Big and beautiful: attractiveness and health ratings of the female body by male "fat admirers"

This study examined the body weight and waist-to-hip ratio (WHR) preferences of “fat admirers” (FAs), that is, individuals who are sexually attracted to heavier partners. Fifty-six heterosexual men involved in the FA community rated a series of line drawings that varied in three levels of body weight and six of WHR for physical attractiveness and health. The results showed significant main effects of body weight and WHR, as well as a significant body weight × WHR interaction for both health ratings. In general, there was a preference for heavyweight figures and high WHRs for ratings of attractiveness and normal-weight figures and mid-ranging WHRs for ratings of health. Limitations of the study and explanations for fat admiration are discussed.

Akkermansia muciniphila and improved metabolic health during a dietary intervention in obesity: relationship with gut microbiome richness and ecology

Objective: Individuals with obesity and type 2 diabetes differ from lean and healthy individuals in their abundance of certain gut microbial species and microbial gene richness. Abundance of Akkermansia muciniphila, a mucin-degrading bacterium, has been inversely associated with bodyfat mass and glucose intolerance in mice, but more evidence is needed in humans. The impact of diet and weight loss on this bacterial species is unknown. Our objective was to evaluate the association between fecal A. muciniphila abundance, fecal microbiome gene richness, diet, host characteristics, and their changes after calorie restriction (CR). Design: The intervention consisted of a 6-week CR period followed by a 6-week weight stabilization (WS) diet in overweight and obese adults (N=49, including 41 women). Fecal A. muciniphila abundance, fecal microbial gene richness, diet and bioclinical parameters were measured at baseline and after CR and WS. Results: At baseline A. muciniphila was inversely related to fasting glucose, waist-to-hip ratio, and subcutaneous adipocyte diameter. Subjects with higher gene richness and A. muciniphila abundance exhibited the healthiest metabolic status, particularly in fasting plasma glucose, plasma triglycerides and body fat distribution. Individuals with higher baseline A. muciniphila displayed greater improvement in insulin sensitivity markers and other clinical parameters after CR. A. muciniphila was associated with microbial species known to be related to health. Conclusion: A. muciniphila is associated with a healthier metabolic status and better clinicaloutcomes after CR in overweight/obese adults, however the interaction between gut microbiota ecology and A. muciniphila has to be taken into account.

A case-control study of the health and wellbeing benefits of allotment gardening

Background - Allotments in the UK are popular and waiting lists long. There is, however, little evidence on the health benefits of allotment gardening. The aims of this study were to determine the impacts of a session of allotment gardening on self-esteem and mood and to compare the mental well-being of allotment gardeners with non-gardeners. Methods - Self-esteem, mood and general health were measured in 136 allotment gardeners pre- and post- an allotment session, and 133 non-gardener controls. Allotment gardeners also detailed the time spent on their allotment in the current session and previous 7 days, and their length of tenure. Results - Paired t-tests revealed a significant improvement in self-esteem (P < 0.05) and mood (P < 0.001) as a result of one allotment session. Linear regression revealed that neither the time spent on the allotment in the current session, the previous 7 days or the length of tenure affected the impacts on self-esteem and mood (P > 0.05). One-way ANCOVA revealed that allotment gardeners had a significantly better self-esteem, total mood disturbance and general health (P < 0.001), experiencing less depression and fatigue and more vigour (P < 0.0083). Conclusions - Allotment gardening can play a key role in promoting mental well-being and could be used as a preventive health measure

How women use and experience western herbal practice for distress: implications for health care and self-management approaches.

Introduction: In the UK, common mental health disorders account for one in five of all work days lost, and cost employers £25bn each year. Herbal medicine has been shown to potentially be of use for mental distress, including conditions like anxiety. In 2008, 35% of British adults surveyed claimed to have used herbal medicine at some stage, the majority of whom were women. However, there is little research into how the users of western herbal medicine (WHM) experience the practice of herbal medicine, or how these experiences may change over time. Our research is studying women in the south-east of the UK who are suffering from distress (either as a primary complaint, or associated with another condition) who are seeking the services of a herbalist who practices WHM. Aim: To investigate the experiences of western herbal practice by women who are suffering with distress. Methods: The study is using semi-structured interviews of around thirty women, to elicit patient narratives at two time points. Thematic analysis is being used to consider how distressed women perceive and experience their distress, their reasons for using WHM, what contribution the women perceive the consultation and treatment with WHM may or may not make to their wellbeing, and whether their experiences change over time. Currently, sixteen women have been interviewed, and a preliminary thematic analysis has commenced. Results: Preliminary finding suggest that not only do women internalise their distress, but that they are surprisingly isolated in how they deal with it, whilst some also express social embarrassment about their experiences. The women perceived that their distress is not always considered seriously from their medical practitioners’ point of view. These women are drawn to herbalists not only in a search for effective treatment, but also to be given time to have their story heard, to form a collaborative relationship, and to attempt to regain some control of their life. The herbal treatment is valued due to its perceived naturalness, and reduced risk of adverse side effects. Nevertheless, WHM is just one of a number of self-care strategies that women utilise to help manage their distress. Discussion: Effective treatment is not only dependent upon the herbs, but also upon an effective therapeutic relationship. Feeling that the herbalist hears their story, provides a treatment plan that is individually tailored to the patient, and is available (even outside of the consultation) are all important in helping to establish this relationship.

Nanoparticles based Permeable Reactive Barriers as an Eco-efficient Technology for nitrate remediation in soil and groundwater

The need to increase agricultural yield led, among others, to an increase in the consumption of nitrogen based fertilizers. As a consequence, there are excessive concentrations of nitrates, the most abundant of the reactive nitrogen (Nr) species, in several areas of the world. The demographic changes and projected population growth for the next decades, and the economic shifts which are already shaping the near future are powerful drivers for a further intensification in the use of fertilizers, with a predicted increase of the nitrogen loads in soils. Nitrate easily diffuses in the subsurface environments, portraying high mobility in soils. Moreover, the presence of high nitrate loads in water has the potential to cause an array of health dysfunctions, such as methemoglobinemia and several cancers. Permeable Reactive Barriers (PRB) placed strategically relatively to the nitrate source constitute an effective technology to tackle nitrate pollution. Ergo, PRB avoid various adverse impacts resulting from the displacement of reactive nitrogen downstream along water bodies. A four stages literature review was carried out in 34 databases. Initially, a set of pertinent key words were identified to perform the initial databases searches. Then, the synonyms of those initial key words were used to carry out a second set of databases searches. The third stage comprised the identification of other additional relevant terms from the research papers identified in the previous two stages. Again, databases searches were performed with this third set of key words. The final step consisted of the identification of relevant papers from the bibliography of the relevant papers identified in the previous three stages of the literature review process. The set of papers identified as relevant for in-depth analysis were assessed considering a set of relevant characterization variables.

E-Health individual adoption - empirical model based on UTAUT 2.

The future of health care delivery is becoming more citizen-centred, as today’s user is more active, better informed and more demanding. The European Commission is promoting online health services and, therefore, member states will need to boost deployment and use of online services. This makes e-health adoption an important field to be studied and understood. This study applied the extended unified theory of acceptance and usage technology (UTAUT2) to explain patients’ individual adoption of e-health. An online questionnaire was administrated Portugal using mostly the same instrument used in UTAUT2 adapted to e-health context. We collected 386 valid answers. Performance expectancy, effort expectancy, social influence, and habit had the most significant explanatory power over behavioural intention and habit and behavioural intention over technology use. The model explained 52% of the variance in behavioural intention and 32% of the variance in technology use. Our research helps to understand the desired technology characteristics of ehealth. By testing an information technology acceptance model, we are able to determine what is more valued by patients when it comes to deciding whether to adopt e-health systems or not.

An exploratory descriptive study of factors influencing students to seek or not to seek personal counselling on a college of applied arts and technology campus located in Southern Ontario /

This descriptive-exploratory study examined factors which were perceived by students at a College of Applied Arts and Technology (CAAT) campus as influencing them in choosing to come or not to come for personal counselling and why they would or would not retum. A total of 250 students selected through a sample of convenience were surveyed. A questionnaire survey was conducted with quantitative data collected using a 4-point, forced-choice Likert scale and yes/no questions and qualitative data collected using open-ended questions and invited comments. The responses were analyzed using means and modes for the Likert responses and percentages for the yes/no and check-off questions. The narrative responses were subjected to content analysis to identify themes. The mean score findings on factors influencing students to come for personal counselling were at or close to the mid- point of 2.5. Personal distress was the only variable found to have a negative response, meaning students would not come to counselling if they were in personal distress. On factors that would keep them from choosing to come to counselling, students seemed to trust counsellors and feel accepted by them and rejected the notion that peer pressure or the first session being unhelpful would keep them away from counselling. The counsellor's relationship with the student is the major determinant for repeat sessions. When asked what factors would influence students to not retum for personal counselling, students rejected the variables of peer pressure, the extra time needed for counselling, and not getting what they wanted in a session, but, in one instance, indicated that variables regarding the counselling relationship would keep them from returning.

Investigation of femtosecond laser technology for the fabrication of drug nanocrystals in suspension

La technique du laser femtoseconde (fs) a été précédemment utilisée pour la production de nanoparticules d'or dans un environnement aqueux biologiquement compatible. Au cours de ce travail de maîtrise, cette méthode a été investiguée en vue d'une application pour la fabrication de nanocristaux de médicament en utilisant le paclitaxel comme modèle. Deux procédés distincts de cette technologie à savoir l'ablation et la fragmentation ont été étudiés. L'influence de la puissance du laser, de point de focalisation, et de la durée du traitement sur la distribution de taille des particules obtenues ainsi que leur intégrité chimique a été évaluée. Les paramètres ont ainsi été optimisés pour la fabrication des nanoparticules. L’évaluation morphologique et chimique a été réalisée par microscopie électronique et spectroscopie infrarouge respectivement. L'état cristallin des nanoparticules de paclitaxel a été caractérisé par calorimétrie differentielle et diffraction des rayons X. L'optimisation du procédé de production de nanoparticules par laser fs a permis d'obtenir des nanocristaux de taille moyenne (400 nm, polydispersité ≤ 0,3). Cependant une dégradation non négligeable a été observée. La cristallinité du médicament a été maintenue durant la procédure de réduction de taille, mais le paclitaxel anhydre a été transformé en une forme hydratée. Les résultats de cette étude suggèrent que le laser fs peut générer des nanocristaux de principe actif. Cependant cette technique peut se révéler problématique pour des médicaments sensibles à la dégradation. Grâce à sa facilité d'utilisation et la possibilité de travailler avec des quantités restreintes de produit, le laser fs pourrait représenter une alternative valable pour la production de nanoparticules de médicaments peu solubles lors des phases initiales de développement préclinique. Mots-clés: paclitaxel, nanocristaux, laser femtoseconde, ablation, fragmentation

Technology adoption among Canadian dentists

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal.

A portal for the Canadian Virtual Health Library / Bibliothèque virtuelle canadienne de la santé (CVHL/BVCS): Accomplishments and possibilities, scope and structure - a review of best practices

Introduction: Coordination through CVHL/BVCS gives Canadian health libraries access to information technology they could not offer individually, thereby enhancing the library services offered to Canadian health professionals. An example is the portal being developed. Portal best practices are of increasing interest (usability.gov; Wikipedia portals; JISC subject portal project; Stanford clinical portals) but conclusive research is not yet available. This paper will identify best practices for a portal bringing together knowledge for Canadian health professionals supported through a network of libraries. Description: The portal for Canadian health professionals will include capabilities such as: • Authentication • Question referral • Specialist “branch libraries” • Integration of commercial resources, web resources and health systems data • Cross-resource search engine • Infrastructure to enable links from EHR and decision support systems • Knowledge translation tools, such as highlighting of best evidence Best practices will be determined by studying the capabilities of existing portals, including consortia/networks and individual institutions, and through a literature review. Outcomes: Best practices in portals will be reviewed. The collaboratively developed Virtual Library, currently the heart of cvhl.ca, is a unique database collecting high quality, free web documents and sites relevant to Canadian health care. The evident strengths of the Virtual Library will be discussed in light of best practices. Discussion: Identification of best practices will support cost-benefit analysis of options and provide direction for CVHL/BVCS. Open discussion with stakeholders (libraries and professionals) informed by this review will lead to adoption of the best technical solutions supporting Canadian health libraries and their users.

Intellectual Property Protection For Plant Derived Vaccine Technology: Here They Come Are We Ready or Not ?

Il existe une nouvelle catégorie de technologie, les vaccins dérivés de plantes («VDPs»), qui englobe des produits qui ont un grand potentiel pour l’amélioration de la santé à l’échelle globale. Bien qu’ils ne soient pas encore disponibles pour le public, le développement des VDPs a progressé de façon telle qu’ils devraient être prêts à être mis en marché et distribués sous peu. Ainsi, c’est le moment idéal pour lancer un débat sur la meilleure façon de protéger cette nouvelle catégorie de technologie. Vu leur nature, les VDPs ne se qualifient pas parfaitement pour aucune forme de protection de propriété intellectuelle. En effet, un VDP est à la fois une variété de plante, une biotechnologie, un médicament et un produit qui vise spécifiquement les besoins de pays en voie de développement. Chacune de ces caractéristiques soulève ses propres problématiques en ce qui a trait à la propriété intellectuelle. C’est pourquoi il appert difficile d’identifier la forme de protection la plus adéquate et appropriée pour les VDPs. Cet article traite de la nature d’un VDP, des différentes catégories dans lesquelles il pourrait être classé, des différents types de systèmes de protection de propriété intellectuelle auxquels il pourrait être éligible ainsi que des problèmes qui pourraient être soulevés par tous ces éléments. Ces discussions visent à mettre l’accent sur le fait que nous avons affaire à une toute nouvelle catégorie d’innovation technologique. L’auteure est donc d’avis qu’une approche proactive est nécessaire pour discuter d’un système de protection de propriété intellectuelle en relation avec les VDPs. En ce moment, c’est l’inventeur qui choisi comment il protègera son invention. Les moyens employés par ce dernier pourraient être subséquemment modifiés ou annulés par une décision judiciaire mais comme plusieurs autres inventeurs d’une même catégorie de technologie auront probablement déjà adopté une stratégie de protection similaire, ce type de mesures judiciaire, très tard dans le processus, pourra avoir des résultats néfastes sur les détenteurs de droits. Le développement de lignes directrices d’entrée de jeu, avec l’aide d’un panel d’experts de préférence, peut contribuer à éviter les situations de confusion qui ont déjà été vécues avec l’application d’autres nouvelles technologies et qui devraient servir de leçon pour l’encadrement des VDPs.

Validité, fiabilité et reproductibilité des modèles digitaux obtenus avec iTero (Align Technology) et Unitek TMP Digital (3M) en comparaison avec les modèles de plâtre

Objectif: L'objectif primaire de cette étude était d'évaluer la validité, la fiabilité et la reproductibilité des mesures dentaires obtenues sur les modèles digitaux iTero (Align Technology, San Jose, Californie) et Unitek TMP Digital (3M, Monrovia, Californie) en comparaison avec celles obtenues sur les modèles de plâtre (gold standard). L'objectif secondaire était de comparer les deux différents matériaux à empreinte (l'alginate et le polyvinylsiloxane-PVS) afin de déterminer si le choix du matériau affectait la précision des mesures. Méthodes: Le premier volet de l'étude impliquait les modèles digitaux Unitek et iTero, obtenus à partir de 25 paires de modèles de plâtre choisis de façon randomisée et provenant de la pratique privée d'un des co-auteurs. Des empreintes d'alginate et de PVS ont été prises sur les modèles de plâtre et numérisées par le scanner Unitek. Les modèles ont ensuite été numérisés avec le scanner iTero. Le deuxième volet de l'étude cherchait à comparer les modèles digitaux iTero (numérisation intra-orale) avec les modèles de plâtre (empreintes d'alginate et de PVS) obtenus à partir de 25 patients de la clinique d'orthodontie de l'Université de Montréal ayant besoin d'un traitement orthodontique. Dans les deux volets de l'étude, deux auteurs ont pris les mesures suivantes sur les différents modèles: largeur mésio-distale de chaque dent de la première molaire à l'autre première molaire, le périmètre d'arcade, les distances intermolaire et intercanine, le surplomb vertical et le surplomb horizontal. Les ratios et excès Bolton 6 et 12, l'espace requis et les différentiels d'espace au maxillaire et à la mandibule, ont été calculés. Résultats: La fiabilité (ICC) entre les modèles digitaux (Unitek et iTero) et les modèles de plâtre était bonne à excellente pour toutes les mesures [ICC=0,762–0,998], et la fiabilité entre les deux matériaux à empreinte était excellente [ICC=0,947–0,996]. Dans les deux volets de l'étude, les mesures faites sur les modèles iTero étaient généralement plus grandes que celles faites sur les modèles de plâtre. Les plus grandes différences moyennes pour la comparaison iTero-plâtre étaient trouvées au niveau de l'espace disponible au maxillaire et à la mandibule (systématiquement plus grande pour cette variable), soit 2,24 mm et 2,02 mm respectivement dans le premier volet, et 1,17 mm et 1,39 mm respectivement dans le deuxième volet. Les différences étaient considérées cliniquement non significatives pour toutes les variables. La reproductibilité intra-examinateur était bonne à excellente pour les modèles de plâtre et les modèles digitaux, à l'exception du différentiel d'espace à la mandibule pour les modèles Unitek [ICC=0,690-0,692]. La reproductibilité inter-examinateur était bonne à excellente pour les modèles de plâtre et les modèles digitaux dans les deux volets de l'étude, mais acceptable à modérée pour les modèles Unitek au niveau des analyses Bolton 6 et 12, et des différentiels d'espace au maxillaire et à la mandibule [ICC=0,362-0,548]. Conclusions: La précision et la fiabilité des mesures dentaires faites sur les modèles digitaux Unitek et iTero étaient cliniquement acceptables et reproductibles en comparaison avec les celles faites sur les modèles de plâtre. Le choix de matériel à empreinte entre l'alginate et le PVS n'affectait pas la précision des mesures. Cette étude semble démontrer que les modèles digitaux Unitek et iTero, utilisés avec leur logiciel respectif, sont une alternative fiable et reproductible aux modèles de plâtre pour le diagnostic et l’analyse des modèles orthodontiques.

Bioprocess Technology for Antagonistic Pseudomonas MCCB 102, 103,Micrococcus MCCB 104, and Evaluation of Synechocystis MCCB 114, 115 as Probiotics for the Management of Vibrio in Shrimp Culture Systems

National Centre for Aquatic Animal Health, School of Environmental Studies, Cochin University of Science and Technology

An evaluation of Primary health care system in Kerala

The thesis entitled An Evaluation of Primary Health Care System in Kerala. The present study is intended to examine the working of primary health care system and its impact on the health status of people. The hypothesis tested in the thesis includes, a. The changes in the health profile require reallocation of resources of primary health care system, b. Rate of utilization depends on the quality of services provided by primary health centers, and c. There is a significant decline in the operational efficiency of the primary health care system. The major elements of primary health care stated in the report of AlmaAta International Conference on Primary Health Care (WHO, 1994)” is studied on the basis of the classification of the elements in to three: Preventive, Promotive, and Curative measures. Preventive measures include Maternal and Child Health Care including family Planning. Provision of water and sanitation is reviewed under promotive measures. Curative measures are studied using the disease profile of the study area. Collection of primary data was done through a sample survey, using pre-tested interview schedule of households of the study area. Multi stage random sampling design was used for selecting the sample. The design of the present study is both descriptive and analytical in nature. As far as the analytical tools are concerned, growth index, percentages, ratios, rates, time series analysis, analysis of variance, chi square test, Z test were used for analyzing the data. Present study revealed that no one in these areas was covered under any type of health insurance. Conclusion states that considering the present changes in the health profile, traditional pattern of resource allocation should be altered to meet the urgent health care needs of the people. Preventive and promotive measures like health education for giving awareness among people to change health habits, diet pattern, life style etc. are to be developed. Proper diagnosis and treatment of the disease at the beginning of the stage itself may help to cure majority of disease. For that, Public health policy must ensure the primary health care as enunciated at Alma- Ata international Conference. At the same time Public health is not to be treated as the sole responsibility of the government. Active community participation is an essential means to attain the goals.