CSR Policies: Effects on Labour Productivity in Spanish Micro and Small Manufacturing Companies

This paper analyses empirical evidence of efforts to enable Spanish micro and small manufacturing companies to boost their labour productivity rates through the development of the main pillars of their corporate social responsibility (CSR) policies. This study aims to develop new approaches and sensibilities towards work from an ethical, values (virtues) and CSR perspective, showing how internal dimensions of CSR, such those related to relationships with employees and responsibility in processes and product quality, can improve labour performance and labour efficiency, thereby contributing to a better society. The results of a sample of 929 small businesses indicate that the social responsibility policies that most contributed to a short-term increase in labour productivity are those related to internal aspects of the company, in particular its involvement in the quality of processes and products, promotion of innovation and employee care. However, the impact on labour productivity of CSR policies related to external factors, such as relationship with stakeholders and environmental concern, could not be empirically proven in this paper.

Microfabrication processes for microfluidic devices on a single laser Workstation: direct writing lithography on SU-8, laser ablation on polymers and mask manufacturing

We demonstrate the capability of a laser micromachining workstation for cost-effective manufacturing of a variety of microfluidic devices, including SU-8 microchannels on silicon wafers and 3D complex structures made on polyimide Kapton® or poly carbonate (PC). The workstation combines a KrF excimer laser at 248 nm and a Nd3+:YVO4 DPSS with a frequency tripled at 355 nm with a lens magnification 10X, both lasers working at a pulsed regime with nanoseconds (ns) pulse duration. Workstation also includes a high-resolution motorized XYZ-tilt axis (~ 1 um / axis) and a Through The Lens (TTL) imaging system for a high accurate positioning over a 120 x 120 mm working area. We have surveyed different fabrication techniques: direct writing lithography,mask manufacturing for contact lithography and polymer laser ablation for complex 3D devices, achieving width channels down to 13μ m on 50μ m SU-8 thickness using direct writing lithography, and width channels of 40 μm for polyimide on SiO2 plate. Finally, we have tested the use of some devices for capillary chips measuring the flow speed for liquids with different viscosities. As a result, we have characterized the presence of liquid in the channel by interferometric microscopy.

Tower of Santa Catalina [Material gráfico] : Valencia

Resumen: Descripción: vista de la torre de Santa Catalina

Tower of Almenara [Material gráfico]

Existe otra tirada coloreada

Tower of Almenara [Material gráfico]

Existe otra tirada sin colorear

A landscape architectural design approach:the restoration of the Angel Tower and the Cloister of the Cathedral of Cuenca.

Este artículo trata de analizar la reciente evolución de los conceptos sobre intervención en el Patrimonio Cultural. Para ello utiliza como modelo el proyecto metodológico aplicado sobre las dos últimas actuaciones efectuadas en la Catedral de Cuenca. La Carta de Atenas, 1931, que estableció las bases de la modernidad sobre las dos trayectorias de espacio y tiempo, concuerdan hoy después de casi un siglo, recuperando su punto de encuentro. El artículo básicamente valora el potencial que los proyectos contemporáneos de intervención en el patrimonio pueden ofrecer cuando estudias su trayectoria en el paisaje. En orden a certificar sus transformaciones desde la actualidad, el singular monumento de la Catedral de Cuenca, utilizado como modelo, nos aporta a través de sus materiales y morfología la memoria secular que nos informa de sus técnicas constructivas y valores sociales. Este modelo abre un diálogo entre teoría y práctica reflejado a través de los trabajos de restauración aplicados. Después de treinta años de experiencia restauradora llevada a cabo por los autores, las dos últimas intervenciones que son minuciosamente expuestas, revelan algunas nuevas estrategias de aplicación en el proyecto de intervención.

Alminar Tower, Dubai (2013)

ALGHURAIR ALMINAR. A white tower in Dubai = ALGHURAIR ALMINAR. Una torre blanca en Dubai

Telefónica Tower

A tower is proposed in the highest part of the city of Madrid, in La Moraleja, so high, so very high that one might just see the sea on a clear day. = Se propone una torre en lo más alto de Madrid, en la Moraleja, tan alta tan alta que desde ella podría verse el mar en los días claros.

Characterization of the manufacturing processes to grow triple-junction solar cells

A number of important but little-investigated problems connected with III-V/Ge heterostructure in the GaInP/GaInAs/Ge multijunction solar cells grown by MOVPE are considered in the paper. The opportunity for successfully applying the combination of reflectance and reflectance anisotropy spectroscopy in situ methods for investigating III-V structure growth on a Ge substrate has been demonstrated. Photovoltaic properties of the III-V/Ge narrow-band subcell of the triple-junction solar cells have been investigated. It has been shown that there are excess currents in the Ge photovoltaic p-n junctions, and they have the tunneling or thermotunneling character. The values of the diode parameters for these current flow mechanisms have been determined. The potential barrier at the III-V/Ge interface was determined and the origin of this barrier formation during MOVPE heterogrowth was suggested.

Tower of Martín González or castle of La Raya (Soria): territory, history, defense and construction / La torre de Martín González o castillo de La Raya (Soria): territorio, historia, defensa y construcción

Abstract The Tower of Martín González, also known as castle of La Raya, is placed in the actual border between the Spanish provinces of Soria and Zaragoza and in the historical limit between the Crowns of Castile and Aragon: this is the reason for its name. The castle dominates the hedge of the plain-moors that surround the Valley of Nágima River. It is a castle with courtyard and a high tower in the western flank. The paper analyzes the castle in four main levels. All references about the castle are studied to draw a historical narration and to relate with the territory and other fortifications, both Castilian and Aragonese. Despite its advanced state of ruin, it preserves many rests that allow making an analysis of its defensive elements and constructive aspects. Resumen La torre de Martín González, también conocida como el castillo de La Raya, se sitúa en el límite actual entre las provincias de Soria y Zaragoza y en el límite histórico entre las coronas de Castilla y Aragón. Domina el extremo de los páramos que circundan el río Nágima. Es un castillo de tipo torrejón con patio de armas y una torre del homenaje adosada a su flanco occidental. El análisis contempla cuatro niveles fundamentales para el entendimiento de la arquitectura fortificada. La comunicación revisa la documentación existente sobre los elementos históricos que se ponen en relación, mediante el análisis territorial, con el sistema fortificado de frontera. A pesar de su avanzado estado de ruina, conserva restos que permiten realizar una lectura interpretativa de sus elementos defensivos y de sus aspectos constructivos.

Rapid prototyping of multi-scale biomedical microdevices by combining additive manufacturing technologies

The possibility of designing and manufacturing biomedical microdevices with multiple length-scale geometries can help to promote special interactions both with their environment and with surrounding biological systems. These interactions aim to enhance biocompatibility and overall performance by using biomimetic approaches. In this paper, we present a design and manufacturing procedure for obtaining multi-scale biomedical microsystems based on the combination of two additive manufacturing processes: a conventional laser writer to manufacture the overall device structure, and a direct-laser writer based on two-photon polymerization to yield finer details. The process excels for its versatility, accuracy and manufacturing speed and allows for the manufacture of microsystems and implants with overall sizes up to several millimeters and with details down to sub-micrometric structures. As an application example we have focused on manufacturing a biomedical microsystem to analyze the impact of microtextured surfaces on cell motility. This process yielded a relevant increase in precision and manufacturing speed when compared with more conventional rapid prototyping procedures.

Prototype emitter for use in subsurface drip irrigation: Manufacturing, hydraulic evaluation and experimental analyses

The current research aims to analyse theoretically and evaluate a self-manufactured simple design for subsurface drip irrigation (SDI) emitter to avoid root and soil intrusion. It was composed of three concentric cylindrical elements: an elastic silicone membrane; a polyethylene tube with two holes drilled on its wall for water discharge; and a vinyl polychloride protector system to wrap the other elements. The discharge of the emitter depends on the change in the membrane diameter when it is deformed by the water pressure. The study of the operation of this emitter is a new approach that considers mechanical and hydraulic principles. Thus, the estimation on the membrane deformation was based on classical mechanical stress theories in composite cylinders. The hydraulic principles considered the solid deformation due to force based on water pressure and the general Darcy–Weisbach head-loss equation. Twenty emitter units, with the selected design, were handcrafted in a lathe and were used in this study. The measured pressure/discharge relationship for the emitters showed good agreement with that calculated by the theoretical approach. The variation coefficient of the handcrafted emitters was high compared to commercial emitters. Results from field evaluations showed variable values for the relative flow variation, water emission uniformity and relative flow rate coefficients, but no emitter was obstructed. Therefore, the current emitter design could be suitable for SDI following further studies to develop a final prototype.

Low-cost manufacturing by fused filament fabrication of microwave waveguide passive devices for space applications

Presentación en poster de impresión 3D de guias de onda.

Study of the foundations, bearing soil and stability of the minaret-tower of Cordobas Mosque

This research in Cordoba's mosque tower main objective was to analyze and characterize the foundations and the underlying soil, calculating the stability of the monument as well as the settlement and deformations performed, using traditional calculation methods and also by finite elements, and to determine differences between both, as well as the stability factor of the Minaret Tower. The works done to study the soil, were drill bores and dynamic penetration tests, classification of samples by size, Atterberg limits, physical and chemical analysis, showing the typical geotechnical composition of the Guadalquivir valley: an alluvial material composed by sand, gravels and silt clays. To study the foundations, inclined bore samples were extracted with 10-65º, showing calcarenite stone ashlars and lime concrete alternating with stone and brick masonry.

How Can Local Manufacturing Improve Economic Sustainability? Saint Brissant: a case study of local manufacturing in Spain

Fast-fashion retailers and mass production dominate the fashion and apparel industry. Increased globalization, labor intensity and outsourcing to developing countries are fostering the interest in sustainability within the industry. There is a growth of a new movement attempting to offset the demand for fast fashion, "Slow Fashion" movement. Slow fashion is not time-based but quality-based approach in which designers, buyers, retailers and consumers are more aware of the impacts on workers, communities and ecosystems (Fletcher 2007). European Union has also some critical targets to reach by 2020. Spain, specifically, has to meet some requirements in terms of economy and sustainability. This exploratory study analyzed how slow fashion concept, precisely manufacturing locally, could improve economic development. Local manufacturing, its impact on economic development and the challenges of Spanish market are illustrated through a case study of one Spanish fashion brand, Saint Brissant.