THE DISPERSION AND SELECTIVE FLOCCULATION OF HEMATITE ORE

Iron ore is one of the most important ores in the world. Over the past century, most mining of iron ore has been focused on magnetite (Fe3O4). As the name suggests, magnetite is magnetic in nature and is easily separated from gangue (unwanted) minerals through magnetic separation processes. Unfortunately, the magnetite ore bodies are diminishing. Because of this, there has been a recent drive to pursue technology that can economically separate hematite (Fe2O3) from its gangue minerals as hematite is a much more abundant source of iron. Most hematite ore has a very small liberation size that is frequently less than 25μm. Beneficiation of any ore with this fine of a liberation size requires advanced processing methods and is seldom pursued. A single process, known as selective flocculation and dispersion, has been successfully implemented at a plant scale for the beneficiation of fine liberation size hematite ore. Very little is known about this process as it was discovered by the U.S. Bureau of Mines by accident. The process is driven by water chemistry and surface chemistry modifications that enhance the separation of the hematite from its gangue minerals. This dissertation focuses on the role of water chemistry and process reagents in this hematite beneficiation process. It has been shown that certain ions, including calcium and magnesium, play a significant role in the process. These ions have a significant effect on the surface chemistry as reported by zeta potential studies. It was shown that magnesium ions within the process water have a more significant impact on surface chemistry than calcium ions due to steric hindrance effects at the hematite surface. It has also been shown that polyacrylic acid dispersants, if used in the process, can increase product quality (increase iron content, decrease phosphorus content, decrease silica content) substantially. Water, surface and reagent chemistry experiments were performed at a laboratory, pilot, and full plant scale during the course of this work. Many of the conclusions developed in the laboratory and pilot scale were found to be true at the full plant scale as well. These studies are the first published in history to develop theories of water chemistry and surface chemistry interactions at a full plant scale.

Indocyanine Green Loaded Biocompatible Nanoparticles: Stabilisation of Indocyanine Green (ICG) Using Biocompatible Silica-Poly (&epsilon-Caprolactone) Grafted Nanocomposites

Indocyanine green (ICG) is a chemically labile compound which needs to be stabilized in aqueous media to be used in biomedical applications. In the present study, poly(ε-caprolactone) (PCL), a semi-crystalline polyester, was used to encapsulate and stabilize ICG in a hydrophobic environment. A hydrophobic and biocompatible nanocomposite was obtained by the process of encapsulating inorganic silica. ICG was embedded in the hydrophobic polymer coating by starting from a well-defined silica (Si) core of either 80 nm or 120 nm diameter, which served as a template for a ‘grafting from’ approach using ε-caprolactone. The obtained nanocomposite Si grafted PCL/ICG was based on silica nanoparticles grafted with PCL, in which ICG was adsorbed. The nanoparticles were characterized by IR spectroscopy, thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The change in the surface charge and the colloidal stability of the nanoparticles was followed by zeta potential measurements. This approach of synthesizing nanocomposite-based ICG demonstrates a new route to stabilize ICG. We synthesized biocompatible nanoparticles containing a high ICG concentration and exhibiting excellent stability to aqueous decomposition.

Fluorescence-encoded gold nanoparticles: library design and modulation of cellular uptake into dendritic cells.

In order to harness the unique properties of nanoparticles for novel clinical applications and to modulate their uptake into specific immune cells we designed a new library of homo- and hetero-functional fluorescence-encoded gold nanoparticles (Au-NPs) using different poly(vinyl alcohol) and poly(ethylene glycol)-based polymers for particle coating and stabilization. The encoded particles were fully characterized by UV-Vis and fluorescence spectroscopy, zeta potential and dynamic light scattering. The uptake by human monocyte derived dendritic cells in vitro was studied by confocal laser scanning microscopy and quantified by fluorescence-activated cell sorting and inductively coupled plasma atomic emission spectroscopy. We show how the chemical modification of particle surfaces, for instance by attaching fluorescent dyes, can conceal fundamental particle properties and modulate cellular uptake. In order to mask the influence of fluorescent dyes on cellular uptake while still exploiting its fluorescence for detection, we have created hetero-functionalized Au-NPs, which again show typical particle dependent cellular interactions. Our study clearly prove that the thorough characterization of nanoparticles at each modification step in the engineering process is absolutely essential and that it can be necessary to make substantial adjustments of the particles in order to obtain reliable cellular uptake data, which truly reflects particle properties.

Whole genome RNAi screens reveal a critical role of REV3 in coping with replication stress

REV3, the catalytic subunit of translesion polymerase zeta (polζ), is commonly associated with DNA damage bypass and repair. Despite sharing accessory subunits with replicative polymerase δ, very little is known about the role of polζ in DNA replication. We previously demonstrated that inhibition of REV3 expression induces persistent DNA damage and growth arrest in cancer cells. To reveal determinants of this sensitivity and obtain insights into the cellular function of REV3, we performed whole human genome RNAi library screens aimed at identification of synthetic lethal interactions with REV3 in A549 lung cancer cells. The top confirmed hit was RRM1, the large subunit of ribonucleotide reductase (RNR), a critical enzyme of de novo nucleotide synthesis. Treatment with the RNR-inhibitor hydroxyurea (HU) synergistically increased the fraction of REV3-deficient cells containing single stranded DNA (ssDNA) as indicated by an increase in replication protein A (RPA). However, this increase was not accompanied by accumulation of the DNA damage marker γH2AX suggesting a role of REV3 in counteracting HU-induced replication stress (RS). Consistent with a role of REV3 in DNA replication, increased RPA staining was confined to HU-treated S-phase cells. Additionally, we found genes related to RS to be significantly enriched among the top hits of the synthetic sickness/lethality (SSL) screen further corroborating the importance of REV3 for DNA replication under conditions of RS.

Accurate computations of the structures and binding energies of the imidazole ... benzene and pyrrole ... benzene complexes

Using explicitly-correlated coupled-cluster theory with single and double excitations, the intermolecular distances and interaction energies of the T-shaped imidazole⋯⋯benzene and pyrrole⋯⋯benzene complexes have been computed in a large augmented correlation-consistent quadruple-zeta basis set, adding also corrections for connected triple excitations and remaining basis-set-superposition errors. The results of these computations are used to assess other methods such as Møller–Plesset perturbation theory (MP2), spin-component-scaled MP2 theory, dispersion-weighted MP2 theory, interference-corrected explicitly-correlated MP2 theory, dispersion-corrected double-hybrid density-functional theory (DFT), DFT-based symmetry-adapted perturbation theory, the random-phase approximation, explicitly-correlated ring-coupled-cluster-doubles theory, and double-hybrid DFT with a correlation energy computed in the random-phase approximation.

Self-assembly into nanoparticles is essential for receptor mediated uptake of therapeutic antisense oligonucleotides

Antisense oligonucleotides (ASOs) have the potential of revolutionizing medicine due to their ability to manipulate gene function for therapeutic purposes. ASOs are chemically modified and/or incorporated with nanoparticles to enhance their stability and cellular uptake; however, one of the biggest challenges is the poor understanding of their uptake mechanism, which is needed for designing better ASOs with high activity and low toxicity. Here, we study the uptake mechanism of three therapeutically relevant ASOs (peptide-conjugated phosphorodiamidate morpholino (P-PMO), 2?Omethyl phosphorothioate (2?OMe) and phosphorothioated tricyclo DNA (tcDNA) that have been optimized to induce exon skipping in models of Deuchenne muscular dystrophy (DMD). We show that P-PMO and tcDNA have high propensity to spontaneously self-assemble into nanoparticles. P-PMO forms micelles of defined size and their net charge (zeta potential) is dependent on the medium and concentration. In biomimetic conditions and at low concentrations P-PMO obtains net negative charge and its uptake is mediated by class A scavenger receptor subtypes (SCARAs) as shown by competitive inhibition and RNAi silencing experiments in-vitro. In-vivo, the activity of P-PMO was significantly decreased in SCARA1 knock-out mice compared to wild-type animals. Additionally, we show that SCARA1 is involved in the uptake of tcDNA and 2?OMe as shown by competitive inhibition and co-localization experiments. Surface plasmon resonance binding analysis to SCARA1 demonstrated that P-PMO and tcDNA have higher binding profiles to the receptor compared to 2?OMe. These results demonstrate receptor-mediated uptake for a range of ASO chemistries, a mechanism that is dependent on their self-assembly into nanoparticles.

14-3-3zeta overexpression in multiple human cancers plays a critical role in cancer progression

14-3-3 is a family of highly conserved and ubiquitously expressed proteins in eukaryotic organisms. 14-3-3 isoforms bind in a phospho-serine/threonine-dependent manner to a host of proteins involved in essential cellular processes including cell cycle, signal transduction and apoptosis. We fortuitously discovered 14-3-3 zeta overexpression in many human primary cancers, such as breast, lung, and sarcoma, and in a majority of cancer cell lines. To determine 14-3-3 zeta involvement in breast cancer progression, we used immunohistochemical analysis to examine 14-3-3 zeta expression in human primary invasive breast carcinomas. High 14-3-3 zeta expression was significantly correlated with poor prognosis of breast cancer patients. Increased expression of 14-3-3 zeta was also significantly correlated with elevated PKB/Akt activation in patient samples. Thus, 14-3-3 zeta is a marker of poor prognosis in breast cancers. Furthermore, up-regulation of 14-3-3 zeta enhanced malignant transformation of cancer cells in vitro. ^ To determine the biological significance of 14-3-3 zeta in human cancers, small interfering RNAs (siRNA) were used to specifically block 14-3-3 zeta expression in cancer cells. 14-3-3 zeta siRNA inhibited cellular proliferation by inducing a G1 arrest associated with up-regulation of p27 KIP1 and p21CIP1 cyclin dependent kinase inhibitors. Reduced 14-3-3 zeta inhibited PKB/Akt activation while stimulating the p38 signaling pathway. Silencing 14-3-3 zeta expression also increased stress-induced apoptosis by caspase activation. Notably, 14-3-3 zeta siRNA inhibited transformation related properties of breast cancer cells in vitro and inhibited tumor progression of breast cancer cells in vivo. 14-3-3 zeta may be a key regulatory factor controlling multiple signaling pathways leading to tumor progression. ^ The data indicate 14-3-3 zeta is a major regulator of cell growth and apoptosis and may play a critical role in the development of multiple cancer types. Hence, blocking 14-3-3 zeta may be a promising therapeutic approach for numerous cancers. ^

Caracterización de tres suelos en Hidalgo y Querétaro, México: disponibilidad y daño tóxico por arsénico en garbanzo (Cicer arietinum L.)

La presencia de arsénico (As) en suelos permite su migración hacia cultivos como el garbanzo (Cicer arietinum L.). En este trabajo se comparan contenidos de As en tres suelos de dos estados de la República Mexicana, y su acumulación en C. arietinum L. Los suelos resultaron moderadamente alcalinos, no salinos, reductores intermedios y con potenciales zeta (pZ) que indican suspensiones coloidales moderadamente estables. Con moderados contenidos de humedad y texturas franco- arcillosas, densidad aparente, capacidad de campo, agregados estables y capacidad de intercambio catiónico, significativamente diferentes y semejantes en velocidad de infiltración y espesor del horizonte A. En materia orgánica, carbono y nitrógeno son significativamente diferentes y con bajos contenidos. Existen diferencias importantes entre semillas de C. arietinum L. certificadas o no en su capacidad de germinación y desarrollo de raíces. El efecto genotóxico del As en raíces de C. arietinum L. se apreció por inducción de micronúcleos, reducción de 2,8 veces la división celular de muestras tratadas con agua con As, respecto de muestras control. Se apreció incremento de As de 9,5 veces en plántulas germinadas en suelo de El Salitre, que en suelo de Bella Vista, indicativo de migración del As. La suma de efectos de concentración de As en suelos y agua se incrementa 15,3 veces. Entre suelos de Bella Vista y Querétaro la correlación fue 2,9 veces mayor. En controles positivos los IBAs resultan 3 veces mayores que en las pruebas experimentales.

Postglacial deposition of sand in the Eckernfoerder Bay, western Baltic Sea

At the NW-slope of Eckernforder Bay (Western Baltic) between 14 and 21 m water depth 7 sand cores were taken with a vibrocorer. The cores were between 85 and 250 cm long. The sand was analysed for grain size distribution, proportions of organic carbon and carbonate, and contents of microfossils. The radiometric age and stable carbon isotope ratios were determined on organic material from 14 sample. With regard to benthic foraminifera and other microorganisms four different types of depositional conditions could be distinguished: Types 1 and 2: two types of offshore sand areas. Type 3: lagoon and nearshore. Type 4: subaerial or limnic. Using sedimentological and geochemical parameters two formation areas could be distinguished with the aid of a discriminant analysis: offshore (types 1 and 2) and nearshore (types 3 and 4). A juxtaposition of core sections indicated two distinct profiles. Their ages fit into the picture of the assumed postglacial sea-level rise. The lagoon- and nearshore sands are interpreted as the result of sea-level stagnation at 17-18 m below present sea-level. The accumulation rates of the sand in the offshore areas are, with a maximum of 0.15 mm/yr., an order of magnitude smaller than in the mud areas, located several hundred metres away.

Grain size distribution and percentiles of the sand component from sediments obtained in the southern Great Belt, Baltic Sea

Im Sedimentationsraum der südwestlichen Ostsee verdient der nordöstliche Teil der Kieler Bucht besonderes Interesse. Dort öffnet sich die wichtigste Verbindung zwischen Ostsee und Nordsee. Von den Austauschvorgängen, durch welche diese Meeresräume aufeinander Einfluß nehmen, ist gerade jenes Gebiet entscheidend betroffen. Die Beobachtung der Dynamik des Austausches, die Beobachtung der Transportlast, welche von den Wassermassen bewegt wird, und schließlich auch die Beobachtung der Beziehungen, welche sich zwischen dem Zusammentreffen von Wassermassen unterschiedlicher physikalischer Eigenschaften und der Sedimentbildung ergeben, läßt deshalb vor allem dort wesentliche Hinweise zum Verständnis der Sedimentationsvorgänge in der südlichen Ostsee erhoffen. In der vorliegenden Arbeit wurden an 49 Durchschnittsproben die Korngrößenverteilungen und Schwermineralgehalte von Sedimenten aus dem Südausgang des Großen Beltes untersucht. 1. Es wurden sechs in sich morphologisch etwa gleichwertige Gebiete ausgegliedert, die jeweils durch Sedimente mit ähnlichen Korngrößenverteilungen ausgezeichnet sind. Nach Lage, Typ und genetischer Ausdeutbarkeit fügen sich diese Gebiete dem von O. PRATJE (1939, 1948) gegebenen Modell der Sedimentationszonen gut ein. 2. Innerhalb dieser Gebiete ergibt sich für Sande in mehr als 20 m Wassertiefe südwärts gerichteter Transport. Oberhalb dieser Tiefe läßt sich stellenweise nordwärts gerichteter Transport nachweisen. 3. Der Schwermineralgehalt der Sedimente bleibt immer unter zwei Prozent. Die höchsten Anteile (1,7 bzw. 1,9%) werden in den Sedimenten der Tiefen Rinne und der ufernahen Bereiche des Großen Beltes angetroffen. 4. Die Korngrößenverteilungen der Sedimente werden nach der Lage der Modi in bis zu drei (Kies-, Sand-, Silt-) Komponenten zerlegt. Die Beteiligung der Silt-Komponente wird entscheidend von der Salzgehaltssprungschicht beeinflußt. 5. Es bestehen offensichtlich Zusammenhänge zwischen der Schlicksedimentation und der Salzgehaltsschichtung auch in der weiteren südlichen Ostsee.

Heavy mineral content and grain sizes of sediment samples from foreshore to dune around Skagen, north Denmark

Aufbau und Ausdehnung der Schwermineral-Anreicherungen (Ilmenit, Granat, Amphibol) am Strand südlich Skagens wurden in langen Schürfgräben untersucht. Die Seifenlagen ziehen durchgehend vom Kliff-Fuß bis zur mittleren Meereshöhe hin und liegen meist diskordant auf der alten Strandschichtung. Ihre strandparallele Ausdehnung beträgt bis zu 100 m. Aufgebaut werden sie aus dünnen Schwermineral-Lamellen, die in kleinerem Umfang überall in den Strandablagerungen zu finden sind und hier das Gefüge nachzeichnen (Rippeln, Strandwallschichtung, Schichtstörungen). Die Seifenbildung geht in einem Gebiet mit verstärktem Küstenabtrag vor sich (Lee-Erosion südlich der Hafenmolen von Skagen). Dieses deutet darauf hin, daß die Schwerminerale bei Aufarbeitung bereits vorhandener Sedimente infolge ihres unterschiedlichen hydraulischen Verhaltens Zurückbleiben und schließlich angereichert werden. Die Korngrößenverteilung der Minerale in verschiedenen Sedimentproben zeigen, daß mit steigender Schwermineral-Anreicherung eine Kornverfeinerung und Zunahme der spezifisch schwersten Minerale (opake Erzminerale und Zirkon) auftritt. In ähnlicher Weise werden die Sortierungswerte besser. Die Aufbereitung des Sedimentes wird, in Anlehnung an v. ENGELHARDT (1939), mit einem doppelten Sortierungsvorgang durch die Wasserbewegung am Strand erklärt. Beim Absinken des Sandes nach dem Brecherschwall tritt eine Vorsortierung ein, die den Abtransport der leichteren und größeren Minerale im Sog begünstigt. Verbindungen zu Vorstellungen der Aufbereitungstechnik (Rundherdverfahren) und Hydrodynamik ('laminare Unterschicht') werden hergestellt. Die Dünensande Skagens sind infolge ihres hohen Schwermineralgehaltes und günstiger Äquivalentgrößen der einzelnen Minerale besonders bedeutsam für die Seifenbildung am Strand.

Grain size investigations of sediments off the coast of Istria

Composition, grain-size distribution, and areal extent of Recent sediments from the Northern Adriatic Sea along the Istrian coast have been studied. Thirty one stations in four sections vertical to the coast were investigated; for comparison 58 samples from five small bays were also analyzed. Biogenic carbonate sediments are deposited on the shallow North Adriatic shelf off the Istrian coast. Only at a greater distance from the coast are these carbonate sediments being mixed with siliceous material brought in by the Alpine rivers Po, Adige, and Brenta. Graphical analysis of grain-size distribution curves shows a sediment composition of normally three, and only in the most seaward area, of four major constituents. Constituent 1 represents the washed-in terrestrial material of clay size (Terra Rossa) from the Istrian coastal area. Constituent 2 consists of fine to medium sand. Constituent 3 contains the heterogeneous biogenic material. Crushing by organisms and by sediment eaters reduces the coarse biogenic material into small pieces generating constituent 2. Between these two constituents there is a dynamic equilibrium. Depending upon where the equilibrium is, between the extremes of production and crushing, the resulting constituent 2 is finer or coarser. Constituent 4 is composed of the fine sandy material from the Alpine rivers. In the most seaward area constituents 2 and 4 are mixed. The total carbonate content of the samples depends on the distance from the coast. In the near coastal area in high energy environments, the carbonate content is about 80 %. At a distance of 2 to 3 km from the coast there is a carbonate minimum because of the higher rate of sedimentation of clay-sized terrestrial, noncarbonate material at extremely low energy environments. In an area between 5 and 20 km off the coast, the carbonate content is about 75 %. More than 20 km from the shore, the carbonate content diminishes rapidly to values of about 30 % through mixing with siliceous material from the Alpine rivers. The carbonate content of the individual fractions increases with increasing grain-size to a maximum of about 90 % within the coarse sand fractions. Beyond 20 km from the coast the samples show a carbonate minimum of about 13 % within the sand-size classes from 1.5 to 0.7 zeta¬? through mixing with siliceous material from the alpine rivers. By means of grain-size distribution and carbonate content, four sediment zones parallel to the coast were separated. Genetically they are closely connected with the zonation of the benthic fauna. Two cores show a characteristic vertical distribution of the sediment. The surface zone is inversely graded, that means the coarse fractions are at the top and the fine fractions are at the bottom. This is the effect of crushing of the biogenic material produced at the surface by predatory organisms and by sediment eaters. lt is proposed that at a depth of about 30 cm a chemical solution process begins which leads to diminution of the original sediment from a fine to medium sand to a silt. The carbonate content decreases from about 75 % at the surface to 65 % at a depth of 100 cm. The increase of the noncarbonate components by 10 % corresponds to a decrease in the initial amount of sediment (CaC03=75 %) by roughly 30 % through solution. With increasing depth the carbonate content of the individual fractions becomes more and more uniform. At the surface the variation is from 30 % to 90 %, at the bottom it varies only between 50 % and 75 %. Comparable investigations of small-bay sediments showed a c1ear dependence of sediment/faunal zonation from the energy of the environment. The investigations show that the composition and three-dimensional distribution of the Istrian coastal sediments can not be predicted only from one or a few measurable factors. Sedimentation and syngenetic changes must be considered as a complex interaction between external factors and the actions of producing and destroying organisms that are in dynamic equilibrium. The results obtained from investigations of these recent sediments may be of value for interpreting fossil sediments only with strong limitations.

Grain size percentiles and Mk values of coastal sediments from Schleswig Holstein, western Baltic Sea

In einer Fülle sedimentpetrographischer Arbeiten wird versucht, aus der Korngrößenverteilung und der Mineralzusammensetzung von Sanden Schlüsse auf ihre Herkunft, ihre Transportrichtung oder ihr Ablagerungsmilieu abzuleiten, die für die Lösung geologischer und ebenso auch wasserbaulicher Probleme nötig sind. Diese Literatur steckt noch voller Widersprüche und Fehlschlüsse. In der vorliegenden Arbeit wird daher versucht, den Mechanismus des Sandtransports vom Grundsätzlichen her besser verständlich zu machen. Das geschieht anhand zweier ausgewählter und eingehend untersuchter Beispiele aus dem Küstenbereich der westlichen Ostsee unter Einbeziehung der Erfahrungen an vielen Vergleichsproben aus verschiedensten Sedimentationsräumen. Unentbehrlich für das Verständnis der transportbedingten Veränderungen an den Sanden ist das sog. 'Äquivalenzprinzip' (Abschnitt 2). Es stellt fest, daß es in einem von einer Strömung transportierten Sediment immer Körner zwar verschiedener Korngröße, aber auch entsprechend verschiedener Dichte und/oder Kornform gibt, die miteinander transportiert und abgelagert werden, weil unter den herrschenden hydraulischen Bedingungen diese Eigenschaften einander voll kompensieren. In Abschnitt 3 wird kurz die von Rittenhouse angegebene Methode geschildert, mit der man an natürlichen Sedimenten unter der sehr allgemein gehaltenen 'Äquivalenzbedingung' gleicher Transportierbarkeit bestimmen kann, welches Korngrößenverhältnis ein bestimmtes Verhältnis der Dichten kompensieren kann. Die von Rittenhouse am Beispiel von Flußsanden gefundene Funktion zwischen der Dichte der Körner und ihrem Äquivalenzverhältnis gegen Quarzkörner wird hier als erste Näherung auch für die Transportverhältnisse von Strandsanden zugrunde gelegt. In Abschnitt 6 wird gezeigt, daß das auch gerechtfertigt ist. In Abschnitt 4 wird eine allgemein brauchbare Methode abgeleitet, mit der man nicht nur unter stark vereinfachenden Annahmen, sondern auch an Sanden mit realen, stets komplexen Korn-größenverteilungen die Folgen des Äquivalenzprinzips für die Verteilung von Mineralen verschiedener Dichte berechnen kann. Für jede Serie von Sanden, deren Korngrößenverteilungen entlang des Transportweges eine bestimmte, von den Transportbedingungen abhängige Entwicklung durchmachen, ergibt sich damit eine Kurvenschar, die beschreibt, wie sich die Mengen von Mineralien mit verschiedenen Dichten in den einzelnen Korngrößenklassen dabei ändern müßten, vorausgesetzt, daß sie im gesamten Korngrößenbereich gleich verfügbar wären. Diese Kurvenschar ist die 'Charakteristik' des betreffenden Transportfalles. Durch den Vergleich zwischen den nach der Charakteristik in den einzelnen Klassen zu erwartenden Mineralmengen mit den in dem betrachteten Transportfall tatsächlich gefundenen läßt sich deren relative, d. h. auf die Menge des Quarzes bezogene 'Verfügbarkeit' berechnen. Sie wird durch die sog. 'hydraulischen Verhältnisse' (Rittenhouse) ausgedrückt, die im Gegensatz zu den 'Klassenverhältnissen' von der Korngrößensonderung beim Transport unabhängig und nur von der Zusammensetzung des Ausgangsmaterials bestimmt sind, solange beim Transport allein das Äquivalenzprinzip wirksam ist. In den untersuchten Fällen von Sandtransport an zwei Strandabschnitten der westlichen Ostsee (Abschnitt 5) zeigte dieser Vergleich (Abschnitt 6), daß die beobachtete Verteilung von Schwermineralen nicht allein durch Transportsonderung unter Gültigkeit des Äquivalenzprinzips erklärt werden kann, sondern daß dabei offenbar auch mechanische Zerkleinerung der Körner während des Transports mitgewirkt haben muß. Nur ein solcher, von der Transportsonderung unabhängiger Effekt kann als Transportrichtungs-Kriterium benutzt werden, wenn die Entwicklung der Korngrößenverteilungen allein keine Entscheidung erlaubt. Wie die Beispiele zeigen, läßt sich Klarheit über die bisher noch sehr umstrittene Frage nach dem Ausmaß der transportbedingten mechanischen Zerkleinerung von Sandkörnern nur gewannen, wenn in Zukunft versucht wird, bei der Bearbeitung natürlicher Beispiele den Einfluß der stets vorhandenen Transportsonderung auf Veränderungen des Mineralbestandes unter Anwendung des Äquivalenzprinzips rechnerisch auszuschalten. Über dieses wesentlichste Ergebnis hinaus erlauben die dargestellten Zusammenhänge auch eine kritische Stellungnahme zu den oben erwähnten allgemeinen Problemen und führen zu methodischen und sachlichen Verbesserungsvorschlägen für weitere Untersuchungen an klastischen Sedimenten.