Energy-aware task mapping onto heterogeneous platforms using DVFS and sleep states

Heterogeneous multicore platforms are becoming an interesting alternative for embedded computing systems with limited power supply as they can execute specific tasks in an efficient manner. Nonetheless, one of the main challenges of such platforms consists of optimising the energy consumption in the presence of temporal constraints. This paper addresses the problem of task-to-core allocation onto heterogeneous multicore platforms such that the overall energy consumption of the system is minimised. To this end, we propose a two-phase approach that considers both dynamic and leakage energy consumption: (i) the first phase allocates tasks to the cores such that the dynamic energy consumption is reduced; (ii) the second phase refines the allocation performed in the first phase in order to achieve better sleep states by trading off the dynamic energy consumption with the reduction in leakage energy consumption. This hybrid approach considers core frequency set-points, tasks energy consumption and sleep states of the cores to reduce the energy consumption of the system. Major value has been placed on a realistic power model which increases the practical relevance of the proposed approach. Finally, extensive simulations have been carried out to demonstrate the effectiveness of the proposed algorithm. In the best-case, savings up to 18% of energy are reached over the first fit algorithm, which has shown, in previous works, to perform better than other bin-packing heuristics for the target heterogeneous multicore platform.

Algoritmo genético para empacotamento de contentores

No âmbito da investigação operacional o problema de empacotamento de contentores é conhecido por procurar definir uma configuração de carga, de forma a otimizar a utilização de um espaço disponível para efetuar o empacotamento. Este problema pode ser apresentado em diversas formas, formas estas que variam em função das características de cada empacotamento. Estas características podem ser: o tipo de carga que se pretende carregar (homogénea ou heterogénea), a possibilidade de a carga poder sofrer rotações em todas as suas dimensões ou apenas em algumas, o lucro que está associado a cada caixa carregada ou restrições inerentes ao contentor como por exemplo dimensões. O interesse pelo estudo de problemas de empacotamento de contentores tem vindo a receber cada vez mais ênfase por várias razões, uma delas é o interesse financeiro dado que o transporte é uma prática que representa custos, sendo importante diminuir estes custos aproveitando o volume do contentor da melhor forma. Outra preocupação que motiva o estudo deste problema prende-se com fatores ambientes, onde se procura racionalizar os recursos naturais estando esta também ligada a questões financeiras. Na literatura podem ser encontradas varias propostas para solucionar este problema, cada uma destas dirigidas a uma variante do problema, estas propostas podem ser determinísticas ou não determinísticas onde utilizam heurísticas ou metaheurísticas. O estudo realizado nesta dissertação descreve algumas destas propostas, nomeadamente as metaheurísticas que são utilizadas na resolução deste problema. O trabalho aqui apresentado traz também uma nova metaheurísticas, mais precisamente um algoritmo genético que terá como objetivo, apresentar uma configuração de carga para um problema de empacotamento de um contentor. O algoritmo genético tem como objetivo a resolução do seguinte problema: empacotar várias caixas retangulares com diversos tamanhos num contentor. Este problema é conhecido como Bin-Packing. A novidade que este algoritmo genético vai introduzir nas diversas soluções apresentadas até à data, é uma nova forma de criar padrões iniciais, ou seja, é utilizada a heurística HSSI (Heurística de Suavização de Superfícies Irregulares) que tem como objetivo criar uma população inicial de forma a otimizar o algoritmo genético. A heurística HSSI tenta resolver problemas de empacotamento simulando, o comportamento da maioria das pessoas ao fazer este processo na vida real, contudo, tem um campo de busca reduzido entre as soluções possíveis e será então utilizado um algoritmo genético para ampliar este campo de busca e explorar novas soluções. No final pretende-se obter um software onde será possível configurar um dado problema de empacotamento de um contentor e obter, a solução do mesmo através do algoritmo genético. Assim sendo, o estudo realizado tem como principal objetivo contribuir com pesquisas e conclusões, sobre este problema e trazer uma nova proposta de solução para o problema de empacotamento de contentores.

Characterization of sol-gel matrices with entrapped cutinase

Dissertação para obtenção do Grau de Doutor em Engenharia Química e Bioquímica

Drivers of participation in collaborative consumption ventures

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Provide instructions and resources for assessment and training in earth building: the Pirate project

This publication reflects the views only of the authors, and the Commission cannot be held responsible for any use which may be made of the information contained therein.

O Conselho de Estado na monarquia constitucional: uma reflexão preliminar

This article summarises the transformations in the State Council’s functions and membership throughout the Portuguese Constitutional Monarchy, and makes a preliminary attempt to scrutinise the political role played by an institution designed since its inception to advise the monarch. In spite of the parsimony of contemporary sources, and even contradictory empirical evidence, it seems indisputable that in several critical occasions the monarch’s political decisions were influenced by the dominant view in the State Council. Finally, the article presents the collective biography of the 73 individuals appointed to the State Council between 1833 and 1910 – who may be defined as the inner circle of the ruling elite - focusing on basic background features (birthplace, age, education, occupation, noble titles and political experience).

O Poder do Sultão e o Estado Otomano

O estado Otomano representou um dos mais complexos sistemas políticos da história do Islão. O seu sistema burocrático e militar recorria ao recrutamento (devşirme) de não-Muçulmanos composto por crianças provenientes da Romélia para evitar que qualquer membro da sociedade Otomana interviesse na política. Sem raízes estabelecidas na sociedade Otomana a sua lealdade concentrava-se numa instituição: o Sultão. No século dezoito e dezanove o exotismo Otomano cativou muitos dos Europeus, o Sultão foi descrito como o centro da sociedade Otomana com um poder absoluto sobre todos os que a compunham. O poder do Sultão era absolutista, porém, o estado Otomano estava desenhado de uma forma em que a sua estrutura não podia ser alterada, pela sua matiz Islâmica e também para não enfraquecer as bases que mantinham a cúpula de poder. Através da metodologia de process-tracing o nosso estudo analisa a forma como o Sultão obteve e legitimou o seu poder assim como os actores que serviram de contrapeso ao seu poder. No século dezanove, particularmente, nenhum Sultão possuía um poder absoluto, a dificuldade que enfrentavam por parte da sociedade Otomana para realizar reformas mostra que não podiam agir só pela sua vontade. O nosso estudo tem como objectivo criticar Karl Marx e Max Weber, consideramos que simplificam o sistema de governação Otomano. Esperamos expor como se organizava este império como estrutura política e qual o poder do Sultão, considerando o “Círculo de Equidade” como o principal modelo para o seu poder.

Acute renal failure due to abdominal compartment syndrome: report on four cases and literature review

We report on 4 cases of abdominal compartment syndrome complicated by acute renal failure that were promptly reversed by different abdominal decompression methods. Case 1: A 57-year-old obese woman in the post-operative period after giant incisional hernia correction with an intra-abdominal pressure of 24 mm Hg. She was sedated and curarized, and the intra-abdominal pressure fell to 15 mm Hg. Case 2: A 73-year-old woman with acute inflammatory abdomen was undergoing exploratory laparotomy when a hypertensive pneumoperitoneum was noticed. During the surgery, enhancement of urinary output was observed. Case 3: An 18-year-old man who underwent hepatectomy and developed coagulopathy and hepatic bleeding that required abdominal packing, developed oliguria with a transvesical intra-abdominal pressure of 22 mm Hg. During reoperation, the compresses were removed with a prompt improvement in urinary flow. Case 4: A 46-year-old man with hepatic cirrhosis was admitted after incisional hernia repair with intra-abdominal pressure of 16 mm Hg. After paracentesis, the intra-abdominal pressure fell to 11 mm Hg.

Assessing the application of polypropylene multifilament yarns in brain phantoms

The currently available clinical imaging methods do not provide highly detailed information about location and severity of axonal injury or the expected recovery time of patients with traumatic brain injury [1]. High-Definition Fiber Tractography (HDFT) is a novel imaging modality that allows visualizing and quantifying, directly, the degree of axons damage, predicting functional deficits due to traumatic axonal injury and loss of cortical projections. This imaging modality is based on diffusion technology [2]. The inexistence of a phantom able to mimic properly the human brain hinders the possibility of testing, calibrating and validating these medical imaging techniques. Most research done in this area fails in key points, such as the size limit reproduced of the brain fibers and the quick and easy reproducibility of phantoms [3]. For that reason, it is necessary to develop similar structures matching the micron scale of axon tubes. Flexible textiles can play an important role since they allow producing controlled packing densities and crossing structures that match closely the human crossing patterns of the brain. To build a brain phantom, several parameters must be taken into account in what concerns to the materials selection, like hydrophobicity, density and fiber diameter, since these factors influence directly the values of fractional anisotropy. Fiber cross-section shape is other important parameter. Earlier studies showed that synthetic fibrous materials are a good choice for building a brain phantom [4]. The present work is integrated in a broader project that aims to develop a brain phantom made by fibrous materials to validate and calibrate HDFT. Due to the similarity between thousands of hollow multifilaments in a fibrous arrangement, like a yarn, and the axons, low twist polypropylene multifilament yarns were selected for this development. In this sense, extruded hollow filaments were analysed in scanning electron microscope to characterize their main dimensions and shape. In order to approximate the dimensional scale to human axons, five types of polypropylene yarns with different linear density (denier) were used, aiming to understand the effect of linear density on the filament inner and outer areas. Moreover, in order to achieve the required dimensions, the polypropylene filaments cross-section was diminished in a drawing stage of a filament extrusion line. Subsequently, tensile tests were performed to characterize the mechanical behaviour of hollow filaments and to evaluate the differences between stretched and non-stretched filaments. In general, an increase of the linear density causes the increase in the size of the filament cross section. With the increase of structure orientation of filaments, induced by stretching, breaking tenacity increases and elongation at break decreases. The production of hollow fibers, with the required characteristics, is one of the key steps to create a brain phantom that properly mimics the human brain that may be used for the validation and calibration of HDFT, an imaging approach that is expected to contribute significantly to the areas of brain related research.

Synthesis of iminosugars through diastereo/enantioselective diels-alder cycloaddition

Tese de Doutoramento em Ciências (Especialidade em Química)

Enzymatic treatments to improve mechanical properties and surface hydrophobicity of jute fiber membranes

Fiber membranes prepared from jute fragments can be valuable, low cost, and renewable. They have broad application prospects in packing bags, geotextiles, filters, and composite reinforcements. Traditionally, chemical adhesives have been used to improve the properties of jute fiber membranes. A series of new laccase, laccase/mediator systems, and multi-enzyme synergisms were attempted. After the laccase treatment of jute fragments, the mechanical properties and surface hydrophobicity of the produced fiber membranes increased because of the cross-coupling of lignins with ether bonds mediated by laccase. The optimum conditions were a buffer pH of 4.5 and an incubation temperature of 60 °C with 0.92 U/mL laccase for 3 h. Laccase/guaiacol and laccase/alkali lignin treatments resulted in remarkable increases in the mechanical properties; in contrast, the laccase/2,2-azino-bis-(3-ethylthiazoline-6-sulfonate) (ABTS) and laccase/2,6-dimethoxyphenol treatments led to a decrease. The laccase/ guaiacol system was favorable to the surface hydrophobicity of jute fiber membranes. However, the laccase/alkali lignin system had the opposite effect. Xylanase/laccase and cellulase/laccase combined treatments were able to enhance both the mechanical properties and the surface hydrophobicity of jute fiber membranes. Among these, cellulase/laccase treatment performed better; compared to mechanical properties, the surface hydrophobicity of the jute fiber membranes showed only a slight increase after the enzymatic multi-step processes.

Dano reflexo nos acidentes de viação

Relatório de atividade profissional de mestrado em Direito dos Contratos e da Empresa

Mulheres (in)visíveis: que "género" de comentadores no horário nobre da televisão?

Dissertação de mestrado em Ciências da Comunicação (área de especialização em Informação e Jornalismo)

A aprendizagem de tópicos da circunferência com recurso ao GeoGebra: uma experiência com alunos do 9.º ano de escolaridade

Relatório de estágio de mestrado em Ensino de Matemática no 3.º ciclo do Ensino Básico e no Ensino Secundário

Flow and transport in electrochromatography

Analyte retention, analyte transport, axial dispersion, adsorption, charge-selectivity, concentration polarization, confocal laser scanning microscopy, donnan-exclusion, electrical double layer; electrochromatography; electrohydrodynamics, electrokinetic instability, electroosmosis; electroosmotic flow; electroosmotic mobility, electroosmotic perfusion, electrophoresis, hierarchical porous media, hydrodynamic flow, induced-charge electroosmosis, ion-permselectivity, ion-permselective transport, monolith, nonequilibrium electrical double layer, nonequilibrium electrokinetic effects, nonlinear electroosmosis, plate height, plate number, porous media, pore-scale dispersion, refractive index matching, space charge effects, sphere packing, quantitative imaging, wall effect, zeta-potential