Q-angle static or dynamic measurements, which is the best choice for patellofemoral pain?

The elevated Q-angle seems to be one of the most suggested factors contributing to patellofemoral pain. Females with patellofemoral pain are often evaluated through static clinical tests in clinical practice. However, the adaptations seem to appear more frequently in dynamic conditions. Performing static vs. dynamic evaluations of widely used measures would add to the knowledge in this area. Therefore, the aim of this study was to determine the reliability and discriminatory capability of three Q-angle measurements: a static clinical test, peak dynamic knee valgus during stair ascent and a static measurement using a three-dimensional system. Twenty-nine females with patellofemoral pain and twenty-five pain-free females underwent clinical Q-angle measurement and static and dynamic knee valgus measurements during stair ascent, using a three-dimensional system. All measurements were obtained and comparisons between groups, reliability and discriminatory capability were calculated. Peak dynamic knee valgus was found to be greater in the patellofemoral pain group. On the other hand, no significant effects were found for static knee valgus or clinical Q-angle measurements between groups. The dynamic variable demonstrated the best discriminatory capability. Low values of reliability were found for clinical Q-angle, in contrast to the high values found for the three-dimensional system measurements. Based on our findings, avoiding or correcting dynamic knee valgus during stair ascent may be an important component of rehabilitation programs in females with patellofemoral pain who demonstrate excessive dynamic knee valgus. Q-angle static measurements were not different between groups and presented poor values of discriminatory capability.

A formalized optimum code search for q-ary trellis codes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Singularidades do tipo D(q,p)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise da resistência à fadiga de tubos de aço API 5CT N80 Tipo Q soldados via processo de indução magnética de alta frequência (HFIW)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Multi-q pattern analysis: A case study in image classification

This paper compares the effectiveness of the Tsallis entropy over the classic Boltzmann-Gibbs-Shannon entropy for general pattern recognition, and proposes a multi-q approach to improve pattern analysis using entropy. A series of experiments were carried out for the problem of classifying image patterns. Given a dataset of 40 pattern classes, the goal of our image case study is to assess how well the different entropies can be used to determine the class of a newly given image sample. Our experiments show that the Tsallis entropy using the proposed multi-q approach has great advantages over the Boltzmann-Gibbs-Shannon entropy for pattern classification, boosting image recognition rates by a factor of 3. We discuss the reasons behind this success, shedding light on the usefulness of the Tsallis entropy and the multi-q approach. (C) 2012 Elsevier B.V. All rights reserved.

Discretionary-based disclosure: evidence from the Brazilian market

The primary objective of this paper is to identify the factors that explain Brazilian companies level of voluntary disclosure. Underpinning this work is the Discretionary-based Disclosure theory. The sample is composed of the top 100 largest non-financial companies listed in the Bolsa de Valores de São Paulo (Brazilian Securities, Commodities, and Futures exchange - BOVESPA). Information was gathered from Financial Statements for the years ending in 2006, 2007, and 2008, with the use of content analysis. A disclosure framework based on 27 studies from these years was created, with a total of 92 voluntary items divided into two dimensions: economic (43) and socio-environmental (49). Based on the existing literature, a total of 12 hypotheses were elaborated and tested using a panel data approach. Results evidence that: (a) Sector and Origin of Control are statistically significant in all three models tested: economic, socio-environmental, and total; (b) Profitability is relevant in the economic model and in the total model; (c) Tobin s Q is relevant in the socio-environmental model and in the total disclosure model; (d) Leverage and Auditing Firm are only relevant in the economic disclosure model; (e) Size, Governance, Stock Issuing, Growth Opportunities and Concentration of Control are not statistically significant in any of the three models.

Bestimmung des elektrischen Formfaktors des Neutrons G en in der Reaktion 3 He (e,e'n) bei einem Impulsübertrag Q 2 =0.67 (GeV/c) 2

In der Überprüfung von Kernmodellen stellt der elektrische Formfaktor des Neutrons Gen eine wichtige Eingangsgröße dar. Im Rahmen dieser Arbeit wurde am polarisierten Elektronenstrahl des Mainzer Mikrotrons MAMI der elektrische Formfaktor des Neutrons in der Reaktion 3He(e,e'n) bestimmt. Aus dem Verhältnis der Asymmetrien respektive der Helizitätsumkehr der Elektronenpolarisation mit Targetspin senkrecht und parallel zum Impulsübertrag konnte in einer integralen Analyse Gen bestimmt werden. Zusammengefasst ergab sich Gen(Q2=0.67 (GeV/c)2) = 0.0468 +- 0.0064(stat} +- 0.0027(syst}. Um den Einfluß von Kernbindungseffekten, die z. Zt. von der Gruppe um Prof. Glöckle in Bochum theoretisch gerechnet werden, auch experimentell abzusichern, wurden parallel zur Gen-Messung die Targetasymmetrie Ay0 3He(e,e'n) und Protonenasymmetrie 3He(e,e'p) bestimmt. Die Empfindlichkeit dieser Observablen auf FSI und D-Wellenbeiträge schafft Redundanzen, aus denen auf die Eigenschaften des freien Neutrons im gebundenen System geschlossen werden kann.

Strukturen und Phasen des beta-Eukryptits sowie die Sammlung von Beugungsdaten mit axialen q-Scans

Der 'gestopfte Hochquarz' ß-Eukryptit (LiAlSiO4) ist bekannt für seine außergewöhnliche anisotrope Li-Ionenleitfähigkeit und die nahe Null liegende thermische Ausdehnung.Untersucht wurde die temperaturabhängige ß-Eukryptit-Phasenabfolge, insbesondere die modulierte Phase. Deren Satellitenreflexe sind gegenüber den normalen Reflexen erheblich verbreitert, überlappen miteinander sowie mit den dazwischen liegenden 'a-Reflexen' zu Tripletts. Für die Separation der Triplett-Intensitäten waren bisherige Standardverfahren zur Beugungsdatensammlung ungeeignet. Mit 'axialen q-Scans' wurde ein neuartiges Verfahren entwickelt. Intensitäten wurden mit dem neu-entwickelten least squares-Programm GKLS aus 2000 Profilen seriell und automatisch gewonnen und erfolgreich auf Standarddaten skaliert. Die Verwendung verbreiterter Reflexprofile erwies sich als zulässig.Die Verbreiterung wurde auf eine verminderte Fernordnung der Modulation von 11 bis 16 Perioden zurückgeführt (Analyse mit der Gitterfunktion), womit ein ungewöhnliches beugungswinkelabhängiges Verhalten der Reflexbreiten korrespondiert und mit typischen Antiphasendomänendurchmessern (andere Autoren) korreliert.Eine verminderte Si-/ Al-Ordnung wird als ursächlich für geringe Domänengrößen und Fernordnung angesehen, sowie für Eigenschaften wie z.B. a/c-Verhältnisse, Ausdehnungskoeffizienten, Ionenleitfähigkeit, Strukturtyp und Umwandlungstemperaturen. Änderungen des SiO2-Gehaltes, der Temperatur oder der Si- /Al-Ordnung zeitigen für einige Eigenschaften ähnliche Wirkungen.Die gemittelte Struktur der modulierten Phase wurde erstmals zuverlässig bestimmt, die Rolle des Li charakterisiert, Zweifel an der hexagonalen Symmetrie des ß-Eukryptits wurden ausgeräumt und die Bestimmung der modulierten Struktur wurde weitgehend vorbereitet.

Synthesis and characterization of metal-chalcogenide MQ 2-Nanoparticles (M = Mo, W, Zr; Q = S, O)

Here, we present the adaptation and optimization of (i) the solvothermal and (ii) the metal-organic chemical vapor deposition (MOCVD) approach as simple methods for the high-yield synthesis of MQ2 (M=Mo, W, Zr; Q = O, S) nanoparticles. Extensive characterization was carried out using X-ray diffraction (XRD), scanning and transmission electron micros¬copy (SEM/TEM) combined with energy dispersive X-ray analysis (EDXA), Raman spectroscopy, thermal analyses (DTA/TG), small angle X-ray scattering (SAXS) and BET measurements. After a general introduction to the state of the art, a simple route to nanostructured MoS2 based on the decomposition of the cluster-based precursor (NH4)2Mo3S13∙xH2O under solvothermal conditions (toluene, 653 K) is presented. Solvothermal decomposition results in nanostructured material that is distinct from the material obtained by decomposition of the same precursor in sealed quartz tubes at the same temperature. When carried out in the presence of the surfactant cetyltrimethyl¬ammonium bromide (CTAB), the decomposition product exhibits highly disordered MoS2 lamellae with high surface areas. The synthesis of WS2 onion-like nanoparticles by means of a single-step MOCVD process is discussed. Furthermore, the results of the successful transfer of the two-step MO¬CVD based synthesis of MoQ2 nanoparticles (Q = S, Se), comprising the formation of amorphous precursor particles and followed by the formation of fullerene-like particles in a subsequent annealing step to the W-S system, are presented. Based on a study of the temperature dependence of the reactions a set of conditions for the formation of onion-like structures in a one-step reaction could be derived. The MOCVD approach allows a selective synthesis of open and filled fullerene-like chalcogenide nanoparticles. An in situ heating stage transmission electron microscopy (TEM) study was employed to comparatively investigate the growth mechanism of MoS2 and WS2 nanoparticles obtained from MOCVD upon annealing. Round, mainly amorphous particles in the pristine sample trans¬form to hollow onion-like particles upon annealing. A significant difference between both compounds could be demonstrated in their crystallization conduct. Finally, the results of the in situ hea¬ting experiments are compared to those obtained from an ex situ annealing process under Ar. Eventually, a low temperature synthesis of monodisperse ZrO2 nanoparticles with diameters of ~ 8 nm is introduced. Whereas the solvent could be omitted, the synthesis in an autoclave is crucial for gaining nano-sized (n) ZrO2 by thermal decomposition of Zr(C2O4)2. The n-ZrO2 particles exhibits high specific surface areas (up to 385 m2/g) which make them promising candidates as catalysts and catalyst supports. Co-existence of m- and t-ZrO2 nano-particles of 6-9 nm in diameter, i.e. above the critical particle size of 6 nm, demonstrates that the particle size is not the only factor for stabilization of the t-ZrO2 modification at room temperature. In conclusion, synthesis within an autoclave (with and without solvent) and the MOCVD process could be successfully adapted to the synthesis of MoS2, WS2 and ZrO2 nanoparticles. A comparative in situ heating stage TEM study elucidated the growth mechanism of MoS2 and WS2 fullerene-like particles. As the general processes are similar, a transfer of this synthesis approach to other layered transition metal chalcogenide systems is to be expected. Application of the obtained nanomaterials as lubricants (MoS2, WS2) or as dental filling materials (ZrO2) is currently under investigation.

Near-Optimum Coding for q-ary Symmetric Channel with Application to Space Communications

Questa Tesi aspira a mostrare un codice a livello di pacchetto, che abbia performance molto vicine a quello ottimo, per progetti di comunicazioni Satellitari. L’altro scopo di questa Tesi è quello di capire se rimane ancora molto più difficile maneggiare direttamente gli errori piuttosto che le erasures. Le applicazioni per comunicazioni satellitari ora come ora usano tutte packet erasure coding per codificare e decodificare l’informazione. La struttura dell’erasure decoding è molto semplice, perché abbiamo solamente bisogno di un Cyclic Redundancy Check (CRC) per realizzarla. Il problema nasce quando abbiamo pacchetti di dimensioni medie o piccole (per esempio più piccole di 100 bits) perché in queste situazioni il costo del CRC risulta essere troppo dispendioso. La soluzione la possiamo trovare utilizzando il Vector Symbol Decoding (VSD) per raggiungere le stesse performance degli erasure codes, ma senza la necessità di usare il CRC. Per prima cosa viene fatta una breve introduzione su come è nata e su come si è evoluta la codifica a livello di pacchetto. In seguito è stato introdotto il canale q-ary Symmetric Channel (qSC), con sia la derivazione della sua capacità che quella del suo Random Coding Bound (RCB). VSD è stato poi proposto con la speranza di superare in prestazioni il Verification Based Decoding (VBD) su il canale qSC. Infine, le effettive performance del VSD sono state stimate via simulazioni numeriche. I possibili miglioramenti delle performance, per quanto riguarda il VBD sono state discusse, come anche le possibili applicazioni future. Inoltre abbiamo anche risposto alla domande se è ancora così tanto più difficile maneggiare gli errori piuttosto che le erasure.

Messung von Q beta-Werten neutronenreicher Tc- bis Pd-Isotope im Massenbereich A=110 bis A=117

In der vorliegenden Arbeit wurden zwölf Q(beta)-Werte von beta-instabilen Pd, Ru, Rh und Tc-Isotopen gemessen. Der betrachtete Massenbereich A=110 bis A=117 liegt am Rande des bekannten Gebiets der Nuklidkarte und umfasst sehr neutronenreiche kurzlebige Isotope dieser Elemente, die sich durch geringe Spalthäufigkeit auszeichnen. Durch die geringen (Spalt-)Häufigkeiten dieser Nuklide liegen kaum Daten vor, teilweise auch nicht über die Niveauschemata. Es ist daher notwendig, eine protoneninduzierte Spaltungsreaktion zur Darstellung dieser Isotope zu verwenden und die Spaltprodukte innerhalb kürzester Zeit für die Messung nach Massen aufzutrennen, wie dies am IGISOL in Jyväskylä/Finnland geschieht. Die aufgebaute Apparatur zur beta,gamma,X-Koinzidenz erlaubt es, während ein und desselben Experiments neben der Messung der Q(beta)-Werte gleichzeitig gamma,X-Koinzidenzen auszuwerten, die die benötigten Grundinformationen für die Q(beta)-Bestimmung über die beta,gamma-Koinzidenzen liefern. Es können somit nicht nur Q(beta)-Werte von Nukliden mit bereits bekannten Niveauschemata ermittelt, sondern auch erfolgreich Nuklide mit unvollständigen Niveauschemata einer ersten Messung unterzogen werden. Umgekehrt können beta,gamma-Koinzidenzdaten weitere Informationen zum Aufbau neuer Niveauschemata liefern. Mit Hilfe der beschriebenen Koinzidenzmessung konnten zwölf Q(beta)-Werte von sehr neutronenreichen Pd- bis Tc-Isotopen gemessen und daraus die Kernmassen, Massenüberschüsse und Neutronen-Separationsenergien bestimmt werden. Von diesen wurden acht Werte erstmalig bestimmt, ein weiterer Wert konnte bestätigt sowie die Fehler von drei weiteren Werten um den Faktor Zehn verringert werden. Die gewonnenen Daten sind von Interesse für die Beurteilung von Kernmassenmodellen und gehen ebenso in Modellrechnungen der nuklearen Astrophysik ein.