Experiments on the digestibility of prickly pear by cattle /

"May 28, 1908."

Recherches experimentales sur la dispersion rotatoire ; Etude numerique sur les relations entre le coefficient critique et le volume moleculaire /

Thesis (doctoral)--Universite de Geneve.

Ileal digestibility of amino acids in feed ingredients for broilers.

To more precisely formulate feed and predict animal performance, it is important to base both the recommendations and feed formulations on digestible rather than total amino acid contents. Most published data on the digestibility of amino acids in feed ingredients for poultry are based on excreta digestibility. Ileal digestibility is an alternative and preferred approach to estimate amino acid availability in feed ingredients. Both methodologies are described and assessed. In addition, the differences between apparent and standardised (in which corrections are made for basal endogenous losses) digestible amino acid systems are discussed. The concept of a standardised digestibility system as a mean of overcoming the limitations of apparent digestibility estimates is proposed. In this context, different methodologies for the determination of basal endogenous amino acid losses are discussed. Although each methodology suffers from some limitations and published data on endogenous losses at the ileal level in growing poultry are limited, averaged data from repeated experiments using the 'enzymatically hydrolysed casein' method are considered as the best measure of basal losses. Standardised ileal amino acid digestibility values of 17 feed ingredients commonly used in broiler nutrition are presented including grains (barley, corn, sorghum, triticale, wheat), grain by-products (wheat middlings, rice pollard), plant protein sources (soybean meal, canola meal, corn gluten meal, cottonseed meal, lupins, peas/beans, sunflower meal), and animal by-products (feather meal, fish meal, meat and bone meal). This comprehensive set of the ileal amino acid digestibility of feed ingredients in broiler nutrition may serve as a basis for the establishment of the system in broiler feeding and for further research.

Hydrodynamics and mass transfer coefficient in activated sludge aerated stirred column reactor: Experimental analysis and modeling

The aerated stirred reactor (ASR) has been widely used in biochemical and wastewater treatment processes. The information describing how the activated sludge properties and operation conditions affect the hydrodynamics and mass transfer coefficient is missing in the literature. The aim of this study was to investigate the influence of flow regime, superficial gas velocity (U-G), power consumption unit (P/V-L), sludge loading, and apparent viscosity (pap) of activated sludge fluid on the mixing time (t(m)), gas hold-up (epsilon), and volumetric mass transfer coefficient (kLa) in an activated sludge aerated stirred column reactor (ASCR). The activated sludge fluid performed a non-Newtonian rheological behavior. The sludge loading significantly affected the fluid hydrodynamics and mass transfer. With an increase in the UG and P/V-L, the epsilon and k(L)a increased, and the t(m), decreased. The E, kLa, and tm,were influenced dramatically as the flow regime changed from homogeneous to heterogeneous patterns. The proposed mathematical models predicted the experimental results well under experimental conditions, indicating that the U-G, P/V-L, and mu(ap) had significant impact on the t(m) epsilon, and k(L)a. These models were able to give the tm, F, and kLa values with an error around +/- 8%, and always less than +/- 10%. (c) 2005 Wiley Periodicals, Inc.

The influence of dietary sodium chloride, Arginine : Lysine ratio, and methionine source on apparent ileal digestibility of arginine and lysine in acutely heat-stressed broilers

The present study was carried out to determine the ileal digestibility of Arg and Lys in acutely heatstressed broilers using diets varying in Arg:Lys ratio, NaCl concentration, and Met Source. Male broilers were maintained at 22degreesC from 21 to 33 d of age and then at 32degreesC from 33 to 38 d of age. From 28 to 38 d of age, birds were fed a diet with an Arg:Lys ratio of 1.05 and 3 g of supplemental NaCl/kg of diet with or without L-arg free base to increase the Arg:Lys to 1.35, and with or without 3 g/kg of additional NaCl. Methionine was supplied as equimolar amounts of DL-Met or 2-hydroxy-4-(methylthio)-butanoic acid in a 2 x 2 x 2 design. At 38 d of age, digesta were collected from the terminal ileum, and amino acid analyses were conducted on feed and digesta samples and compared with acid-insoluble ash (dietary celite) to calculate the apparent ileal digestibilities of Lys and Arg. Increasing the NaCl concentration and the presence of HMB significantly decreased the digestibility of both Arg and Lys, whereas increasing the Arg:Lys ratio increased the digestibility of only Arg but did increase BW gain (P = 0.08). An interaction between dietary NaCl and Arg:Lys ratio as well as the 3-way interaction suggested that dietary NaCl could affect the apparent ileal digestibility of Arg and Lys at certain Arg:Lys ratios and the response may be influenced by the Met source.

Apparent ileal digestibility of amino acids in dietary ingredients for broiler chickens

The apparent ileal digestibility coefficients of amino acids in 107 samples representing 22 food ingredients were determined using 6-week-old broiler chickens. The ingredients assayed included five cereals ( barley, maize, sorghum, triticale and wheat), two cereal by-products ( rice polishings and wheat middlings), four oilseed meals ( canola, cottonseed, soyabean and sunflower meals), full-fat canola, maize gluten meal, four grain legumes ( chickpeas, faba beans,field peas and lupins) and five animal protein sources ( blood, feather,fish, meat and meat and bone meals). The mean ileal digestibility coefficients of amino acids in wheat and maize were higher than those in sorghum, triticale and barley. However, variations observed in individual amino acid digestibilities among samples within cereal type were greater than those determined between cereals. Threonine and lysine were the least digestible indispensable amino acids in the five cereals evaluated. The most digestible indispensable amino acid was phenylalanine in wheat and, leucine in maize and sorghum. In the case of the wheat middlings and rice polishings, threonine was the least digestible indispensable amino acid and arginine was the best digested. In the oilseed meals assayed, amino acid digestibility was highest for soya-bean and sunflower meals, intermediate for canola meal and lowest for cottonseed meal. Ileal digestibility coefficients of amino acids in lupins were found to be slightly lower than those in soya-bean meal. The amino acid digestibilities of field peas, faba beans and chickpeas were considerably lower than those of lupins. Digestibility of arginine was the highest and that of threonine was the lowest of the indispensable amino acids in oilseed meals and grain legumes, except in cottonseed meal. Lysine was the least digestible amino acid in cottonseed meal. In the animal protein sources assayed, digestibility coefficients of amino acids in blood meal were high, intermediate in fish meal, and low in meat meal, meat and bone meal and feather meal. Variation in amino acid digestibility coefficients determined for blood meal samples was small. However, wide variations in amino acid digestibilities were observed for other animal protein sources, highlighting significant batch-to-batch differences. In particular, marked variations were determined for meat meal and meat and bone meal samples. Cystine was the least digested amino acid in animal protein meals, with the exception of blood meal in which isoleucine had the lowest digestibility. The limitations of using apparent digestibility values in diet formulations and the concept of the standardized digestibility system to overcome these limitations are discussed.

Development of a non-intrusive heat transfer coefficient gauge and its application to high pressure die casting Effect of the process parameters

A heat transfer coefficient gauge has been built, obeying particular rules in order to ensure the relevance and accuracy of the collected information. The gauge body is made out of the same materials as the die casting die (H13). It is equipped with six thermocouples located at different depths in the body and with a sapphire light pipe. The light pipe is linked to an optic fibre, which is connected to a monochromatic pyrometer. Thermocouples and pyrometer measurements are recorded with a data logger. A high pressure die casting die was instrumented with one such gauge. A set of 150 castings was done and the data recorded. During the casting, some process parameters have been modified such as piston velocity, intensification pressure, delay before switch to the intensification stage, temperature of the alloy, etc.... The data was treated with an inverse method in order to transform temperature measurements into heat flux density and heat transfer coefficient plots. The piston velocity and the initial temperature of the die seem to be the process parameters that have the greatest influence on the heat transfer. (c) 2005 Elsevier B.V. All rights reserved.

Hydrodynamics and mass transfer coefficient in three-phase air-lift reactors containing activated sludge

This study was to investigate the impacts of operating conditions and liquid properties on the hydrodynamics and volumetric mass transfer coefficient in activated sludge air-lift reactors. Experiments were conducted in internal and external air-lift reactors. The activated sludge liquid displayed a non-Newtonian rheological behavior. With an increase in the superficial gas velocity, the liquid circulation velocity, gas holdup and mass transfer coefficient increased, and the gas residence time decreased. The liquid circulation velocity, gas holdup and the mass transfer coefficient decreased as the sludge loading increased. The flow regime in the activated sludge air-lift reactors had significant effect on the liquid circulation velocity and the gas holdup, but appeared to have little impact on the mass transfer coefficient. The experimental results in this study were best described by the empirical models, in which the reactor geometry, superficial gas velocity and/or power consumption unit, and solid and fluid properties were employed. (c) 2006 Elsevier B.V. All rights reserved.

Comparison of apparent ileal amino acid digestibility of feed ingredients measured with broilers, layers, and roosters

The apparent ileal digestibility of amino acids in 7 feed ingredients was determined using broilers, layers, and roosters. The ingredients included 3 cereals (wheat, sorghum, and corn), 3 oilseed meals (canola, cottonseed, and soybean meals), and 1 animal protein meal (meat and bone meal). Dietary protein in the assay diets was supplied solely by the test ingredient. All diets contained 20 g/kg of acid-insoluble ash as an indigestible marker, and each diet was offered ad libitum in mash form to 5 replicate pens of broilers and layers, and 4 replicate pens of roosters. The digestibility coefficients of individual amino acids for wheat, corn, and sorghum were higher (P < 0.05) in broilers than in layers and roosters. The digestibility of most amino acids for corn and sorghum was higher (P < 0.05) in roosters compared with those in layers, whereas the digestibility for wheat in layers and roosters was similar. In general, the digestibility of amino acids in canola meal, cottonseed meal, and meat and bone meal was similar among the 3 classes of chickens. The digestibility of amino acids in soybean meal was higher (P < 0.05) for layers compared with those for broilers and roosters but similar between broilers and roosters. These results suggest that the class of chickens significantly influenced the apparent ileal digestibility of amino acids in some feed ingredients.

Estimation of concentration-dependent diffusion coefficient in drying process from the space-averaged concentration versus time with experimental data

The estimation of a concentration-dependent diffusion coefficient in a drying process is known as an inverse coefficient problem. The solution is sought wherein the space-average concentration is known as function of time (mass loss monitoring). The problem is stated as the minimization of a functional and gradient-based algorithms are used to solve it. Many numerical and experimental examples that demonstrate the effectiveness of the proposed approach are presented. Thin slab drying was carried out in an isothermal drying chamber built in our laboratory. The diffusion coefficients of fructose obtained with the present method are compared with existing literature results.