Effectiveness of surface protection for resin-modified glass-ionomer materials

Objective: the purpose of this study was to evaluate the effectiveness of various surface treatments for resin-modified glass-ionomer restorative materials by determining dye uptake spectrophotometrically. Method and materials: Two hundred twenty-four specimens, 4.1 mm in diameter and 2.0 mm thick, were made of 3 materials: Vitremer, Fuji II LC, and Photac-Fil Aplicap. Specimens were divided into 15 groups. The positive and negative control specimens remained unprotected, while the experimental specimens were protected with Heliobond light-activated bonding resin, Colorama nail varnish, or surface coatings indicated by the manufacturers of the glass-ionomer materials. Finishing Gloss for Vitremer, Fuji Varnish for Fuji II LC, and Ketac Glaze for Photac-Fil. The disks were immersed in 0.05% methylene blue for 24 hours except for the negative control group, which was immersed in deionized water. After 24 hours, the disks were removed, washed, and individually placed in 1 mL of 65% nitric acid for 24 hours. The solutions were centrifuged and the spectrophotometric absorbance was determined at 606 nm. The dye uptake was expressed in micrograms of dye per milliliter, and the results were analyzed with the Kruskal-Wallis test. Results: There were no differences in dye uptake among the 3 resin-modified glass-ionomer restorative materials, however, all of them required surface protection. Conclusion: the best surface protection for the 3 evaluated materials was obtained with Heliobond light-activated bonding resin.

Evaluation of an electroless nickel interlayer on the fatigue & corrosion strength of chromium-plated AISI 4340 steel

Despite the fact that chromium electrodeposition results in protection against wear and corrosion, combined with chemical resistance and good lubricity, the reduction in fatigue strength of base metal and environmental requirements causes one to search for possible alternatives. To improve the fatigue and corrosion resistance of AISI 4340 steel, an experimental study has been made for an intermediate electroless nickel layer deposited on base metal. The objective of this study was to analyze the effect of nickel underplate on the fatigue and corrosion strength of hard-chromium-plated AISI 4340 steel. Deposition of the conventional wear-resistant hard chromium plating leads to a decrease in mechanical properties of the base metal, especially the fatigue strength. Rotating bending fatigue tests results indicate better performance for conventional hard chromium plating. Good corrosion resistance in salt fog exposure was obtained for the accelerated hard chromium plating. Experimental data showed higher fatigue and corrosion resistance for samples prepared with accelerated hard chromium plate over electroless nickel plate, when compared with samples without electroless nickel underplate.

Efeito dos níveis de energia da ração sobre o desempenho e teor de gordura na carcaça de frangos de corte

It was studied the effect of energy levels in the diet, obtained from vegetal oil inclusion, on the performance, diet cost per kilogram of broiler and fat content of the carcass, There were used 4,800 broiler chicks, 2,400 males and 2,400 females, and they were distributed in six treatment (energy levels in kcal ME/kg of diet) in three different phases: start diet from one to 20 days of age: A - 2930, B - 2980, C - 3030, D - 3080, E - 3130, F - 3180, growth diet from 21 to 40 days: A - 2980, B - 3030, C - 3050, D - 3130, E - 3150, F - 3230, finishing diet from 41 to 45 days of age: A - 3030, B - 3080, C - 3130,, D - 3180, E - 3230, F - 3280. The protein content was 22, 20 and 18% in each phase, respectively, There were evaluated the feed intake, energy intake, protein intake, weight gain, feed conversion mortality, diet cost per kg/bw. Sixty broilers were slaughtered, five males and five females per treatment, randomly chosen to determine the carcass composition considering the dry matter content, lipids content and protein content, total fat in carcass and fat per kilogram of broiler. The data were submitted to variance analysis and the means were compared using SNK. The broilers fed with medium and low levels of dietary energy showed the highest weight gain. At energy levels of the treatment D in the three phases, the lowest cost per kilogram of broiler was obtained. The females presented the highest fat content per kilogram of broiler produced.

Avaliação da vinhaça líquida em substituição à água na terminação de bovinos em confinamento. 1. Desempenho

During 90 days 243 finishing feedlot animals from two genetic groups, were weighed every 28 days in a randomized experimental procedure in a 2 x 3 factorial arrangement, with two breeds - Nelore (Nel) and Canchim (Can) - and three treatments: water (A), cane stillage + magnesium oxide (V) and cane stillage + magnesium oxide + sodium bicarbonate (V + B). The diet for all treatments was composed of 70% of corn silage and 30% of chopped sugar cane ad libitum plus 1 kg of ground corn and 1,5 kg of soluble yeast per animal. Results showed higher weight gain (P < 0,01) of the Can group relation to those of Nel, having respectively 1,35 and 1,22 kg/head/day. Both Can and Nel groups showed higher weight gain (P <.01) when fed with V + B, with 1,44 and 1,32 kg/head/day respectively when comparing to the other diets: Can (A) = 1,30; Can (V) = 1,31; Nel (A) = 1,16 and Nel (V) = 1,20 kg/head/day. The diet using V + B has also showed a tendency (.05

Efeito do tipo de dieta e do sistema de alimentação na fase inicial sobre o desempenho de leitões

In this experiment, 96 piglets (Large White x Landrace) were fed simple (SD) or semi-complex (SCD) diets during the initial phase (SP), using a controlled (C) or ad libitum (AL) schedules during the first 14 days of the SP and ad libitum for the rest of SP. By the end of SP one male and one female from each pen were transferred to growing finishing pens where they were fed ad libitum diets specific to each phase. The experimental design consisted of randomized complete blocks with six replicates by treatment. Higher average daily feed intakes (ADFI) were observed during the first 14 days of the SP by pigs fed SCD. Pigs fed AL showed higher ADFI and average daily gains (ADG). No treatment differences were observed between the treatments in feed conversion (FC) or in incidence and severity of diarrhea. Considering SP as a whole, there was no effect of treatments on the variables studied. Treatments used in SF did not affect ADFI and ADG during the growing-finishing phases (GFP), although pigs fed SD showed better FC. The ADG was nor affected by treatments when the total period (SP+GFP) was considered. It can be concluded that a similar performance was obtained when SD or SCD were feci during the initial phase. independently of the feeding system.

Níveis de cloreto de sódio em rações para frangos de corte

A trial was carried out using 1,000 day-old chicks to evaluate levels of NaCl (0.30, 0.45, 0.60, 0.75 and 0.90%) in diets. Water and feeding with 20.1 and 18.2% CP, 2, 900 and 2,950 kcal/kg ME respectively for initial and finishing phases were offered ad libitum. High levels of NaCl (0.60, 0.75 and 0.90%) increased the water intake and water:feed ratio during the first 21 days (P<0.05). Whitin the period of 21-42 days only water intake increased (P<0.05). Body weight, feed and water intake, mortality were higher (P<0.05)for males. High levels of NaCl (0.60, 0.75 and 0.90%) increased (P<0.05) body weight, water intake, water:feed ratio and moist litter during the trial. The supplementation of high levels of NaCl increased performance, bur implied in higher litter moisture.

Ceramic Primer Heat-Treatment Effect on Resin Cement/Y-TZP Bond Strength

The purpose of this study was to evaluate the effect of different heat-treatment strategies for a ceramic primer on the shear bond strength of a 10-methacryloyloxydecyl-dihydrogen-phosphate (MDP)-based resin cement to a yttrium-stabilized tetragonal zirconia polycrystal (Y-TZP) ceramic. Specimens measuring 4.5 x 3.5 x 4.5 mm(3) were produced from Y-TZP presintered cubes and embedded in polymethyl methacrylate (PMMA). Following finishing, the specimens were cleaned using an ultrasound device and distilled water and randomly divided into 10 experimental groups (n=14) according to the heat treatment of the ceramic primer and aging condition. The strategies used for the experimental groups were: GC (control), without primer; G20, primer application at ambient temperature (20 degrees C); G45, primer application + heat treatment at 45 degrees C; G79, primer application + heat treatment at 79 degrees C; and G100, primer application + heat treatment at 100 degrees C. The specimens from the aging groups were submitted to thermal cycling (6000 cycles, 5 degrees C/55 degrees C, 30 seconds per bath) after 24 hours. A cylinder of MDP-based resin cement (2.4 mm in diameter) was constructed on the ceramic surface of the specimens of each experimental group and stored for 24 hours at 37 degrees C. The specimens were submitted to a shear bond strength test (n=14). Thermal gravimetric analysis was performed on the ceramic primer. The data obtained were statistically analyzed by two-way analysis of variance and the Tukey test (alpha=0.05). The experimental group G79 without aging (7.23 +/- 2.87 MPa) presented a significantly higher mean than the other experimental groups without aging (GC: 2.81 +/- 1.5 MPa; G20: 3.38 +/- 2.21 MPa; G100: 3.96 +/- 1.57 MPa), showing no difference from G45 only (G45: 6 +/- 3.63 MPa). All specimens of the aging groups debonded during thermocycling and were considered to present zero bond strength for the statistical analyses. In conclusion, heat treatment of the metal/zirconia primer improved bond strength under the initial condition but did not promote stable bonding under the aging condition.

Dressing monitoring with a digital signal processor

Grinding is a finishing process in machining operations, and the topology of the grinding tool is responsible for producing the desired result on the surface of the machined material The tool topology is modeled in the dressing process and precision is therefore extremely important This study presents a solution in the monitoring of the dressing process, using a digital signal processor (DSP) operating in real time to detect the optimal dressing moment To confirm the monitoring efficiency by DSP, the results were compared with those of a data acquisition system (DAQ) and offline processing The method employed here consisted of analyzing the acoustic emission and electrical power signal by applying the DPO and DPKS parameters The analysis of the results allowed us to conclude that the application of the DPO and DPKS parameters can be substituted by processing of the mean acoustic emission signal, thus reducing the computational effort

Acid Black 48 dye biosorption using Saccharomyces cerevisiae immobilized with treated sugarcane bagasse

The textile industry consumes large quantities of water and chemicals, especially in dyeing and finishing processes. Textile dye adsorption can be accomplished with natural or synthetic compounds. Cell immobilization using biomaterials allows the reduction of toxicity and mechanical resistance and opens spaces within the matrix for cell growth. The use of natural materials, such as sugarcane bagasse, is promising due to the low costs involved. The aim of the present study was to evaluate the use of sugarcane bagasse treated with either polyethyleneimine (PEI), NaOH or distilled water in the cell immobilization of Saccharomyces cerevisiae for textile dye removal. Three different adsorption tests were conducted: treated sugarcane bagasse alone, free yeast cells and bagasse-immobilized yeast cells. Yeast immobilization was 31.34% with PEI-treated bagasse, 8.56% with distilled water and 22.54% with NaOH. PEI-treated bagasse exhibited the best removal rates of the dye at all pH values studied (2.50, 4.50 and 6.50). The best Acid Black 48 adsorption rates were obtained with use of free yeast cells. At pH 2.50, 1 mg of free yeast cells was able to remove 5488.49 g of the dye. The lowest adsorption capacity rates were obtained using treated bagasse alone. However, the use of bagasse-immobilized cells increased adsorption efficiency from 20 to 40%. The use of immobilized cells in textile dye removal is very attractive due to adsorbed dye precipitation, which eliminates the industrial need for centrifugation processes. Dye adsorption using only yeast cells or sugarcane bagasse requires separation methods.

Effects of milling condition on the surface integrity of hot forged steel

This paper presents a study on the influence of milling condition on workpiece surface integrity focusing on hardness and roughness. The experimental work was carried out on a CNC machining center considering roughing and finishing operations. A 25 mm diameter endmill with two cemented carbide inserts coated with TiN layer were used for end milling operation. Low carbon alloyed steel Cr-Mo forged at 1200 degrees C was used as workpiece on the tests. Two kinds of workpiece conditions were considered, i.e. cur cooled after hot forging and normalized at 950 degrees C for 2 h. The results showed that finishing operation was able to significantly decrease the roughness by at least 46% without changing the hardness. on the other hand, roughing operation caused an increase in hardness statistically significant by about 6%. The machined surface presented deformed regions within feed marks, which directly affected the roughness. Surface finish behavior seems to correlate to the chip ratio given the decrease of 25% for roughing condition, which damaged the chip formation. The material removal rate for finishing operation 41% greater than roughing condition demonstrated to be favorable to the heat dissipation and minimized the effect on material hardness.

CATHODIC BEHAVIOUR of ANODIZED TITANIUM IN SIMULATED PHYSIOLOGICAL CONDITIONS

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Genetic correlations between categorical morphological traits in Nelore cattle by applying Bayesian analysis under a threshold animal model

P>In this study, Bayesian analysis under a threshold animal model was used to estimate genetic correlations between morphological traits (body structure, finishing precocity and muscling) in Nelore cattle evaluated at weaning and yearling. Visual scores obtained from 7651 Nelore cattle at weaning and from 4155 animals at yearling, belonging to the Brazilian Nelore Program, were used. Genetic parameters for the morphological traits were estimated by two-trait Bayesian analysis under a threshold animal model. The genetic correlations between the morphological traits evaluated at two ages of the animal (weaning and yearling) were positive and high for body structure (0.91), finishing precocity (0.96) and muscling (0.94). These results indicate that the traits are mainly determined by the same set of genes of additive action and that direct selection at weaning will also result in genetic progress for the same traits at yearling. Thus, selection of the best genotypes during only one phase of life of the animal is suggested. However, genetic differences between morphological traits were better detected during the growth phase to yearling. Direct selection for body structure, finishing precocity and muscling at only one age, preferentially at yearling, is recommended as genetic differences between traits can be detected at this age.

Efeito do período de fornecimento de ração semi-complexa na fase inicial, sobre o ganho de peso compensatório nas fases de crescimento e terminação

One hundred and twenty crossbred pigs (Large White x Landrace) weaned at an average age of 28 days, were used. Pigs were alloted to five dietary treatments according to weight, sex and litter as follows: T1- Simple diet (SD) during whole Starter phase (SP) (28-63 days); T2- Semi-complex diet (SCD) for the first seven days followed by a SD during 28 days of SP; T3- SCD for the first 14 days followed by SD during 21 days of SP; T4- SCD for the first 21 days followed by SD during 14 days of SP; T5- SCD during the entire SP. A completely randomized block design was used with six replications. At the end of the SP one castrated male and one female, weighing closest to the average live weight of the group, were transferred to growing-finishing pens and fed growing-finishing diets ad libitum until they reached approximately 90kg live weight. Increasing the period of feeding the semi-complex diet resulted in a linear increase in average daily feed intake and average daily gain during the first 28 days of the initial phase. However, when the entire initial phase was considered there was a linear increase only in daily feed intake. There were no differences in incidence and severity of diarrhea in SP or in the performance of pigs during the growing-finishing phases. There were was no differences in average daily gain among diets from weaning to 90 kg body weight. It was concluded that the advantage of the semi-complex starter diet tended to disappear as age increased.

Influence of Dietary Lysine Levels and Arginine:Lysine Ratios on Performance of Broilers Exposed to Heat or Cold Stress during the Period of Three to Six Weeks of Age

Four trials of identical experimental design were conducted to determine the effects of temperature, dietary Lys level, and dietary Arg:Lys ratios on performance and carcass yield of male broilers. Birds of a commercial strain were grown from 21 to 42 d of age in wire-floored finishing batteries placed in environmental chambers. The chambers were programmed to provide either a constant thermoneutral temperature (21.1 C), a constant cold temperature (15.5 C), or a cycling hot diurnal temperature (25.5 to 33.3 C). Within each environment there was a factorial arrangement of three Lys levels (1.0, 1.1, and 1.2%) with four Arg:Lys ratios (1.1:1, 1.2:1, 1.3:1, and 1.4:1). Environmental temperature significantly influenced virtually every characteristic examined. Hot cyclic temperatures reduced weight gain, feed intake, and breast meat yield, and increased feed conversion, dressing percentage, leg quarter yield, and abdominal fat content. The cold environment promoted increased feed intake and mortality. Ascites and cardiomyopathy were the leading causes of death under cold exposure and thermoneutral conditions, whereas complications arising from heat exposure were the main cause of death under hot cyclic conditions. Levels of Lys affected leg quarter yield and abdominal fat content over all environments but increased breast meat yield only under cold conditions. Increasing Arg: Lys ratios improved feed conversion and dressing percentage and reduced abdominal fat content; it could not be determined whether these responses were consistent with Arg per se or were due to a nonspecific N response. As increasing Lys levels or Arg:Lys ratios did not improve weight gain, increase breast meat yield, or attenuate adverse effects due to heat or cold exposure, it is concluded that the levels of Lys and Arg suggested for 21 to 42 d by the NRC are adequate for birds of this age under the environmental conditions encountered.

Efeitos da restrição alimentar no desempenho de bovinos jovens confinados

The objective of the study was to evaluate compensatory weight gain in the performance of young bulls submitted to feed restriction, in the initial phase of confinement and to study the economic viability of the utilization of three protein sources. Sixty six crossbred bulls Simental-Nelore, eight months old and averaging 220 kg of weight were submitted to three feeding programs in the growth phase that lasted 84 days. The feeding programs were ad libitum, restriction + raw soybean grains and restriction + toasted soybean grains, with a restriction level of 25% on average. In the finishing phase, with a 61 day duration, animals fed with each of the three diets mentioned above received two types of supplementary diets: raw soybean grains and poultry litter. There were no differences between final weights of animals in finishing phase, but the bulls submitted to the restriction had more weight gain per day and better food conversion than ad libitum animals, for both raw soybean grains and poultry litter. The conclusion was that the feeding restriction and consequent compensatory weight gain, presented advantages for feeding efficiency, by decreasing maintenance requirements, although final cost had been equivalent to ad libitum animals.