Os argumentos transcendentais: kant e o problema de hume

This work whose title is "The transcendental arguments: Kant Andy Hume's problem" has as its main objective to interpret Kant's answer to Hume's problem in the light of the conjunction of the causality and induction themes which is equivalent to skeptical- naturalist reading of the latter. In this sense, this initiative complements the previous treatment seen in our dissertation, where the same issue had been discussed from a merely skeptical reading that Kant got from Hume thought and was only examined causality. Among the specific objectives, we list the following: a) critical philosophy fulfills three basic functions, a founding, one negative and one would argue that the practical use of reason, here named as defensive b) the Kantian solution of Hume's problem in the first critisism would fulfill its founding and negative functions of critique of reason; c) the Kantian treatment of the theme of induction in other criticisms would will fulfill the defense function of critique of reason; d) that the evidence of Kant's answer to Hume's problem are more consistent when will be satisfied these three functions or moments of criticism. The basic structure of the work consists of three parts: the first the genesis of Hume's problem - our intention is to reconstruct Hume's problem, analyzing it from the perspective of two definitions of cause, where the dilution of the first definition in the second match the reduction of psychological knowledge to the probability of following the called naturalization of causal relations; whereas in the second - Legality and Causality - it is stated that when considering Hume in the skeptic-naturalist option, Kant is not entitled to respond by transcendental argument A􀁴B; A⊢B from the second Analogy, evidence that is rooted in the position of contemporary thinkers, such as Strawson and Allison; in third part - Purpose and Induction - admits that Kant responds to Hume on the level of regulative reason use, although the development of this test exceeds the limits of the founding function of criticism. And this is articulated in both the Introduction and Concluding Remarks by meeting the defensive [and negative] function of criticism. In this context, based on the use of so-called transcendental arguments that project throughout the critical trilogy, we provide solution to a recurring issue that recurs at several points in our submission and concerning to the "existence and / or the necessity of empirical causal laws. In this light, our thesis is that transcendental arguments are only an apodictic solution to the Hume s skeptical-naturalist problem when is at stake a practical project in which the interest of reason is ensured, as will, in short, proved in our final considerations

Efeito da concentração do amido de milho na liberação de paracetamol de comprimidos

Este trabalho avaliou a influência da concentração de amido de milho nas características físicas e na liberação in vitro de paracetamol a partir de comprimidos. Os granulados foram analisados quanto à granulometria e densidades aparentes bruta e compactada e os comprimidos quanto ao peso médio, espessura, dureza, friabilidade, tempo de desintegração. Os comprimidos foram preparados a partir de granulados obtidos por granulação a úmido, utilizando cozimento de amido a 10% como agente granulante, segundo três formulações. Embora os comprimidos obtidos tenham apresentado características dentro dos limites farmacopéicos, os resultados indicam que variações da concentração de amido provocam diferenças nos diversos parâmetros físicos estudados. Concentração mais alta de amido em pó dá origem, provavelmente, à interação entre os componentes da fórmula, interferindo na liberação in vitro do fármaco. Isto demonstra a importância de se otimizar a concentração dos adjuvantes numa formulação de comprimidos, pois, embora uma pequena variação nesta concentração não exerça efeito significativo no tempo de desintegração, a quantidade de fármaco liberado pode ser substancialmente alterada.

Structural and optical properties of CaTiO3 perovskite-based materials obtained by microwave-assisted hydrothermal synthesis: An experimental and theoretical insight

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Energy education: breaking up the rational energy use barriers

Human development is associated directly or indirectly with the energy use, and because of this the energetic sources were dealt with in the recent past, as fully available to human necessities. The reality shows that the energy availability, considering the nonrenewable sources, is limited, and beyond that, the exploration, the processing and the use of energy impose considerable impacts on the environment. There is not a system which operates with no losses and without imposing changes to the environment. Therefore, the energy conservation incorporates the concepts and the actions applied to the research of sustainable balance between nature and the energy availability and use. Such actions can be presented both in the short term, in which the energy system is close to a collapse, or in the medium/long term, in which those responsible for the energy policies are concerned with the structure of the socioeconomic development. Such a situation requires more responsibility in the treatment of energy questions, mainly through education, which represents long-term investments. This paper discusses barriers that are present in the projects applied to energy conservation, by making clear that education is one of the best ways to transform the human behavior in for the rational use of energy. (C) 2003 Elsevier B.V. Ltd. All rights reserved.

Produtividade fabril I: método para rápido aumento da produtividade fabril

O método para rápido aumento da produtividade fabril, aplicável principalmente à indústria brasileira de manufatura (17% do PIB), fundamenta-se exclusivamente na redução ou eliminação do tempo inativo do homem, da máquina e do material, que é a grande causa da ineficiência. O método exige a utilização de apenas cinco das mais simples, elementares e conhecidas técnicas e é aplicável às vinte situações mais freqüentes (objetos de estudo) na indústria de manufatura. Nossa experiência atesta que o método é capaz de aumentar a produtividade fabril em valor superior a 30%, em poucos meses e de forma perene (houve um caso de aumento de 160% em toda uma seção de usinagem de uma empresa multinacional). Sua aplicação e a implantação das medidas dele decorrentes são feitas com extrema facilidade e, por isto, os resultados surgem muito rapidamente. Atinge portanto seu objetivo: proporcionar aumento da produtividade fabril em curto espaço de tempo. Os demais artigos da série detalharão os objetos de estudo.

Produtividade fabril II - método para rápido aumento da produtividade fabril: redução de esperas dentro do ciclo da operação

O método para rápido aumento da produtividade fabril, aplicável principalmente à indústria brasileira de manufatura (17% do PIB), fundamenta-se exclusivamente na redução ou eliminação do tempo inativo do homem, da máquina e do material, que é a grande causa da ineficiência. O método exige a utilização de apenas cinco das mais simples, elementares e conhecidas técnicas e é aplicável às vinte situações mais freqüentes (objetos de estudo) na indústria de manufatura. Nossa experiência atesta que o método é capaz de aumentar a produtividade fabril em valor superior a 30%, em poucos meses e de forma perene (houve um caso de aumento de 160% em toda uma seção de usinagem de uma empresa multinacional). Sua aplicação e a implantação das medidas dele decorrentes são feitas com extrema facilidade e, por isto, os resultados surgem muito rapidamente. Atinge portanto seu objetivo: proporcionar aumento da produtividade fabril em curto espaço de tempo. Este artigo detalhará sete objetos de estudo (situações): 1.redução da espera da máquina durante as inspeções; 2.redução da espera do operário, abordando trabalho em equipe, produção em linha e operação com ajudante; e 3.redução da espera do operador de máquina, por meio da diminuição do tempo-máquina, do controle do tempo-máquina e da atribuição de outras atividades ao operador pela adoção da célula de manufatura.

Produtividade fabril III - método para rápido aumento da produtividade fabril: redução de tempos inativos e do tempo de espera do material em processo

O método para rápido aumento da produtividade fabril, aplicável principalmente à indústria brasileira de manufatura (17% do PIB), fundamenta-se exclusivamente na redução ou eliminação do tempo inativo do homem, da máquina e do material, que é a grande causa da ineficiência. O método exige a utilização de apenas cinco das mais simples, elementares e conhecidas técnicas e é aplicável às vinte situações mais freqüentes (objetos de estudo) na indústria de manufatura. Nossa experiência atesta que o método pode proporcionar à produtividade fabril um aumento superior a 30%, em poucos meses e de forma perene. Sua aplicação e a implantação das medidas dele decorrentes são feitas com extrema facilidade e, por isto, os resultados surgem muito rapidamente. Atinge portanto seu objetivo: proporcionar aumento da produtividade fabril em curto espaço de tempo. Este artigo (terceiro e último da série) detalhará doze objetos de estudo (situações): 1. redução dos tempos inativos causados por troca de turno, por refeição e por troca de produtos; 2. redução dos tempos improdutivos acarretados por causas mais importantes, por espera pelo serviço de manutenção, por espera pelo serviço de preparação, por espera pelo operador e por causas não apontáveis pelos procedimentos usuais; 3. redução das atividades improdutivas e das produtivas executadas num ritmo improdutivo; e 4. redução do tempo de espera do material em processamento pela redução do tamanho do lote de fabricação e pelo aumento da velocidade de manufatura.

UV exposure of polymeric geomembranes

The break of polymer chemical bonds may occur due to penetration of sun short wavelengths. In sanitary landfills for instance, ultraviolet radiation affects uncovered materials and can be dangerous during the installation of the liner and before the placement of the waste. Only the ultraviolet part of the light is harmful to the geosynthetic materials, moreover, each material is sensitive to a particular wavelength. This article evaluates the effects of UV degradation and condensation in black HDPE (1.0 and 1.5 mm) and white HDPE (textured - 1.0 mm) geomembrane that were tested in laboratory during 6 months. The tests were performed using a weatherometer assembled at EESC-USP in accordance to ASTM G154. The results have shown variations in punction and tear resistance after each period of exposure.

Reactive Control for Transmission Overload Relief Based on Sensitivity Analysis and Cooperative Game Theory

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Contribuições para a detecção e identificação de faltas em inversores Multiníveis

This work presents contributions in the detection and identication of faults in multilevel inverters through the study of the converters behavior under these operation conditions. Basically, the approached fault consists of an open-circuit in any switch of a three-level clamped diode inverter. The converter operation is characterized in the pre and post-fault states. A wave form behavior analysis of the pole voltage, phase current and dc-bus current is also done, which highlights characteristics that allow the detection of failure and, even, under favorable conditions, the identication of the faulty device. A compensation strategy of the approached fault (open-switch) is also investigated with the purpose of maintaining the driving system operational when a failure occurs. The proposed topology uses SCRs in parallel with the internal switches of the inverter, which allows, in some occasions, the full utilization of the dc-bus

Análise de risco à erosão costeira na região de Tibau do Sul/RN através de mapeamento geoambiental e análise morfodinâmica

The research area is located on the county of Tibau do Sul, in the east coast of Rio Grande do Norte State, about 80km south of the capital Natal. The tourism represents the main income activity and Pipa beach is the most visited beach in the city, annually receives a large influx of domestic and foreign tourists. Some recent studies have reported the occurrence of coastal erosion in this littoral, being the main objective of the research, analyze the existing coastal erosion, through two methodologies, the geoenvironmental mapping and beach morphodynamics. The geoenvironmental mapping was done from oblique aerial photographs and field visits, which sought to carry out first the geomorphological mapping, with the purpose of analyzing features that suggest susceptible areas to erosion, as areas without protection of natural dunes, marine terraces, or sandstones (beach-rocks and ferruginous sandstones), areas with the presence of gullies and stretches where the sea-cliffs were in direct contact with the action of the sea, representing the beginning of the beach profile. In the morphodynamic study sought to carry out the survey of the physical and morphological characteristics, the analysis of sediment grain of the beaches and finally the analysis of the morphodynamic parameters to generate a table of risk to erosion by sector of the beach. The morphodynamic parameters were defined by the methodology proposed by Short (2006), in which considers different patterns of dynamism on beaches with characteristics favorable and unfavorable to erosive profiles. The maps indicated different levels of risk to the segments of the beaches analyzed, suggesting risk to erosion low and low to moderate only in areas north and northwest of the beaches of Madeiro and Curral, and levels of moderate and high risk sectors in the south and southeast of these beaches . The beach of Pipa showed moderate levels of risk and moderate to high at the ends and high risk to erosion in the central portion. The study of the coastal environment, its morphological evolution, and areas with problems of erosion, are of fundamental importance to assist coastal management policies, giving grants for planning activities undertaken in these regions

O Circuito espacial de produção do biodiesel: configuração no território brasileiro e uso do território Norte-Rio-Grandense

This research aims to understand the use of the territory from the Rio Grande do Norte to the circuit spatial of production from the Biodiesel understanding it as part of the national context. The introduction of biodiesel into the Brazilian energy matrix begins to take shape in the year 2005 with the implementation of the National Program for Production and Use of Biodiesel (NPPB). This is anchored on three pillars: social inclusion (through family agriculture), environmental sustainability and economic viability. The NPPB consists of a set of standards, which turned into shares and distributed by almost all the national territory. Our reflection assumes that the places accommodating different forms of productive activities and, thus, the performance of the circuit space of biodiesel production depends on several factors, including the configuration of the territory they receive this new nexus economic. Understanding that the places by their technical content determine the realization of productive activities, it was found that the inclusion of this circuit space production in Rio Grande do Norte, reveals the reality expressed in the national territory, where some places are endowed with a privileged technical content and other extremely poor infrastructure. As our research could confirm the circuit space of biodiesel production that is expressed in the way plants are distributed within the country (mostly in South-Central), in more significant participation of small farmers in the South in the supply of raw material for the production of biodiesel and the main raw material used for the production of agrofuels (soybeans, whose production sector is highly consolidated and technified). Already the project materialization of NPPB regarding the settlements and communities of the Rio Grande do Norte State, we observed that the "event" or advent of realization encountered a technical means lacking in infrastructure that need to be molded to the needs of production, or is to cultivate castor beans or sunflower would be needed inputs and implements that farmers don´t have. Given the above, the research concludes that, as proposed previously, the use of the territory of Rio Grande do Norte to this circuit has summarized the performance of experiments, either with regard to the participation of family farmers as suppliers of raw materials, including the development of related research in the stage of production fuel oil by Petrobras. This finding came from research done from the concept of "spatial circuits of production," which allowed the verification of the circuit that steps outlined in Potiguar territory. Regarding the inclusion of family farmers in the productive circuit in RN, research reveals that, in the manner as has been done, it is doomed to failure. Furthermore, we dare say that this persistence in trying to put these family farmers, the way is being made, and the resulting successive failures, indicating that social inclusion advocated by NPPB not take place, and that this production circuit relies on the same logic circuit concentrated and exclusive space for ethanol production

Strategic supplementation of calcium salts of polyunsaturated fatty acids to enhance reproductive performance of Bos indicus beef cows

Five experiments evaluated the effects of supplemental Ca salts of PUFA on reproductive function of Bos indicus beef cows. In Exp. 1, nonlactating and multiparous grazing cows (n = 51) were assigned to receive (as-fed basis) 0.1 kg of a protein-mineral mix + 0.1 kg of ground corn per cow/d, in addition to 0.1 kg per cow/d of 1) Ca salts of PUFA (PF), 2) Ca salts of SFA (SF), or 3) kaolin (control). Treatments were offered from d 0 to 20 of the estrous cycle. No treatment effects were detected on serum progesterone concentrations (P = 0.83), day of luteolysis (P = 0.86), or incidence of short cycles (P = 0.84). In Exp. 2, nonlactating and multiparous grazing cows (n = 43) were assigned to receive PF, SF, or control from d 0 to 8 of the estrous cycle. on d 6, all cows received (intramuscularly) 25 mg of PGF(2 alpha). No treatment effects were detected on serum progesterone concentrations on d 6 (P = 0.37), and incidence (P = 0.67) or estimated time of luteolysis (P = 0.44). In Exp. 3, twenty-seven lactating and multiparous grazing cows, approximately 30 to 40 d postpartum, were assigned to receive PF or control for 10 d beginning at the first postpartum ovulation. No treatment effects were detected (P = 0.85) on incidence of short cycles. In Exp. 4, lactating and multiparous grazing cows (n = 1,454), approximately 40 to 60 d postpartum, were assigned to receive 1 of the 7 treatments for 28 d after timed AI (TAI; d 0): 1) control from d 0 to 28, 2) SF from d 0 to 14 and then control, 3) PF from d 0 to 14 and then control, 4) SF from d 0 to 21 and then control, 5) PF from d 0 to 21 and then control, 6) SF from d 0 to 28, and 7) PF from d 0 to 28. Cows receiving PF for more than 21 d after TAI had greater (P < 0.01) pregnancy to TAI compared with all other treatments combined (50.4 vs. 42.4%, respectively). In Exp. 5, lactating and multiparous grazing cows (n = 501), approximately 40 to 60 d postpartum, were assigned to receive 1 of the 4 treatments for 21 d after TAI (d 0): 1) PF from d 0 to 14 and then control, 2) control from d 0 to 6 and then PF, 3) control from d 0 to 13 and then PF, and 4) PF from d 0 to 21. Cows receiving PF after d 14 of the experiment had greater (P = 0.02) pregnancy to TAI compared with cows not receiving PF during the same period (46.8 vs. 33.1%, respectively). In summary, supplemental Ca salts of PUFA during the expected time of luteolysis increased pregnancy to TAI in beef cows.

Polimorfismo floral em Valeriana scandens L. (Valerianaceae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Degradation of the surface of a metasilicate glass due to atmosphere moisture

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)