Bactrocera frauenfeldi (Diptera: Tephritidae), an invasive fruit fly in Australia that may have reached the extent of its spread due to environmental variables

Bactrocera frauenfeldi (Schiner), the ‘mango fruit fly’, is a horticultural pest originating from the Papua New Guinea region. It was first detected in Australia on Cape York Peninsula in north Queensland in 1974 and had spread to Cairns by 1994 and Townsville by 1997. Bactrocera frauenfeldi has not been recorded further south since then despite its invasive potential, an absence of any controls and an abundance of hosts in southern areas. Analysis of cue-lure trapping data from 1997 to 2012 in relation to environmental variables shows that the distribution of B. frauenfeldi in Queensland correlates to locations with a minimum temperature for the coldest month >13.2°C, annual temperature range <19.3°C, mean temperature of the driest quarter >20.2°C, precipitation of the wettest month >268 mm, precipitation of the wettest quarter >697 mm, temperature seasonality <30.9°C (i.e. lower temperature variability) and areas with higher human population per square kilometre. Annual temperature range was the most important variable in predicting this species' distribution. Predictive distribution maps based on an uncorrelated subset of these variables reasonably reflected the current distribution of this species in northern Australia and predicted other areas in the world potentially at risk from invasion by this species. This analysis shows that the distribution of B. frauenfeldi in Australia is correlated to certain environmental variables that have most likely limited this species' spread southward in Queensland. This is of importance to Australian horticulture in demonstrating that B. frauenfeldi is unlikely to establish in horticultural production areas further south than Townsville.

Lesser auger beetle Heterobostrychus aequalis(Coleoptera: Bostrichidae) in Australia: absent or elusive?

The lesser auger beetle, Heterobostrychus aequalis (Waterhouse), is a serious pest of seasoned hardwood timber throughout the Oriental region and several areas beyond. Some early collection records of H. aequalis from Australia in the 1950s and 1960s indicated that the insect was present in northern Queensland, but no confirmed breeding population has been found in the past few decades suggesting either that it may have not established permanently or it is difficult to detect. The ambiguity about the breeding status of the pest in Australia has caused confusion for regulating authorities needing to respond to each new post-border detection. We examined records of H. aequalis in Australian insect collections and from intensive plant pest surveillance activities in Queensland and northern Australia over the past 48 years to resolve this confusion. Until very recently, available evidence suggested that H. aequalis was not established in Australia, despite multiple introductions and apparently suitable climate and hosts. Collection records of the pest are predominantly linked to intercepted items or are recorded as of unknown origin, and no established populations have been found during many years of targeted surveillance. However, a detection of H. aequalis in suburban Cairns, north Queensland, in late 2013 and two more in mid-2015 in the same general locality do not appear to be linked to any imported material, indicating that there is at least a tenuously established local population. Investigations are underway to confirm this, but the insect is not widely established in Australia and, if present, remains elusive. Our recommended response to any future detection of H. aequalis is to fumigate or destroy the infested material, conduct tracing enquiries and limit surveys to the immediate vicinity of the detection.

The mating system of the true fruit fly Bactrocera tryoniand its sister-species,Bactrocera neohumeralis

The frugivorous ‘true’ fruit fly, Bactrocera tryoni (Queensland fruit fly), is presumed to have a non-resourced-based lek mating system. This is largely untested, and contrary data exists to suggest Bactrocera tryoni may have a resource-based mating system focused on fruiting host plants. We tested the mating system of Bactrocera tryoni, and its close sibling Bactrocera neohumeralis, in large field cages using laboratory reared flies. We used observational experiments that allowed us to determine if: (i) mating pairs were aggregated or non-aggregated; (ii) mating system was resource or non-resource based; (iii) flies utilised possible landmarks (tall trees over short) as mate-rendezvous sites; and (iv) males called females from male-dominated leks. We recorded nearly 250 Bactrocera tryoni mating pairs across all experiments, revealing that: (i) mating pairs were aggregated; (ii) mating nearly always occurred in tall trees over short; (iii) mating was non-resource based; and (iv) that males and females arrived at the mate-rendezvous site together with no evidence that males preceded females. Bactrocera neohumeralis copulations were much more infrequent (only 30 mating pairs in total), but for those pairs there was a similar preference for tall trees and no evidence of a resource-based mating system. Some aspects of Bactrocera tryoni mating behaviour align with theoretical expectations of a lekking system, but others do not. Until evidence for unequivocal female choice can be provided (as predicted under a true lek), the mating system of Bactrocera tryoni is best described as a non-resource based, aggregation system for which we also have evidence that land-marking may be involved. This article is protected by copyright. All rights reserved

The role of spiders as predators of two lepidopteran Brassica pests

Spiders are thought to play a significant role in limiting pest outbreaks in agroecosystems such as vineyards, orchards and cotton. The diversity and impact of spiders in vegetable crops are less well understood, although there is evidence that predators may be important for suppression of lepidopteran pests in Brassica crops, particularly early in the season before parasitoids become established. Sampling was conducted in early season plantings of Brassicas in the Lockyer Valley (South East Queensland, Australia) in order to determine the most commonly occurring spider families. The most numerous were Theridiidae, which were more strongly associated with cauliflower and poorly associated with cabbage. The Lycosidae and Clubionidae/Miturgidae (formerly in the ‘catch-all’ family Clubionidae) also occurred commonly. Lycosidae (and to a lesser extent Salticidae) had above average abundance in Chinese cabbage and below average abundance in broccoli compared with average abundance for these spider families; Clubionidae/Miturgidae had above average abundance in cauliflower. Laboratory studies were then conducted to explore the predatory capacity of these three most commonly occurring spider families. All three were capable of feeding on larvae of the diamondback moth, Plutella xylostella (Linnaeus), and cabbage cluster caterpillar, Crocidolomia pavonana (Fabricius), under laboratory conditions. Theridiidae, which are thought to prey on small pests such as leafhoppers and aphids, were able to successfully attack larvae up to five times their body size. Predation rates varied from an average of 1.7 (SE = 0.47) (1.6 control corrected) larvae consumed over a 24 h period in the case of the Theridiidae, to 3.3 (SE = 0.60) larvae for the Clubionidae/Miturgidae.

Spatial ecology of a specialist insect herbivore : the leaf-mining moth Tischeria ekebladella on the pedunculate oak Quercus robur

Herbivorous insects comprise a major part of terrestrial biodiversity, and their interactions with their host plants and natural enemies are of vast ecological importance. A large body of research demonstrates that the ecology and evolution of these insects may be affected by trophic interactions, by abiotic influences, and by intraspecific processes, but so far research on these individual aspects has rarely been combined. This thesis uses the leaf-mining moth Tischeria ekebladella and the pedunculate oak (Quercus robur) as a case study to assess how spatial variation in trophic interactions and the physical distribution of host trees jointly affect the distribution, dynamics and evolution of a host-specific herbivore. With respect to habitat quality, Tischeria ekebladella experiences abundant variation at several spatial scales. Most of this variation occurs at small scales notably among leaves and shoots within individual trees. While hypothetically this could cause moths to evolve an ability to select leaves and shoots of high quality, I did not find any coupling between female preference and offspring performance. Based on my studies on temporal variation in resource quality I therefore propose that unpredictable temporal changes in the relative rankings of individual resource units may render it difficult for females to predict the fate of their developing offspring. With respect to intraspecific processes, my results suggest that limited moth dispersal in relation to the spatial distribution of oak trees plays a key role in determining the regional distribution of Tischeria ekebladella. The distribution of the moth is aggregated at the landscape level, where local leaf miner populations are less likely to be present where oaks are scarce. A modelling exercise based on empirical dispersal estimates revealed that the moth population on Wattkast an island in south-western Finland is spatially structured overall, but that the relative importance of local and regional processes on tree-specific moth dynamics varies drastically across the landscape. To conclude, my work in the oak-Tischeria ekebladella system demonstrates that the local abundance and regional distribution of a herbivore may be more strongly influenced by the spatial location of host trees than by their relative quality. Hence, it reveals the importance of considering spatial context in the study of herbivorous insects, and forms a bridge between the classical fields of plant-insect interactions and spatial ecology.

A generic individual-based spatially explicit model as a novel tool for investigating insect-plant interactions: A case study of the behavioural ecology of frugivorous Tephritidae

Computational modelling of mechanisms underlying processes in the real world can be of great value in understanding complex biological behaviours. Uptake in general biology and ecology has been rapid. However, it often requires specific data sets that are overly costly in time and resources to collect. The aim of the current study was to test whether a generic behavioural ecology model constructed using published data could give realistic outputs for individual species. An individual-based model was developed using the Pattern-Oriented Modelling (POM) strategy and protocol, based on behavioural rules associated with insect movement choices. Frugivorous Tephritidae (fruit flies) were chosen because of economic significance in global agriculture and the multiple published data sets available for a range of species. The Queensland fruit fly (Qfly), Bactrocera tryoni, was identified as a suitable individual species for testing. Plant canopies with modified architecture were used to run predictive simulations. A field study was then conducted to validate our model predictions on how plant architecture affects fruit flies’ behaviours. Characteristics of plant architecture such as different shapes, e.g., closed-canopy and vase-shaped, affected fly movement patterns and time spent on host fruit. The number of visits to host fruit also differed between the edge and centre in closed-canopy plants. Compared to plant architecture, host fruit has less contribution to effects on flies’ movement patterns. The results from this model, combined with our field study and published empirical data suggest that placing fly traps in the upper canopy at the edge should work best. Such a modelling approach allows rapid testing of ideas about organismal interactions with environmental substrates in silico rather than in vivo, to generate new perspectives. Using published data provides a saving in time and resources. Adjustments for specific questions can be achieved by refinement of parameters based on targeted experiments.

Characterization of the genome of Oryctes baculovirus, a viral biocide of the insect pest Oryctes rhinoceros

Oryctes baculovirus is a viral biocide exploited for the control of the insect pest Oryctes rhinoceros. We have recently established a physical map of the genome of the Indian isolate of Oryctes baculovirus (OBV-KI). Here we examine the genomic relatedness between OBV-KI and OBV-PV505, the type isolate (originally from the Philippines), by DNA reassociation kinetics and by the use of restriction endonucleases. On the basis of differences in restriction-enzyme profiles between the two genomes, and previously reported differences in protein profiles and antigenic makeup, we propose the taxonomic status of a variant of Oryctes baculovirus for the Indian isolate.

Detection of a CpA methylase in an insect system: characterization and substrate specificity

A cytosine-specific DNA methyltransferase (EC 2.1.1.37) has been purified to near homogeneity from a mealybug (Planococcus lilacinus). The enzyme can methylate cytosine residues in CpG sequences as well as CpA sequences. The apparent molecular weight of the enzyme was estimated as 135,000 daltons by FPLC. The enzyme exhibits a processive mode of action and a salt dependance similar to mammalian methylases. Mealybug methylase exhibits a preference for denatured DNA substrates.

Piezoelectrically actuated insect scale flapping wing

An energy method is used in order to derive the non-linear equations of motion of a smart flapping wing. Flapping wing is actuated from the root by a PZT unimorph in the piezofan configuration. Dynamic characteristics of the wing, having the same size as dragonfly Aeshna Multicolor, are analyzed using numerical simulations. It is shown that flapping angle variations of the smart flapping wing are similar to the actual dragonfly wing for a specific feasible voltage. An unsteady aerodynamic model based on modified strip theory is used to obtain the aerodynamic forces. It is found that the smart wing generates sufficient lift to support its own weight and carry a small payload. It is therefore a potential candidate for flapping wing of micro air vehicles.

Changing resonator geometry to boost sound power decouples size and song frequency in a small insect

Despite their small size, some insects, such as crickets, can produce high amplitude mating songs by rubbing their wings together. By exploiting structural resonance for sound radiation, crickets broadcast species-specific songs at a sharply tuned frequency. Such songs enhance the range of signal transmission, contain information about the signaler's quality, and allow mate choice. The production of pure tones requires elaborate structural mechanisms that control and sustain resonance at the species-specific frequency. Tree crickets differ sharply from this scheme. Although they use a resonant system to produce sound, tree crickets can produce high amplitude songs at different frequencies, varying by as much as an octave. Based on an investigation of the driving mechanism and the resonant system, using laser Doppler vibrometry and finite element modeling, we show that it is the distinctive geometry of the crickets' forewings (the resonant system) that is responsible for their capacity to vary frequency. The long, enlarged wings enable the production of high amplitude songs; however, as a mechanical consequence of the high aspect ratio, the resonant structures have multiple resonant modes that are similar in frequency. The drive produced by the singing apparatus cannot, therefore, be locked to a single frequency, and different resonant modes can easily be engaged, allowing individual males to vary the carrier frequency of their songs. Such flexibility in sound production, decoupling body size and song frequency, has important implications for conventional views of mate choice, and offers inspiration for the design of miniature, multifrequency, resonant acoustic radiators.