Investigation of the lithium ion mobility in cyclic model compounds and their ion conducting properties

Efficient energy storage and conversion is playing a key role in overcoming the present and future challenges in energy supply. Batteries provide portable, electrochemical storage of green energy sources and potentially allow for a reduction of the dependence on fossil fuels, which is of great importance with respect to the issue of global warming. In view of both, energy density and energy drain, rechargeable lithium ion batteries outperform other present accumulator systems. However, despite great efforts over the last decades, the ideal electrolyte in terms of key characteristics such as capacity, cycle life, and most important reliable safety, has not yet been identified. rnrnSteps ahead in lithium ion battery technology require a fundamental understanding of lithium ion transport, salt association, and ion solvation within the electrolyte. Indeed, well-defined model compounds allow for systematic studies of molecular ion transport. Thus, in the present work, based on the concept of ‘immobilizing’ ion solvents, three main series with a cyclotriphosphazene (CTP), hexaphenylbenzene (HBP), and tetramethylcyclotetrasiloxane (TMS) scaffold were prepared. Lithium ion solvents, among others ethylene carbonate (EC), which has proven to fulfill together with pro-pylene carbonate safety and market concerns in commercial lithium ion batteries, were attached to the different cores via alkyl spacers of variable length.rnrnAll model compounds were fully characterized, pure and thermally stable up to at least 235 °C, covering the requested broad range of glass transition temperatures from -78.1 °C up to +6.2 °C. While the CTP models tend to rearrange at elevated temperatures over time, which questions the general stability of alkoxide related (poly)phosphazenes, both, the HPB and CTP based models show no evidence of core stacking. In particular the CTP derivatives represent good solvents for various lithium salts, exhibiting no significant differences in the ionic conductivity σ_dc and thus indicating comparable salt dissociation and rather independent motion of cations and ions.rnrnIn general, temperature-dependent bulk ionic conductivities investigated via impedance spectroscopy follow a William-Landel-Ferry (WLF) type behavior. Modifications of the alkyl spacer length were shown to influence ionic conductivities only in combination to changes in glass transition temperatures. Though the glass transition temperatures of the blends are low, their conductivities are only in the range of typical polymer electrolytes. The highest σ_dc obtained at ambient temperatures was 6.0 x 10-6 S•cm-1, strongly suggesting a rather tight coordination of the lithium ions to the solvating 2-oxo-1,3-dioxolane moieties, supported by the increased σ_dc values for the oligo(ethylene oxide) based analogues.rnrnFurther insights into the mechanism of lithium ion dynamics were derived from 7Li and 13C Solid- State NMR investigations. While localized ion motion was probed by i.e. 7Li spin-lattice relaxation measurements with apparent activation energies E_a of 20 to 40 kJ/mol, long-range macroscopic transport was monitored by Pulsed-Field Gradient (PFG) NMR, providing an E_a of 61 kJ/mol. The latter is in good agreement with the values determined from bulk conductivity data, indicating the major contribution of ion transport was only detected by PFG NMR. However, the μm-diffusion is rather slow, emphasizing the strong lithium coordination to the carbonyl oxygens, which hampers sufficient ion conductivities and suggests exploring ‘softer’ solvating moieties in future electrolytes.rn

Studio di transistor elettrochimici e loro applicazioni

In questa tesi, utilizzando le particolari proprietà del polimero conduttivo poli(3,4-etilenediossitiofene) drogato con polistirene sulfonato , o PEDOT:PSS, sono stati realizzati dei transistor elettrochimici organici (OECTs), in cui il gate e canale source-drain sono stati realizzati depositando su substrato di vetro film sottili di questo polimero. I dispositivi realizzati sono stati caratterizzati, per comprenderne meglio le funzionalità e le proprietà per possibili applicazioni future, in particolare come sensori di glucosio. Il PEDOT:PSS è uno dei materiali più studiati per applicazioni della bioelettronica in virtù della sua grande stabilità chimica e termica, della reversibilità del suo processo di drogaggio, della grande conducibilità e delle sue proprietà elettrochimiche, nonché della sua attività in un vasto range di pH. Vengono trattate nell’elaborato anche le tecniche di deposizione di questo polimero per la creazione di film sottili, necessari per le varie applicazioni nell’ambito della bioelettronica organica, la quale si propone di unire la biologia e l’elettronica in un mutuale scambio di informazioni e segnali. Questa interazione si sta verificando soprattutto nel campo sanitario, come si può evincere dagli esempi riportati nella trattazione. Si conclude la parte teorica con una descrizione degli OECTs: viene spiegata la loro struttura, la capacità di connettere conducibilità ionica ed elettronica e il loro funzionamento, inserendo anche un confronto con i FET (“Field Effect Transistor”), per agevolare la comprensione dei meccanismi presenti in questi strumenti. Per la parte sperimentale si presenta invece una descrizione dettagliata dei procedimenti, degli strumenti e degli accorgimenti usati nel fabbricare i transistor sui quali si è lavorato in laboratorio, riportando anche una piccola esposizione sulle principali misure effettuate: curve caratterische I–V, transcaratteristiche e misure di corrente nel tempo sono le principali acquisizioni fatte per studiare i dispositivi. E’ stata studiata la diversa risposta degli OECTs al variare della concentrazione di PBS in soluzione, mostrando un generale rallentamento dei processi e una diminuzione della capacità di modificare la corrente source-drain al calare della concentrazione. In seguito, è stato effettuato un confronto tra transistor appena fatti e gli stessi analizzati dopo un mese, osservando una riduzione della corrente e quindi della conducibilità, seppur senza una modifica qualitativa delle curve caratteristiche (che mantengono il loro andamento). Per quanto riguarda la possibilità di usare questi dispositivi come sensori di glucosio, si introduce uno studio preliminare sulla risposta di un transistor, il cui gate è stato funzionalizzato con ferrocene, alla presenza di glucosio e glucosio ossidasi, un enzima necessario al trasferimento di elettroni, nella soluzione elettrolitica, seppur con qualche difficoltà, per via della mancanza di informazioni sui parametri da utilizzare e il range in cui compiere le misure (tuttora oggetto di ricerca).

Modeling multiple state electrostatically formed nanowire transistors

The present thesis work proposes a new physical equivalent circuit model for a recently proposed semiconductor transistor, a 2-drain MSET (Multiple State Electrostatically Formed Nanowire Transistor). It presents a new software-based experimental setup that has been developed for carrying out numerical simulations on the device and on equivalent circuits. As of 2015, we have already approached the scaling limits of the ubiquitous CMOS technology that has been in the forefront of mainstream technological advancement, so many researchers are exploring different ideas in the realm of electrical devices for logical applications, among them MSET transistors. The idea that underlies MSETs is that a single multiple-terminal device could replace many traditional transistors. In particular a 2-drain MSET is akin to a silicon multiplexer, consisting in a Junction FET with independent gates, but with a split drain, so that a voltage-controlled conductive path can connect either of the drains to the source. The first chapter of this work presents the theory of classical JFETs and its common equivalent circuit models. The physical model and its derivation are presented, the current state of equivalent circuits for the JFET is discussed. A physical model of a JFET with two independent gates has been developed, deriving it from previous results, and is presented at the end of the chapter. A review of the characteristics of MSET device is shown in chapter 2. In this chapter, the proposed physical model and its formulation are presented. A listing for the SPICE model was attached as an appendix at the end of this document. Chapter 3 concerns the results of the numerical simulations on the device. At first the research for a suitable geometry is discussed and then comparisons between results from finite-elements simulations and equivalent circuit runs are made. Where points of challenging divergence were found between the two numerical results, the relevant physical processes are discussed. In the fourth chapter the experimental setup is discussed. The GUI-based environments that allow to explore the four-dimensional solution space and to analyze the physical variables inside the device are described. It is shown how this software project has been structured to overcome technical challenges in structuring multiple simulations in sequence, and to provide for a flexible platform for future research in the field.

Laboratory and field investigation of the performance of suction drains, a novel low-carbon technology for ground stabilization

Con riferimento alla realizzazione di tunnel per servizi interrati, l’incertezza che contraddistingue il quadro geologico, oltre che incidere sui costi, riveste un ruolo chiave nella progettazione preliminare. Sebbene un’approfondita caratterizzazione geotecnica e geologica del volume di terreno inerente l’opera di scavo sia generalmente parte integrante del progetto, non è comunque possibile eliminare del tutto tali incertezze per via dell’estensione del volume interessato oltre che per la disomogeneità che sempre contraddistingue il terreno. Generalmente, investigazioni in corso d’opera e interventi di stabilizzazione devono essere previsti per contenere i costi di perforazione ed ottimizzare la progettazione. Ad esempio, tra i metodi di esplorazione geotecnica figurano i tunnel pilota, i quali sono in grado di garantire un’ottimale caratterizzazione del quadro geotecnico del sottosuolo. Con riferimento agli interventi di stabilizzazione del terreno, adottabili laddove una perforazione tradizionale non consentirebbe il tunnelling, vi è un vasta gamma di scelta. Pertanto, da una prima analisi delle problematiche connesse al tunnelling emerge che la stabilizzazione delle facce di scavo riveste un’importanza e un risconto applicativo di prim’ordine. Questa tesi si inserisce all’interno di un progetto che promuove un’innovativa ed economica tecnica di stabilizzazione dei tunnel per suzione tenendo quindi conto dell’influenza della suzione sulla coesione non drenata.

Transistor elettrochimici organici per biosensoristica

I transistor elettrochimici a base organica (OECT) hanno attratto sempre maggior interesse e sono oggetto di molti studi dagli anni '70 no ai nostri giorni. Questo lavoro di tesi ha come oggetto la realizzazione e la caratterizzazione di OECT a base di poli(3,4-etilen-diossi-tiofene) complessato con l'acido stirensolfonico (PSS). Questi dispositivi sono stati costruiti utilizzando solamente semiconduttori organici come materiali conduttivi ovvero senza l'uso di metalli, quindi risultano essere biocompatibili, economici e di semplice realizzazione. Questo tipo di sensori presenta un elevata sensibilità agli analiti e necessita di un'elettronica di controllo molto più semplice rispetto a metodi elettrochimici tradizionali che utilizzano un potenziostato ed un elettrodo di riferimento. Sono state studiate diverse geometrie e spessori di polimero depositato per ottimizzare le condizioni di lavoro per avere alta sensibilità e guadagno in corrente attraverso l'uso di misure di corrente di drain in funzione del tempo con aggiunte successive di analita. Questi dispositivi sono stati utilizzati come sensori di analiti quali la dopamina, l'acido ascorbico e l'acido urico. Attraverso scansioni in transcaratteristica, si è studiata la risposta dei transistor relativa agli analiti ed attraverso lo studio della transconduttanza si è ottenuta una nuova metodologia di lavoro in grado di separare i contributi relativi ai vari composti. Inoltre, in questa modalità, è stato possibile ottenere una selettività dei sensori ai vari analiti, problema principale dell'utilizzo di transistor elettrochimici, ed attraverso la modulazione della velocità di scansione dello strumento, è stata ottenuta una risposta alla sola dopamina, analita di maggior interesse per applicazioni biosensoristiche. In conclusione si può affermare che questo tipo di dispositivo possiede ottime proprietà e caratteristiche per ulteriori studi e sviluppi in applicazioni reali.

Talents in Migration Processes in the Conditions of the Czech Republic of the Nineties

The transformation of the 1990s has had a bearing on the academic and scientific world, as is becoming increasingly obvious with the changing numbers of foreign students wishing to study in the Czech Republic and of Czech students wishing to study abroad, the virtual collapse of doctoral studies, and the rapidly increasing age of Czech academics (placed at 48 by official sources and at rather more by this research). At the same time there is an apparent lack of interest in analysing and understanding these trends, which Mr. Cermak terms an ostrich policy, although his research showed that academics are in fact both aware and concerned about them. The mid-1990s migration of talent to and from R+D in the Czech Republic is also reflected in the number of talented Czech students studying abroad, who represent the largest and most interesting group of actual and potential migrants. Mr. Cermak's study took the form of a Delphi enquiry participated in by 44 specialists, including experts in the problems of higher education and science policy from the Presidium of the Higher Education Council (n = 23), members of the Council's Science and Research Commission (n = 14), former and current managers of higher education authorities (n = 4) and selected participants of the longitudinal talent research (n = 3). Questions considered included the influence of continuing talent migration from domestic R+D on the efficiency of domestic higher education, the diversification of forms of the brain drain and their impact on other processes in society, the possibility of positive influence on the brain drain processes to minimise the risks it presents, and the use of the knowledge obtained about the brain drain. The study revealed a clear drop of interest in brain drain problems in higher education in the mid-1990s, which is probably related to the collapsed of Czech R+D in the field of talent education. The effects on this segment of the labour market appeared earlier, with a major migration wave in 1991-1993 which significantly "cleared" the area of scientific talent. In addition, prospective talents from the ranks of younger students have not been integrated into domestic R+D, leading to the increasing average age of those working in this field. "Talent scouting" tended to be oriented towards much younger individuals, even in some cases towards undergraduate students. The R+D institutions deprived of human resources considered as basic in a functional R+D system have lost much of their dynamism and so no longer attract not only domestic talent but also talent from other regions. As a result the public, including the mass media and political structures, have stopped regarding the support of domestic science as a priority. This is clear both among the young people who are important for the future development of R+D (support for the education of talented children has dropped), from the drop in the prestige of this area as a profession among university students, and from the lack of explicit support for R+D by any of the political parties. On the basis of his findings Mr. Cermak concludes that there is no basis for the belief that the brain drain will represent a positive force in stimulating the development of the open society. Migration data shows that the outflow of talent from the Czech Republic far exceeds the inflow, and that the latter is largely short-term. Not only has the number of returning Czech professors dropped to half of its level at the beginning of the 1990s, but they also tend to take up only short-term contracts and retain their foreign positions. Recruitment of scientific talent from other countries, including the Slovak Republic, is limited. Furthermore internal contacts between those already involved in R+D have been badly hit by economic pressures and institutional co-operation has dropped to a minimum. There have been few moves to counteract this situation, the only notable one being the Program 250, launched in 1996 with government support to try and attract younger (i.e. under 40) talent into R+D. Its resources are however limited and its effects have not so far been evaluated. The deficit of academic and scientific talent in the Czech Republic is increasing and two major directions of academic work are emerging. Classic higher education science based on the teaching process is declining, largely due to economic factors, while there is an increasing emphasis on special; ad hoc projects which cannot be related directly to teaching but are often interesting to specialists outside the Czech Republic. This is shown clearly by the increase in publishing and in participation in domestic and foreign grant projects, which often serve to supplement the otherwise low salaries in the higher education sector. This tend was also accelerated by the collapse of applied R+D in individual sectors of the national economy and by substantial cutbacks in the Czech Academy of Sciences, which formerly fostered such research. Some part of the output of this research can be used in the education system and its financial contribution does significantly affect the stability of the present staff, but Mr. Cermak sees it as generally unfavourable for the development of talent education. In addition, it has led to a certain resignation on the question of integration into international structures, due to the emphasis on short-term targets, commercial advantages and individualism rather than team work. At the same time, he admits that these developments reflect those in other areas of the transformation in the Czech Republic.

Roux-en-Y drainage of the pancreatic stump decreases pancreatic fistula after distal pancreatic resection

Clinically relevant fistula after distal pancreatic resection occurs in 5-30% of patients, prolonging recovery and considerably increasing in-hospital stay and costs. We tested whether routine drainage of the pancreatic stump into a Roux-en-Y limb after distal pancreatic resection decreased the incidence of fistula. From October 2001, data of all patients undergoing pancreatic distal resection were entered in a prospective database. From June 2003 after resection, the main pancreatic duct and the pancreatic stump were oversewn, and in addition, anastomosed into a jejunal Roux-en-Y limb by a single-layer suture (n = 23). A drain was placed near the anastomosis, and all patients received octreotide for 5-7 days postoperatively. The volume of the drained fluid was registered daily, and concentration of amylase was measured and recorded every other day. Patient demographics, hospital stay, pancreatic fistula incidence (> or =30 ml amylase-rich fluid/day on/after postoperative day 10), perioperative morbidity, and follow-up after discharge were compared with our initial series of patients (treated October 2001-May 2003) who underwent oversewing only (n = 20). Indications, patient demographics, blood loss, and tolerance of an oral diet were similar. There were four (20%) pancreatic fistulas in the "oversewn" group and none in the anastomosis group (p < 0.05). Nonsurgical morbidity, in-hospital stay, and follow-up were comparable in both groups.

Routine procedures in NICUs: factors influencing pain assessment and ranking by pain intensity

BACKGROUND: Pain associated with routine procedures in NICUs is often inadequately managed. Barriers to more appropriate pain management are nurses' and physicians' knowledge and the challenges of collaborative decision-making. Few studies describe the differing perceptions of procedural pain intensity among nurses and physicians in NICUs which could complicate common decision-making. This study set out to explore the factors influencing pain intensity assessment and to gain insight into a possible pain intensity classification of routine procedures in the NICU. METHOD: A survey was conducted among 431 neonatal health care professionals from 4 tertiary level NICUs. Each routine procedure was assessed on a 10-point visual analogue scale (VAS) assuming absence of analgesia. RESULTS: Multiple ANCOVA models showed that nurses rated 19 of the 27 procedures as significantly more painful than did physicians (p<0.05). We found no differences in pain assessment based on professional experience, gender or age. Of the 27 procedures listed, 70% were rated as painful and 44% were judged very painful. Ranking and classification of the pain intensity of routine procedures were drawn up. The general ranking of the median across all procedures shows that "insertion of a thoracic drain" is assessed as the most painful procedure. CONCLUSIONS: The majority of routine procedures in an NICU are considered to be painful. Nurses generally rate procedures as more painful than do physicians. This difference in assessment deserves exploration in regard to its impact on collaborative decision-making in neonate pain management.

Hydrologic analysis of a limestone quarry using EPA's HELP Version 3.08 Model

Aggregates were historically a low cost commodity but with communities and governmental agencies reducing the amount of mining the cost is increasing dramatically. An awareness needs to be brought to communities that aggregate production is necessary for ensuring the existing infrastructure in today’s world. This can be accomplished using proven technologies in other areas and applying them to show how viable reclamation is feasible. A proposed mine reclamation, Douglas Township quarry (DTQ), in Dakota Township, MN was evaluated using Visual Hydrologic Evaluation of Landfill Performance (HELP) model. The HELP is commonly employed for estimating the water budget of a landfill, however, it was applied to determine the water budget of the DTQ following mining. Using an environmental impact statement as the case study, modeling predictions indicated the DTQ will adequately drain the water being put into the system. The height of the groundwater table will rise slightly due to the mining excavations but no ponding will occur. The application of HELP model determined the water budget of the DTQ and can be used as a viable option for mining companies to demonstrate how land can be reclaimed following mining operations.

Development of room temperature operating single electron transistor using FIB etching and deposition technology

The single-electron transistor (SET) is one of the best candidates for future nano electronic circuits because of its ultralow power consumption, small size and unique functionality. SET devices operate on the principle of Coulomb blockade, which is more prominent at dimensions of a few nano meters. Typically, the SET device consists of two capacitively coupled ultra-small tunnel junctions with a nano island between them. In order to observe the Coulomb blockade effects in a SET device the charging energy of the device has to be greater that the thermal energy. This condition limits the operation of most of the existing SET devices to cryogenic temperatures. Room temperature operation of SET devices requires sub-10nm nano-islands due to the inverse dependence of charging energy on the radius of the conducting nano-island. Fabrication of sub-10nm structures using lithography processes is still a technological challenge. In the present investigation, Focused Ion Beam based etch and deposition technology is used to fabricate single electron transistors devices operating at room temperature. The SET device incorporates an array of tungsten nano-islands with an average diameter of 8nm. The fabricated devices are characterized at room temperature and clear Coulomb blockade and Coulomb oscillations are observed. An improvement in the resolution limitation of the FIB etching process is demonstrated by optimizing the thickness of the active layer. SET devices with structural and topological variation are developed to explore their impact on the behavior of the device. The threshold voltage of the device was minimized to ~500mV by minimizing the source-drain gap of the device to 17nm. Vertical source and drain terminals are fabricated to realize single-dot based SET device. A unique process flow is developed to fabricate Si dot based SET devices for better gate controllability in the device characteristic. The device vi parameters of the fabricated devices are extracted by using a conductance model. Finally, characteristic of these devices are validated with the simulated data from theoretical modeling.

STOCHASTIC CHARGE TRANSPORT IN MULTI-ISLAND SINGLE-ELECTRON TUNNELING DEVICES

The physics of the operation of singe-electron tunneling devices (SEDs) and singe-electron tunneling transistors (SETs), especially of those with multiple nanometer-sized islands, has remained poorly understood in spite of some intensive experimental and theoretical research. This computational study examines the current-voltage (IV) characteristics of multi-island single-electron devices using a newly developed multi-island transport simulator (MITS) that is based on semi-classical tunneling theory and kinetic Monte Carlo simulation. The dependence of device characteristics on physical device parameters is explored, and the physical mechanisms that lead to the Coulomb blockade (CB) and Coulomb staircase (CS) characteristics are proposed. Simulations using MITS demonstrate that the overall IV characteristics in a device with a random distribution of islands are a result of a complex interplay among those factors that affect the tunneling rates that are fixed a priori (e.g. island sizes, island separations, temperature, gate bias, etc.), and the evolving charge state of the system, which changes as the source-drain bias (VSD) is changed. With increasing VSD, a multi-island device has to overcome multiple discrete energy barriers (up-steps) before it reaches the threshold voltage (Vth). Beyond Vth, current flow is rate-limited by slow junctions, which leads to the CS structures in the IV characteristic. Each step in the CS is characterized by a unique distribution of island charges with an associated distribution of tunneling probabilities. MITS simulation studies done on one-dimensional (1D) disordered chains show that longer chains are better suited for switching applications as Vth increases with increasing chain length. They are also able to retain CS structures at higher temperatures better than shorter chains. In sufficiently disordered 2D systems, we demonstrate that there may exist a dominant conducting path (DCP) for conduction, which makes the 2D device behave as a quasi-1D device. The existence of a DCP is sensitive to the device structure, but is robust with respect to changes in temperature, gate bias, and VSD. A side gate in 1D and 2D systems can effectively control Vth. We argue that devices with smaller island sizes and narrower junctions may be better suited for practical applications, especially at room temperature.

General Geology and Mines of Northwestern Montana

The five counties discussed in this paper compose the northernmost and westernmost counties in Montana. On the eastern boundary are Glacier National Park and the Continental Divide; on the southern boundary are Missoula and Powell counties; Idaho lies on the southwestern and western side; and the Canadian border lies along the northern edge. The region is on the Pacific Ocean side of the Rocky Mountains. Three major rivers, the Clark Fork, the Flathead, and the Kootenai drain this area into the Columbia River.

Delayed development of pneumothorax after pulmonary radiofrequency ablation

Acute pneumothorax is a frequent complication after percutaneous pulmonary radiofrequency (RF) ablation. In this study we present three cases showing delayed development of pneumothorax after pulmonary RF ablation in 34 patients. Our purpose is to draw attention to this delayed complication and to propose a possible approach to avoid this major complication. These three cases occurred subsequent to 44 CT-guided pulmonary RF ablation procedures (6.8%) using either internally cooled or multitined expandable RF electrodes. In two patients, the pneumothorax, being initially absent at the end of the intervention, developed without symptoms. One of these patients required chest drain placement 32 h after RF ablation, and in the second patient therapy remained conservative. In the third patient, a slight pneumothorax at the end of the intervention gradually increased and led into tension pneumothorax 5 days after ablation procedure. Underlying bronchopleural fistula along the coagulated former electrode track was diagnosed in two patients. In conclusion, delayed development of pneumothorax after pulmonary RF ablation can occur and is probably due to underlying bronchopleural fistula, potentially leading to tension pneumothorax. Patients and interventionalists should be prepared for delayed onset of this complication, and extensive track ablation following pulmonary RF ablation should be avoided.

Prediction of total quarter milk somatic cell counts based on foremilk sampling

Determination of somatic cell count (SCC) is used worldwide in dairy practice to describe the hygienic status of the milk and the udder health of cows. When SCC is tested on a quarter level to detect single quarters with high SCC levels of cows for practical reasons, mostly foremilk samples after prestimulation (i.e. cleaning of the udder) are used. However, SCC is usually different in different milk fractions. Therefore, the goal of this study was the investigation of the use of foremilk samples for the estimation of total quarter SCC. A total of 378 milkings in 19 dairy cows were performed with a special milking device to drain quarter milk separately. Foremilk samples were taken after udder stimulation and before cluster attachment. SCC was measured in foremilk samples and in total quarter milk. Total quarter milk SCC could not be predicted precisely from foremilk SCC measurements. At relatively high foremilk SCC levels (>300 x 10(3) cells/ml) foremilk SCC were higher than total quarter milk. At around (50-300) x 10(3) cells/ml foremilk and total quarter SCC did not differ considerably. Most interestingly, if foremilk SCC was lower than 50 x 10(3) cells/ml the total quarter SCC was higher than foremilk SCC. In addition, individual cows showed dramatic variations in foremilk SCC that were not very well related to total quarter milk SCC. In conclusion, foremilk samples are useful to detect high quarter milk SCC to recognize possibly infected quarters, only if precise cell counts are not required. However, foremilk samples can be deceptive if very low cell numbers are to be detected.

Septic peritonitis from pyloric and non-pyloric gastrointestinal perforation: prognostic factors in 44 dogs and 11 cats

OBJECTIVES To identify potential prognostic factors affecting outcome in septic peritonitis caused by gastrointestinal perforation in dogs and cats. METHODS A retrospective study. Animals operated on for septic peritonitis because of gastrointestinal perforation were evaluated. Risk factors assessed included age, duration of clinical signs, recent prior abdominal surgery, recent prior anti-inflammatory drug administration, placement of a closed-suction drain and location of perforation. RESULTS Fifty-five animals (44 dogs and 11 cats) were included. The overall mortality was 63·6%. No association was found between age, duration of clinical signs or prior abdominal surgery and outcome. Animals with a history of prior anti-inflammatory drugs were significantly (P=0·0011) more likely to have perforation of the pylorus (73·3%). No significant difference in outcome was found between animals treated with closed-suction drains and those treated with primary closure or between pyloric perforation and perforation at other gastrointestinal sites. CLINICAL SIGNIFICANCE Administration of anti-inflammatory drugs in dogs and cats is a significant risk factor for pyloric perforation. Pyloric perforation was not associated with a poorer outcome than perforation at other gastrointestinal sites. Placement of a closed suction drain did not improve outcome compared to primary closure.