Cirurgias de Derivação do Ventrículo Pulmonar

Cavopulmonary connections have been extensively used in the palliation of complex forms of congenital heart disease requiring some form of right heart bypass. We examine the mid term outcomes of pulmonary ventricle bypass operations in a single institution and performed by the same surgical team. POPULATION: Between March 1999 and April 2006, 62 patients underwent pulmonary ventricle bypass operations: bidirectional cavopulmonary anastomosis (Glenn procedure), total cavopulmonary connections (Fontan procedure) and one and a half ventricle correction in two cases. Age at operation averaged three years (range: 0.42-25 years) for the Glenn procedure and seven years (range: 3-14 years) for the Fontan procedure. There were 36 male patients (58%) and 26 female patients (42%). The most common indication for surgery was the single ventricle defect, present in 66% of patients. Associated lesions included: transposition of the great arteries in 16 patients (35.6%), bilateral superior vena cava in four patients (8.9%), situs ambigus in five patients (11%), situs inversus in another patient (2.2%), Ebstein disease in one patient (2.2) and coronary fistula in another patient (2.2%). Sub-aortic stenosis was present in one patient (2.2%). Palliative surgery was performed in all, but three patients (5%), before the Fontan procedure. RESULTS: Thirty two patients underwent bidirectional cavopulmonary anastomosis and thirty patients underwent cavopulmonary connections, total or 2nd stage. Mean cardiopulmonary bypass times were 50.6+/-21.9 minutes for the Glenn procedure and 88.5+/-26.3 minutes for the Fontan procedure. There was no intra-operative mortality, but two patients (3.2% (died in the first month after surgery; one due to failure of the Glenn circuit and sepsis and the other due to a low cardiac output syndrome and multi-organ dysfunction. Mean ventilation time was 5.2+/-1.7 hours for the Glenn operation and 6.2+/-3.2 hours for the Fontan operation. The mean length of stay in ICU was 3.4+/-2.8 days for patients undergoing the Glenn operation and 4.6+/-3.1 days for patients undergoing the Fontan operation and the mean length of hospital stay was 10.6+/-5.8 days for the Glenn operation and 19.1+/-12.6 days for the Fontan operation respectively. The mean follow up time was 4+/-2.1 years (minimum 0 years and maximum seven years), most patients being in NYHA class I. Epicardiac pacemakers were implanted in three patients due to arrhythmias. Two re-operations (6.7%) were needed, both in the same patient, after the Fontan procedure, this patient eventually died a few years after surgery. CONCLUSIONS: The immediate and mid term outcomes of pulmonary ventricle bypass operations can have excellent results. From our point of view there has been an improvement, namely in the use of the extracardiac conduit technique in the 2nd stage of the Fontan operation.

The Arterial Switch Operation in Europe for Transposition of the Great Arteries: a Multi-Institutional Study from the European Congenital Heart Surgeons Association

OBJECTIVES: This study analyzes the results of the arterial switch operation for transposition of the great arteries in member institutions of the European Congenital Heart Surgeons Association. METHODS: The records of 613 patients who underwent primary arterial switch operations in each of 19 participating institutions in the period from January 1998 through December 2000 were reviewed retrospectively. RESULTS: A ventricular septal defect was present in 186 (30%) patients. Coronary anatomy was type A in 69% of the patients, and aortic arch pathology was present in 20% of patients with ventricular septal defect. Rashkind septostomy was performed in 75% of the patients, and 69% received prostaglandin. There were 37 hospital deaths (operative mortality, 6%), 13 (3%) for patients with an intact ventricular septum and 24 (13%) for those with a ventricular septal defect (P < .001). In 36% delayed sternal closure was performed, 8% required peritoneal dialysis, and 2% required mechanical circulatory support. Median ventilation time was 58 hours, and intensive care and hospital stay were 6 and 14 days, respectively. Although of various preoperative risk factors the presence of a ventricular septal defect, arch pathology, and coronary anomalies were univariate predictors of operative mortality, only the presence of a ventricular septal defect approached statistical significance (P = .06) on multivariable analysis. Of various operative parameters, aortic crossclamp time and delayed sternal closure were also univariate predictors; however, only the latter was an independent statistically significant predictor of death. CONCLUSIONS: Results of the procedure in European centers are compatible with those in the literature. The presence of a ventricular septal defect is the clinically most important preoperative risk factor for operative death, approaching statistical significance on multivariable analysis.

Ecocardiografia em «Cor Triatriatum Dexter»

"Cor triatriatum dexter" (CTD) is an unusual cyanotic cardiac defect in which the right atrium is subdivided into two distinct chambers due to the persistence of the "sinus venosus" valve. Two patients with CTD ho were evaluated and treatment in 1979 and 1992 are described: the first one, had total anomalous pulmonary venous return to the coronary sinus or "cor triatriatum sinister" as preoperative diagnosis based on M-mode echocardiographic findings. The presence of a membrane inside the right atrium was suspected on cineangiogram. The other one had a preoperative diagnosis of CTD. Anatomic relationships and physiological effects were established by two dimensional and Doppler ultrasonography and confirmed at cardiac catheterization and surgery. High resolution two dimensional echocardiography coupled with Doppler ultrasonography has a definite role in the study of this heart defect.

Establishing the main Guidelines for Cast Steel to Produce Truck Parts

Este trabalho foi realizado na Scania CV AB e teve como principal objectivo estabelecer uma diretriz sobre a possível utilização de aços vazados. Existe uma grande necessidade na realização deste trabalho, de forma a apoiar os engenheiros de projecto no seu processo de selecção dos materiais mais adequados, para produzir componentes mais leves e de elevado desempenho. Esta diretriz apresenta informação relacionada com propriedades mecânicas, processos de fundição, vazabilidade, tipologia de defeitos, tratamentos térmicos, soldabilidade e tratamentos superficiais dos aços vazados. Este trabalho foi limitado, na seleção de materiais para componentes do camião, a aços vazados que poderiam ser aplicados em dois componentes específicos: um componente estrutural da carroçaria sujeito a esforços de fadiga e a um colector de gases de combustão, sujeito a fluência, oxidação, fadiga por corrosão, fadiga-térmica e fadiga-mecânica. Foi realizado um benchmark focado nestes dois componentes de forma a saber que materiais são utilizados de momento por outras empresas concorrentes. Foi realizada ainda uma análise sobre possíveis materiais que possam ser aplicados em cada componente referido. Foi conduzida uma caracterização no estado bruto de fundição de um aço inoxidável vazado usado para produzir um protótipo do colector de gases. Esta caracterização consistiu numa análise microestrutural e medição de macro e microdurezas. Além da caracterização inicial, foram aplicados um conjunto de tratamentos térmicos, de forma a estudar a possibilidade de eliminar os carbonetos presentes inicialmente nas fronteiras de grão. As principais conclusões deste trabalho são que o aço vazado apresenta potencial para ser uma escolha válida em diversas aplicações, devido a um leque alargado de propriedades apresentadas tipicamente por este material. Relativamente a aplicações estruturais, o aço vazado é vantajoso comparativamente ao ferro fundido, quando são requeridos, por exemplo, soldabilidade e elevada resistência, combinada com elevada tenacidade à fractura. Para componentes sujeitos a elevadas temperaturas de serviço, o aço inoxidável vazado é vantajoso quando usado a temperaturas superiores a 750°C, apesar do seu elevado custo. O tratamento térmico composto por um recozimento de solubilização seguido de envelhecimento, elimina quase na totalidade os carbonetos presentes nas fronteiras de grão e verifica-se um aumento de dureza através de uma precipitação de carbonetos finamente dispersos na matriz, que poderão também aumentar a resistência à fluência.

Upper Eyelid Reconstruction With a Horizontal V-Y Myotarsocutaneous Advancement Flap

Upper eyelid tumours, particularly basal cell carcinomas, are relatively frequent. Surgical ablation of these lesions creates defects of variable complexity. Although several options are available for lower eyelid reconstruction, fewer surgical alternatives exist for upper eyelid reconstruction. Large defects of this region are usually reconstructed with two-step procedures. In 1997, Okada et al. described a horizontal V-Y myotarsocutaneous advancement flap for reconstruction of a large upper eyelid defect in a single operative time. However, no further studies were published regarding the use of this particular flap in upper eyelid reconstruction. In addition, this flap is not described in most plastic surgery textbooks. The authors report here their experience of 16 cases of horizontal V-Y myotarsocutaneous advancement flaps used to reconstruct full-thickness defects of the upper eyelid after tumour excision. The tumour histological types were as follows: 12 basal cell carcinomas, 2 cases of squamous cell carcinomas, 1 case of sebaceous cell carcinoma and 1 of malignant melanoma. This technique allowed closure of defects of up to 60% of the eyelid width. None of the flaps suffered necrosis. The mean operative time was 30 min. No additional procedures were necessary as good functional and cosmetic results were achieved in all cases. No recurrences were noted. In this series, the horizontal V-Y myotarsocutaneous advancement flap proved to be a technically simple, reliable and expeditious option for reconstruction of full-thickness upper eyelid defects (as wide as 60% of the eyelid width) in a single operative procedure. In the future this technique may become the preferential option for such defects.

The Turbocharged Becker Flap: a Simple Variation that Allows Coverage of Most of the Dorsum of the Hand

Cover of medium and large defects of the dorsum of the hand remains a substantial surgical challenge that often requires free tissue transfer. We report the case of a 28-year-old male who presented with necrosis of most of the dorsum of his dominant hand after an iatrogenic injury. A large Becker flap was raised to cover the entire defect. However, venous insufficiency was noted intraoperatively. The flap was turbocharged by performing a venous anastomosis between the flap and the recipient site, resulting in complete survival of the flap. The authors conclude that the turbocharged Becker flap can be a good alternative for expeditiously covering large defects of the dorsum of the hand without having to resort to free tissue transfer.

Defeitos do Tubo Neural. Experiência de 10 Anos numa Maternidade Central

OBJECTIVES: 1) To determine trends in prevalence of neural tube defects and the impact of therapeutic abortion. 2) To review perinatal management of spina bifida. DESIGN: All spontaneous and therapeutic abortions, still births and live births affected by neural tube defects registered in Alfredo da Costa Maternity in Lisbon, from 1983 to 1992, were retrospectively analysed. RESULTS: Eighty-two cases with neural tube defects are reported and myelomeningocele and anencephaly++ were the most frequent ones. Total prevalence for all defects was 0.78:1000 births with a small upward trend during the last two years. Birth prevalence was 0.6:1000, with a clear downward trend, due to therapeutic abortion. Prenatal diagnosis improved significantly, from 9% of all defects detected in 1983-87 to 77.5% in 1988-92. Since 1989, all cases of anencephaly were detected before birth. Most cases of spina bifida were vaginally delivered, and elective cesarean section occurred in 4. Early closure of the defect was undertaken in 87.6% of the newborns with open spina bifida. CONCLUSION: While total prevalence of neural tube defects remained stable, with only a small upward trend, prenatal diagnosis and therapeutic abortion resulted in a 56.3% fall in birth prevalence. Optimal management of open spina bifida demands a multidisciplinary team with an individual program for each case.

Intraocular Pressure Correlates with Optic Nerve Sheath Diameter in Patients with Normal Tension Glaucoma

PURPOSE: 1. Identify differences in optic nerve sheath diameter (ONSD) as an indirect measure of intracranial pressure (ICP) in glaucoma patients and a healthy population. 2. Identify variables that may correlate with ONSD in primary open-angle glaucoma (POAG) and normal tension glaucoma (NTG) patients. METHODS: Patients with NTG (n = 46) and POAG (n = 61), and healthy controls (n = 42) underwent B-scan ultrasound measurement of ONSD by an observer masked to the patient diagnosis. Intraocular pressure (IOP) was measured in all groups, with additional central corneal thickness (CCT) and visual field defect measurements in glaucomatous patients. Only one eye per patient was selected. Kruskal-Wallis or Mann-Whitney were used to compare the different variables between the diagnostic groups. Spearman correlations were used to explore relationships among these variables. RESULTS: ONSD was not significantly different between healthy, NTG and POAG patients (6.09 ± 0.78, 6.03 ± 0.69, and 5.71 ± 0.83 respectively; p = 0.08). Visual field damage and CCT were not correlated with ONSD in either of the glaucoma groups (POAG, p = 0.31 and 0.44; NTG, p = 0.48 and 0.90 respectively). However, ONSD did correlate with IOP in NTG patients (r = 0.53, p < 0.001), while it did not in POAG patients and healthy controls (p = 0.86, p = 0.46 respectively). Patient's age did not relate to ONSD in any of the groups (p > 0.25 in all groups). CONCLUSIONS: Indirect measurements of ICP by ultrasound assessment of the ONSD may provide further insights into the retrolaminar pressure component in glaucoma. The correlation of ONSD with IOP solely in NTG patients suggests that the translaminar pressure gradient may be of particular importance in this type of glaucoma.

Abdominoplasty and Thoraco-Epigastric Flaps for Large Anterior Trunk Defects after Dermatofibrosarcoma Protuberans Wide Resection: Two Illustrative Cases

INTRODUCTION: Excision of large dermatofibrosarcoma protuberans in the anterior aspect of the trunk often results in large surgical defects that frequently dictate the need for microsurgical reconstruction. However, this option is not always available. PRESENTATION OF CASE: The authors describe two patients with very large anterior trunk dermatofibrosarcoma protuberans: one in the epigastric region and the other in the hypogastric region. In the patient with the hypogastric tumor, a classical abdominoplasty flap associated with umbilical transposition was used to cover the skin defect after muscle and fascial plication, and placement of a polypropylene mesh. In the patient with the epigastric tumor, a synthetic mesh was also placed, and the skin and subcutaneous defect was reconstructed with a reverse abdominoplasty flap and two thoraco-epigastric flaps. In both cases, complete closure was possible without immediate or late complications. DISCUSSION: The local options described in this paper present several potential advantages compared to microsurgical reconstruction, namely they are easier and faster to perform and teach; they provide a good skin color and texture match; they are not associated with distant donor site morbidity; follow-up is usually less cumbersome; the post-operative hospital stay tends to be shorter; they are less costly; they are less prone to complete failure. CONCLUSION: The authors believe that these two patients clearly show that local flaps, although frequently neglected, continue to be valid options for reconstructing large anterior trunk defects, even in the current era of microsurgery enthusiasm.

Partial Rhombencephalosynapsis.

Clinical history - A 4-year-old boy, born prematurely at 29 weeks (twin pregnancy), with periventricular leukomalacia and epilepsy underwent brain MRI. Neurological examination showed severe developmental retardation with axial hypotonia, spastic tetraparesis and convergent strabismus. Imaging findings - Cranial MRI revealed typical aspects of partial rhombencephalosynapsis with vermian hypoplasia, midline fusion of the cerebellar hemispheres and transversely oriented folia and fissures. There was also mild dilatation and dysmorphism of the ventricular system, the septum pellucidum was absent, the hippocampi were malrotated and had vertical orientation and additional finding of associated periventricular cystic leukomalacia. Discussion - Rhombencephalosynapsis (RS) is a rare congenital defect of the cerebellum classically characterised by vermian agenesis or hypogenesis, fusion of the hemispheres, and closely apposed or fused dentate nuclei. It is now considered to result from an absence of division of the cerebellar hemispheres, following an insult between the 28th and 44th day of gestation (i.e., before the formation of the vermis). Other features have also been described such as fusion of the thalami and cerebral peduncles, malrotated hippocampi, corpus callosum agenesis, hypoplastic chiasm, absence of the septum pellucidum, ventriculomegaly, agenesis of the posterior lobe of the pituitary and cortical malformations. Musculoskeletal, cardiovascular, urinary tract, and respiratory abnormalities have been reported. Typical symptoms consist of swallowing difficulties, delayed motor acquisitions, muscular hypotonia, spastic quadriparesis, cerebellar signs including dysarthria, gait ataxia, abnormal eye movements, and seizures and hydrocephalus. The major MRI signs consist of fused cerebellar hemispheres, with absent or hypoplastic vermis, narrow diamond-shaped fourth ventricle and fused dentate nuclei. In a minority of cases, partial RS has been identified by MRI, demonstrating the presence of the nodulus and the anterior vermis and absence of part of the posterior vermis with only partial fusion of the hemispheres in the inferior part. Other cerebellar malformations involving vermian agenesis or hypoplasia include the Dandy–Walker continuum, Joubert syndrome, tectocerebellar dysraphy or pontocerebellar hypoplasias, and are now easily distinguished from RS by both brain MRI and morphology.

Mosaic Trisomy 18 in a Five-Month-Old Infant - Case Report

Individuals with mosaic trisomy 18, only approximately 5% of all trisomy 18 cases, carry both a trisomy 18 and an euploid cell line. Their clinical findings are highly variable, from the absence of dysmorphic features to the complete trisomy 18 syndrome. A five month old daughter of a 38-year-old mother, with vomiting and feeding problems, was referred to our department. She was undernourished and had axial hypotony and developmental delay, an irregular pattern of hypopigmentation on the right side of the abdomen, and moderate sagittal body asymmetry with left-side muscular hemihypotrophy.Mild craniofacial dysmorphy included dolichocephaly, frontal bossing, prominent occiput, long downslanting palpebral fissures, hypertelorism, and retrognathia. A complex heart defect with atrial and ventricular septal defects, pulmonary artery stenosis, and bicuspid aortic valve was identified. Cytogenetic analysis revealedmosaic trisomy 18with trisomy in 90%of peripheral lymphocytes and 17%of skin fibroblasts.This case adds to our knowledge of the phenotypic spectrum and the natural history of mosaic trisomy 18 by adding a dysmorphic feature and a cardiac abnormality that, to the best of our knowledge, had not been previously described.

Trombofilias e Contracepção

Thrombophilias, whether inherited or acquired, are a topic of increased interest in women’s health. Factors that enhance thrombus formation in the presence of thrombophilia include oral contraception, hormone replacement therapy, pregnancy and the puerperium. The risk of venous thomboembolism with hormonal contraceptive use is greater in women with underlying thrombophilias, and thrombosis usually occurs earlier than in women without defined thrombophilias. The degree of increased risk varies according to the underlying thrombophilic defect, the largest bulk of evidence referring to women with Factor V Leiden or prothrombin gene mutation. However, most instances of thrombosis occur due to a combination of inherited, acquired and environmental factors. Before starting oral contraception it is important to screen patients to identify those at increased risk of thrombosis.

Estudo da qualidade de processos na fabricação de semicondutores

A indústria de semicondutores é um sector em permanente evolução tecnológica. A tendência de miniaturização e de otimização do espaço, a necessidade de produzir circuitos cada vez mais complexos, a tendência para o incremento do número de camadas em cada circuito integrado, são as condições necessárias para que a evolução tecnológica nesta área seja uma constante. Os processos ligados à produção de semicondutores estão também em permanente evolução, dada a pressão efetuada pelas necessidades acima expostas. Os equipamentos necessitam de uma crescente precisão, a qual tem que ser acompanhada de procedimentos rigorosos para que a qualidade atingida tenha sempre o patamar desejado. No entanto, a constante evolução nem sempre permite um adequado levantamento de todas as causas que estão na origem de alguns problemas detetados na fabricação de semicondutores. Este trabalho teve por objetivo efetuar um levantamento dos processos ligados ao fabrico de semicondutores a partir de uma pastilha de silício (wafer) previamente realizada, identificando para cada processo os possíveis defeitos introduzidos pelo mesmo, procurando inventariar as causas possíveis que possam estar na origem desse defeito e realizar procedimentos que permitam criar regras e procedimentos perfeitamente estabelecidos que permitam aprender com os erros e evitar que os mesmos problemas se possam vir a repetir em situações análogas em outros produtos de uma mesma família.

Estudo da resistência e mecanismos de dano em juntas adesivas entre materiais compósitos com defeitos de adesão

A necessidade de utilizar métodos de ligação entre componentes de forma mais rápida, eficaz e com melhores resultados tem causado a crescente utilização das juntas adesivas, em detrimento dos métodos tradicionais de ligação. A utilização das juntas adesivas tem vindo a aumentar em diversas aplicações industriais por estas apresentarem vantagens, das quais se destacam a redução de peso, redução de concentrações de tensões e facilidade de fabrico. No entanto, uma das limitações das juntas adesivas é a dificuldade em prever a resistência da junta após fabrico e durante a sua vida útil devido à presença de defeitos no adesivo. Os defeitos são normalmente gerados pela preparação inadequada das juntas ou degradação do adesivo devido ao ambiente (por exemplo, humidade), reduzindo a qualidade da ligação e influenciando a resistência da junta. Neste trabalho é apresentado um estudo experimental e numérico de juntas de sobreposição simples (JSS) com a inclusão de defeitos centrados na camada de adesivo para comprimentos de sobreposição (LO) diferentes. Os adesivos utilizados foram o Araldite® AV138, apresentado como sendo frágil, e o adesivo Sikaforce® 7752, intitulado como adesivo dúctil. A parte experimental consistiu no ensaio à tração das diferentes JSS permitindo a obtenção das curvas força-deslocamento (P-δ). A análise numérica por modelos de dano coesivo (MDC) foi realizada para analisar as tensões de arrancamento ((σy) e as tensões de corte (τxy) na camada adesiva, para estudar a variável de dano do MDC durante o processo de rotura e para avaliar a capacidade dos MDC na previsão da resistência da junta. Constatou-se um efeito significativo dos defeitos de diferentes dimensões na resistência das juntas, que também depende do tipo de adesivo utilizado e do valor de LO. Os modelos numéricos permitiram a descrição detalhada do comportamento das juntas e previsão de resistência, embora para o adesivo dúctil a utilização de uma lei coesiva triangular tenha provocado alguma discrepância relativamente aos resultados experimentais.

Criação de programa informático em ambiente Matlab® para estudo de estruturas planas pelo Método de Elementos Finitos.

Os modelos a ser analisados pelo Método de Elementos Finitos são cada vez mais complexos e, nos tempos que correm, seria impensável realizar tais análises sem um apoio computorizado. Existe para esta finalidade uma vasta gama de programas que permitem realizar tarefas que passam pelo desenho de estruturas, análise estática de cargas, análise dinâmica e vibrações, visualização do comportamento físico (deformações) em tempo real, que permitem a otimização da estrutura. Sob o pretexto de permitir a qualquer utilizador uma análise de estruturas simples com o Método dos Elementos Finitos, surge esta tese, onde se irá criar de raiz um programa com interface gráfica no ambiente MATLAB® para análise de estruturas simples com dois tipos de elemento finito, triangular de deformação constante e quadrangular de deformação linear. O software desenvolvido, verificado por comparação com um software comercial dedicado para o efeito, efetua malhagem com elementos bidimensionais triangulares e quadriláteros e resolve modelos arbitrados pelo Método de Elementos Finitos, representando estes resultados visualmente e em formato tabular.