Influence of structural features on Portuguese toddler child care quality

Whereas child care quality has been extensively studied in the U.S., there is much less information about the quality of child care in other countries.With one of the highest maternal employment rates in Europe, it is important to examine child care in Portugal. Thirty toddler classrooms in child care centers were observed. The purpose of this studywas to determine whether structural features account for overall toddler child care quality. Results showed younger and better-paid teachers provided better toddler child care quality. Space available per childwas not a statistically significant predictor of toddler child care quality.Overall quality results suggest some issues to be addressed by early education policy makers and indicate the need to promote quality in Portuguese toddler child care programs.

Functional and structural characterization of the RNase II-family of enzymes

Dissertation presented to obtain a Doctoral Degree in Biology by Instituto de Tecnologia Química e Biológica, Universidade Nova de Lisboa

Prognostic Value of a New Cardiopulmonary Exercise Testing Parameter in Chronic Heart Failure: Oxygen Uptake Efficiency at Peak Exercise - Comparison with Oxygen Uptake Efficiency Slope

INTRODUCTION: A growing body of evidence shows the prognostic value of oxygen uptake efficiency slope (OUES), a cardiopulmonary exercise test (CPET) parameter derived from the logarithmic relationship between O(2) consumption (VO(2)) and minute ventilation (VE) in patients with chronic heart failure (CHF). OBJECTIVE: To evaluate the prognostic value of a new CPET parameter - peak oxygen uptake efficiency (POUE) - and to compare it with OUES in patients with CHF. METHODS: We prospectively studied 206 consecutive patients with stable CHF due to dilated cardiomyopathy - 153 male, aged 53.3±13.0 years, 35.4% of ischemic etiology, left ventricular ejection fraction 27.7±8.0%, 81.1% in sinus rhythm, 97.1% receiving ACE-Is or ARBs, 78.2% beta-blockers and 60.2% spironolactone - who performed a first maximal symptom-limited treadmill CPET, using the modified Bruce protocol. In 33% of patients an cardioverter-defibrillator (ICD) or cardiac resynchronization therapy device (CRT-D) was implanted during follow-up. Peak VO(2), percentage of predicted peak VO(2), VE/VCO(2) slope, OUES and POUE were analyzed. OUES was calculated using the formula VO(2) (l/min) = OUES (log(10)VE) + b. POUE was calculated as pVO(2) (l/min) / log(10)peakVE (l/min). Correlation coefficients between the studied parameters were obtained. The prognosis of each variable adjusted for age was evaluated through Cox proportional hazard models and R2 percent (R2%) and V index (V6) were used as measures of the predictive accuracy of events of each of these variables. Receiver operating characteristic (ROC) curves from logistic regression models were used to determine the cut-offs for OUES and POUE. RESULTS: pVO(2): 20.5±5.9; percentage of predicted peak VO(2): 68.6±18.2; VE/VCO(2) slope: 30.6±8.3; OUES: 1.85±0.61; POUE: 0.88±0.27. During a mean follow-up of 33.1±14.8 months, 45 (21.8%) patients died, 10 (4.9%) underwent urgent heart transplantation and in three patients (1.5%) a left ventricular assist device was implanted. All variables proved to be independent predictors of this combined event; however, VE/VCO2 slope was most strongly associated with events (HR 11.14). In this population, POUE was associated with a higher risk of events than OUES (HR 9.61 vs. 7.01), and was also a better predictor of events (R2: 28.91 vs. 22.37). CONCLUSION: POUE was more strongly associated with death, urgent heart transplantation and implantation of a left ventricular assist device and proved to be a better predictor of events than OUES. These results suggest that this new parameter can increase the prognostic value of CPET in patients with CHF.

The effect of adhesive thickness on the mechanical behavior of a structural polyurethane adhesive

One parameter that influences the adhesively bonded joints performance is the adhesive layer thickness. Hence, its effect has to be investigated experimentally and should be taken into consideration in the design of adhesive joints. Most of the results from literature are for typical structural epoxy adhesives which are generally formulated to perform in thin sections. However, polyurethane adhesives are designed to perform in thicker sections and might have a different behavior as a function of adhesive thickness. In this study, the effect of adhesive thickness on the mechanical behavior of a structural polyurethane adhesive was investigated. The mode I fracture toughness of the adhesive was measured using double-cantilever beam (DCB) tests with various thicknesses of the adhesive layer ranging from 0.2 to 2 mm. In addition, single lap joints (SLJs) were fabricated and tested to assess the influence of adhesive thickness on the lap-shear strength of the adhesive. An increasing fracture toughness with increasing adhesive thickness was found. The lap-shear strength decreases as the adhesive layer gets thicker, but in contrast to joints with brittle adhesives the decrease trend was less pronounced.

Structural adhesives modified with thermally expandable particles

In this study, the behaviour of two structural adhesives modified with thermally expandable particles (TEPs) was investigated as a preliminary study for further investigations on the potential of TEPs in adhesive joints. Tensile bulk tests were performed to get the tensile properties of the adhesives and TEPs-modified adhesives. In order to determine the expansion temperature of the particles while encapsulated in these particular adhesive systems, the variation of the volume of adhesive samples modified with different TEPs concentration as a function of temperature was measured. Further, the possibility of any chemical interactions between TEPs and adhesives matrix in the TEPs-modified specimens was verified by a Fourier transform infrared spectroscopy analysis. Finally, the fracture surfaces of the unmodified and TEPs-modified specimens, as well as the dispersion and the morphology of the particles, were examined by a scanning electron microscopy analysis. It was found that the stiffness of the TEPs-modified adhesives is not affected by incorporation of TEPs in the adhesives matrix, while the tensile yield strength decreased by increasing the wt% TEPs content. In applications of such particular materials (TEPs-modified adhesives), the temperature should be controlled to stay between 90°C and 120°C in order to obtain the highest expansion ratio. At a lower temperature, not all the particles will expand, and above, the TEPs will deteriorate and as a result the TEPs-modified adhesives will deteriorate.

Strength improvement of adhesively-bonded scarf repairs in aluminium structures with external reinforcements

Adhesively bonded techniques are an attractive option to repair aluminium structures, compared to more traditional methods. Actually, as a result of the improvement in the mechanical characteristics of adhesives, adhesive bonding has progressively replaced the traditional joining methods. There are several bonded repair configurations, as single-strap, double-strap and scarf. Compared with strap repairs, scarf repairs have the advantages of a higher efficiency and the absence of aerodynamic disturbance. The higher efficiency is caused by the elimination of the significant joint eccentricities of strap repairs. Moreover, stress distributions along the bond length are more uniform, due to tapering of the scarf edges. The main disadvantages of this technique are the difficult machining of the surfaces, associated costs and requirement of specialised labour. This work reports on an experimental and numerical study of the tensile behaviour of two-dimensional (2D) scarf repairs of aluminium structures bonded with the ductile epoxy adhesive Araldite® 2015. The numerical analysis, by Finite Elements (FE), was performed in Abaqus® and used cohesive zone models (CZM) for the simulation of damage onset and growth in the adhesive layer, thus enabling the strength prediction of the repairs. A parametric study was performed on the scarf angle (α) and different configurations of external reinforcement (applied on one or two sides of the repair, and also different reinforcement lengths). The obtained results allowed the establishment of design guidelines for repairing, showing that the use of external reinforcements enables increasing α for equal strength recovery, which makes the repair procedure easier. The numerical technique was accurate in predicting the repairs’ strength, enabling its use for design and optimisation purposes.

Biosynthesis-Assisted Structural Elucidation of the Bartolosides, Chlorinated Aromatic Glycolipids from Cyanobacteria

The isolation of the bartolosides, unprecedented cyanobacterial glycolipids featuring aliphatic chains with chlorine substituents and C-glycosyl moieties, is reported. Their chlorinated dialkylresorcinol (DAR) core presented a major structural-elucidation challenge. To overcome this, we discovered the bartoloside (brt) biosynthetic gene cluster and linked it to the natural products through in vitro characterization of the DAR-forming ketosynthase and aromatase. Bioinformatic analysis also revealed a novel potential halogenase. Knowledge of the bartoloside biosynthesis constrained the DAR core structure by defining key pathway intermediates, ultimately allowing us to determine the full structures of the bartolosides. This work illustrates the power of genomics to enable the use of biosynthetic information for structure elucidation.

Structural change: a brief review

This is a short summary of some aspects of structural change models, and is not intended to be comprehensive survey or review. Many important works have been left out. Also, the presentation was not intended to be rigorous nor general. It’s main purpose is only to focus on some recent developments in this area and motivate the reader to learn more.

High diagnostic efficiency of IgM-ELISA with the use of multiple antigen peptides (MAP1) from T. gondii ESA (SAG-1, GRA-1 and GRA-7), in acute toxoplasmosis

The main serological marker for the diagnosis of recent toxoplasmosis is the specific IgM antibody, along with IgG antibodies of low avidity. However, in some patients these antibodies may persist long after the acute/recent phase, contributing to misdiagnosis in suspected cases of toxoplasmosis. In the present study, the diagnostic efficiency of ELISA was evaluated, with the use of peptides derived from T. gondii ESA antigens, named SAG-1, GRA-1 and GRA-7. In the assay referred to, we studied each of these peptides individually, as well as in four different combinations, as Multiple Antigen Peptides (MAP), aiming to establish a reliable profile for the acute/recent toxoplasmosis with only one patient serum sample. The diagnostic performance of the assay using MAP1, with the combination of SAG-1, GRA-1 and GRA-7 peptides, demonstrated better discrimination of the acute/recent phase from non acute/recent phase of toxoplasmosis. Our results show that IgM antibodies to MAP1 may be useful as a serological marker, enhancing the diagnostic efficiency of the assay for acute/recent phase of toxoplasmosis.

Efficiency of strengthening techniques assessed for existing masonry buildings

The Azores archipelago is a zone with a vast cultural heritage, presenting a building stock mainly constructed in traditional stone masonry. It is known that this type of construction exhibits poor behaviour under seismic excitations; however it is extensively used in seismic prone areas, such as this case. The 9th of July of 1998 earthquake was the last seismic event in the islands, leaving many traditional stone constructions severely damaged or totally destroyed. This scenario led to an effort by the local government of improving the seismic resistance of these constructions, with the application of several reinforcement techniques. This work aims to study some of the most used reinforcement schemes after the 1998 earthquake, and to assess their effectiveness in the mitigation of the construction’s seismic vulnerability. A brief evaluation of the cost versus benefit of these retrofitting techniques is also made, seeking to identify those that are most suitable for each building typology. Thus, it was sought to analyze the case of real structures with different geometrical and physical characteristics, by establishing a comparison between the seismic performance of reinforced and non-reinforced structures. The first section contains the analysis of a total of six reinforcement scenarios for each building chosen. Using the recorded 1998 earthquake accelerograms, a linear time-history analysis was performed for each reinforcement scenario. A comparison was then established between the maximum displacements, inter-storey drift and maximum stress obtained, in order to evaluate the global seismic response of each reinforced structure. In the second part of the work, the examination of the performance obtained in the previous section, in relation to the cost of implementing each reinforcement technique, allowed to draw conclusions concerning the viability of implementing each reinforcement method, based on the book value of the buildings in study.

O capital intelectual e a performance das empresas do PSI 20

Num contexto de crescente complexidade e disponibilidade de informação, a gestão do capital intelectual assume cada vez mais preponderância como vantagem competitiva para as empresas que procuram maximizar o valor gerado. Esta investigação usa como metodologia príncipal o VAIC (coeficiente intelectual do valor adicionado), para assim estudar a existência de relação entre capital intelectual e a performance bolsista e financeira das empresas do PSI20. O VAIC é decomposto nos seus três indicadores de eficiência, tais como: capital humano, capital estrutural e capital físico. Os dados contemplam quinze empresas e nove anos de análise (2003 - 2011). Elaborou-se uma abordagem que recorre à utilização de técnicas econométricas para reduzir potênciais falhas no tratamento de dados em painel. Os resultados da análise demonstram uma relação positiva entre a aposta em capital intelectual a performance bolsista e financeira, ou seja, a utilização e gestão eficientes do capital intelectual contribuem de forma significativa na avaliação bolsista e financeira das empresas do PSI20.

Auditoria operacional nos hospitais

Dada a sua estrutura organizacional complexa e a natureza delicada do serviço prestado, os hospitais carecem de uma gestão eficaz e eficiente que os transforme em organizações de excelência. Fatores externos derivados das atuais imposições governamentais, como a necessidade de reorganização dos serviços no sentido de contenção de custos, a obtenção de resultados económicos positivos e, a incessante necessidade dos utentes em obter um atendimento de qualidade, são fatores que não simplificam o problema. As melhorias da qualidade dos serviços de saúde têm sido difíceis de implementar em Portugal, não só porque estas exigem uma mudança fundamental na forma de pensar e de agir que conduzam à alteração de comportamentos, hábitos e de práticas estabelecidas, mas também, porque estes processos requerem tempo, resiliência e uma participação ativa do Estado, e demais entidades reguladoras. A exigência neste processo torna-se fundamental ao nível da segurança, flexibilidade e da atuação sobre fatores estruturais e comportamentais, dado que os conceitos de economia, eficiência e eficácia são transversais a todos os procedimentos, desde o ato de atendimento, à qualidade dos serviços prestados por todos os profissionais e à performance global dos atores envolvidos. No entanto, apesar da importância de que se reveste um processo de mudança, o conhecimento de facto, por si só, não é suficiente para desencadear e manter esta transformação, ainda não existe uma clara e concreta a correlação entre análise e ação. Entende-se por isso, a necessidade do desenvolvimento do benchmarking hospitalar, integrado na filosofia do Balanced Scorecard, complementado com a opinião dos utentes e dos profissionais destes serviços de saúde, comparando o setor público com o privado. Após efetuada a análise aos dados recolhidos, recorrendo à utilização das metodologias previamente identificadas, concluimos que, a generalidade das hipóteses formuladas se verificaram, tendo, por isso, alcançado os objetivos a que nos propusemos nesta investigação.

In situ measured cross section geometry of old timber structures and its influence on structural safety

Old timber structures may show significant variation in the cross section geometry along the same element, as a result of both construction methods and deterioration. As consequence, the definition of the geometric parameters in situ may be both time consuming and costly. This work presents the results of inspections carried out in different timber structures. Based on the obtained results, different simplified geometric models are proposed in order to efficiently model the geometry variations found. Probabilistic modelling techniques are also used to define safety parameters of existing timber structures, when subjected to dead and live loads, namely self-weight and wind actions. The parameters of the models have been defined as probabilistic variables, and safety of a selected case study was assessed using the Monte Carlo simulation technique. Assuming a target reliability index, a model was defined for both the residual cross section and the time dependent deterioration evolution. As a consequence, it was possible to compute probabilities of failure and reliability indices, as well as, time evolution deterioration curves for this structure. The results obtained provide a proposal for definition of the cross section geometric parameters of existing timber structures with different levels of decay, using a simplified probabilistic geometry model and considering a remaining capacity factor for the decayed areas. This model can be used for assessing the safety of the structure at present and for predicting future performance.

Definição Preliminar das Afluências Indevidas ao Subsistema de Gaia Litoral

O problema das afluências indevidas exerce um impacto considerável, não apenas sobre os sistemas de drenagem de águas residuais, mas também sobre o meio ambiente e as populações e infraestruturas presentes nas áreas de influência. Trata-se de um problema com consequências de dimensões técnica/estrutural, ambiental, social, económico-financeira e de saúde pública. Assim, a minimização das afluências indevidas deve constituir uma preocupação da gestão dos sistemas, visto que a mesma permite que a capacidade de transporte e tratamento instalada seja utilizada para as funções inicialmente planeadas (drenagem e tratamento das águas residuais domésticas) e inclui os benefícios de diminuir os custos associados, melhorar a eficiência dos serviços prestados e rentabilizar as infraestruturas existentes. Do ponto de vista económico, há a possibilidade de intervenção nos casos em que o custo de transporte e/ou tratamento do caudal associado às afluências indevidas é superior ao custo da sua eliminação. Neste sentido, um dos objetivos a atingir pela entidade gestora deverá ser o da redução gradual de afluências indevidas, numa perspetiva de custo-benefício. Neste contexto, o objetivo do presente trabalho - a definição preliminar das afluências indevidas ao Subsistema de Gaia Litoral (incluindo a estimativa dos custos associados) - assume uma importância elevada no controlo e redução dos caudais em excesso, visto que a mesma é parte integrante do plano de minimização de afluências indevidas. No decorrer do trabalho, foram implementados os métodos mais adequados ao tipo e natureza da informação utilizada, de forma a cumprir os objetivos estabelecidos inicialmente. Os resultados obtidos permitiram formular uma definição das afluências indevidas assente em volumes em excesso e seus custos, parâmetros de avaliação e indicadores de desempenho.

Gestão de Afluências Indevidas em Redes de Águas Residuais Urbanas

As afluências indevidas resultantes direta ou indiretamente da precipitação são um dos principais fatores que provocam graves problemas de carácter ambiental, estrutural e económico, no âmbito de um bom funcionamento dos sistemas separativos de saneamento e tratamento de águas residuais urbanas. Ao longo dos anos, com a expansão do serviço de saneamento à população, tem sido reconhecido que os caudais excedentes às redes de drenagem de águas residuais e estações de tratamento são um problema grave e para isso estão a ser criados critérios cada vez mais exigentes no domínio da gestão e operação destes sistemas de saneamento. Para uma melhor compreensão sobre a incidência das afluências indevidas nos sistemas de saneamento e nas estações de tratamento de águas residuais, é necessário realizar estudos de quantificação e caracterização no sistema de esgotos. Com a necessidade de compreender a plenitude e natureza deste problema, tornou-se necessário desenvolver metodologias com o objetivo de melhorar a eficiência e eficácia hidráulica dos sistemas de drenagem e de tratamento. Este trabalho tem como objetivo a análise quantitativa das afluências indevidas, recorrendo a um caso de estudo de uma bacia de drenagem de águas residuais. Para adquirir mais conhecimento sobre o tema foi necessário recolher várias metodologias existentes de maneira a selecionar, estudar e aplicar o método mais vantajoso. Nesta dissertação, foram utilizados dados disponibilizados pela SIMRIA, no que respeita aos caudais de bombagem da estação elevatória a que afluiu a rede em estudo, e pela INDAQUA Feira, no que respeita aos dados de precipitação.