Discrimination of AE Signals From Friction and Concrete Cracking in a Reinforced Concrete Frame Subjected to Seismic Trainings

This paper shows the preliminary results of the development and application of a procedure to filter the Acoustic Emission (AE) signals to distinguish between AE signals coming from friction and AE signals coming from concrete cracking. These signals were recorded during the trainings of an experiment carried out on a reinforced concrete frame subjected to dynamic loadings with the shaking table of the University of Granada (Spain). Discrimination between friction and cracking AE signals is the base to develop a successful procedure and damage index based on AE testing for health monitoring of RC structures subjected to earthquakes.

Morphology and distribution of volcanic bombs in Caldera Quemada de Arriba (Lanzarote, Canary Islands): implications for volcanic hazard analysis

Análisis del riesgo volcánico. We show the preliminary results of the study of 561 volcanic bombs ejected from a pyroclastic cone during the 1730-1736 Timanfaya eruption (Lanzarote, Canary Islands). This cone displays the highest concentration of big bombs (major axis higher than 1 m) of Timanfaya. More than 560 bombs have been studied to calculate their reach. The results suggest that bombs of 1t have a reach of 409 m, while bombs up to 28 t have a reach of 248 m. These data may be used to define a security area once a vent has been opened, but also to calculate other data such the initial velocity of ejection. The geomorphological analysis and the study of the deposits also contribute to better understand an undocumented episode of the Timanfaya eruption and also provide important data for volcanic bombs modeling for volcanic hazard analysis.

Typological/Placement possibilities and limitations of ductile behavior of bridges in seismic areas

Consideraciones sobre la ductilidad en zonas sísmicas. This paper analyses the ductile behavior of a highway overpass located in a seismic zone. The paper presents the results of a pushover analysis that enables the design engineer to estimate the behavior of the bridge’s columns in two directions in an independent manner. The differences with the theoretical bilinear behavior are described and explained. Indications are given on the need and possibilities of taking advantage of ductility in different seismic events scenarios.

Dendrogeomorphological research applied to flood hazard analysis in the Caldera de Taburiente National Park (La Palma, Canary Islands, Spain).

Se ha realizado un estudio dendrogeomorfológico utilizando las heridas de los árboles como indicadores de paleoinundaciones.

Seismic modelling of bridges with semirigid connections

The need to modal semi-rigid behaviour of joints to analyze the seismic response of bridges arises when retrofitting devices such as cables or bolts are introduced in otherwise free joints or when the design takes advantage of the plastification of structural sections to impose energy dissipation though their ductile behaviour. The paper presents some preliminary results of a parametric study carried out using s1mplified computational models. Two instances where semirigid connection play a role in the seismic response of bridges have been discussed. The ongoing research from which this paper is extracted is intended to enhance understanding on the effectivness of various bridge retrofitting measures and to provide information that may be used to calibrate some ECS-2 rules. Finally, it is hoped that the development of reliable simplified techniques for nonlinear analysis will provide designers with useful tools to examine behavior and ultimately improve seismic safety in actual bridges.

Seismicity and seismic risk in Spain = Sismicite et risque sismique en Espagne

The spanish seismic norm has a direct application in building construction but it recomends specific studies in the case of important public works such us large dams or bridges. For this reason, and to establish specifical criteria in its field of activity, the Dirección General de Obras Hidráulicas of the spanish Ministerio de Obras Públicas y Urbanismo commissioned us a seismotectonical and seismic risk study applicable to Spain, materialized on a series of maps of inmediate and direct use. In this paper we explain the methodology pursued to obtain these maps. It has required, firstly, investigations with the aim to improve the seismic information corresponding to the historical or preinstrumental period, that allowed more precise cuantifications. Secondly, these data have been processed by probabilistic methods, using de intensity as foundamental parameter. The corresponding maps have been developed. Finally, other maps of seismic accelerations have been compiled. La normative sismorresistent espagnole á une application directe dans 1'edification, mais elle recommend la realitation des etudes especifiques dans le cas des travaux publics importants telles que ponts ou barrages. Pour cette raison et pour etablir des criteres especifiques dans son camp dáctivité, la Direccion General de Obras Hidraulicas du Ministerio de Obras Publicas y Urbanismo espagnol a commande un etude sismotectonique et de risque sismique applicable a l'Espagne, materialise en une serie de cartes de utilization directe et inmediate. Dans cette communication on explique la methodologie a suivre pour la realization de cettes cartes. Celá a fait necessaire, d'abord, des recherches pour amelliorer l'information concernant le periode historique ou preinstrumental, ce qui permet des cuantifications plus precises. En second lieu ces faits ont ête traités avec des methodes probabilistes, employant l'intensité come parametre fondamental. En consequence nous avons developpe des cartes d'intensite et d'acceleration sismique.

Simplified longitudinal seismic analysis of buried tunnels

In this paper an analytical static approach to analyse buried tunnels under seismic surface waves (Rayleigh and Love waves), propagating parallel to the tunnels axis, is provided. In the proposed method, the tunnel is considered as a beam on elastic foundation by using a Winkler model to represent the subgrade reaction and the soil-structure interaction. The seismic load is imposed by giving at the base of the soil springs a determined configuration corresponding to the free-field motion. From the solution of the differential governing equations of the problem, results are obtained in form of relative displacements between points of tunnel, and therefore the seismic bending moments and shearing forces, acting on the tunnel cross section, can be computed.

Modeling of dangerous phenomena and innovative techniques for hazard evaluation and risk mitigation

Society is frequently exposed to and threatened by dangerous phenomena in many parts of the world. Different types of such phenomena require specific actions for proper risk management, from the stages of hazard identification to those of mitigation (including monitoring and early-warning) and/or reduction. The understanding of both predisposing factors and triggering mechanisms of a given danger and the prediction of its evolution from the source to the overall affected zone are relevant issues that must be addressed to properly evaluate a given hazard.

Seismic soil-interaction on earth retaining structures. Performance-based seismic design of a Retaining Wall

The design of containment walls suffering seismic loads traditionally has been realized with methods based on pseudoanalitic procedures such as Mononobe- Okabe's method, which it has led in certain occasions to insecure designs, that they have produced the ruin of many containment walls suffering the action of an earthquake. A method is proposed in this papers for the design of containment walls in different soils, suffering to the action of an earthquake, based on the Performance-Based Seismic Design.

Performance-based seismic design of a retaining wall

The design of containment walls suffering seismic loads traditionally has been realized with methods based on pseudoanalitic procedures such as Mononobe-Okabe's method, which it has led in certain occasions to insecure designs, that they have produced the ruin of many containment walls suffering the action of an earthquake. The recommendations gathered in Mononobe-Okabe's theory have been included in numerous Codes of Seismic Design. It is clear that a revision of these recommendations must be done. At present there is taking place an important review of the design methods of anti-seismic structures such as containment walls placed in an area of numerous earthquakes, by means of the introduction at the beginning of the decade of 1990 the Displacement Response Spectrum (DRS) and the Capacity Demand Diagram (CDD) that suppose an important change in the way of presenting the Elastic Response Spectrum (ERS). On the other hand in case of action of an earthquake, the dynamic characteristics of a soil have been referred traditionally to the speed of the shear waves that can be generated in a site, together with the characteristics of plasticity and damping of the soil. The Principle of the energy conservation explains why a shear upward propagating seismic wave can be amplified when travelling from a medium with high shear wave velocity (rock) to other medium with lower velocity (soil deposit), as it happened in the earthquake of Mexico of 1985. This amplification is a function of the speed gradient or of the contrast of impedances in the border of both types of mediums. A method is proposed in this paper for the design of containment walls in different soils, suffering to the action of an earthquake, based on the Performance-Based Seismic Design.

Seismic earth thrust against massive building walls

The problem of earth thrust for a massive building in a seismic environment is analysed. Intertial and kinematic soil-structure interactions are considered by modelling the soil and the structure together. The problem is solved in the frequency domain by using the computer code FLUSH. Results show that the horizontal component of the seismic earth thrust is much greater than that obtained when applying the Mononobe-Okabe theory. This study establishes a set of conclusicns and recommendations for both design and practical purposes, and proposes future lines of investigation.

Assessment of expected damage on buildings subjected to Lorca earthquake through an energy-based seismic index method and nonlinear dynamic response analyses

The city of Lorca (Spain) was hit on May 11th, 2011, by two consecutive earth-quakes of magnitudes 4.6 and 5.2 Mw, causing casualties and important damage in buildings. Many of the damaged structures were reinforced concrete frames with wide beams. This study quantifies the expected level of damage on this structural type in the case of the Lorca earth-quake by means of a seismic index Iv that compares the energy input by the earthquake with the energy absorption/dissipation capacity of the structure. The prototype frames investigated represent structures designed in two time periods (1994–2002 and 2003–2008), in which the applicable codes were different. The influence of the masonry infill walls and the proneness of the frames to concentrate damage in a given story were further investigated through nonlinear dynamic response analyses. It is found that (1) the seismic index method predicts levels of damage that range from moderate/severe to complete collapse; this prediction is consistent with the observed damage; (2) the presence of masonry infill walls makes the structure very prone to damage concentration and reduces the overall seismic capacity of the building; and (3) a proper hierarchy of strength between beams and columns that guarantees the formation of a strong column-weak beam mechanism (as prescribed by seismic codes), as well as the adoption of counter-measures to avoid the negative interaction between non-structural infill walls and the main frame, would have reduced the level of damage from Iv=1 (collapse) to about Iv=0.5 (moderate/severe damage)

Modified Gutenberg-Richter coefficient for damage evaluation in reinforced concrete structures subjected to seismic simulations on a shaking table

This paper presents analysis and discussion of the b- and ib-values calculated from the acoustic emission (AE) signals recorded during dynamic shake-table tests conducted on a reinforced concrete (RC) frame subjected to several uniaxial seismic simulations of increasing intensity until collapse. The intensity of shaking was controlled by the peak acceleration applied to the shake-table in each seismic simulation, and it ranged from 0.08 to 0.47 times the acceleration of gravity. The numerous spurious signals not related to concrete damage that inevitably contaminate AE measurements obtained from complex dynamic shake-table tests were properly filtered with an RMS filter and the use of guard sensors. Comparing the b- and ib-values calculated through the tests with the actual level of macro-cracking and damage observed during testing, it was concluded that the limit value of 0.05 proposed in previous research to determine the onset of macro-cracks should be revised in the case of earthquake-type dynamic loading. Finally, the b- and ibvalues were compared with the damage endured by the RC frame evaluated both visually and quantitatively in terms of the inter-story drift index.

Study of seismic vulnerability and the damage seen in the town of Lorca after the earthquake of 2011.

Análisis de los factores de vulnerabilidad que mas influencia han tenido en el daño del terremoto de Lorca.

Analysis of urban parameters in the characterization of seismic vulnerability: application to the city of Lorca.

Estimación de la intensidad tras el terremoto de Lorca.