Improving building technologies with a sustainable strategy

In recent years it has been noticed the progressive disappearance of vernacular sustainable building technologies all over the world mainly due to a strong urban rehabilitation process with modern technologies not compatible with ancient knowledge. Simultaneously new dwellings are needed all over the world and in this sense it was decided to study an ecological and cost-controlled building technology of monolithic walls that can combine the use of low carbon footprint materials, such as earth, fibres and lime using an invasive species: giant reed cane (Arundo Donax). This paper explains the development of this building technology through testing diverse prototypes.

Optimal design and operation of compact simulated moving bed processes for enantioseparations

Simulated moving bed (SMB) chromatography is attracting more and more attention since it is a powerful technique for complex separation tasks. Nowadays, more than 60% of preparative SMB units are installed in the pharmaceutical and in the food in- dustry [SDI, Preparative and Process Liquid Chromatography: The Future of Process Separations, International Strategic Directions, Los Angeles, USA, 2002. http://www. strategicdirections.com]. Chromatography is the method of choice in these ¯elds, be- cause often pharmaceuticals and ¯ne-chemicals have physico-chemical properties which di®er little from those of the by-products, and they may be thermally instable. In these cases, standard separation techniques as distillation and extraction are not applicable. The noteworthiness of preparative chromatography, particulary SMB process, as a sep- aration and puri¯cation process in the above mentioned industries has been increasing, due to its °exibility, energy e±ciency and higher product purity performance. Consequently, a new SMB paradigm is requested by the large number of potential small- scale applications of the SMB technology, which exploits the °exibility and versatility of the technology. In this new SMB paradigm, a number of possibilities for improving SMB performance through variation of parameters during a switching interval, are pushing the trend toward the use of units with smaller number of columns because less stationary phase is used and the setup is more economical. This is especially important for the phar- maceutical industry, where SMBs are seen as multipurpose units that can be applied to di®erent separations in all stages of the drug-development cycle. In order to reduce the experimental e®ort and accordingly the coast associated with the development of separation processes, simulation models are intensively used. One impor- tant aspect in this context refers to the determination of the adsorption isotherms in SMB chromatography, where separations are usually carried out under strongly nonlinear conditions in order to achieve higher productivities. The accurate determination of the competitive adsorption equilibrium of the enantiomeric species is thus of fundamental importance to allow computer-assisted optimization or process scale-up. Two major SMB operating problems are apparent at production scale: the assessment of product quality and the maintenance of long-term stable and controlled operation. Constraints regarding product purity, dictated by pharmaceutical and food regulatory organizations, have drastically increased the demand for product quality control. The strict imposed regulations are increasing the need for developing optically pure drugs.(...)

Effects of ocean acidification on the swimming ability, development and biochemical responses of sand smelt larvae

Ocean acidification, recognized as a major threat to marine ecosystems, has developed into one of the fastest growing fields of research in marine sciences. Several studies on fish larval stages point to abnormal behaviours, malformations and increased mortality rates as a result of exposure to increased levels of CO2. However, other studies fail to recognize any consequence, suggesting species-specific sensitivity to increased levels of CO2, highlighting the need of further research. In this study we investigated the effects of exposure to elevated pCO2 on behaviour, development, oxidative stress and energy metabolism of sand smelt larvae, Atherina presbyter. Larvae were caught at Arrábida Marine Park (Portugal) and exposed to different pCO2 levels (control: ~600μatm, pH=8.03; medium: ~1000μatm, pH=7.85; high: ~1800μatm, pH=7.64) up to 15days, after which critical swimming speed (Ucrit), morphometric traits and biochemical biomarkers were determined. Measured biomarkers were related with: 1) oxidative stress - superoxide dismutase and catalase enzyme activities, levels of lipid peroxidation and DNA damage, and levels of superoxide anion production; 2) energy metabolism - total carbohydrate levels, electron transport system activity, lactate dehydrogenase and isocitrate dehydrogenase enzyme activities. Swimming speed was not affected by treatment, but exposure to increasing levels of pCO2 leads to higher energetic costs and morphometric changes, with larger larvae in high pCO2 treatment and smaller larvae in medium pCO2 treatment. The efficient antioxidant response capacity and increase in energetic metabolism only registered at the medium pCO2 treatment may indicate that at higher pCO2 levels the capacity of larvae to restore their internal balance can be impaired. Our findings illustrate the need of using multiple approaches to explore the consequences of future pCO2 levels on organisms.

The role of individual ability and structural embeddedness on entrepreneurial success

In the present thesis I analyse the roles of individual ability and structural embeddedness on entrepreneurial success. The results retrieved from a matched employer-employee longitudinal data set show prior worker productivities and environmental embeddedness to have a persistent positive impact on the size and growth rates of new firms. What is more, embeddedness facilitates the impact of ability on start-up performance with outsiders of comparable abilities starting smaller and slower growing firms. Those in higher ability categories are more likely to transfer and also, albeit to a lesser extent, close their ventures, an effect attributed to the higher opportunity costs associated with the group. Firms managed by embedded agents enjoy longer longevities and have better chances of finding a new owner after the departure of the previous one. Finally, higher ability types show evidence of specialisation in serial entrepreneurship.

Can body traits, other than wings, reflect the flight ability of Triatominae bugs?

Abstract: INTRODUCTION : Insects of the subfamily Triatominae are vectors of Trypanosoma cruzi , the Chagas disease parasite, and their flying behavior has epidemiological importance. The flying capacity is strikingly different across and within Triatominae species, as well as between sexes or individuals. Many Triatoma infestans individuals have wings but no flying muscles. In other Triatominae species, no clear relationships were found between wing length and flying behavior. If wing presence or size is not reflective of the flying behavior, which other parts of the body could be considered as reliable markers of this important function? METHODS : The genus Mepraia has exceptional characteristics with invariably wingless females and wingless or winged males. We calculated the porous surface exposed to odorant molecules to estimate the olfactory capacity of Mepraia spinolai . The head shape and thorax size were estimated using the geometric morphometric approach and traditional morphometric techniques, respectively. RESULTS : Alary polymorphism in M. spinolai was significantly associated with consistent modification of the thorax size, head shape, and notable change in the estimated olfactory capacity. The macropterous individuals had a larger olfactory surface and thorax size and significantly different head shape compared to those of the micropterous individuals. CONCLUSIONS: We concluded that these structural changes could be associated with the flying potential of Triatominae. Thus, morphological attributes not found on wings could help determine the likely flying potential of the bugs.

Improving the early diagnostic of prostate cancer by multiple biomarker detection with new biosensing devices

Prostate cancer (PCa) is the most common form of cancer in men, in Europe (World Health Organization data). The most recent statistics, in Portuguese territory, confirm this scenario, which states that about 50% of Portuguese men may suffer from prostate cancer and 15% of these will die from this condition. Its early detection is therefore fundamental. This is currently being done by Prostate Specific Antigen (PSA) screening in urine but false positive and negative results are quite often obtained and many patients are sent to unnecessary biopsy procedures. This early detection protocol may be improved, by the development of point-of-care cancer detection devices, not only to PSA but also to other biomarkers recently identified. Thus, the present work aims to screen several biomarkers in cultured human prostate cell lines, serum and urine samples, developing low cost sensors based on new synthetic biomaterials. Biomarkers considered in this study are the following: prostate specific antigen (PSA), annexin A3 (ANXA3), microseminoprotein-beta (MSMB) and sarcosine (SAR). The biomarker recognition may occurs by means of molecularly imprinted polymers (MIP), which are a kind of plastic antibodies, and enzymatic approaches. The growth of a rigid polymer, chemically stable, using the biomarker as a template allows the synthesis of the plastic antibody. MIPs show high sensitivity/selectivity and present much longer stability and much lower price than natural antibodies. This nanostructured material was prepared on a carbon solid. The interaction between the biomarker and the sensing-material produces electrical signals generating quantitative or semi-quantitative data. These devices allow inexpensive and portable detection in point-of-care testing.

Improving silicon probe performance through layer-by-layer coating

Fully comprehending brain function, as the scale of neural networks, will only be possi-ble with the development of tools by micro and nanofabrication. Regarding specifically silicon microelectrodes arrays, a significant improvement in long-term performance of these implants is essential. This project aims to create a silicon microelectrode coating that provides high-quality electrical recordings, while limiting the inflammatory response of chronic implants. To this purpose, a combined chitosan and gold nanoparticles coating was produced allied with electrodes modification by electrodeposition with PEDOT/PSS in order to reduce the im-pedance at 1kHz. Using a dip-coating mechanism, the silicon probe was coated and then charac-terized both morphologically and electrochemically, with focus on the stability of post-surgery performance in anesthetized rodents. Since not only the inflammatory response analysis is vital, the electrodes recording degradation over time was also studied. The produced film presented a thickness of approximately 50 μm that led to an increase of impedance of less than 20 kΩ in average. On a 3 week chronic implant, the impedance in-crease on the coated probe was of 641 kΩ, compared with 2.4 MΩ obtained for the uncoated probe. The inflammatory response was also significantly reduced due to the biocompatible film as proved by histological tests.

Comparison of the fluorescent polarization (TDx) and the enzymatic competitive (EMIT 2000) immune assays for the measurement of cyclosporin A blood concentration

Evaluation of Cyclosporin A (CyA) blood concentration is imperative in solid organ transplantation in order to achieve maximal immunosuppression with the least side effects. We compared the results of whole blood concentrations of CyA in 50 blood samples simultaneously evaluated by the fluorescent polarization immune assay (TDx) and the enzymatic competitive immune assay (EMIT 2000). There was a strong correlation between both kits for any range of CyA blood concentration (R=0.99, p<0.001). The within-run and between-days coefficient of variation were less than 4% for both assays. The cost for each CyA measurement was 50% lower for the EMIT assay when compared to the TDx assay. We concluded that the EMIT is as accurate as the TDx in measuring CyA blood concentration and has the advantage of a lower cost, as well as the possibility of widespread access to the EMIT methodology in contrast to the TDx equipment, allowing the laboratory to perform several routines within a working day.

Bio-valorization of crude glycerol through polyhydroxyalkanoates production

Due to the prospective partial replacement of fossil fuels by biodiesel, its production has continuously grown in the last decade. The increase in global biodiesel production demands the development of sustainable applications of its main by-product, crude glycerol. In this thesis the feasibility of producing polyhydroxyalkanoates (PHA) by a mixed microbial community using crude glycerol as feedstock was investigated. Several incubation conditions were studied in order to maximize PHA production. The microbial population selected under aerobic dynamic feeding conditions had the ability to consume both major carbon fractions present in the crude, glycerol and methanol. Two biopolymers were stored, poly-3-hydroxybutyrate (PHB) and glucose biopolymer (GB), apparently using glycerol as the only carbon source for their production. The microbial enrichment obtained was able to accumulate up to 47% PHB of cell dry weight with a productivity of 0.24 g HA/L d. The overall PHA yield on total substrate consumed (0.32 g COD HB/g COD crude glycerol) was in the middle range of those reported in literature (0.08–0.58 g COD PHA/g COD real waste). The increase of temperature from 23ºC to 30ºC favored the culture fraction that accumulates glucose biopolymer with a maximum accumulation value of 25% of cell dry weight, which is an interesting value but not the main goal of this thesis. The fact that crude glycerol can be used to produce PHA without any pre-treatment step, makes the overall production process economically more competitive, reducing polymer final cost. This was the first study that demonstrates the valorization of the glycerol fraction present in the crude glycerol into PHA using an aerobic mixed microbial consortium.

Improving accuracy of inflation forecasts using macroeconomic information

This thesis examines the effects of macroeconomic factors on inflation level and volatility in the Euro Area to improve the accuracy of inflation forecasts with econometric modelling. Inflation aggregates for the EU as well as inflation levels of selected countries are analysed, and the difference between these inflation estimates and forecasts are documented. The research proposes alternative models depending on the focus and the scope of inflation forecasts. I find that models with a Generalized AutoRegressive Conditional Heteroskedasticity (GARCH) in mean process have better explanatory power for inflation variance compared to the regular GARCH models. The significant coefficients are different in EU countries in comparison to the aggregate EU-wide forecast of inflation. The presence of more pronounced GARCH components in certain countries with more stressed economies indicates that inflation volatility in these countries are likely to occur as a result of the stressed economy. In addition, other economies in the Euro Area are found to exhibit a relatively stable variance of inflation over time. Therefore, when analysing EU inflation one have to take into consideration the large differences on country level and focus on those one by one.

Improving practical reasoning and argumentation

This thesis justifies the need for and develops a new integrated model of practical reasoning and argumentation. After framing the work in terms of what is reasonable rather than what is rational (chapter 1), I apply the model for practical argumentation analysis and evaluation provided by Fairclough and Fairclough (2012) to a paradigm case of unreasonable individual practical argumentation provided by mass murderer Anders Behring Breivik (chapter 2). The application shows that by following the model, Breivik is relatively easily able to conclude that his reasoning to mass murder is reasonable – which is understood to be an unacceptable result. Causes for the model to allow such a conclusion are identified as conceptual confusions ingrained in the model, a tension in how values function within the model, and a lack of creativity from Breivik. Distinguishing between dialectical and dialogical, reasoning and argumentation, for individual and multiple participants, chapter 3 addresses these conceptual confusions and helps lay the foundation for the design of a new integrated model for practical reasoning and argumentation (chapter 4). After laying out the theoretical aspects of the new model, it is then used to re-test Breivik’s reasoning in light of a developed discussion regarding the motivation for the new place and role of moral considerations (chapter 5). The application of the new model shows ways that Breivik could have been able to conclude that his practical argumentation was unreasonable and is thus argued to have improved upon the Fairclough and Fairclough model. It is acknowledged, however, that since the model cannot guarantee a reasonable conclusion, improving the critical creative capacity of the individual using it is also of paramount importance (chapter 6). The thesis concludes by discussing the contemporary importance of improving practical reasoning and by pointing to areas for further research (chapter 7).

Improving retail banking staff incentive systems

This Work Project seeks to analyze the viability, utility and best way of implementing mechanisms of double accounting and of insertion of low (or null) sales objectives in an incentives program. The main findings are that both processes are possible and to a certain extent advisable, although in very specific ways and with some limitations. Double accounting processes are especially effective between different segments and networks and should have a greater impact in the first evaluation periods of each case and the null objectives, albeit usable, are recommended to be always substituted by positive objectives, even if quite small. Moreover, it is concluded that the formal structure of the incentives program influences significantly these concepts, namely concerning the duration of the evaluation periods and the interaction of the objectives of different entities for both the vertical (hierarchic) and horizontal (individual and collective) levels.

Sustained competitive advantage of different sized multinational corporations in rural base of the pyramid markets

This thesis explores how multinational corporations of different sizes create barriers to imitation and therefore sustain competitive advantage in rural and informal Base of the Pyramid economies. These markets require close cooperation with local partners in a dynamic environment that lacks imposable property rights and follows a different rationale than developed markets. In order to explore how competitive advantage is sustained by different sized multinational corporations at the Base of the Pyramid, the natural-resource-based view and the dynamic capabilities perspective are integrated. Based on this integration the natural-resource-based view is extended by identifying critical dynamic capabilities that are assumed to be sources of competitive advantage at the Base of the Pyramid. Further, a contrasting case study explores how the identified dynamic capabilities are protected and their competitive advantage is sustained by isolating mechanisms that create barriers to imitation for a small to medium sized and a large multinational corporation. The case study results give grounds to assume that most resource-based isolating mechanisms create barriers to imitation that are fairly high for large and established multinational corporations that operate at the rural Base of the Pyramid and have a high product and business model complexity. On the contrary, barriers to imitation were found to be lower for young and small to medium sized multinational corporations with low product and business model complexity that according to some authors represent the majority of rural Base of the Pyramid companies. Particularly for small to medium sized multinational corporations the case study finds a relationship- and transaction-based unwillingness of local partners to act opportunistically rather than a resource-based inability to imitate. By offering an explanation of sustained competitive advantage for small to medium sized multinational corporations at the rural Base of the Pyramid this thesis closes an important research gap and recommends to include institutional and transaction-based research perspectives.

Portuguese footwear

This case study deals with the reasons why the Portuguese Footwear Cluster evolved from a small industry focused on the Portuguese internal market into a high-tech industry capable of designing and producing some of the best and most expensive shoes in the world. It went from using the low labor costs of an under-developed economy to produce long series of shoes for pre-designated brands in Northern Europe to having the ability to produce some of the highest quality shoes in the world, in small orders, designed and delivered in record timing, while offering a service of excellence. In 1960, when Portugal became a founding member of EFTA, the footwear industry in Portugal was globally irrelevant, producing low quality shoes directed to the puny internal market and its African colonies. The new free trade zone with economies much more developed that itself, led to the transfer of the labor-intensive, low skilled manufacture from the UK and Scandinavian countries to Portugal. Mostly through joint ventures, the industry was able to mechanize itself so it could produce shoes in long series at low prices. It grew based on that model up until the 1990s, when the emergence of the Asian countries meant either a different strategy or extinction. Taking advantage of a clarified leadership of its trade association, it used the European funds made available to it during the 1990s, to modernize its factory floors, so it could become more nimble and flexible, expand its design capabilities and dramatically change its image abroad. The role of the trade association, APICCAPS, was instrumental throughout the process going well beyond what came to be expected of trade associations. It used its privileged position to provide understanding regarding the current situation and competitive landscape, alerting for changes ahead and at the same time providing a strategic vision on how to deal with the challenges. Moreover, it helped companies get the resources they needed by creating a research center in collaboration with a University, by creating a process that allowed companies to learn from each other via the show casing of projects sponsored by the association or by helping industrials traveling to locations where new customers could be found. The case study provides insight on how the trade association leadership, which has no formal authority over its members, was able to guide and motivate an industry through a consistent positive approach. That approach focused on the solutions, on the opportunities and on the success stories of companies in the cluster rather than on what was wrong or needed to be addressed. Based on this case, one could use the leadership role of the trade association to discuss and change leaders’ roles and styles in other sectors or even companies.