkimuksen empiirinen osuus suoritetaan pop-up tutkimuksella, joka sijoitetaan tutkittavalle sivustolle antaen näin kaikille palvelun käyttäjille mahdollisuuden vastata kyselyyn. Tulokset osoittavat, että palvelua käyttävät suurimmaksi osaksi naiset, suhteellisen nuoret 16−29- vuotiaat, tai yli keski-ikäiset 50−65-vuotiaat henkilöt, jotka ovat joko työssäkäyviä tai opiskelijoita ja korkeasti koulutettuja. Masennusinfo.fi nähdään laadukkaana palveluna kaikissa käyttäjäryhmissä sekä sen käytettävyyden että sisällön perusteella. Käyttötarkoituksetkin ovat jokseenkin samankaltaisia eri käyttäjäryhmissä. Yleensä palvelua käytetään tiedon hakemiseen sairauden alkuvaiheessa. Löydöksien perusteella esitetään, että palvelua muokataan vastaamaan yhä paremmin sen käyttötarkoituksia ja tyypillistä käyttäjäprofiilia. Koska muutamia pieniä eroja käyttäjäryhmien näkemyksissä havaittiin, palveluiden tuottaja päättää, minkä ryhmän mieltymyksiä se noudattaa.

Digital Content Marketing in the Business-to-Business Context. A Case Study on Marketing Communications Agencies.

Marketing has changed because of digitalization. Marketing is moving towards digital channels and more companies are transitioning from “pushing” advertising messages to “pull” marketing, that attracts audience with the content that interests and benefits the audience. This kind of marketing is called content marketing or “inbound” marketing. This study focuses on how marketing communications agencies utilize digital content marketing and what are the best practices with the selected digital content marketing channels. In this study, those channels include blogs, Facebook, Twitter, and LinkedIn. The qualitative research method was utilized in order to examine the phenomenon of digital content marketing in-depth. The chosen data collecting method was semi-structured interviewing. A total of seven marketing communications agencies, who currently utilize digital content marketing, were selected as case companies and interviewed. All the case companies are from the marketing communications industry because that industry can be assumed to be well adapted to digital content marketing techniques. There is a research gap about digital content marketing in the B2B context, which increases the novelty value of this research. The study examines what is digital content marketing, why B2B companies use digital content marketing, and how should digital content marketing be conducted through blogs and social media. The informants perceived digital marketing to be a fundamental part of their all marketing. They conduct digital content marketing for the following reasons: to increase sales, to improve their brand image and to demonstrate their own skills. Concrete results of digital content marketing for the case companies include sales leads, new clients, better brand image, and that recruiting is easier. The most important success factors with blogs and social media are the following: 1) Audience-centric thinking. All content planning should start from figuring out which themes interests the target audience. Social media channel choices should be based on where the target audience can be reached. 2) Companies should not talk only about themselves. Instead, content is made about themes that interests the target audience. On social media channels, only a fragment of all shared content is about the company. Rather, most of the shared content is industry-specific content that helps the potential client.

Content-centered method for search engine optimization

Value of online business has grown to over one trillion USD. This thesis is about search engine optimization, which focus is to increase search engine rankings. Search engine optimization is an important branch of online marketing because the first page of search engine results is generating majority of the search traffic. Current articles about search engine optimization and Google are indicating that with the proper use of quality content, there is potential to improve search engine rankings. However, the existing search engine optimization literature is not noticing content at a sufficient level. To decrease that difference, the content-centered method for search engine optimization is constructed, and content in search engine optimization is studied. This content-centered method consists of three search engine optimization tactics: 1) content, 2) keywords, and 3) links. Two propositions were used for testing these tactics in a real business environment and results are suggesting that the content-centered method is improving search engine rankings. Search engine optimization is constantly changing because Google is adjusting its search algorithm regularly. Still, some long-term trends can be recognized. Google has said that content is growing its importance as a ranking factor in the future. The content-centered method is taking advance of this new trend in search engine optimization to be relevant for years to come.

Content-centered method for search engine optimization

Value of online business has grown to over one trillion USD. This thesis is about search engine optimization, which focus is to increase search engine rankings. Search engine optimization is an important branch of online marketing because the first page of search engine results is generating majority of the search traffic. Current articles about search engine optimization and Google are indicating that with the proper use of quality content, there is potential to improve search engine rankings. However, the existing search engine optimization literature is not noticing content at a sufficient level. To decrease that difference, the content-centered method for search engine optimization is constructed, and content in search engine optimization is studied. This content-centered method consists of three search engine optimization tactics: 1) content, 2) keywords, and 3) links. Two propositions were used for testing these tactics in a real business environment and results are suggesting that the content-centered method is improving search engine rankings. Search engine optimization is constantly changing because Google is adjusting its search algorithm regularly. Still, some long-term trends can be recognized. Google has said that content is growing its importance as a ranking factor in the future. The content-centered method is taking advance of this new trend in search engine optimization to be relevant for years to come.