Resprouting and new leaves in mangrove forests, one year after Hurricane Wilma impacted the site, Shark River Slough

This material is based upon work supported by the National Science Foundation through the Florida Coastal Everglades Long-Term Ecological Research program under Cooperative Agreements #DBI-0620409 and #DEB-9910514. This image is made available for non-commercial or educational use only.

Mangrove forest canopy damaged by Hurricane Wilma, Shark River Slough

This material is based upon work supported by the National Science Foundation through the Florida Coastal Everglades Long-Term Ecological Research program under Cooperative Agreements #DBI-0620409 and #DEB-9910514. This image is made available for non-commercial or educational use only.

Boardwalk and mangrove forest canopy damaged by Hurricane Wilma, Shark River Slough

This material is based upon work supported by the National Science Foundation through the Florida Coastal Everglades Long-Term Ecological Research program under Cooperative Agreements #DBI-0620409 and #DEB-9910514. This image is made available for non-commercial or educational use only.

Jay Sah crossing tidal creek to measure tree damage by Hurricane Wilma, Harney River

This material is based upon work supported by the National Science Foundation through the Florida Coastal Everglades Long-Term Ecological Research program under Cooperative Agreements #DBI-0620409 and #DEB-9910514. This image is made available for non-commercial or educational use only.

Houseboats pushed out of the water by Hurricane Wilma, Flamingo

This material is based upon work supported by the National Science Foundation through the Florida Coastal Everglades Long-Term Ecological Research program under Cooperative Agreements #DBI-0620409 and #DEB-9910514. This image is made available for non-commercial or educational use only.

Nilesh Timilsina measuring tree height in a mangrove forest impacted by Hurricane Wilma, Harney River

This material is based upon work supported by the National Science Foundation through the Florida Coastal Everglades Long-Term Ecological Research program under Cooperative Agreements #DBI-0620409 and #DEB-9910514. This image is made available for non-commercial or educational use only.

Houseboats pushed out of the water by Hurricane Wilma, Flamingo

This material is based upon work supported by the National Science Foundation through the Florida Coastal Everglades Long-Term Ecological Research program under Cooperative Agreements #DBI-0620409 and #DEB-9910514. This image is made available for non-commercial or educational use only.

Design of Transparent Conducting Electrodes and Surface Relief Gratings for Plasmonic Polymer Solar Cells

As the concept of renewable energy becomes increasingly important in the modern society, a considerable amount of research has been conducted in the field of organic photovoltaics in recent years. Although organic solar cells generally have had lower efficiencies compared to silicon solar cells, they have the potential to be mass produced via solution processing. A common polymer solar cell architecture relies on the usage of P3HT (electron donor) and PCBM (electron acceptor) bulk heterojunction. One of the main issues with this configuration is that in order to compensate for the high exciton recombination rate, the photoactive layer is often made very thin (on the order of 100 $%). This results in low solar cell photocurrents due to low absorption. This thesis investigates a novel method of light trapping by coupling surface plasmons at the electrode interface via surface relief gratings, leading to EM field enhancements and increased photo absorption. Experimental work was first conducted on developing and optimizing a transparent electrode of the form &'()/+,/&'() to replace the traditional ITO electrode since the azopolymer gratings cannot withstand the high temperature processing of ITO films. It was determined that given the right thickness profiles and deposition conditions, the MAM stack can achieve transmittance and conductivity similar to ITO films. Experimental work was also conducted on the fabrication and characterization of surface relief gratings, as well as verification of the surface plasmon generation. Surface relief gratings were fabricated easily and accurately via laser interference lithography on photosensitive azopolymer films. Laser diffraction studies confirmed the grating pitch, which is dependent on the incident angle and wavelength of the writing beam. AFM experiments were conducted to determine the surface morphology of the gratings, before and after metallic film deposition. It was concluded that metallic film deposition does not significantly alter the grating morphologies.

Design of Transparent Conducting Electrodes and Surface Relief Gratings for Plasmonic Polymer Solar Cells

As the concept of renewable energy becomes increasingly important in the modern society, a considerable amount of research has been conducted in the field of organic photovoltaics in recent years. Although organic solar cells generally have had lower efficiencies compared to silicon solar cells, they have the potential to be mass produced via solution processing. A common polymer solar cell architecture relies on the usage of P3HT (electron donor) and PCBM (electron acceptor) bulk heterojunction. One of the main issues with this configuration is that in order to compensate for the high exciton recombination rate, the photoactive layer is often made very thin (on the order of 100 $%). This results in low solar cell photocurrents due to low absorption. This thesis investigates a novel method of light trapping by coupling surface plasmons at the electrode interface via surface relief gratings, leading to EM field enhancements and increased photo absorption. Experimental work was first conducted on developing and optimizing a transparent electrode of the form &'()/+,/&'() to replace the traditional ITO electrode since the azopolymer gratings cannot withstand the high temperature processing of ITO films. It was determined that given the right thickness profiles and deposition conditions, the MAM stack can achieve transmittance and conductivity similar to ITO films. Experimental work was also conducted on the fabrication and characterization of surface relief gratings, as well as verification of the surface plasmon generation. Surface relief gratings were fabricated easily and accurately via laser interference lithography on photosensitive azopolymer films. Laser diffraction studies confirmed the grating pitch, which is dependent on the incident angle and wavelength of the writing beam. AFM experiments were conducted to determine the surface morphology of the gratings, before and after metallic film deposition. It was concluded that metallic film deposition does not significantly alter the grating morphologies.

Surface wave and storm surge prediction during Hurricane Sandy

Hurricane Sandy was the largest storm on historical record in the Atlantic Ocean basin with extensive coastal damage caused by large waves and high storm surge. The primary objectives of this thesis are to compare and evaluate three different spatially-varying surface wind fields of Hurricane Sandy to investigate the impact of the differences between the complex wind fields on predictions of the sea surface evolution, and to evaluate the impact of the storm on the hydrodynamics in Great South Bay (GSB) and the discharge of ocean water into the back-barrier bay from overwash over Fire Island. Three different spatially-varying surface wind fields were evaluated and compared to wind observations, including the parametric Holland (1980) model (H80), the parametric Generalized Asymmetric Holland Model (GAHM), and results from the WeatherFlow Regional Atmospheric Modelling System (WRAMS). The winds were used to drive the coupled Delft3D-SWAN hydrodynamic and ocean wave models on a regional grid. The results indicate that the WRAMS wind field produces wave model predictions in the best agreement with significant wave height observations, followed by the GAHM and H80 wind fields and that a regional atmospheric wind model is best for hindcasting hurricane waves and water levels when detailed observations are available, while a parametric vortex model is best for forecasting hurricane sea surface conditions. Using a series of four connected Delft3D-SWAN grids to achieve finer resolution over Fire Island and GSB, a higher resolution WRAMS was used to predict waves and storm surge. The results indicate that strong local winds have the largest influence on water level fluctuations in GSB. Three numerical solutions were conducted with varying extents of barrier island overwash. The simulations allowing for minor and major overwash indicated good agreement with observations in the east end of GSB and suggest that island overwash provided a significant contribution of ocean water to GSB during the storm. Limiting the overwash in the numerical model directly impacts the total discharge into GSB from the ocean through existing inlets. The results of this study indicate that barrier island overwash had a significant impact on the water levels in eastern GSB.

Applicability of non-pharmacological strategies for pain relief in parturient: integrative review

MORAES, Maísa Suares Teixeira; ROLIM, Lariane Thays Albuquerque; ENDERS, Bertha Cruz; FARIAS, Glaucea Maciel de; DAVIM, Rejane Marie Barbosa. Applicability of non-pharmacological strategies for pain relief in parturient: integrative review. Revista de Enfermagem UFPE on line, v.4, n.especial, p.131-136, May/June 2010. Disponivel em:< http://www.ufpe.br/revistaenfermagem/index.php/revista/>.

Resilience and the cultural landscape : the case of the Lower Ninth Ward after Hurricane Katrina

Le but de cette recherche est d’évaluer l’importance du paysage culturel dans la résilience des communautés urbaines post-catastrophes. Ce travail se concentre sur le quartier du Lower Ninth Ward dans la ville de La Nouvelle-Orléans (États-Unis) après le passage de l’ouragan Katrina en 2005. Les catastrophes naturelles prennent une envergure et causent des dommages considérables lorsqu’elles touchent des villes. La reconstruction post -désastre est donc très dispendieuse pour les villes et les gouvernements, d’autant que certaines régions sont dévastées au point qu’elles doivent être reconstruites au complet. Cependant, le coût le plus lourd à assumer reste celui en vies humaines et si rebâtir les éléments concrets d’une ville est une tâche difficile à entreprendre, reconstruire une communauté est considérablement plus complexe. Dans le but de comprendre une telle démarche, cette recherche se concentre sur les éléments intangibles, comme l’attachement au lieu et les réseaux sociaux, dont une communauté a besoin pour se reconstituer de façon durable et résiliente. Le concept de résilience est très contesté dans la littérature et plusieurs chercheurs se sont essayés à le mesurer. Cette recherche adopte une perspective critique sur le concept et le revisite d’un point de vue holistique pour mettre en lumière sa complexité. Cette démarche permet de remettre en question l’importance de mesurer un concept finalement en perpétuelle redéfinition dans le temps et selon les échelles géographiques. De plus, en établissant une relation entre résilience et paysage culturel, il a été possible de mieux comprendre la complexité de la résilience. Touchant à plusieurs disciplines (architecture de paysage, urbanisme et sociologie), cette recherche utilise une méthodologie qui reflète son aspect multidisciplinaire : les méthodes mixtes. Ces dernières permettent la collecte de données quantitatives et qualitatives qui produisent une vue globale de la situation post-Katrina à travers le regroupement de recensions statistiques, d’observations de terrain et d’articles de journaux. Parallèlement, des entretiens ont été réalisés avec des résidents du quartier ainsi qu’avec des professionnels pour mieux comprendre les différents points de vue. Cette méthodologie a permis de produire des résultats au niveau du cas d’étude autant qu’au niveau théorique. La recherche valide l’importance de prendre en compte le paysage culturel dans les situations post-catastrophes, (en particulier) dans la mesure où il s’agit d’un élément souvent négligé par les urbanistes et les acteurs locaux. En effet, les éléments constitutifs du paysage culturel tels que l’attachement au lieu et les réseaux sociaux, participent d’un sentiment d'appartenance (« home ») et d’une volonté, pour les résidents, de reconstruire leurs habitations, leur communauté ainsi que leur quartier. Toutefois, il faut reconnaître que ces éléments ne suffisent pas à retrouver ce qu’ils ont perdu. Ainsi, l’étude du paysage culturel permet non seulement de mieux comprendre la complexité de la résilience, mais démontre également que cette dernière est une construction sociale.