3,3,6,6-Tetramethyl-9-phenyl-3,4,5,6-tetrahydro-9H-xanthene-1,8(2H,7H)-dione

In the title compound, C23H26O3, the three six-membered rings of the xanthene system are non-planar, having total puckering amplitudes, QT, of 0.443 (2), 0.202 (2) and 0.449 (2) Å. The central ring adopts a boat conformation and the outer rings adopt sofa conformations. The crystal structure is stabilized by van der Waals interactions.

A new method for the in vivo identification of mechanical properties in arteries from cine MRI images: Theoretical framework and validation

Quantifying the stiffness properties of soft tissues is essential for the diagnosis of many cardiovascular diseases such as atherosclerosis. In these pathologies it is widely agreed that the arterial wall stiffness is an indicator of vulnerability. The present paper focuses on the carotid artery and proposes a new inversion methodology for deriving the stiffness properties of the wall from cine-MRI (magnetic resonance imaging) data. We address this problem by setting-up a cost function defined as the distance between the modeled pixel signals and the measured ones. Minimizing this cost function yields the unknown stiffness properties of both the arterial wall and the surrounding tissues. The sensitivity of the identified properties to various sources of uncertainty is studied. Validation of the method is performed on a rubber phantom. The elastic modulus identified using the developed methodology lies within a mean error of 9.6%. It is then applied to two young healthy subjects as a proof of practical feasibility, with identified values of 625 kPa and 587 kPa for one of the carotid of each subject.

Energy-momentum conserving algorithm for nonlinear transient analysis within the framework of hybrid elements

This work deals with the formulation and implementation of an energy-momentum conserving algorithm for conducting the nonlinear transient analysis of structures, within the framework of stress-based hybrid elements. Hybrid elements, which are based on a two-field variational formulation, are much less susceptible to locking than conventional displacement-based elements within the static framework. We show that this advantage carries over to the transient case, so that not only are the solutions obtained more accurate, but they are obtained in fewer iterations. We demonstrate the efficacy of the algorithm on a wide range of problems such as ones involving dynamic buckling, complicated three-dimensional motions, et cetera.

Studies in terpenoids. Part 42. Synthesis of 3-(2-hydroxyisopropyl)5,8-dimethyl-1,2-naphthoquinone (emmotin-H)

Emmotin-H, a naturally occurring sesquiterpenoid 1,2-naphthoquinone pigment (1) has been synthesised in a four step sequence starting from the known 5,8-dimethyl-4-oxotetralin-2-carboxylic acid (3a). Selenium dioxide oxidation of its methyl ester (3b) gives 3-methoxycarbonyl-5,8-dimethyl-1,2-naphthoquinone (4) which on reductive acetylation affords the corresponding diacetoxynaphthalene ester (5). Its reaction with excess of methylmagnesium iodide is accompanied by aerial oxidation during work-up and furnishes emmotin-H (1).

SU-8-Based Microchips for Capillary Electrophoresis and Electrospray Ionization Mass Spectrometry

Miniaturization of analytical instrumentation is attracting growing interest in response to the explosive demand for rapid, yet sensitive analytical methods and low-cost, highly automated instruments for pharmaceutical and bioanalyses and environmental monitoring. Microfabrication technology in particular, has enabled fabrication of low-cost microdevices with a high degree of integrated functions, such as sample preparation, chemical reaction, separation, and detection, on a single microchip. These miniaturized total chemical analysis systems (microTAS or lab-on-a-chip) can also be arrayed for parallel analyses in order to accelerate the sample throughput. Other motivations include reduced sample consumption and waste production as well as increased speed of analysis. One of the most promising hyphenated techniques in analytical chemistry is the combination of a microfluidic separation chip and mass spectrometer (MS). In this work, the emerging polymer microfabrication techniques, ultraviolet lithography in particular, were exploited to develop a capillary electrophoresis (CE) separation chip which incorporates a monolithically integrated electrospray ionization (ESI) emitter for efficient coupling with MS. An epoxy photoresist SU-8 was adopted as structural material and characterized with respect to its physicochemical properties relevant to chip-based CE and ESI/MS, namely surface charge, surface interactions, heat transfer, and solvent compatibility. As a result, SU-8 was found to be a favorable material to substitute for the more commonly used glass and silicon in microfluidic applications. In addition, an infrared (IR) thermography was introduced as direct, non-intrusive method to examine the heat transfer and thermal gradients during microchip-CE. The IR data was validated through numerical modeling. The analytical performance of SU-8-based microchips was established for qualitative and quantitative CE-ESI/MS analysis of small drug compounds, peptides, and proteins. The CE separation efficiency was found to be similar to that of commercial glass microchips and conventional CE systems. Typical analysis times were only 30-90 s per sample indicating feasibility for high-throughput analysis. Moreover, a mass detection limit at the low-attomole level, as low as 10E+5 molecules, was achieved utilizing MS detection. The SU-8 microchips developed in this work could also be mass produced at low cost and with nearly identical performance from chip to chip. Until this work, the attempts to combine CE separation with ESI in a chip-based system, amenable to batch fabrication and capable of high, reproducible analytical performance, have not been successful. Thus, the CE-ESI chip developed in this work is a substantial step toward lab-on-a-chip technology.

A New Criterion for the Metallicity of Elements

A vast majority of elements are metallic in the liquid state. The latent heat of vapourization, ΔHv, of such elements is greater than the critical value of not, vert, similar 42 kJ mol−1 (0.44 eV mol−) which demarcates metals from non-metals. It is shown that ΔHv can be related to the Fermi energy as well as to the Herzfeld criterion involving atomic polarizability.

Topology-Guided Tessellation Of Quadratic Elements

Topology-based methods have been successfully used for the analysis and visualization of piecewise-linear functions defined on triangle meshes. This paper describes a mechanism for extending these methods to piecewise-quadratic functions defined on triangulations of surfaces. Each triangular patch is tessellated into monotone regions, so that existing algorithms for computing topological representations of piecewise-linear functions may be applied directly to the piecewise-quadratic function. In particular, the tessellation is used for computing the Reeb graph, a topological data structure that provides a succinct representation of level sets of the function.

Konstrukcija mnimosti : K poètike "Voskovoj persony" Ju. Tynjanova

The subject of this work is the poetics of «The Wax Effigy», a short novel or novella by Jurii Tynianov, Russian writer, literary critic, historian of literature and prominent literary theoretician. The plot structure of the novel is based upon a real event, the creation by Bartolomeo Carlo Rastrelli in 1725 of a wax sculpture of the first Russian emperor, Peter the Great. «Construction of the Sham» consists of three chapters, an introduction and a conclusion. Due to the fact that Tynianov was at the same time a prose writer and theoretician of literature it seemed important to consider the reception of his prose and his works on literary theory in relationship to each other. The introduction is devoted to this task. The first chapter is about the history of the creation of the novel and its reception. Tynianov stopped writing one short story in order to write the novel; these two works have some common traits. It seems almost obvious that his work on the first text was a real step toward the creation of the second. In the first story there is an opposition of dead/alive which is semantic prefiguring of a central motif in «The Wax Effigy». An analysis of the reception of the novel demonstrated that almost every critic writing about the novel has described it as nonsense. Critics considered Tynianov's work in terms of «devices» and «content» and could not understand how devices are related to the content of the novel: the novel was thought as a signifier without any signified. Implicitly, critics thought the signified of the novel as a traditional one of the historical novel, as the historiosophical «idea», embodied in the system of literary devices. In this case literature becomes something instrumental, a kind of expression of extraliterary content. In contradistinction to that Tynianov considered literary semantics as an effect of the literary structure. From his point of view the literary sense is immanent to the process of signification accomplished inside the literary text. The second chapter is devoted to a rhetorical analysis of the opposition dead/alive. Tynianov systematically compares both terms of the opposition. As a result of this strategy the wax effigy of the dead emperor becomes «as if» alive and the world of living people «as if» dead. The qualifier «as if» refers to the fact that Tynianov creates an ambiguous semantic system. This rhetoric is related to European Romanticism and his «fantastic literature» (Merimé, Hoffmann, Maupassant etc.). But Tynianov demonstrates a linguistic origin of the strange fantoms created by romantics; he demystifies these idols by parodying the fantastic literature, that is, showing «how it was done». At the same time, the opposition mentioned above refers to his idea of «incongruity» which plays a prominent role in Tynianov s theory but has never been conceptualised. The incongruity is a inner collision of the literary text; from Tynianov's point of view the meaning of the work of literature is always a dynamic collision of semantically heterogeneous elements struggling with each other. In «The Wax Effigy» Tynianov creates a metalevel of the work demonstrating the process of creation of the literary sense. The third chapter is a reconstruction of Tynianov's conception of the historical prose, specifically of the mechanisms by which historical facts are transformed into literary events. Tynianov thought that the task of the historical novelist is to depict his hero as an actor, to demonstrate that as a wearer of many masks he is a creator of appearances, ambiguities. Here, in the «figure of fiction» (Andrei Belyi), the very idea of the historical prose and rhetoric employed in «The Wax Effigy», history and literature meet each other. In his last theoretical work, «On parody» Tynianov writes about the so-called sham structure of parody. In his opinion every parody is a text about other texts and «serious» work which could be read at the same time as a text about «reality». This twofold structure of parody is that of «The Wax Effigy»: that text speaks about ambiguities of the history and about ambiguities of the literary sense, about social reality of the past and - about the working of the literature itself. «The Wax Effigy» is written as a autoreflective text, as an experiment in literary semantics, as a system of literary ambiguities - of hero, rhetoric and the text itself. The meaning of the novel is created not by the embodiment extraliterary idea, but by the process of signification accomplished inside the work of literature. In this sense Tynianov's novel is parody, a break with the tradition of the historical novel preceding «The Wax Effigy».

Analysis of laminated shells with laminated stiffeners using rectangular shell finite elements

A finite element analysis of laminated shells reinforced with laminated stiffeners is described in this paper. A rectangular laminated anisotropic shallow thin shell finite element of 48 d.o.f. is used in conjunction with a laminated anisotropic curved beam and shell stiffening finite element having 16 d.o.f. Compatibility between the shell and the stiffener is maintained all along their junction line. Some problems of symmetrically stiff ened isotropic plates and shells have been solved to evaluate the performance of the present method. Behaviour of an eccentrically stiffened laminated cantilever cylindrical shell has been predicted to show the ability of the present program. General shells amenable to rectangular meshes can also be solved in a similar manner.

Preliminary phonological analysis of the Limi dialect of Humla Bhotia

The purpose of this research was to analyse the phonological system of the Limi dialect of Humla Bhotia. Humla Bhotia is a Tibeto-Burman language that is spoken by approximately 4000 5000 people in the far northwestern Humla province of the Kingdom of Nepal. The language has not previously been the subject of analysis. The data base for this thesis was collected on two different dialects of Humla Bhotia in Kathmandu, the capital of Nepal, from February to May 2000. I had three language informants who speak Humla Bhotia as their mother tongue. One of the informants speaks the Upper Humla dialect and the other two informants speak the Limi dialect. In this thesis I have concentrated on the phonology of the dialect of Limi but occasionally I also make reference to the Upper Humla dialect. The Limi data base consists of 600 words elicited in isolation, sentences where words have been checked for consonantal and pitch variation, and five texts comprising 117 sentences. Firstly, I have studied the geographical location, population and dialects of Humla Bhotia. Five dialects were identified: Limi, Upper Humla, La Yakba, Nyinba and Humli Khyampa. Information on the dialect areas is based on the accounts of seven mother tongue speakers of the language and on Nancy Levine s (1988) anthropological research of the ethnic group Nyinba. Secondly, I have analysed the phonological system of Limi from the viewpoint of American stucturalism much along the lines followed by Pike 1966 [1947] ja 1967 [1948]. In defining the prosodic elements I have also used acoustic analysis. In the Limi dialect there are 7 vowel phonemes. No vowel clusters occur within the same syllable. In this preliminary analysis 29 contrastive plosives, 8 affricates and 5 6 fricatives were found. The data also revealed 4 nasal phonemes, two rhotic phonemes, one lateral phoneme and two central approximants. Further research is however called for to check the phonemic status of these segments. Four contrastive prosodic elements were encountered: nasalisation, length, phonation type and pitch movement. There are two contrastive types of phonation: tense and lax. Many words were found with a third type of phonation, modal phonation. How modal phonation relates to the prosodic system is unclear at this stage and is therefore left for further research to determine. There are two contrastive pitch movement tonemes: a rising toneme and falling toneme. The falling toneme occurs in free variation with a level pitch contour. Rising appears to be linked with lax phonation and falling with tense phonation.

4,6,8,10,16-Penta- and 4,6,8,10,16,18-hexamethyldocosanes from the cane beetle Antitrogus parvulus - Cuticular hydrocarbons with unprecedented structure and stereochemistry

The major cuticular hydrocarbons from the cane beetle species Antitrogus parvulus were deduced to be 4,6,8,10,16,18-hexa- and 4,6,8,10,16- pentamethyldocosanes 2 and 3, respectively. Isomers of 2,4,6,8-tetramethylundecanal 27, 36, and 37, derived from 2,4,6-trimethylphenol, were coupled with the phosphoranes 28 and 29 to furnish alkenes and, by reduction, diastereomers of 2 and 3. Chromatographic and spectroscopic comparisons confirmed 2 as either 6a or 6b and 3 as either 34a or 34b.

A high yield synthesis of (±)-5,8-dimethoxy-2-α-hydroxyethyl-3,4-dihydronaphthalene, a key intermediate in anthracyclinone synthesis

The dimethoxytetralol gives on Vilsmeier reaction the dihydronaphthaldehyde (yield,92%), which on Grignard reaction with MeMgI affords the title compound (yield,�100%), the reactions constituting a high yield synthesis of this important anthracyclinone intermediate.

Sustaining productivity of a Vertosol at Warra, Queensland, with fertilisers, no-tillage or legumes. 8. Effect of duration of lucerne ley on soil nitrogen and water, wheat yield and protein.

Soil nitrogen (N) supply in the Vertosols of southern Queensland, Australia has steadily declined as a result of long-term cereal cropping without N fertiliser application or rotations with legumes. Nitrogen-fixing legumes such as lucerne may enhance soil N supply and therefore could be used in lucerne-wheat rotations. However, lucerne leys in this subtropical environment can create a soil moisture deficit, which may persist for a number of seasons. Therefore, we evaluated the effect of varying the duration of a lucerne ley (for up to 4 years) on soil N increase, N supply to wheat, soil water changes, wheat yields and wheat protein on a fertility-depleted Vertosol in a field experiment between 1989 and 1996 at Warra (26degrees 47'S, 150degrees53'E), southern Queensland. The experiment consisted of a wheat-wheat rotation, and 8 treatments of lucerne leys starting in 1989 (phase 1) or 1990 (phase 2) for 1,2,3 or 4 years duration, followed by wheat cropping. Lucerne DM yield and N yield increased with increasing duration of lucerne leys. Soil N increased over time following 2 years of lucerne but there was no further significant increase after 3 or 4 years of lucerne ley. Soil nitrate concentrations increased significantly with all lucerne leys and moved progressively downward in the soil profile from 1992 to 1995. Soil water, especially at 0.9-1.2 m depth, remained significantly lower for the next 3 years after the termination of the 4 year lucerne ley than under continuous wheat. No significant increase in wheat yields was observed from 1992 to 1995, irrespective of the lucerne ley. However, wheat grain protein concentrations were significantly higher under lucerne-wheat than under wheat wheat rotations for 3-5 years. The lucerne yield and soil water and nitrate-N concentrations were satisfactorily simulated with the APSIM model. Although significant N accretion occurred in the soil following lucerne leys, in drier seasons, recharge of the drier soil profile following long duration lucerne occurred after 3 years. Consequently, 3- and 4-year lucerne-wheat rotations resulted in more variable wheat yields than wheat-wheat rotations in this region. The remaining challenge in using lucerne-wheat rotations is balancing the N accretion benefits with plant-available water deficits, which are most likely to occur in the highly variable rainfall conditions of this region.