Developing the Product Return Process of a Service Center With Lean Methods

Today lean-philosophy has gathered a lot of popularity and interest in many industries. This customer-oriented philosophy helps to understand customer’s value creation which can be used to improve efficiency. A comprehensive study of lean and lean-methods in service industry were created in this research. In theoretical part lean-philosophy is studied in different levels which will help to understand its diversity. To support lean, this research also presents basic concepts of process management. Lastly theoretical part presents a development model to support process development in systematical way. The empirical part of the study was performed by performing experimental measurements during the service center’s product return process and by analyzing this data. Measurements were used to map out factors that have a negative influence on the process flow. Several development propositions were discussed to remove these factors. Problems mainly occur due to challenges in controlling customers and due to the lack of responsibility and continuous improvement on operational level. Development propositions concern such factors as change in service center’s physical environment, standardization of work tasks and training. These factors will remove waste in the product return process and support the idea of continuous improvement.

The contributions of netnography in new product development

Netnography has been studying in various aspects (e.g. definitions of netnography, application of netngoraphy, conducting procedure…) within different industrial contexts. Besides, there are many studies and researches about new product development in various perspectives, such as new product development models, management of new product development project, or interaction between customers and new product design, and so on. However, the connection and the interaction between netnography and new product development have not been studied recently. This opens opportunities for the writer to study and explore unrevealed issues regarding to applying netnography in new product development. In term of the relation between netnography and new product development, there are numerous of matters need to be explored; for instance, the process of applying netnography in order to benefit to new product development, the involvement degree of netnography in new product development process, or eliminating useless information from netnography so that only crucial data is utilized, and so on. In this thesis, writer focuses on exploring how netnography is applied in new product development process, and what benefits netnography can contribute to the succeed of the project. The aims of this study are to understand how netnography is conducted for new product development purpose, and to analyse the contributions of netnography in the new product development process. To do so, a case-study strategy will be conducted with triple case studies. The case studies are chosen bases on many different criteria in order to select the most relevant cases. Eventually, the writer selected three case studies, which are Sunless tanning product project (HYVE), Listerine (NetBase), and Nivea co-creation and netnography in black and white deodorant. The case study strategy applied in this thesis includes four steps e.g. case selection, data collection, case study analysis, and generating the research outcomes from the analysis. This study of the contributions of netnography in the new product development process may be useful for the readers in many ways. It offers the fundamental knowledge of netnography market research method and basic understanding of new product development process. Additionally, it emphasizes the differences between netnography and other market research methods in order to explain the reasons why many companies and market research agents recently utilized netnography in their market research projects. Furthermore, it highlights the contributions of netnography in the new product development process in order to indicate the importance of netnography in developing new product. Thus, the potential readers of the study can be students, marketers, researchers, product developers, or business managers.

PDM system functions and utilizations analysis to improve efficiency of sheet metal product design and manufacturing

This study will concentrate on Product Data Management (PDM) systems, and sheet metal design features and classification. In this thesis, PDM is seen as an individual system which handles all product-related data and information. The meaning of relevant data is to take the manufacturing process further with fewer errors. The features of sheet metals are giving more information and value to the designed models. The possibility of implementing PDM and sheet metal features recognition are the core of this study. Their integration should make the design process faster and manufacturing-friendly products easier to design. The triangulation method is the basis for this research. The sections of this triangle are: scientific literature review, interview using the Delphi method and the author’s experience and observations. The main key findings of this study are: (1) the area of focus in triangle (the triangle of three different point of views: business, information exchange and technical) depends on the person’s background and their role in the company, (2) the classification in the PDM system (and also in the CAD system) should be done using the materials, tools and machines that are in use in the company and (3) the design process has to be more effective because of the increase of industrial production, sheet metal blank production and the designer’s time spent on actual design and (4) because Design For Manufacture (DFM) integration can be done with CAD-programs, DFM integration with the PDM system should also be possible.

How can we agree on some product agnostic repository function fundamentals?

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Software product line for power converters

Työn tilaajana toimi Visedo Oy. Työn tavoitteina oli tutkia Visedo Oy:n ohjelmistokehityksen nykytila, tunnistaa seuraavat parannuskohteet ja antaa ohjeita havaittujen parannuskohteiden korjaamiseksi. Visedo Oy:n tehonmuokkain ohjelmistokehityksen nykytilaa käsiteltiin neljän valitun osa-alueen näkökulmasta: ohjelmistoarkkitehtuurityyli, komponenttipohjainen ohjelmistokehitys, ohjelmistotuotelinjojen kehitysmenetelmät ja ohjelmistovariaatioiden hallinta. Valituilla osa-alueilla havaittujen parannuskohteiden perusteella annettiin korjausehdotuksia: ohjelmistoarkkitehtuurin rakenteeseen, komponenttien jakautumiselle, komponenttien koostamiselle ja komponenttien versioinnille. Lisäksi ehdotettiin uudenlaista ohjelmistotuotelinja rakennetta, joka yhdistää kerros- ja komponenttipohjaiset arkkitehtuurityylit mahdollistaen ominaisuuksiltaan eroavien tehonmuokkain ohjelmistojen hallinnan.

Taxonomy and distribution of the green algal genus Halimeda (Bryopsidales, Chlorophyta) in Brazil

Halimeda is a genus of calcified coenocytic green algae with a well known ecological importance in some tropical areas. Bleached calcified segments of Halimeda may accumulate in large deposits of economic potential as is the case in the northeastern coast of Brazil. In a survey of the genus in Brazil based on recent collections and examination of abundant material deposited on Brazilian herbaria we identified seven species: Halimeda cuneata Hering, H. discoidea Decaisne, H. gracilis Harvey ex J. Agardh, H. incrassata (Ellis) Lamouroux, H. opuntia (Linnaeus) Lamouroux, H. simulans Howe and H. tuna (Ellis & Solander) Lamouroux. These species are described in detail, with emphasis on diagnostic characters. Our study has shown that the shape and size of the utricula in surface view, under scanning electron microscopy, can be utilized to discriminate some species. Fertile specimens of Halimeda cuneata and H. discoidea are reported for the first time in the region. Data on vertical and geographical distribution are presented for each species and the southern limit of the genus in the western Atlantic was extended.

Service paradox in a product oriented company: A service business development case

The master´s thesis had three aims; to develop a service portfolio, to support the management of services through the developed portfolio, and evaluate effects of service differentiation strategy on the future selection of services. The product oriented case company in service paradox is Hilti (Suomi) Oy, which is entering systematic service management era, supported by the late strategic change. Low return on service business investments is referred as service paradox. The project was carried out as a case study, where the primary information source was twenty-one conducted interviews. The theory part focuses on marketing logics, service strategies, and categorization of services. The empirical part contributes in solving the aim related research questions. As a result of the case study a service portfolio was created, next further steps in service management were suggested, and the effect on selection of services by service differentiation strategy was evaluated. The main goal of creating service portfolio contributes to systematic management of services, which required revising at the case company.

Purification of bovine pancreatic glucagon as a by-product of insulin production

A process for purifying bovine pancreatic glucagon as a by-product of insulin production is described. The glucagon-containing supernatant from the alkaline crystallization of insulin was precipitated using ammonium sulfate and isoelectric precipitation. The isoelectric precipitate containing glucagon was then purified by ion-exchange chromatography on Q-Sepharose FF, gel filtration on Sephadex G-25 and ion-exchange chromatography on S-Sepharose FF. A pilot scale test was performed with a recovery of 87.6% and a purification factor of 8.78 for the first chromatographic step, a recovery of 75.1% and a purification factor of 3.90 for the second, and a recovery of 76.2% and a purification factor of 2.36 for the last one. The overall yield was 50%, a purification factor of 80.8 was obtained and the fraction containing active glucagon (suitable for pharmaceutical preparations) was 84% pure as analyzed by HPLC

Post-exercise changes in blood pressure, heart rate and rate pressure product at different exercise intensities in normotensive humans

To evaluate the effect of exercise intensity on post-exercise cardiovascular responses, 12 young normotensive subjects performed in a randomized order three cycle ergometer exercise bouts of 45 min at 30, 50 and 80% of VO2peak, and 12 subjects rested for 45 min in a non-exercise control trial. Blood pressure (BP) and heart rate (HR) were measured for 20 min prior to exercise (baseline) and at intervals of 5 to 30 (R5-30), 35 to 60 (R35-60) and 65 to 90 (R65-90) min after exercise. Systolic, mean, and diastolic BP after exercise were significantly lower than baseline, and there was no difference between the three exercise intensities. After exercise at 30% of VO2peak, HR was significantly decreased at R35-60 and R65-90. In contrast, after exercise at 50 and 80% of VO2peak, HR was significantly increased at R5-30 and R35-60, respectively. Exercise at 30% of VO2peak significantly decreased rate pressure (RP) product (RP = HR x systolic BP) during the entire recovery period (baseline = 7930 ± 314 vs R5-30 = 7150 ± 326, R35-60 = 6794 ± 349, and R65-90 = 6628 ± 311, P<0.05), while exercise at 50% of VO2peak caused no change, and exercise at 80% of VO2peak produced a significant increase at R5-30 (7468 ± 267 vs 9818 ± 366, P<0.05) and no change at R35-60 or R65-90. Cardiovascular responses were not altered during the control trial. In conclusion, varying exercise intensity from 30 to 80% of VO2peak in young normotensive humans did not influence the magnitude of post-exercise hypotension. However, in contrast to exercise at 50 and 80% of VO2peak, exercise at 30% of VO2peak decreased post-exercise HR and RP.

The requirements and needs of global data usage in product lifecycle management

This study was done for ABB Ltd. Motors and Generators business unit in Helsinki. In this study, global data movement in large businesses is examined from a product data management (PDM) and enterprise resource planning (ERP) point-of-view. The purpose of this study was to understand and map out how a large global business handles its data in a multiple site structure and how it can be applied in practice. This was done by doing an empirical interview study on five different global businesses with design locations in multiple countries. Their master data management (MDM) solutions were inspected and analyzed to understand which solution would best benefit a large global architecture with many design locations. One working solution is a transactional hub which negates the effects of multisite transfers and reduces lead times. Also, the requirements and limitations of the current MDM architecture were analyzed and possible reform ideas given.  

Amplification of 9q34 in childhood adrenocortical tumors: a specific feature unrelated to ethnic origin or living conditions

Adrenocortical tumors (ACT) in children under 15 years of age exhibit some clinical and biological features distinct from ACT in adults. Cell proliferation, hypertrophy and cell death in adrenal cortex during the last months of gestation and the immediate postnatal period seem to be critical for the origin of ACT in children. Studies with large numbers of patients with childhood ACT have indicated a median age at diagnosis of about 4 years. In our institution, the median age was 3 years and 5 months, while the median age for first signs and symptoms was 2 years and 5 months (N = 72). Using the comparative genomic hybridization technique, we have reported a high frequency of 9q34 amplification in adenomas and carcinomas. This finding has been confirmed more recently by investigators in England. The lower socioeconomic status, the distinctive ethnic groups and all the regional differences in Southern Brazil in relation to patients in England indicate that these differences are not important to determine 9q34 amplification. Candidate amplified genes mapped to this locus are currently being investigated and Southern blot results obtained so far have discarded amplification of the abl oncogene. Amplification of 9q34 has not been found to be related to tumor size, staging, or malignant histopathological features, nor does it seem to be responsible for the higher incidence of ACT observed in Southern Brazil, but could be related to an ACT from embryonic origin.

Suorituskykymittariston rakentaminen ja kehittämisen haasteet öljyliiketoiminta-alan logistisessa organisaatiossa

Yrityksen oman toiminnan ja tehokkuuden analysointi mittaamalla sen suoritus-kykyä on yritysjohdolle oiva keino saada parempi tietoisuus resurssikäytöstä ja strategian toteutumisesta. Aiemmat tutkimukset ovat osoittaneet, että perinteinen taloudellisen tiedon seuranta ei itsessään riitä liiketoiminnan kattavassa seuran-nassa. Tutkimuksen tavoitteena oli rakentaa suorituskykymittaristo öljyliiketoiminta-alan logistiseen organisaatioon siten, että mittaristo täyttää organisaation mittaamisen päämäärät mahdollisimman tehokkaasti. Suorituskykymittariston osa-alueet ra-kennettiin kohdeorganisaation kriittisten menestystekijöiden perusteella luotujen näkökulmien avulla. Kohdeorganisaation erityspiirteenä oli toiminta osana toimi-tusketjua, johon kuuluivat öljytuotteiden varastointi ja hallittu logistinen operointi perustuen alan standardeihin. Rakennettu suorituskykymittaristo keskittyi turvalli-suus-, kustannustehokkuus- ja tuotehallintatekijöihin tähtäimenä organisaation strategiset tavoitteet. Tutkimus jakaantui teoria- ja empiriaosuuteen. Teoriaosassa tarkasteltiin suoritus-kyvyn mittaamisen merkitystä, suorituskykymittariston rakentamista ja suoritus-kyvyn mittaamisen keskeisiä haasteita. Empiriaosuudessa kerrottiin kohdeorgani-saation erityispiirteet ja kuvattiin suorituskykymittariston kehittäminen kohdeor-ganisaatiossa. Käytetyn tapaustutkimusmenetelmän avulla nostettiin esiin suori-tuskyvyn mittaamisen haasteita ratkaisuineen. Kohdeorganisaation suorituskyvyn mittaamisesta kerätty tieto päädyttiin koosta-maan kerran kuukaudessa päivitettävälle tuloskortille organisaation controllerin toimesta. Tuloskortin rakentamis- ja kehitystyö toteutettiin kahden vuoden aikana. Sen tärkeimmät mittarit pohjautuivat turvallisuuden, kustannustehokkuuden ja käyttöomaisuuden kriittisiin menestystekijöihin, jotka heijastuivat organisaation strategiasta. Tuloskortista saatiin toimiva työkalu johdon käyttöön. Tutkimuksen jatkokehityskohteiksi jäivät tuloskortin kevyempi kuukausipäivitys ja ennustemit-tareiden kehittäminen strategian seurannan tueksi.

Customer-driven service product development

This thesis studies customer-driven service product development and how to manage customer involvement in the service product development process. The theory part of this thesis is a literature review of the prior studies and the thesis also includes empirical evidence in the form of a case study about ABB.

Taxonomy and Species Richness of Amazonian Pimplinae and Rhyssinae (hymenoptera: ichneumonidae)

The Amazonian region, the biggest rain forest of our planet, is known for its extraordinary biodiversity. Most of this diversity is still unexplored and new species of different taxa are regularly found there. In this region, as in most areas of the world, insects are some of the most abundant organisms. Therefore, studying this group is important to promote the conservation of these highly biodiverse ecosystems of the planet. Among insects, parasitoid wasps are especially interesting because they have potential for use as biodiversity indicators and biological control agents in agriculture and forestry. The parasitoid wasp family Ichneumonidae is one of the most species rich groups among the kingdom Animalia. This group is still poorly known in many areas of the world; the Amazonian region is a clear example of this situation. Ichneumonids have been thought to be species poor in Amazonia and other tropical areas. However, recent studies are suggesting that parasitoid wasps may be quite abundant in Amazonia and possibly in most tropical areas of the world. The aim of my doctoral thesis is to study the species richness and taxonomy of two of the best known ichneumonid subfamilies in the Neotropical region, Pimplinae and Rhyssinae. To do this I conducted two extensive sampling programs in the Peruvian Amazonia. I examined also a large number of Neotropical ichneumonids deposited to different natural history museums. According to the results of my thesis, the species richness of these parasitoids in the Amazonian region is considerably higher than previously reported. In my research, I firstly further develop the taxonomy of these parasitoids by describing many new species and reporting several new faunistic records (I, II, III). In this first part I focus on two genera (Xanthopimpla and Epirhyssa) which were thought to be rather species poor. My thesis demonstrates that these groups are actually rather species rich in the Amazonian region. Secondly, I concentrate on the species richness of these parasitoids in a global comparison showing that the Neotropical region and especially the Peruvian Amazonia is one of the most species rich areas of Pimpliformes ichneumonids (V). Furthermore, I demonstrate that with the data available to date no clear latitudinal gradient in species richness is visible. Thirdly, increasing the macroecological knowledge of these parasitoids I show that some previously unreported ichneumonid subfamilies are present in the Amazonian region (IV). These new insights and the results of the global comparison of ichneumonid inventories suggest that the previous belief of low diversity in the tropics is most likely related to a lack of sampling effort in the region. Overall, my research increases the knowledge of Neotropical ichneumonids highlighting the importance of Peruvian Amazonia as one of the diversity hotspots of parasitoid wasps.