Identification of novel factors during the establishment of the Casparian strip in the endodermis

Multicellular organisms rely on specialized tissues that allow for the controlled exchange of matter with their surrounding. In order to function properly, these tissues need to establish a tight connection between the individual cells to prevent uncontrolled passive diffusion across the extracellular space. In animals, these connections are called tight and adherens junctions and are a critical feature of epithelia. These connections, however, rely on direct protein-protein interaction of plasma membrane proteins of adjacent cells. Such a mechanism is not possible in plants due to the cell wall, which encases the individual cells. In order to absorb nutrients, while simultaneously preventing uncontrolled diffusion between cells, land plants have evolved the root endodermis, which is functionally equivalent to animal epithelia. Its cells are surrounded by a precisely localized and aligned, ring-like lignin deposition, called the Casparian strip, and therefore tightly connected between each other. Very little was known about the development of the endodermis and the Casparian strip until recently. In the meantime, however, we have identified a family of endodermis- specific proteins, the CASPs, which recruits extracellular proteins the specific Casparian strip membrane domain (CSD) to locally synthesize lignin in the cell wall. Yet, we hardly knew any specifics on how the CSD is initially defined and how the critically important CASPs are being recruited to it. We therefore conducted a forward genetic screen on the localization of CASPI-GFP in order to identify novel mutants, which lack a defined CSD. We identified 48 mutants, which fell into 15 different complementation groups. While some of the isolated genes had previously been identified through different approaches, nine novel genes, which had never been implicated in CSD development and maintenance, were identified. One of them, LORD OF THE RINGS 2 (.LOTR2) is described to greater detail in this work. LOTR2 encodes for EX070A1, a protein of the evolutionary conserved exocyst complex. This complex has frequently been implicated in various secretory processes across kingdoms. In Arabidopsis, it transiently defines the positioning of CASPI-GFP. We have performed a detailed analysis of the dynamics of EX070A1 and CASPI-GFP, including studies with other markers and propose a mechanism, by which the cytosolic EX070A1 transiently defines a plasma membrane domain to recruit transmembrane proteins, which then recruit extracellular enzymes for localized cell wall modification. Considering the ubiquitous expression of EX070A1, we think that this mechanism is potentially of importance not only for the endodermis and the Casparian strip but also for many other tissues, in which the cell wall becomes locally modified. In fact, many other tissues with secondary cell wall modifications contain proteins very similar to the CASPs. It will be interesting to see to which degree this mechanism is employed in other tissues. As for the endodermis, we have now identified the first gene, which is not specific to the endodermis but shows endodermis-specific dynamics. This might give us a better insight on how the plant modulates this ubiquitously present factor in a cell- or tissue-type specific manner. Considering the knowledge, mutants and tools, which are available to us for investigating the endodermis, the Casparian strip, the exocyst complex and EX070A1 might be just the right experimental system to address these questions. -- Les organismes multicellulaires dépendent des tissues spécialisé pour l'échange contrôlé entre eux et leur environnement. Pour leur bon fonctionnement, les cellules de ces tissus ont besoin d'être très étroitement assemblés afin de prévenir la diffusion non-contrôlée à travers l'espace extracellulaire. Chez les animaux, ces connexions sont appelées jonctions serrées et jonctions adhérentes. Ces jonctions dépendent des interactions directes entre les protéines des cellules voisines. Ceci n'est pas possible chez les plantes à cause de la paroi cellulaire qui recouvre chaque cellule individuellement. Pour absorber les nutriments et en même temps empêcher la diffusion non-contrôlé entre cellules, les plantes ont évolué 1'endoderme dans la racine, qui est fonctionnellement équivalent aux épithéliums des animaux. Les cellules de l'endoderme sont ceinturées par une déposition de lignine très précisément localisées comme un anneau et alignées entre les cellules, et qui, donc, connecte étroitement les cellules avoisinante: Le cadre de Caspary. Peu était connu sur le développement de l'endoderme et le cadre de Caspaiy jusqu'à il y a quelques années. Récemment, pourtant, nous avons identifié une famille de protéines spécifiques à l'endoderme, les CASPs, qui définissent le domaine membranaire du cadre de Caspaiy (CSD). Les CASPs recrutent les protéines extracellulaires nécessaire à la synthèse du cadre de Caspary vers une région limité dans la paroi cellulaire. Pourtant, on connaît très peu les processus spécifiques concernant la définition initiale du CSD et comment les CASPs, qui ont une importance cruciale, sont recrutées vers ce domaine. Par conséquent nous avons mené un crible génétique sur la localisation du CASPI- GFP, qui sert comme marqueur pour le CSD. Notre but étant d'isoler de nouveaux mutants affectés dans l'établissement du CSD. Nous avons identifié 48 mutants, en 15 groupes de complémentation. Bien que certains des gènes isolés étaient déjà impliqué dans la formation du cadre de Caspary, neuf nouveaux gènes n'ayant jamais été impliqués dans le développement ou la maintenance du CSD ont pu être identifiés. Un de ces gènes, LORD OF THE RINGS2 (LOTR2) sera décrit plus en détail dans cette étude. LOTR2 code pour EX070A1, qui est une protéine, du complexe exocyste. Ce complexe de protéines a très bien été conservé au cours de l'évolution. Il était souvent impliqué dans plusieurs processus de sécrétion dans toutes les branches de la vie. Chez Arabidopsis, EX070A1 définit la position du CSD d'une façon transitoire et recrute CASP1- GFP. Nous avons mené une analyse détaillée des dynamiques d'EX070Al et CASPI-GFP ainsi que, des études avec des autres mutants. Nous proposons un mécanisme, d'après lequel EX070A1, recruté du cytosol, définit un domaine dans la membrane plasmique pour localiser des protéines transmembranaires, ces dernières ensuite recruteront des enzymes extracellulaires pour la modification locale de la paroi cellulaire. Vu qu'EX070A1 est exprimé dans toute dans la plante, nous pensons que ce mécanisme est potentiellement important non seulement pour l'endoderme et le cadre de Caspary, mais aussi pour les autres tissus où la paroi cellulaire doit être localement modifiée. En effet, plusieurs autres tissus contiennent des protéines très similaires aux CASPs. Il serait intéressant de voir à quelle dégrée ce mécanisme est également utilisé dans ces tissues. En ce qui concerne l'endoderme, nous avons maintenant identifié le premier gène qui n'est pas exprimé spécifiquement dans l'endoderme, mais qui montre tout de même une dynamique caractéristique dans ce tissu. Il serait intéressant de voir comment la plante peut moduler ce facteur omniprésent d'une façon spécifique. Vu les connaissances, les mutants et les outils qu'on a maintenant à notre disposition, l'endoderme et son cadre de Caspary, le complexe exocyste et EX070A1 sont probablement des bons systèmes expérimentaux pour étudier ces questions. -- Identification des nouveaux facteurs pendant l'établissement du cadre de Caspary dans l'endoderme. Lothar Kalmbach, Département de Biologie Moléculaire Végétale (DBMV), Université de Lausanne. Comme tous les autres organismes multicellulaires, les plantes terrestres dépendent de tissus spécialisés pour l'échange contrôlé avec leur environnement. Ces tissus sont importants pour l'absorption des nutriments mais également pour éviter l'influx de composés toxiques. Chez les plantes, ce tissu se trouve dans la racine. C'est l'endoderme. Grâce au cadre de Caspary, qui permet une forte connexion entre les cellules au niveau de leur paroi, l'endoderme empêche les éléments toxiques d'entrer dans le système vasculaire. Depuis quelques années, nous comprenons de plus en plus la nature et la biosynthèse, ainsi que les protéines impliquées dans l'ancrage des enzymes à la membrane plasmique. Nous n'avons eu, par contre, aucune idée sur le mécanisme qui d'abord définit cet endroit dans la membrane plasmique. Nous avons mené un crible génétique sur la localisation de CASPI-GFP, une protéine, qui recrute les enzymes extracellulaires pour la synthèse du cadre de Caspary. Nous avons identifié plusieurs nouveaux gènes qui sont impliqués dans l'intégrité du cadre de Caspary. L'un de ces gènes est EX070A1, qui est un facteur ayant un rôle important lors de la sécrétion des protéines dans tous les organismes eukaryotes. Ces mutants sont gravement affectés au niveau du cadre de Caspary, mais surtout ils ne sont plus capables de localiser CASPI-GFP. Nous avons suivi la dynamique d'EX070Al et de CASP1-GFP en combinaison avec d'autres marqueurs. Nous avons pu montrer que l'accumulation d'EX070Al est spécifique pour l'endoderme et essentielle pour bien localiser CASPI-GFP et donc, le cadre de Caspary. Ces résultats nous aident à mieux comprendre le développement de l'endoderme mais peuvent potentiellement aussi être utilisés pour étudier les modifications de la paroi cellulaire dans d'autres cellules de la plante.

Optical Encryption using Photon-Counting Polarimetric Imaging

We present a polarimetric-based optical encoder for image encryption and verification. A system for generating random polarized vector keys based on a Mach-Zehnder configuration combined with translucent liquid crystal displays in each path of the interferometer is developed. Polarization information of the encrypted signal is retrieved by taking advantage of the information provided by the Stokes parameters. Moreover, photon-counting model is used in the encryption process which provides data sparseness and nonlinear transformation to enhance security. An authorized user with access to the polarization keys and the optical design variables can retrieve and validate the photon-counting plain-text. Optical experimental results demonstrate the feasibility of the encryption method.

Study of the optical properties of TeO2-PbO-TiO2 glass system

We describe the preparation and some optical properties of high refractive index TeO2-PbO-TiO2 glass system. Highly homogeneous glasses were obtained by agitating the mixture during the melting process in an alumina crucible. The characterization was done by X-ray diffraction, Raman scattering, light absorption and linear refractive index measurements. The results show a change in the glass structure as the PbO content increases: the TeO4 trigonal bipyramids characteristics of TeO2 glasses transform into TeO3 trigonal pyramids. However, the measured refractive indices are almost independent of the glass composition. We show that third-order nonlinear optical susceptibilities calculated from the measured refractive indices using Lines' theoretical model are also independent of the glass composition.

Optical characterization of sol-gel glasses derived from Eu3+ complex-forming precursors

Fabrication of new optical devices based upon the incorporation of rare earth ions via sol-gel methods depends on elimination of dopant ion clusters and residual hydroxyl groups from the final material. The optical absorption and/or luminescence properties of luminescent rare earth ions are influenced by the local bonding environment and the distribution of the rare-earth dopants in the matrix. Typically, dopants are incorporated into gel via dissolution of soluble species into the initial precursor sol. In this work, Eu3+ is used as optical probe, to assess changes in the local environment. Results of emission, excitation, fluorescence line narrowing and lifetimes studies of Eu3+-doped gels derived from Si(OCH3)4 and fluorinated/chelate Eu3+ precursors are presented. The precursors used in the sol-gel synthesis were: tris (6,6,7,7,8,8,8-heptafluoro-2,2-dimethyl-3,5-octanedionate) Eu(III), Eu (III) trifluoromethanesulfonate, Eu(III) acetylacetonate hydrate, Eu (III) trifluoroacetate trihidrate, tris (2,2,6,6-tetramethyl-3,5- heptanedionate) Eu(III) and Eu(NO3)3.6H2O. The results were interpreted in terms of the evolution of the Eu3+ fluorescence in systems varying from solution to the gels densified to 800ºC. The lifetimes studies indicate that the fluorinated precursors are effective at reducing the water content in densified gels.

Optical Character Recognition for Symbian OS

This Master's thesis addresses the design and implementation of the optical character recognition (OCR) system for a mobile device working on the Symbian operating system. The developed OCR system, named OCRCapriccio, emphasizes the modularity, effective extensibility and reuse. The system consists of two parts which are the graphical user interface and the OCR engine that was implemented as a plug-in. In fact, the plug-in includes two implementations of the OCR engine for enabling two types of recognition: the bitmap comparison based recognition and statistical recognition. The implementation results have shown that the approach based on bitmap comparison is more suitable for the Symbian environment because of its nature. Although the current implementation of bitmap comparison is lacking in accuracy, further development should be done in its direction. The biggest challenges of this work were related to developing an OCR scheme that would be suitable for Symbian OS Smartphones that have limited computational power and restricted resources.

Use of the Optical Cantilever Microphone in Photoacoustic Spectroscopy

A novel cantilever pressure sensor was developed in the Department of Physics at the University of Turku in order to solve the sensitivity problems which are encountered when condenser microphones are used in photoacoustic spectroscopy. The cantilever pressure sensor, combined with a laser interferometer for the measurement of the cantilever movements, proved to be highly sensitive. The original aim of this work was to integrate the sensor in a photoacoustic gas detector working in a differential measurement scheme. The integration was made successfully into three prototypes. In addition, the cantilever was also integrated in the photoacoustic FTIR measurement schemes of gas-, liquid-, and solid-phase samples. A theoretical model for the signal generation in each measurement scheme was created and the optimal celldesign discussed. The sensitivity and selectivity of the differential method were evaluated when a blackbody radiator and a mechanical chopper were used with CO₂, CH4, CO, and C2H4 gases. The detection limits were in the sub-ppm level for all four gases with only a 1.3 second integration time and the cross interference was well below one percent for all gas combinations other than those between hydrocarbons. Sensitivity with other infrared sources was compared using ethylene as an example gas. In the comparison of sensitivity with different infrared sources the electrically modulated blackbody radiator gave a 35 times higher and the CO2-laser a 100 times lower detection limit than the blackbody radiator with a mechanical chopper. As a conclusion, the differential system is well suited to rapid single gas measurements. Gas-phase photoacoustic FTIR spectroscopy gives the best performance, when several components have to be analyzed simultaneously from multicomponent samples. Multicomponent measurements were demonstrated with a sample that contained different concentrations of CO₂, H₂O, CO, and four different hydrocarbons. It required an approximately 10 times longer measurement time to achieve the same detection limit for a single gas as with the differential system. The properties of the photoacoustic FTIR spectroscopy were also compared to conventional transmission FTIR spectroscopy by simulations. Solid- and liquid-phase photoacoustic FTIR spectroscopy has several advantages compared to other techniques and therefore it also has a great variety of applications. A comparison of the signal-to-noise ratio between photoacoustic cells with a cantilever microphone and a condenser microphone was done with standard carbon black, polyethene, and sunflower oil samples. The cell with the cantilever microphone proved to have a 5-10 times higher signal-to-noise ratio than the reference detector, depending on the sample. Cantilever enhanced photoacoustics will be an effective tool for gas detection and analysis of solid- and liquid-phase samples. The preliminary prototypes gave good results in all three measurement schemes that were studied. According to simulations, there are possibilities for further enhancement of the sensitivity, as well as other properties, of each system.

Three Wavelength Optical Probe for Surface Roughness Measurements of Paper Samples

In the present diploma work optical inspection methods were used to investigate surface roughness of paper samples. A special measurement setup, which includes three laser light sources of three different wavelengths, photodetector and goniometer, was used to measure the reflected laser light properties. The intensity of the light reflected in specular direction was measured versus the laser incidence angle for reference metal sample. The value of roughness was estimated and compared to initially known value of metal sample roughness. Thus, the measurement equipment and method were validated. Then the reflected intensity was measured versus reflection angle at constant incidence angle for the same metal sample and paper samples under investigation. The final values of the surface roughness were obtained from the analysis of the reflected intensity dependence. The results are in good correlation with other research groups.

Surface passivation and optical characterization of Al2O3/a-SiCx stacks on c-Si substrates

Postprint (published version)

All-Optical Unicast/Multicast Routing in WDM Networks

Optical transport networks (OTN) must be prepared in terms of better resource utilization, for accommodating unicast and multicast traffic together. Light-trees have been proposed for supporting multicast connections in OTN. Nevertheless when traffic grooming is applied in light-trees, resources can be underutilized as traffic can be routed to undesirable destinations in order to avoid optical-electrical-optical (OEO) conversions. In this paper, a novel architecture named S/G light- tree for supporting unicast/multicast connections is proposed. The architecture allows traffic dropping and aggregation in different wavelengths without performing OEO conversions. A heuristic that routes traffic demands using less wavelengths by taking advantage of the proposed architecture is designed as well. Simulation results show that the architecture can minimize the number of used wavelengths and OEO conversions when compared to light-trees

Exposure to Tobacco Smoke and Markers of Subclinical Atherosclerosis in Children and Adolescents. The STRIP Study.

Background: Measurement of serum cotinine, a major metabolite of nicotine, provides a valid marker for quantifying exposure to tobacco smoke. Exposure to tobacco smoke causes vascular damage by multiple mechanisms, and it has been acknowledged as a risk factor for atherosclerosis. Multifactorial atherosclerosis begins in childhood, but the relationship between exposure to tobacco smoke and arterial changes related to early atherosclerosis have not been studied in children. Aims: The aim of the present study was to evaluate exposure to tobacco smoke with a biomarker, serum cotinine concentration, and its associations with markers of subclinical atherosclerosis and lipid profile in school-aged children and adolescents. Subjects and Methods: Serum cotinine concentration was measured using a gas chromatographic method annually between the ages 8 and 13 years in 538-625 children participating since infancy in a randomized, prospective atherosclerosis prevention trial STRIP (Special Turku coronary Risk factor Intervention Project). Conventional atherosclerosis risk factors were measured repeatedly. Vascular ultrasound studies were performed among 402 healthy 11-year-old children and among 494 adolescents aged 13 years. Results: According to serum cotinine measurements, a notable number of the school aged children and adolescents were exposed to tobacco smoke, but the exposure levels were only moderate. Exposure to tobacco smoke was associated with decreased endothelial function as measured with flow-mediated dilation of the brachial artery, decreased elasticity of the aorta, and increased carotid and aortic intima-media thickness. Longitudinal exposure to tobacco smoke was also related with increased apolipoprotein B and triglyceride levels in 13-year-old adolescents, whose body mass index and nutrient intakes did not differ. Conclusions: These findings suggest that exposure to tobacco smoke in childhood may play a significant role in the development of early atherosclerosis. Key Words: arterial elasticity, atherosclerosis, children, cotinine, endothelial function, environmental tobacco smoke, intima-media thickness, risk factors, ultrasound

A novel method for fast enrichment and monitoring of hexavalent and trivalent chromium at the ppt level with modified silica MCM-41 and its determination by inductively coupled plasma optical emission spectrometry

Chromium(III) at the ng L-1 level was extracted using partially silylated MCM-41 modified by a tetraazamacrocyclic compound (TAMC) and determined by inductively coupled plasma optical emision spectrometry (ICP OES). The extraction time and efficiency, pH and flow rate, type and minimum amount of stripping acid, and break- through volume were investigated. The method's enrichment factor and detection limit are 300 and 45.5 pg mL-1, respectively. The maximum capacity of the 10 mg of modified silylated MCM-41 was found to be 400.5±4.7 µg for Cr(III). The method was applied to the determination of Cr(III) and Cr(VI) in the wastewater of the chromium electroplating industry and in environmental and biological samples (black tea, hot and black pepper).

The influence of a certain volume of fluid in the lower tear meniscus on intraocular pressure measurements using the non-contact tonometer

Background: Intraocular pressure (IOP) is the pressure inside the eye that helps to maintain the integrity and the suitable form of the ocular globe. Precise and accurate measures of IOP are needed for the diagnosis as well as follow-up of glaucoma. In daily clinical practice, Goldmann applanation tonometer (GAT) and Non-contact tonometer (NCT) are the most common devices for measuring IOP. A close agreement between these methods has been showed, particularly in normotensive patients and a poor agreement, especially when IOP levels are above the normal range. Ophthalmologists have noticed a poor agreement between NCT and GAT, observing that by using NCT and after comparing with GAT, there is an overestimation of IOP readings, and particularly it occurs when the eyes are tearful. Previous studies investigate the effect of tears in Non-contact tonometer readings by the instillation of artificial tears, concluding in one of the studies that the variation was less than 1mmHg and not clinically significant, in contrast with another study which the increases were sadistically significant. Tear menisci are a thin strip of tear fluid located between the bulbar conjunctiva and the eyelid margins. We think that the overestimation of IOP readings using NCT could be due to the presence of a higher volume of tear in the lower tear meniscus which might cause an optical interference in the optoelectronic applanation monitoring system of this deviceObjectives: To research the influence of a certain volume of fluid in the lower tear meniscus on IOP measurements using the NCT in healthy eyes. Moreover, to investigate the agreement between IOP readings obtained by NCT and GAT in the presence and absence of this volume of fluidMethods: The study design will be transversal for diagnostic tests of repeated measures. We will study patients with no ocular pathology and IOP<21mmHg. It will consist in the measurement of IOP using NCT before and after the instillation of COLIRCUSÍ FLUOTEST, used as a volume of fluid in the lower tear meniscus, to observe if there will be differences using the paired t-test. Moreover, we will take IOP measures by GAT in order to know the agreement between these methods after and before the application of these eyedrops, using the ICC (intraclass correlation coefficient) and the Bland-Altmann method

Optical and microstructural properties of MgF2 UV coatings grown by ion beam sputtering process

The optical, mechanical, and microstructural properties of MgF2 single layers grown by ion beam sputtering have been investigated by spectrophotometric measurements, film stress characterization, x-ray photoelectron spectroscopy (XPS), x-ray diffraction, and transmission electron microscopy. The deposition conditions, using fluorine reactive gas or not, have been found to greatly influence the optical absorption and the stress of the films as well as their microstructure. The layers grown with fluorine compensation exhibit a regular columnar microstructure and an UV-optical absorption which can be very low, either as deposited or after thermal annealings at very low temperatures. On the contrary, layers grown without fluorine compensation exhibit a less regular microstructure and a high ultraviolet absorption which is particularly hard to cure. On the basis of calculations, it is shown that F centers are responsible for this absorption, whereas all the films were found to be stoichiometric, in the limit of the XPS sensitivity. On the basis of external data taken from literature, our experimental curves are analyzed, so we propose possible diffusion mechanisms which could explain the behaviors of the coatings.

Alternative technique for biodiesel quality control using an optical fiber long-period grating sensor

We report the use of an optical fiber sensor to measure the soybean oil concentration in samples obtained from the mixture of pure biodiesel and commercial soybean oil. The operation of the device is based on the long-period grating sensitivity to the surrounding medium refractive index, which leads to measurable modifications in the grating transmission spectrum. The proposed analysis method results in errors in the oil concentration of 0.4% and 2.6% for pure biodiesel and commercial soybean oil, respectively. Techniques of total glycerol, dynamic viscosity, density, and hydrogen nuclear magnetic resonance spectroscopy were also employed to validate the proposed method.

Preparation of glasses and glass ceramics of heavy metal oxides containing silver: optical, structural and electrochemical properties

Silver containing heavy metal oxide glasses and glass ceramics of the system WO3-SbPO4-PbO-AgCl with different AgCl contents have been prepared and their thermal, structural and optical properties characterized. Glass ceramics containing metallic silver nanoparticles have been prepared by annealing glass samples at temperatures above the glass transition and analyzed by transmission electron microscopy and energy dispersive X-ray microanalysis. The presence of the metallic clusters has been also confirmed by the observation of a surface plasmon resonance band in the visible range. Cyclic voltammetric measurements indicated the presence of metallic silver into the glasses, even before to perform the thermal treatment.