In vitro wear, surface roughness and hardness of propanal-containing and diacetyl-containing novel composites and copolymers based on bis-GMA analogs

Objective. To evaluate the effect of two additives, aldehyde or diketone, on the wear, roughness and hardness of bis-GMA-based composites/copolymers containing TEGDMA, propoxylated bis-GMA (CH(3)bis-GMA) or propoxylated fluorinated bis-GMA (CF(3)bis-GMA). Methods. Fifteen experimental composites and 15 corresponding copolymers were prepared combining bis-GMA and TEGDMA, CH3bis-GMA or CF3bis-GMA, with aldehyde (24mol% and 32 mol%) or diketone (24 mol% and 32 mol%) totaling 30 groups. For composites, hybrid treated filler (barium aluminosilicate glass/pyrogenic silica; 60 wt%) was added to monomer mixtures. Photopolymerization was affected by 0.2 wt% each of camphorquinone and N,N-dimethyl-p-toluidine. Wear (W) test was conducted in a toothbrushing abrasion machine (n = 6) and quantified using a profilometer. Surface roughness (R) changes, before and after abrasion test, were determined using a rugosimeter. Microhardness (H) measurements were performed for dry and wet samples using a Knoop microindenter (n = 6). Data were analyzed by one-way ANOVA and Tukey`s test (alpha = 0.05). Results. Incorporation of additives led to improved W and H values for bis-GMA/TEGDMA and bis-GMA/CH(3)bis-GMA systems. Additives had no significant effect on the W and H changes of bis-GMA/CF(3)bis-GMA. With regard to R changes, additives produced decreased values for bis-GMA/CH3bis-GMA and bis-GMA/CF3bis-GMA composites. Bis-GMA/TEGDMA and bis-GMA/CH(3)bis-GMA copolymers with additives became smoother after abrasion test. Significance. The findings correlate with additives ability to improve degree of conversion of some composites/copolymers thereby enhancing mechanical properties. Published by Elsevier Ltd on behalf of Academy of Dental Materials

Influence of curing rate on softening in ethanol, degree of conversion, and wear of resin composite

Purpose: To investigate the effect of curing rate on softening in ethanol, degree of conversion, and wear of resin composites. Methods: With a given energy density and for each of two different light-curing units (QTH or LED), the curing rate was reduced by modulating the curing mode. Thus, the irradiation of resin composite specimens (Filtek Z250, Tetric Ceram, Esthet-X) was performed in a continuous curing mode and in a pulse-delay curing mode. Wallace hardness was used to determine the softening of resin composite after storage in ethanol. Degree of conversion was determined by infrared spectroscopy (FTIR). Wear was assessed by a three-body test. Data were submitted to Levene`s test, one and three-way ANOVA, and Tukey HSD test (alpha= 0.05). Results: Immersion in ethanol, curing mode, and material all had significant effects on Wallace hardness. After ethanol storage, resin composites exposed to the pulse-delay curing mode were softer than resin composites exposed to continuous cure (P< 0.0001). Tetric Ceram was the softest material followed by Esthet-X and Filtek Z250 (P< 0.001). Only the restorative material had a significant effect on degree of conversion (P< 0.001): Esthet-X had the lowest degree of conversion followed by Filtek Z250 and Tetric Ceram. Curing mode (P= 0.007) and material (P< 0.001) had significant effect on wear. Higher wear resulted from the pulse-delay curing mode when compared to continuous curing, and Filtek Z250 showed the lowest wear followed by Esthet-X and Tetric Ceram. (Am J Dent 2011;24:115-118).

The impact of stress and anxiety on the pressure pain threshold of myofascial pain patients

The purpose of this study was to evaluate the influence of stress and anxiety on the pressure pain threshold (PPT) of masticatory muscles and on the subjective pain report. Forty-five women, students, with mean age of 19.75 years, were divided into two groups: group 1:29 presenting with masticatory myofascial pain (MFP), according to the Research Diagnostic Criteria for Temporomandibular Disorders and group 2: 16 asymptomatic controls. An electronic algometer registered the pain thresholds on four different occasions throughout the academic year. To measure levels of stress, anxiety and pain, the Beck Anxiety Inventory, Lipp Stress Symptoms Inventory and Visual Analog Scale (VAS) were used. Three-way anova and Tukey`s tests were used to verify differences in PPT between groups, times and sites. Levels of anxiety and VAS were compared using Mann-Whitney test, while Friedman`s test was used for the within-groups comparison at different times (T1 to T4). The chi-squared and Cochran tests were performed to compare groups for the proportion of subjects with stress (alpha = 0.05). Differences in PPT recordings between time (P = 0.001) and sites (P < 0.001) were detected. Higher levels of anxiety and lower PPT figures were detected at T2 (academic examination) (P = 0.001). There was no difference between groups for anxiety and stress at any time (P > 0.05). The MFP group also has shown significant increase of VAS at the time of academic examination (P < 0.001). External stressors such as academic examinations have a potential impact on masticatory muscle tenderness, regardless of the presence of a previous condition such as masticatory myofascial pain.

Mechanical Testing of Indirect Composite Materials Directly Applied on Implant Abutments

Purpose: To test the strength to failure and fracture mode of three indirect composite materials directly applied onto Ti-6Al-4V implant abutments vs cemented standard porcelain-fused-to-metal (PFM) crowns. Materials and Methods: Sixty-four locking taper abutments were randomly allocated to four groups and were cleaned in ethanol in an ultrasonic bath for 5 min. After drying under ambient conditions, the abutments were grit blasted and a custom 4-cusp molar crown mold was utilized to produce identical crowns (n = 16 per group) of Tescera (Bisco), Ceramage (Shofu), and Diamond Crown (DRM) according to the manufacturer`s instructions. The porcelain-fused-to-metal crowns were fabricated by conventional means involving the construction and a wax pattern and casting of a metallic coping followed by sintering of increasing layers of porcelain. All crowns were loaded to failure by an indenter placed at one of the cusp tips at a 1 mm/min rate. Subsequently, fracture analysis was performed by means of stereomicroscopy and scanning electron microscopy. One-way ANOVA at 95% level of significance was utilized for statistical analysis. Results: The single load to failure (+/- SD) results were: Tescera (1130 +/- 239 N), Ceramage (1099 +/- 257 N), Diamond Crown (1155 +/- 284 N), and PFM (1081 +/- 243 N). Stereomicroscopy analysis showed two distinct failure modes, where the loaded cusp failed either with or without abutment/metallic coping exposure. SEM analysis of the fractures showed multiple crack propagation towards the cervical region of the crown below a region of plastic deformation at the indenter contact region. Conclusion: The three indirect composites and PFM systems fractured at loads higher than those typically associated with normal occlusal function. Although each material had a different composition and handling technique, no significant differences were found concerning their single load to fracture resistance among composite systems and PFM.

Effect of repeated cycles of chemical disinfection on the roughness and hardness of hard reline acrylic resins

Objective: The aim of this study was to assess the effect of repeated cycles of five chemical disinfectant solutions on the roughness and hardness of three hard chairside reliners. Methods: A total of 180 circular specimens (30 mm x 6 mm) were fabricated using three hard chairside reliners (Jet; n = 60, Kooliner; n = 60, Tokuyama Rebase II Fast; n = 60), which were immersed in deionised water (control), and five disinfectant solutions (1%, 2%, 5.25% sodium hypochlorite; 2% glutaraldehyde; 4% chlorhexidine gluconate). They were tested for Knoop hardness (KHN) and surface roughness (mu m), before and after 30 simulated disinfecting cycles. Data was analysed by the factorial scheme (6 x 2), two-way analysis of variance (anova), followed by Tukey`s test. Results: For Jet (from 18.74 to 13.86 KHN), Kooliner (from 14.09 to 8.72 KHN), Tokuyama (from 12.57 to 8.28 KHN) a significant decrease in hardness was observed irrespective of the solution used on all materials. For Jet (from 0.09 to 0.11 mu m) there was a statistically significant increase in roughness. Kooliner (from 0.36 to 0.26 mu m) presented a statistically significant decrease in roughness and Tokuyama (from 0.15 to 0.11 mu m) presented no statistically significant difference after 30 days. Conclusions: This study showed that all disinfectant solutions promoted a statistically significant decrease in hardness, whereas with roughness, the materials tested showed a statistically significant increase, except for Tokuyama. Although statistically significant values were registered, these results could not be considered clinically significant.

Influence of curing protocol on selected properties of light-curing polymers: Degree of conversion, volume contraction, elastic modulus, and glass transition temperature

Objectives. The purpose of this study was to investigate the effect of light-curing protocol on degree of conversion (DC), volume contraction (C), elastic modulus (E), and glass transition temperature (T(g)) as measured on a model polymer. It was a further aim to correlate the measured values with each other. Methods. Different light-curing protocols were used in order to investigate the influence of energy density (ED), power density (PD), and mode of cure on the properties. The modes of cure were continuous, pulse-delay, and stepped irradiation. DC was measured by Raman micro-spectroscopy. C was determined by pycnometry and a density column. E was measured by a dynamic mechanical analyzer (DMA), and T(g) was measured by differential scanning calorimetry (DSC). Data were submitted to two-and three-way ANOVA, and linear regression analyses. Results. ED, PD, and mode of cure influenced DC, C, E, and T(g) of the polymer. A significant positive correlation was found between ED and DC (r = 0.58), ED and E (r = 0.51), and ED and T(g) (r = 0.44). Taken together, ED and PD were significantly related to DC and E. The regression coefficient was positive for ED and negative for PD. Significant positive correlations were detected between DC and C (r = 0.54), DC and E (r = 0.61), and DC and T(g) (r = 0.53). Comparisons between continuous and pulse-delay modes of cure showed significant influence of mode of cure: pulse-delay curing resulted in decreased DC, decreased C, and decreased T(g). Influence of mode of cure, when comparing continuous and step modes of cure, was more ambiguous. A complex relationship exists between curing protocol, microstructure of the resin and the investigated properties. The overall performance of a composite is thus indirectly affected by the curing protocol adopted, and the desired reduction of C may be in fact a consequence of the decrease in DC. (C) 2009 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

The influence of storage condition and duration on the resistance to fracture of different fiber post systems

Purpose: To evaluate the effects of storage condition and duration on the resistance to fracture of different fiber post systems (and to morphologically assess the post structure before and after storage. Methods: Three types of fiber posts (DT Light Post, GC Post, FRC Postect Plus) were divided in different groups (n=12) according to the storage condition (dry at 37 degrees C; saline water at 37 degrees C; mineral oil at 37 degrees C and storage inside the roots of extracted human teeth immersed in saline water at 37 degrees C and duration (6, 12 months). A universal testing machine loading at a 90 degrees angle was employed for the three-point bending test. The test was carried out until fracture of the post. A 3-way ANOVA and Tukey`s test (alpha= 0.05) were used to compare the effect of the experimental factors on the fracture strength. Two posts of each group were observed before and after the storage using a scanning electron microscope. Results: Storage condition and post type had a significant effect on post fracture strength (P< 0.05). The interaction between these factors was significant (P< 0.05). Water storage significantly decreased the fracture strength, regardless of the post type and the storage duration. Storage inside roots, in oil, and at dry conditions did not significantly affect post fracture strength. SEM micrographs revealed voids between fibers and resin matrix for posts stored in water. Posts stored under the other conditions showed a compact matrix without porosities. (Am J Dent 2009;22:366-370).

Evaluation of the Bond Strength of Denture Base Resins to Acrylic Resin Teeth: Effect of Thermocycling

Purpose: The purpose of this study was to evaluate the thermocycling effects and shear bond strength of acrylic resin teeth to denture base resins. Materials and Methods: Three acrylic teeth (Biotone, Trilux, Ivoclar) were chosen for bonding to four denture base resins: microwave-polymerized (Acron MC), heat-polymerized (Lucitone 550 and QC-20), and light-polymerized (Versyo. bond). Twenty specimens were produced for each denture base/acrylic tooth combination and were divided into two groups (n = 10): without thermocycling (control groups) and thermocycled groups submitted to 5000 cycles between 4 and 60 degrees C. Shear strength tests (MPa) were performed with a universal testing machine at a crosshead speed of 1 mm/min. Statistical analysis of the results was carried out with three-way ANOVA and Bonferroni`s multiple comparisons post hoc analysis for test groups (alpha = 0.05). Results: The shear bond strengths of Lucitone/Biotone, Lucitone/Trilux, and Versyo/Ivoclar specimens were significantly decreased by thermocycling, compared with the corresponding control groups (p < 0.05). The means of Acron/Ivoclar and Lucitone/Ivoclar specimens increased after thermocycling (p < 0.05). The highest mean shear bond strength value was observed with Lucitone/Biotone in the control group (14.54 MPa) and the lowest with QC-20/Trilux in the thermocycled group (3.69 MPa). Conclusion: Some acrylic tooth/denture base resin combinations can be more affected by thermocycling; effects vary based upon the materials used.

Effect of methyl methacrylate monomer on bond strength of denture base resin to acrylic teeth

Bond failures at the acrylic teeth and denture base resin interface are still a common clinical problem in prosthodontics. The effect of methyl methacrylate (MMA) monomer on the bond strength of three types of denture base resins (Acron MC, Lucitone 550 and QC-20) to two types of acrylic teeth (Biotone and Trilux) was evaluated. Twenty specimens were produced for each denture base resin/acrylic tooth combination and were randomly divided into control (acrylic teeth received no surface treatment) and experimental groups (MMA was applied to the surface of the acrylic teeth for 180 s) and were submitted to shear tests (1 mm/mm). Data (MPa) were analyzed using three-way ANOVA/Student`s test (alpha = 0.05). MMA increased the bond strength of Lucitone denture base resins and decreased the bond strength of QC-20. No difference was detected for the bond strength of Acron MC base resin after treatment with MMA. (C) 2008 Elsevier Ltd. All rights reserved.

Students' engagement in school : analyses according to peer victimization and grade, throughout adolescence

8th International Technology, Education and Development Conference, Valencia 10th, 11th and 12th of March, 2014.

Psicopatologia obsessivo-compulsiva na distonia focal primária : aspectos neuropsiquiátricos de uma doença do movimento

RESUMO: pela contracção involuntária de grupos musculares de extensão variável, originando movimentos involuntários e posturas anómalas, por vezes dolorosas. O tratamento convencional consiste em injecções localizadas de toxina botulínica, podendo, em casos refractários, estar indicado o tratamento por estimulação cerebral profunda. A neurobiologia da distonia focal primária permanece incompletamente compreendida. Os estudos de neuro-imagem estrutural e funcional revelam alterações subtis da anatomia e funcionamento do estriado e das vias cortico-basais, com destaque para o aumento do volume, da actividade metabólica e da neuroplasticidade do putamen e de áreas corticais motoras, pré-motoras e sensitivas. O conjunto destas alterações aponta para uma disrupção da regulação inibitória de programas motores automáticos sustentados pelo estriado e pelas vias ortico-subcorticais. Nos últimos anos tem crescido o interesse pelas manifestações psiquiátricas e cognitivas da distonia (estas últimas muito pouco estudadas). Tem despertado particular interesse a possível associação entre distonia focal primária e perturbação obsessivo-compulsiva (POC), cuja neurobiologia parece notavelmente sobreponível à da distonia primária. Com efeito, os estudos de neuro-imagem estrutural e funcional na POC revelam consistentemente aumento do volume e actividade do estriado e do córtex órbito-frontal, apontando mais uma vez para uma disfunção do controlo inibitório, no estriado, de programas comportamentais e cognitivos automáticos. Objectivos: 1. Explorar a prevalência e intensidade de psicopatologia em geral, e de psicopatologia obsessivo-compulsiva em particular, numa amostra de indivíduos com distonia focal primária; 2. Explorar a ocorrência, natureza e intensidade de alterações do funcionamento cognitivo numa amostra de indivíduos com distonia focal primária; 3. Investigar a associação entre a gravidade da distonia focal, a intensidade da psicopatologia, e a intensidade das alterações cognitivas. Metodologia: Estudo de tipo transversal, caso-controlo, observacional e descritivo, com objectivos puramente exploratórios. Casos: 45 indivíduos com distonia focal primária (15 casos de blefaroespasmo, 15 de cãibra do escrivão, 15 de distonia cervical espasmódica), recrutados através da Associação Portuguesa de Distonia. Critérios de inclusão: idade = 18; distonia focal primária pura (excluindo casos de distonia psicogénica possível ou provável de acordo com os critérios de Fahn e Williams); Metabolismo do cobre e Ressonância Magnética Nuclear sem alterações. Controlos doentes: 46 casos consecutivos recrutados a partir da consulta externa do Hospital Egas Moniz: 15 doentes com espasmo hemifacial, 14 com espondilartropatia cervical, 17 com síndrome do canal cárpico. Controlos saudáveis: 30 voluntários. Critérios de exclusão para todos os grupos: Mini-Mental State Examination patológico, tratamento actual com anti-colinérgicos, antipsicóticos, inibidores selectivos da recaptação da serotonina, antidepressivos tri- ou tetracíclicos. Avaliação: Avaliação neurológica: história e exame médico e neurológico completos. Cotação da gravidade da distonia com a Unified Dystonia Rating Scale. Avaliação psicopatológica: Symptom Check-List-90-Revised; entrevista psiquiátrica de 60 minutos incluindo a Mini-International Neuropsychiatric Interview (MINI), versão 4.4 (validada em Português), complementada com os módulos da MINI Plus versão 5.0.0 para depressão ao longo da vida e dependência/ abuso do álcool e outras substâncias ao longo da vida; Yale-Brown Obsessive-Compulsive Symptom Checklist e a Yale-Brown Obsessive-Compulsive Scale (Y-BOCS). Avaliação neuropsicológica: Wisconsin Card Sorting Test (WCST; flexibilidade cognitiva); Teste de Stroop (inibição de resposta); Block Assembly Test (capacidade visuo-construtiva); Teste de Retenção Visual de Benton (memória de trabalho visuo-espacial). Análise estatística:os dados foram analisados com a aplicação informática SPSS for Windows, versão 13. Para a comparação de proporções utilizaram-se o teste do Chi-quadrado e o teste de Fisher. Para a comparação de variáveis quantitativas entre dois grupos utilizou-se o teste t de Student ou o teste U de Mann-Whitney (teste de Wilcoxon no caso de amostras emparelhadas). Para comparações de médias entre três grupos recorreu-se à Análise de Variância a um factor (variáveis de intervalo e de rácio), ou ao teste de Kruskal-Wallis (variáveis ordinais). Para o estudo da associação entre variáveis foram utilizados os coeficientes de correlação de Pearson ou de Spearman, a análise de correlações canónicas, a análise de trajectórias e a regressão logística. Adoptou-se um Alpha de 0.05. Resultados: Os doentes com distonia focal primária apresentaram uma pontuação média na Y- -BOCS significativamente superior à dos dois grupos de controlo. Em 24.4% dos doentes com distonia a pontuação na Y-BOCS foi superior a 16. Estes doentes eram predominantemente mulheres, tinham uma maior duração média da doença e referiam predominantemente sintomas obsessivo-compulsivos (SOC) de contaminação e lavagem. Os dois grupos com doença crónica apresentaram pontuações médias superiores às dos indivíduos saudáveis nas escalas de ansiedade, somatização e psicopatologia geral. Os doentes com distonia tratados com toxina botulínica apresentaram pontuações inferiores às dos doentes não tratados nas escalas de ansiedade generalizada, fobia, somatização e depressão, mas não na Y-BOCS. Sessenta por cento dos doentes com distonia apresentavam pelo menos um diagnóstico psiquiátrico actual ou pregresso. O risco de apresentar um diagnóstico psiquiátrico actual era menor nos doentes tratados com toxina botulínica, aumentando com a gravidade da doença. A prevalência de POC foi 8,3% e a de depressão major 37,7%. No WCST e na Prova de Benton, os doentes com distonia focal primária demonstraram um desempenho inferior ao de ambos os grupos de controlo, cometendo sobretudo erros perseverativos. Os doentes com distonia e pontuação na Y-BOCS > 16 cometeram mais erros e respostas perseverativas no WCST do que os restantes doentes com distonia. As análises de correlações e de trajectórias revelaram que nos doentes com distonia a gravidade da distonia foi, juntamente com a idade e a escolaridade, o factor que mais interagiu com o desempenho cognitivo. Discussão: o nosso estudo é o primeiro a descrever, nos mesmos doentes com distonia focal primária, SOC significativos e alterações cognitivas. Os nossos resultados confirmam a hipótese de uma associação clínica específica entre distonia focal primária e psicopatologia obsessivo-compulsiva. Confirmam igualmente que a distonia focal primária está associada a um maior risco de desenvolver morbilidade psiquiátrica ansiosa e depressiva. O tratamento com toxina botulínica reduz este risco, mas não influencia os SOC. Entre os doentes com distonia, os que têm SOC significativos poderão diconstituir um grupo particular com maior duração da doença (mas não uma maior gravidade), predomínio do sexo feminino e predomínio de SOC de contaminação e limpeza. Em termos cognitivos, os indivíduos com distonia focal primária apresentam défices significativos de flexibilidade cognitiva (particularmente acentuados nos doentes com SOC significativos) e de memória de trabalho visuo-espacial. Estes últimos devem-se essencialmente a um défice executivo e não a uma incapacidade visuo-construtiva ou visuo-perceptiva. A disfunção cognitiva não é explicável pela psicopatologia depressiva nem pela incapacidade motora, já que os controlos com doença periférica crónica tiveram um desempenho superior ao dos doentes com distonia. No seu conjunto os nossos resultados sugerem que os SOC que ocorrem na distonia focal primária constituem uma das manifestações clínicas da neurobiologia desta doença do movimento. O predomínio de sintomas relacionados com higiene e o perfil disexecutivo de alterações cognitivas–perseveração e dificuldades executivas de memória de trabalho visuo-espacial – apontam para a via cortico-basal dorso-lateral e para as áreas corticais que lhe estão associadas como estando implicadas na tripla associação entre sintomas motores, obsessivo-compulsivos e cognitivos. Conclusões: A distonia focal primária é um síndrome neuropsiquiátrico complexo com importantes manifestações não motoras, nomeadamente compromisso cognitivo do tipo disexecutivo e sintomas obsessivo-compulsivos. Clinicamente estas manifestações representam necessidades de tratamento que vão muito para além da simples incapacidade motora, devendo ser activamente exploradas e tratadas.-------------- ABSTRACT: Introduction: primary focal dystonia is an idiopathic movement disorder that manifests as involuntary, sustained contraction of muscular groups, leading to abnormal and often painful postures of the affected body part. Treatment is symptomatic, usually with local intramuscular injections of botulinum toxin. The neurobiology of primary focal dystonia remains unclear. Structural and functional neuroimaging studies have revealed subtle changes in striatal and cortical-basal pathway anatomy and function. The most consistent findings involve increased volume and metabolic activity of the putamen and of motor, pre-motor and somato-sensitive cortical areas. As a whole, these changes have been interpreted as reflecting a failure of striatal inhibitory control over automatic motor programs sustained by cortical-basal pathways. The last years have witnessed an increasing interest for the possible non-motor – mainly psychiatric and cognitive – manifestations of primary focal dystonia. The possible association of primary focal dystonia with obsessive-compulsive disorder (OCD) has raised particular interest. The neurobiology of the two disorders has indeed remarkable similarities: structural and functional neuroimaging studies in OCD have revealed increased volume and metabolic activity of the striatum and orbital-frontal cortex, again pointing to a disruption of inhibitory control of automatic cognitive and behavioural programs by the striatum. Objectives: 1. To explore the prevalence and severity of psychopathology – with a special emphasis on obsessive-compulsive symptoms (OCS) – in a sample of patients with primary focal dystonia;2. To explore the nature and severity of possible cognitive dysfunction in a sample of patients with primary focal dystonia; 3. To explore the possible association between dystonia severity, psychiatric symptom severity, and cognitive performance, in a sample of patients with primary focal dystonia. Methods: cross-sectional, case-control, descriptive study. Cases: forty-five consecutive, primary pure focal dystonia patients recruited from the Portuguese Dystonia Association case register (fifteen patients with blepharospasm, 15 with cervical dystonia and 15 with writer’s cramp). Inclusion criteria were: age = 18; primary pure focal, late-onset dystonia (excluding possible or probable psychogenic dystonia according to the Fahn & Williams criteria); normal copper metabolism and Magnetic Resonance Imaging. Diseased controls: forty-six consecutive subjects from our hospital case register (15 patients with hemi-facial spasm; 14 with cervical spondilarthropathy and cervical spinal root compression; 17 with carpal tunnel syndrome). Healthy controls were 30 volunteers.Exclusion criteria for all groups: Mini-Mental State Examination score below the validated cut-off for the Portuguese population (<23 for education between 1 and 11 years; <28 for education >11 years); use of anti-cholinergics, neuroleptics, selective serotonin reuptake inhibitors, triciclic or tetraciclic antidepressants. Assessment: neurological assessment: complete medical and neurological history and physical examination; dystonia severity scoring with the Unified Dystonia Rating Scale. Psychiatric assessment:Symptom Check-List-90-Revised; 60 minute-long psychiatric interview, including Mini-International Neuropsychiatric Interview (MINI), version 4.4 (validated Portuguese version), extended with the sections for life-time major depressive disorder and life-time alcohol and substance abuse disorder from MINI-Plus version 5.0.0; Yale-Brown Obsessive-Compulsive Symptom Checklist and Yale-Brown Obsessive-Compulsive Scale (Y-BOCS). Cognitive assessment: Wisconsin Card Sorting Test (WCST; cognitive set-shifting ability); Stroop Test (response inhibition); Block Assembly Test(visual-constructive ability); Benton’s Visual Retention Test (visual-spatial working memory). Statistic analysis: Data were analyzed with SPSS for Windows version 13. Proportions were compared using Chi-Square test, or Fisher’s exact test when appropriate. Student’s t-test or Mann-Whitney’s U test (or Wilcoxon’s teste in the case of matched samples) were used for two-group comparisons. P-values were corrected for multiple comparisons. One-way ANOVA with Bonferroni post-hoc analysis (interval data), or the Kruskal-Wallis Test (ordinal data), were used for three-group comparisons. Associations were analysed with Pearson’s or Spearman’s correlation coefficients, canonical correlations, path analysis and logistic regression analysis. Alpha was set at 0.05. Results: Dystonia patients had higher Yale-Brown Obsessive-Compulsive Symptom scores than both control groups. 24.4% of primary dystonia patients had a Y-BOCS score > 16. These patients were predominantly women; they had longer disease duration, and showed a predominance of hygiene-related OCS. The two groups with chronic disease had higher anxiety, somatization and global psychopathology scores than healthy subjects. Primary dystonia patients undergoing treatment with botulinum toxin had lower anxiety, phobia, somatization and depression scores than their untreated counterparts, but similar Y-BOCS scores. Sixty percent of primary dystonia patients had at least one lifetime psychiatric diagnosis. The odds of having a currently active psychiatric diagnosis were lower in botulinum toxin treated patients, and increased with dystonia severity. The prevalence of OCD was 6.7%, and the lifetime prevalence of major depression was 37.7%. Primary dystonia patients had a lower performance than the two control groups in both the WCST and Benton’s Visual Retention Test, mainly due to an excess of perseveration errors. Primary dystonia patients with Y-BOCS score > 16 had much higher perseveration error and perseveration response scores than dystonia patients with Y-BOCS = 16. Correlation and path analysis showed that, in the primary dystonia group, dystonia severity, along with age and education, was the main factor influencing cognitive performance. Discussion: our study is the first description ever of concomitant significant OCS and cognitive impairment in primary dystonia patients. Our results confirm that primary dystonia is specifically associated with obsessive-compulsive psychopathology. They also confirm that primary focal dystonia patients are at a higher risk of developing anxious and depressive psychiatric morbidity. Treatment with botulinum toxin decreases this risk, but does not influence OCS. Primary focal dystonia patients with significant OCS may constitute a particular subgroup. They are predominantly women, with higher disease duration (but not severity) and a predominance of hygiene related OCS.In terms of cognitive performance, primary focal dystonia patients have significant deficits involving set-shifting ability and visual-spatial working memory. The latter result from an essentially executive deficit, rather than from a primary visual-constructive apraxia or perceptual deficit. Furthermore, cognitive flexibility difficulties were more prominent in the subset of primary dystonia patients with significant OCS. The cognitive dysfunction found in dystonia patients is not attributable to depressive psychopathology or motor disability, as their performance was significantly lower than that of similarly impaired diseased controls. Our results suggest that OCS in primary focal dystonia are a direct, primary manifestation of the motor disorder’s neurobiology. The predominance of hygiene-related symptoms and the disexecutive pattern of cognitive impairment – set-shifting and visual-spatial working memory deficits – suggest that the dorsal-lateral cortical-basal pathway may play a decisive role in the triple association of motor dysfunction, OCS and cognitive impairment. Conclusions: primary focal dystonia is a complex neuropsychiatric syndrome with significant non- -motor manifestations, namely cognitive executive deficits and obsessive-compulsive symptoms.Clinically, our results show that PFD patients may have needs for care that extend far beyond a merely motor disability and must be actively searched for and treated.

Aptidão cardiorrespiratória e qualidade de vida pós-infarto em diferentes intensidades de exercício

FUNDAMENTO: Estudos que relacionam exercícios físicos e saúde têm contribuído para a compreensão da influência de hábitos sedentários com a incidência de doenças cardiovasculares. OBJETIVO: Comparar o efeito de diferentes intensidades de exercício aeróbio sobre a capacidade funcional (VO2 pico) e a qualidade de vida de pacientes pós-infarto agudo do miocárdio. MÉTODOS: 87 homens (57,7 anos, ± 6,1) participaram deste estudo prospectivo, com 12 semanas de treinamento físico de alta intensidade (n=29), a 85% da frequência cardíaca máxima, de intensidade moderada (n=29), a 75% da frequência cardíaca máxima, ou no grupo controle (n=29), que recebeu acompanhamento clínico. O exercício aeróbio foi realizado cinco vezes por semana, 45 minutos por sessão, além de exercícios de resistência muscular e alongamentos. O VO2 pico foi mensurado com teste cardiopulmonar, e a qualidade de vida foi avaliada pelo questionário MacNew. RESULTADOS: A ANOVA two-way revelou aumento do VO2 pico significativo (p<0,05) no grupo de alta intensidade (29,9 ± 2,2 ml/kg.min para 41,6 ± 3,9 ml/kg.min) em relação ao grupo de moderada intensidade (32,0 ± 5,3 ml/kg.min para 37,1 ± 3,9 ml/kg.min). Além disso, ambos os grupos de exercício aumentaram significativamente em relação ao grupo controle (31,6 ± 3,9 para 29,2 ± 4,1). A qualidade de vida teve melhora significativa (p<0,05) no grupo de alta intensidade (5,66 para 6,80) e de moderada intensidade (5,38 para 6,72), mas não no grupo controle (5,30 para 5,15) CONCLUSÃO: Os exercícios de maior intensidade resultaram em maior aumento na capacidade funcional e na qualidade de vida em pacientes no pós-infarto do miocárdio.

Estresse Isolado ou Associado ao Etanol Libera Prostanóides em Aorta de Ratos via ?2-Adrenoceptores

Fundamento: Estresse e etanol são ambos, independentemente, importantes fatores de risco cardiovascular. Objetivo: avaliar o risco cardiovascular do consumo de etanol e exposição ao estresse, isolados e em associação, em ratos machos adultos. Métodos: Os ratos foram separados em quatro grupos: controle, etanol (20% na água de beber durante seis semanas), estresse (imobilização 1h dia/5 dias por semana/ 6 semanas) e estresse/etanol. As curvas de concentração-resposta à noradrenalina - na ausência e na presença de ioimbina, L-NAME ou indometacina - ou fenilefrina foram determinadas em aortas torácicas com e sem endotélio. EC50 e resposta máxima (n = 8-12) foram comparadas através de ANOVA de dois fatores (two-way) / método de Bonferroni. Resultados: Estresse ou estresse em associação com o consumo de etanol aumentaram as respostas máximas de noradrenalina em aortas intactas. Essa hiper-reatividade foi eliminada pela remoção do endotélio, ou pela presença da indometacina ou ioimbina, mas não foi alterada pela presença de L-NAME. Enquanto isso, o consumo de etanol não alterou a reatividade à noradrenalina. As respostas da fenilefrina em aortas com e sem endotélio também permaneceram inalteradas independentemente do protocolo. Conclusão: O estresse crônico aumentou as respostas aórticas dos ratos à noradrenalina. Esse efeito é dependente do endotélio vascular e envolve a liberação de prostanóides vasoconstritores através da estimulação de α-2 adrenoceptores endoteliais. Além disso, o consumo crônico de etanol pareceu não influenciar as respostas de noradrenalina em aorta de rato, nem modificar o aumento de tais respostas observadas em consequência da exposição ao estresse.

Long-term storage and viability of Ochlerotatus albifasciatus (Diptera: Culicidae)

The viability of Ochlerotatus albifasciatus (Macquart) eggs stored at room temperature and at 5ºC was studied over 31 months. After 12, 18 and 31 months of storage, eggs were acclimatized at 22ºC for ten days, and then inundated twice every seven days. The effect of the storage period on the percentage of hatching was analyzed by one way ANOVA. Differences on the hatching response between the first and second flooding were analyzed by paired t-test. Differences on the hatching response between the two storage conditions were analyzed by Mann-Whitney rank test. Results showed that (1) Oc. albifasciatus eggs were able to survive and hatch over 31 months; (2) the percent hatching of eggs stored at 5ºC was higher than that of eggs stored at room temperature; and (3) low temperatures and long periods without water favor installment hatching.

Interactions between grain size and composition of sediments: two examples

Two contrasting case studies of sediment and detrital mineral composition are investigated in order to outline interactions between chemical composition and grain size. Modern glacial sediments exhibit a strong dependence of the two parameters due to the preferential enrichment of mafic minerals, especially biotite, in the fine-grained fractions. On the other hand, the composition of detrital heavy minerals (here: rutile) appears to be not systematically related to grain-size, but is strongly controlled by location, i.e. the petrology of the source rocks of detrital grains. This supports the use of rutile as a well-suited tracer mineral for provenance studies. The results further suggest that (i) interpretations derived from whole-rock sediment geochemistry should be flanked by grain-size observations, and (ii) a more sound statistical evaluation of these interactions require the development of new tailor-made statistical tools to deal with such so-called two-way compositions