Traceability-based access recommendation

Devido à grande quantidade de dados disponíveis na Internet, um dos maiores desafios no mundo virtual é recomendar informação aos seus utilizadores. Por outro lado, esta grande quantidade de dados pode ser útil para melhorar recomendações se for anotada e interligada por dados de proveniência. Neste trabalho é abordada a temática de recomendação de (alteração de) permissões acesso sobre recursos ao seu proprietário, ao invés da recomendação do próprio recurso a um potencial consumidor/leitor. Para permitir a recomendação de acessos a um determinado recurso, independentemente do domínio onde o mesmo se encontra alojado, é essencial a utilização de sistemas de controlo de acessos distribuídos, mecanismos de rastreamento de recursos e recomendação independentes do domínio. Assim sendo, o principal objectivo desta tese é utilizar informação de rastreamento de acções realizadas sobre recursos (i.e. informação que relaciona recursos e utilizadores através da Web independentemente do domínio de rede) e utiliza-la para permitir a recomendação de privilégios de acesso a esses recursos por outros utilizadores. Ao longo do desenvolvimento da tese resultaram as seguintes contribuições: A análise do estado da arte de recomendação e de sistemas de recomendação potencialmente utilizáveis na recomendação de privilégios (secção 2.3); A análise do estado da arte de mecanismos de rastreamento e proveniência de informação (secção 2.2); A proposta de um sistema de recomendação de privilégios de acesso independente do domínio e a sua integração no sistema de controlo de acessos proposto anteriormente (secção 3.1); Levantamento, análise e especificação da informação relativa a privilégios de acesso, para ser utilizada no sistema de recomendação (secção 2.1); A especificação da informação resultante do rastreamento de acções para ser utilizada na recomendação de privilégios de acesso (secção 4.1.1); A especificação da informação de feedback resultante do sistema de recomendação de acessos e sua reutilização no sistema de recomendação(secção 4.1.3); A especificação, implementação e integração do sistema de recomendação de privilégios de acesso na plataforma já existente (secção 4.2 e secção 4.3); Realização de experiências de avaliação ao sistema de recomendação de privilégios, bem como a análise dos resultados obtidos (secção 5).

O impacto da implementação do Basel III no capital dos bancos portugueses

Este trabalho é uma análise dos efeitos da implementação das últimas recomendações do Basel Committee on Banking Supervision (BCBS) também conhecidas como o Basel III de 2010 que deverão ser faseadamente implementadas desde 1 de Janeiro de 2013 até 1 de Janeiro de 2019, no capital próprio dos bancos Portugueses. Neste trabalho assume-se que os ativos pesados pelo risco de 2012 mantêm-se constantes e o capital terá de ser aumentado segundo as recomendações ano após ano até ao fim de 2018. Com esta análise, pretende-se entender o nível de robustez do capital próprio dos bancos Portugueses e se os mesmos têm capital e reservas suficientes para satisfazer as recomendações de capital mínimo sugeridas pelo BCBS ou caso contrário, se necessitarão de novas injeções de capital ou terão de reduzir a sua atividade económica. O Basel III ainda não foi implementado em Portugal, pois a União Europeia está no processo de desenvolvimento e implementação do Credit Requirement Directive IV (CRD IV) que é uma recomendação que todos os bancos centrais dos países da zona Euro deverão impor aos respetivos bancos. Esta diretiva da União Europeia é baseada totalmente nas recomendações do Basel III e deverá ser implementada em 2014 ou nos anos seguintes. Até agora, os bancos Portugueses seguem um sistema com base no aviso 6/2010 do Banco de Portugal que recomenda o cálculo dos rácios core tier 1, tier 1 e tier 2 usando o método notações internas (IRB) de avaliação da exposição do banco aos riscos de crédito, operacional, etc. e onde os ativos ponderados pelo risco são calculados como 12,5 vezes o valor dos requisitos totais de fundos calculados pelo banco. Este método é baseado nas recomendações do Basel II que serão substituídas pelo Basel III. Dado que um dos principais motivos para a crise económica e financeira que assolou o mundo em 2007 foi a acumulação de alavancagem excessiva e gradual erosão da qualidade da base do capital próprio dos bancos, é importante analisar a posição dos bancos Portugueses, que embora não sejam muito grandes a nível global, controlam a economia do país. Espera-se que com a implementação das recomendações do Basel III não haja no futuro uma repetição dos choques sistémicos de 2007. Os resultados deste estudo usando o método padrão recomendado pelo BCBS mostram que de catorze bancos Portugueses incluídos neste estudo, apenas seis (BES, Montepio, Finantia, BIG, Invest e BIC) conseguem enquadrar nas recomendações mínimas do Basel III até 1-1- 2019 e alguns outros estão marginalmente abaixo dos rácios mínimos (CGD, Itaú e Crédito Agrícola).

Constructing Cultural Policies in Romania. A possible model for communicating the national value system

The premise of this paper is that a model for communicating the national value system must start from a strategy aimed at the identification, the cultivation and communication of values that give consistency to the value system. The analysis concentrates on the elements of such strategies and on the implications of applying a value communication program on the identity architecture of the community. The paper will also discuss the role of the national value system in the context of the emerging global culture, where the individual has the power to create his/her own hybrid cultural model.

Simultaneous distillation–extraction of high-value volatile compounds from Cistus ladanifer L.

The present paper describes a procedure to isolate volatiles from rock-rose (Cistus ladanifer L.) using simultaneous distillation–extraction (SDE). High-value volatile compounds (HVVC) were selected and the influence of the extraction conditions investigated. The effect of the solvent nature and extraction time on SDE efficiency was studied. The best performance was achieved with pentane in 1 h operation. The extraction efficiencies ranged from 65% to 85% and the repeatability varied between 4% and 6% (as a CV%). The C. ladanifer SDE extracts were analysed by headspace solid phase microextraction (HS-SPME) followed by gas chromatography with flame ionization detection (GC-FID). The HS-SPME sampling conditions such as fiber coating, temperature, ionic strength and exposure time were optimized. The best results were achieved with an 85 µm polyacrylate fiber for a 60 min headspace extraction at 40ºC with 20% (w/v) of NaCl. For optimized conditions the recovery was in average higher than 90% for all compounds and the intermediate precision ranged from 4 to 9% (as CV %). The volatiles α-pinene (22.2 mg g−1 of extract), 2,2,6-trimethylcyclohexanone (6.1 mg g−1 of extract), borneol (3.0 mg g−1 of extract) and bornyl acetate (3.9 mg g−1 of extract) were identified in the SDE extracts obtained from the fresh plant material.

Nutritional value and influence of the thermal processing on a traditional Portuguese fermented sausage (alheira)

Alheiras are a traditional, smoked, fermented meat sausage, produced in Portugal, with an undeniable cultural and gastronomic legacy. In this study, we assessed the nutritional value of this product, as well as the influence of different types of thermal processing. Alheiras from Mirandela were submitted to six different procedures: microwave, skillet, oven, charcoal grill, electric fryer and electric grill. Protein, fat, carbohydrate, minerals, NaCl, and cholesterol contents, as well as fatty acid profile were evaluated. The results show that alheiras are not hypercaloric but an unbalanced foodstuff (high levels of proteins and lipids) and the type of processing has a major impact on their nutritional value. Charcoal grill is the healthiest option: less fat (12.5 g/100 g) and cholesterol (29.3 mg/100 g), corresponding to a lower caloric intake (231.8 kcal, less 13% than the raw ones). Inversely, fried alheiras presented the worst nutritional profile, with the highest levels of fat (18.1 g/100 g) and cholesterol (76.0 g/100 g).

Adding value [valorization] to tannery fleshings: part II – effect of protein hydrolysates on leather dyeing

The tanning industry generates a high quantity of solid wastes. Therefore, there is a need to create valorization [added value] options for these wastes. The main objective of the present work was to study the effect of protein hydrolysates (HP) prepared from fleshings on leather dyeing. During previous studies it was found that the application of HP products, obtained from fleshings, in leather retannage intensified the colour of crust leather. In this work the CIELAB colour system was used to evaluate the effect of HP on retannage processes. The main conclusions of this study were: (i) HP can be used instead of a dicyanodiamide resin (Fortan DC) if the colour parameters of the standard procedure are to be maintained, and (ii) the replacement of an acrylic resin (Fortan A40) by glutaraldehyde-modified HP (GHP) results in a darker skin, and can therefore be interesting for the reduction of the quantity of dye used.

Criação de valor - O Cash Value Added como métrica de avaliação da Performance empresarial

Mestrado em Contabilidade e Gestão das Instituições Financeiras

O contributo do Value For Money na análise da atividade do transporte não urgente de doentes

Mestrado em Auditoria

Análise da problemática da exposição dos músicos ao ruído: perceção ao ruído e determinação dos níveis de pressão sonora na prática musical em contexto escolar

A atenção face dada à problemática da perda auditiva induzida pelo ruído nos profissionais da música tem sido enfatizada estudos nos últimos anos. No entanto, no que respeita aos alunos de música, são ainda poucos os estudos que analisam esta problemática de modo a permitir compreender se estes poderão estar expostos a elevados níveis de ruído no decorrer da sua formação e desenvolver problemas auditivos. O presente estudo pretende caraterizar os níveis de pressão sonora a que alunos de música estão expostos no decorrer das aulas e analisar a perceção do risco dos mesmos e potenciais efeitos sobre o sistema auditivo. Foram analisadas duas Orquestras de Jazz e uma Orquestra Sinfónica de uma Escola Superior de Música (ESM) e de um Conservatório de Música (CM). No total foram selecionados 24 alunos de acordo com o seu instrumento, e medidos os níveis de pressão sonora em diversas aulas, ao longo de duas semanas com recurso a 8 dosímetros. Foi aplicado um questionário para a análise da perceção dos alunos ao ruído e realizados exames audiométricos para a avaliação auditiva dos alunos. Em geral, os resultados demostraram que os alunos estão expostos a níveis elevados de ruído no decurso das aulas de instrumento e ensaios. Foram obtidos elevados níveis de Lp,A,eqT na bateria, vibrafone, saxofone, trombone, clarinete e trompa. Nas três escolas, verificou-se valores mais baixos de exposição no contrabaixo, nomeadamente nas Aulas Individuais. Os valores de Lp,Cpico ultrapassaram o valor de ação inferior de 135 dB(C) na percussão e saxofone. Nas aulas teóricas os valores obtidos ultrapassaram recomendação de 35 dB(A). No que respeita à perceção dos alunos verificou-se que em geral consideram que a exposição a elevados níveis de pressão sonora não tem efeitos significativos na saúde. Apesar de se ter verificado que todos os alunos avaliados apresentam uma audição normal, tinnitus, hiperacusia, distorção e diplacusia foram identificados por um número significativo de alunos. Os resultados obtidos neste estudo refletem a necessidade de implementação de medidas de prevenção e controlo dos níveis de exposição dos alunos de música com vista a um aumento da sua consciencialização do risco.

Evaluation of distinct input methods of an intelligent wheelchair in simulated and real environments: a performance and usability study

This paper focuses on evaluating the usability of an Intelligent Wheelchair (IW) in both real and simulated environments. The wheelchair is controlled at a high-level by a flexible multimodal interface, using voice commands, facial expressions, head movements and joystick as its main inputs. A Quasi-experimental design was applied including a deterministic sample with a questionnaire that enabled to apply the System Usability Scale. The subjects were divided in two independent samples: 46 individuals performing the experiment with an Intelligent Wheelchair in a simulated environment (28 using different commands in a sequential way and 18 with the liberty to choose the command); 12 individuals performing the experiment with a real IW. The main conclusion achieved by this study is that the usability of the Intelligent Wheelchair in a real environment is higher than in the simulated environment. However there were not statistical evidences to affirm that there are differences between the real and simulated wheelchairs in terms of safety and control. Also, most of users considered the multimodal way of driving the wheelchair very practical and satisfactory. Thus, it may be concluded that the multimodal interfaces enables very easy and safe control of the IW both in simulated and real environments.

A Perturbation and Observation Routine Used To Control A Power Converter

This paper presents a programable perturbation and observation control implementation for a wind generation system and its power electronic converter. The objective of the method in this particular application is to adjust the power delivered to charge a battery to its maximum and allowable value, function of the real values of several parameters and their continuous variation, the most important the wind velocity and the turbine efficiency. Also, to improve the power throughput and to use the turbine and generator marginal zones of operation, an unusual power converter is used, allowing a wide range for the input voltage values. The implemented control is continuously measuring the actual power and looks for a new and powerful operation point. © 2014 IEEE.

Effect of technical parameters on dose and image quality in a computed radiography system

The discovery of X-rays was undoubtedly one of the greatest stimulus for improving the efficiency in the provision of healthcare services. The ability to view, non-invasively, inside the human body has greatly facilitated the work of professionals in diagnosis of diseases. The exclusive focus on image quality (IQ), without understanding how they are obtained, affect negatively the efficiency in diagnostic radiology. The equilibrium between the benefits and the risks are often forgotten. It is necessary to adopt optimization strategies to maximize the benefits (image quality) and minimize risk (dose to the patient) in radiological facilities. In radiology, the implementation of optimization strategies involves an understanding of images acquisition process. When a radiographer adopts a certain value of a parameter (tube potential [kVp], tube current-exposure time product [mAs] or additional filtration), it is essential to know its meaning and impact of their variation in dose and image quality. Without this, any optimization strategy will be a failure. Worldwide, data show that use of x-rays has been increasingly frequent. In Cabo Verde, we note an effort by healthcare institutions (e.g. Ministry of Health) in equipping radiological facilities and the recent installation of a telemedicine system requires purchase of new radiological equipment. In addition, the transition from screen-films to digital systems is characterized by a raise in patient exposure. Given that this transition is slower in less developed countries, as is the case of Cabo Verde, the need to adopt optimization strategies becomes increasingly necessary. This study was conducted as an attempt to answer that need. Although this work is about objective evaluation of image quality, and in medical practice the evaluation is usually subjective (visual evaluation of images by radiographer / radiologist), studies reported a correlation between these two types of evaluation (objective and subjective) [5-7] which accredits for conducting such studies. The purpose of this study is to evaluate the effect of exposure parameters (kVp and mAs) when using additional Cooper (Cu) filtration in dose and image quality in a Computed Radiography system.

Value of a lower limb immobilization device for SPECT/CT image fusion optimization

The foot and the ankle are small structures commonly affected by disorders, and their complex anatomy represent significant diagnostic challenges. SPECT/CT Image fusion can provide missing anatomical and bone structure information to functional imaging, which is particularly useful to increase diagnosis certainty of bone pathology. However, due to SPECT acquisition duration, patient’s involuntary movements may lead to misalignment between SPECT and CT images. Patient motion can be reduced using a dedicated patient support. We aimed at designing an ankle and foot immobilizing device and measuring its efficacy at improving image fusion. Methods: We enrolled 20 patients undergoing distal lower-limb SPECT/CT of the ankle and the foot with and without a foot holder. The misalignment between SPECT and CT images was computed by manually measuring 14 fiducial markers chosen among anatomical landmarks also visible on bone scintigraphy. Analysis of variance was performed for statistical analysis. Results: The obtained absolute average difference without and with support was 5.1±5.2 mm (mean±SD) and 3.1±2.7 mm, respectively, which is significant (p<0.001). Conclusion: The introduction of the foot holder significantly decreases misalignment between SPECT and CT images, which may have clinical influence in the precise localization of foot and ankle pathology.

A CMOS micro power switched-capacitor DC-DC step-up converter for indoor light energy harvesting applications

This paper presents a micro power light energy harvesting system for indoor environments. Light energy is collected by amorphous silicon photovoltaic (a-Si:H PV) cells, processed by a switched capacitor (SC) voltage doubler circuit with maximum power point tracking (MPPT), and finally stored in a large capacitor. The MPPT fractional open circuit voltage (V-OC) technique is implemented by an asynchronous state machine (ASM) that creates and dynamically adjusts the clock frequency of the step-up SC circuit, matching the input impedance of the SC circuit to the maximum power point condition of the PV cells. The ASM has a separate local power supply to make it robust against load variations. In order to reduce the area occupied by the SC circuit, while maintaining an acceptable efficiency value, the SC circuit uses MOSFET capacitors with a charge sharing scheme for the bottom plate parasitic capacitors. The circuit occupies an area of 0.31 mm(2) in a 130 nm CMOS technology. The system was designed in order to work under realistic indoor light intensities. Experimental results show that the proposed system, using PV cells with an area of 14 cm(2), is capable of starting-up from a 0 V condition, with an irradiance of only 0.32 W/m(2). After starting-up, the system requires an irradiance of only 0.18 W/m(2) (18 mu W/cm(2)) to remain operating. The ASM circuit can operate correctly using a local power supply voltage of 453 mV, dissipating only 0.085 mu W. These values are, to the best of the authors' knowledge, the lowest reported in the literature. The maximum efficiency of the SC converter is 70.3 % for an input power of 48 mu W, which is comparable with reported values from circuits operating at similar power levels.

A Java expression evaluator for nonlinear programming

Finding the optimal value for a problem is usual in many areas of knowledge where in many cases it is needed to solve Nonlinear Optimization Problems. For some of those problems it is not possible to determine the expression for its objective function and/or its constraints, they are the result of experimental procedures, might be non-smooth, among other reasons. To solve such problems it was implemented an API contained methods to solve both constrained and unconstrained problems. This API was developed to be used either locally on the computer where the application is being executed or remotely on a server. To obtain the maximum flexibility both from the programmers’ and users’ points of view, problems can be defined as a Java class (because this API was developed in Java) or as a simple text input that is sent to the API. For this last one to be possible it was also implemented on the API an expression evaluator. One of the drawbacks of this expression evaluator is that it is slower than the Java native code. In this paper it is presented a solution that combines both options: the problem can be expressed at run-time as a string of chars that are converted to Java code, compiled and loaded dynamically. To wide the target audience of the API, this new expression evaluator is also compatible with the AMPL format.