Comparison of deposited surface area of airborne ultrafine particles generated from two welding processes

This article describes work performed on the assessment of the levels of airborne ultrafine particles emitted in two welding processes metal-active gas (MAG) of carbon steel and friction-stir welding (FSW) of aluminium in terms of deposited area in alveolar tract of the lung using a nanoparticle surface area monitor analyser. The obtained results showed the dependence from process parameters on emitted ultrafine particles and clearly demonstrated the presence of ultrafine particles, when compared with background levels. The obtained results showed that the process that results on the lower levels of alveolar-deposited surface area is FSW, unlike MAG. Nevertheless, all the tested processes resulted in important doses of ultrafine particles that are to be deposited in the human lung of exposed workers.

Hippuric acid in urine: reference values

OBJECTIVE: To establish reference values for hippuric acid (HA) excreted in the urine, and to evaluate the impact of age, gender, alcohol, and tobacco, on these levels in a population nonexposed to toluene. METHODS: Reference values for hippuric acid in urine were determined in 115 toluene nonexposed healthy volunteers, from Alfenas city, Southeastern Brazil. A questionnaire was applied to each volunteer and data on occupational and personal habits were collected. Biochemical and hematological analyses were used to confirm the volunteers' good health condition. Reference values were expressed in g HA/g urine creatinine, as mean ± standard deviation (x ± SD), median, 95% confidence interval (95%CI), 95th percentile, and upper reference value (URV, mean +2 SD). RESULTS: Reference values of hippuric acid in urine were: mean ± standard deviation =0.18±0.10; median =0.15; 95% confidence interval =0.16±0.20; 95th percentile = 0.36 and upper reference value (URV, mean +2 SD) =0.38. Statistically significant differences in urinary HA (Wilcoxon - Mann/Whitney, p<0.05) were observed for different genders and age groups. Alcohol ingestion and smoking habit did not significantly affect the results. CONCLUSIONS: The reference values of hippuric acid in urine can be used in biomonitoring programs of workers occupationally exposed to toluene, especially in the southern region of the state of Minas Gerais. Age and gender may affect the HA reference values.

Estudo da norma contabilística e de relato financeiro nº 13 – interesses em empreendimentos conjuntos e investimentos em associadas e suas implicações fiscais e de auditoria

Dissertação apresentada ao Instituto Superior de Contabilidade e Administração do Porto para a obtenção do Grau de Mestre em Auditoria Orientada pelo Dr. José da Silva Fernandes

O desenvolvimento do conceito de área: um estudo com alunos do 3.º ano de escolaridade

O objetivo desta investigação é compreender como é que alunos do 3.º ano de escolaridade desenvolvem o conceito de área com ênfase em conhecimentos sobre figuras e propriedades geométricas. Para melhor objetivar o estudo, formulei três questões que orientaram a investigação. Pretendo (1) compreender como é que os alunos mobilizam conhecimentos sobre as propriedades das figuras geométricas no estudo da área de uma figura plana? A que estratégias recorrem? Que dificuldades sentem? (2) que compreensão é que os alunos têm sobre o processo de medição? e (3) que ideias e/ou experiências são relevantes no desenvolvimento do conceito de área? Este é um estudo que se insere no paradigma interpretativo e que segue uma abordagem qualitativa, pelo que não visa generalização de resultados, mas uma descrição compreensiva dos processos vivenciados, tendo em conta os contextos pessoais e sociais. Optei por realizar dois Estudos de Caso. Os dados foram recolhidos através de fontes diversificadas, donde se destacam a observação participante e a análise de registos audiovisuais e escritos dos alunos. A análise dos dados teve por referência categorias criadas com base em contributos da literatura de referência. As conclusões desta investigação centram-se numa análise acerca das estratégias a que os alunos em estudo tendencialmente mais recorrem, visando também algumas das suas dificuldades mais relevantes e sobre as quais importa refletir. Destaca-se que ambos os alunos foram capazes de recorrer a raciocínios baseados e não baseados na medida, embora seja evidente uma tendência para raciocínios baseados na medida. É igualmente importante referir que os dois alunos revelaram um bom conhecimento acerca do processo de medição, mesmo quando ele implicava a definição de uma unidade de medida adequada e/ou mudança de unidade. É dado, também, destaque às experiências matemáticas que devem ser proporcionadas aos alunos no sentido do desenvolvimento de um conhecimento amplo e flexível do conceito de área. - Abstract The purpose of this investigation is to understand the development of 3rd year students’ concept of area based on their knowledge of geometrical properties and figures. As means to orientate the present study, the following investigation questions were formulated: 1) how do students use their knowledge about geometrical properties in order to understand geometrical shape’s areas? Which strategies do they use? What do they struggle with? (2) What is their understanding about measurement? And (3) what are the most relevant mathematical reasonings and classroom tasks in the development of the concept of area? This is a study that follows a qualitative approach: it does not intend to be a generalization, but a fully comprehensive description of the witnessed learning processes, bearing in mind the social and personal contexts. As such, two study-cases were developed. The data were collected through various sources, such as direct observation and analysis of audiovisual records or written worksheets. The scrutiny of the generated data was undertaken following criteria based on the literature of reference. The conclusions of this investigation are centered on the most used strategies as well as the students’ difficulties upon which it is important to discuss. It was noticed that the two students were able to use both measurement and non measurement thinking – although, preferably, they tend to use the first one. On the other hand, it is equally demonstrated that the two students have shown good acquaintance about measurement, even if obliged to the establishment of a suitable unit of measurement and/or change of units. At last, it is also referred which mathematical classroom tasks are important to develop a sustained and comprehensive concept of area.

Aedes albopictus in an area of Misiones, Argentina

Until early 1998 the presence of Aedes albopictus had never been detected in Argentina. During April of the same year, few individuals of this species were recorded in 33 breeding sites found in 25 out of 161 inspected houses in the city of Eldorado, Province of Misiones. The homogeneous spatial distribution of the proliferation foci suggests the existence of a generalized infestation in this locality during the study period.

Intelligent power system

Artificial intelligence techniques are being widely used to face the new reality and to provide solutions that can make power systems undergo all the changes while assuring high quality power. In this way, the agents that act in the power industry are gaining access to a generation of more intelligent applications, making use of a wide set of AI techniques. Knowledge-based systems and decision-support systems have been applied in the power and energy industry. This article is intended to offer an updated overview of the application of artificial intelligence in power systems. This article paper is organized in a way so that readers can easily understand the problems and the adequacy of the proposed solutions. Because of space constraints, this approach can be neither complete nor sufficiently deep to satisfy all readers’ needs. As this is amultidisciplinary area, able to attract both software and computer engineering and power system people, this article tries to give an insight into themost important concepts involved in these applications. Complementary material can be found in the reference list, providing deeper and more specific approaches.

Optimal scheduling of a renewable micro-grid in an isolated load area using mixed-integer linear programming

In the energy management of the isolated operation of small power system, the economic scheduling of the generation units is a crucial problem. Applying right timing can maximize the performance of the supply. The optimal operation of a wind turbine, a solar unit, a fuel cell and a storage battery is searched by a mixed-integer linear programming implemented in General Algebraic Modeling Systems (GAMS). A Virtual Power Producer (VPP) can optimal operate the generation units, assured the good functioning of equipment, including the maintenance, operation cost and the generation measurement and control. A central control at system allows a VPP to manage the optimal generation and their load control. The application of methodology to a real case study in Budapest Tech, demonstrates the effectiveness of this method to solve the optimal isolated dispatch of the DC micro-grid renewable energy park. The problem has been converged in 0.09 s and 30 iterations.

A probabilistic methodology for distributed generation location in isolated electrical service area

Distributed generation unlike centralized electrical generation aims to generate electrical energy on small scale as near as possible to load centers, interchanging electric power with the network. This work presents a probabilistic methodology conceived to assist the electric system planning engineers in the selection of the distributed generation location, taking into account the hourly load changes or the daily load cycle. The hourly load centers, for each of the different hourly load scenarios, are calculated deterministically. These location points, properly weighted according to their load magnitude, are used to calculate the best fit probability distribution. This distribution is used to determine the maximum likelihood perimeter of the area where each source distributed generation point should preferably be located by the planning engineers. This takes into account, for example, the availability and the cost of the land lots, which are factors of special relevance in urban areas, as well as several obstacles important for the final selection of the candidates of the distributed generation points. The proposed methodology has been applied to a real case, assuming three different bivariate probability distributions: the Gaussian distribution, a bivariate version of Freund’s exponential distribution and the Weibull probability distribution. The methodology algorithm has been programmed in MATLAB. Results are presented and discussed for the application of the methodology to a realistic case and demonstrate the ability of the proposed methodology for efficiently handling the determination of the best location of the distributed generation and their corresponding distribution networks.

Introduction to the special issue on real world applications of intelligent tutoring systems

The idea behind creating this special issue on real world applications of intelligent tutoring systems was to bring together in a single publication some of the most important examples of success in the use of ITS technology. This will serve as a reference to all researchers working in the area. It will also be an important resource for the industry, showing the maturity of ITS technology and creating an atmosphere for funding new ITS projects. Simultaneously, it will be valuable to academic groups, motivating students for new ideas of ITS and promoting new academic research work in the area.

Constructing reference in children's narratives

In this paper we are concerned with the role played by adverbials in the construction of reference in children's narratives.

Phlebotomine fauna in a rural area of the Brazilian Pantanal

The aim of the study was to identify among the phlebotomine fauna potential leishmaniasis vectors. The study was carried out in Corumbá county, State of Mato Grosso do Sul, Mid-West Brazil (18º59'S, 56º39'W). Sand fly captures were undertaken fortnightly with automatic light traps at 11 sites in forested environments and anthropic areas from April 2001 to July 2003. A total of only 41 specimens were captured. Thirty-one percent of the specimens were captured in forests and 68.3% in anthropic areas. The predominance of non-anthropophilic groups and the low density of N. whitmani, a known cutaneous leishmaniasis vector, does not seem to indicate any actual risk of the transmission of this disease in the study area.

Performance of rubella suspect case definition: implications for surveillance

OBJECTIVE: To assess the performance of the rubella suspect case definition among patients with rash diseases seen at primary care units. METHODS: From January 1994 to December 2002, patients with acute rash, with or without fever, were seen at two large primary health care units and at a public general hospital in the municipality of Niterói, metropolitan area of Rio de Janeiro, Brazil. Data from clinical and serologic assessment were used to estimate the positive predictive values of the definition of rubella suspect case from the Brazilian Ministry of Health and other combination of signs/symptoms taking serologic status as the reference. Serum samples were tested for anti-rubella virus IgM using commercially available enzyme immunoassays. Positive predictive values and respective 95% confidence intervals were calculated. RESULTS: A total of 1,186 patients with an illness characterized by variable combinations of rash with fever, arthropathy and lymphadenopathy were studied. Patients with rash, regardless of other signs and symptoms, had 8.8% likelihood of being IgM-positive for rubella. The Brazilian suspect case definition (fever and lymphadenopathy in addition to rash) had low predictive value (13.5%). This case definition would correctly identify 42.3% of the IgM-positive cases, and misclassify 26.1% of the IgM-negative cases. CONCLUSIONS: These results support the recommendation to investigate and collect clinical specimens for laboratory diagnosis of all cases of rash, for surveillance purposes. Although this strategy may increase costs, the benefits of interrupting the circulation of rubella virus and preventing the occurrence of congenital rubella syndrome should pay off.

Avaliação da eco-eficiência de uma empresa de serviços: caso prático

Mestrado em Engenharia Química

A Voltage Limiter Circuit for Indoor Light Energy Harvesting Applications

A voltage limiter circuit for indoor light energy harvesting applications is presented. This circuit is a part of a bigger system, whose function is to harvest indoor light energy, process it and store it, so that it can be used at a later time. This processing consists on maximum power point tracking (MPPT) and stepping-up, of the voltage from the photovoltaic (PV) harvester cell. The circuit here described, ensures that even under strong illumination, the generated voltage will not exceed the limit allowed by the technology, avoiding the degradation, or destruction, of the integrated die. A prototype of the limiter circuit was designed in a 130 nm CMOS technology. The layout of the circuit has a total area of 23414 mu m(2). Simulation results, using Spectre, are presented.

Crianças com défices no controlo motor: contributo para a elaboração do core set da Classificação Internacional de Funcionalidade, Incapacidade e Saúde (CIF)

A CIF é um sistema de classificação adotado pela OMS, que serve de referência universal para descrever, avaliar e medir saúde e incapacidade, a nível individual e ao nível da população. Contudo, apesar do interesse internacional gerado em torno da CIF, esta é considerada uma classificação complexa e extensa, fato que despoletou a criação de core sets – listas de itens da CIF especificamente selecionados pela sua relevância na descrição e qualificação de uma determinada condição de saúde – como resposta a esta problemática. Até à data, foram desenvolvidos core sets para várias patologias comuns. Contudo, apesar do controlo motor ser uma área de investigação muito reconhecida nos últimos 20 anos, ainda não possui um core set próprio. Assim, o objetivo deste estudo é contribuir para o desenvolvimento de um core set, com base na CIF-CJ, dirigido para uma descrição abrangente das competências inerentes a crianças, dos 6 aos 18 anos de idade, com défices no controlo motor. Deste modo, recorreu-se a uma revisão da literatura sobre a temática em estudo, de modo a reunir informação para a construção de uma proposta a core set, posteriormente sujeita ao escrutínio de peritos, através do recurso ao método de Delphi. Após várias rondas, foi alcançado um consenso acerca da lista final de códigos CIF que constituem o core set final.