Infrared thermography monitoring of the NaCl crystallisation process

In this work, we describe the growth of NaCl crystals by evaporating droplets of aqueous solution while monitoring them with infrared thermography. Over the course of the evaporation experiments, variations in the recorded signal were observed and interpreted as being the result of evaporation and crystallisation. In particular, we observed sharp and transient decreases in the thermosignal during the later stages of high-concentration drop evaporation. The number of such events per experiment, referred to as “pop-cold events”, varied from 1 to over 100 and had durations from 1 to 15 s. These events are interpreted as a consequence from the top-supplied creeping (TSC) of the solution feeding the growth of efflorescence-like crystals. This phenomenon occurred when the solution was no longer macroscopically visible. In this case, efflorescence-like crystals with a spherulite shape grew around previously formed cubic crystals. Other crystal morphologies were also observed but were likely fed by mass diffusion or bottom-supplied creeping (BSC) and were not associated with “pop-cold events”; these morphologies included the cubic crystals at the centre, ring-shaped at the edge of droplets and fan-shaped crystals. After complete evaporation, an analysis of the numbers and sizes of the different types of crystals was performed using image processing. Clear differences in their sizes and distribution were observed in relation to the salt concentration. Infrared thermography permitted a level of quantification that previously was only possible using other techniques. As example, the intermittent efflorescence growth process was clearly observed and measured for the first time using infrared thermography.

Understanding the role of CAP proteins in the polarization process of C. elegans

La division cellulaire asymétrique est un processus crucial dans le développement des organismes multicellulaires puisqu’elle permet la génération de la diversité cellulaire. Les cellules qui se divisent de façon asymétrique doivent tout d’abord se polariser et correctement orienter leur fuseau mitotique pour ségréger des déterminants cellulaires en deux entités distinctes. L’embryon du nématode C. elegans est un modèle robuste et largement utilisé pour étudier la division cellulaire asymétrique. Dans cet embryon, le point d'entrée du spermatozoïde détermine l'axe de polarité antéro-postérieur. Suite à la fécondation, le cortex embryonnaire est uniformément contractile et un complexe conservé formé des protéines PAR-3, PAR-6 et PKC-3 (nommé complexe PAR-3 ci-dessous) est localisé sur l'ensemble du cortex. La complétion de la méiose maternelle induit une relaxation corticale au postétieur et un flux cortical vers l’antérieur de l’embryon. Ces contractions corticales asymétriques mènent à la formation d'un domaine antérieur contenant le complexe PAR-3, tandis que le cortex postérieur, dont le complexe PAR-3 s’est délocalisé, est enrichi avec les protéines PAR-2 et PAR-1. Par conséquent, les domaines formés par les protéines PAR définissent un pôle antérieur et un pôle postérieur dans l'embryon suite au remodelage du cytosquelette. Les protéines PAR-4 et PAR-5 restent localisées de façon uniforme dans l'embryon. Curieusement, les protéines PAR exercent une régulation par rétroaction sur la contractilité corticale. Il a été montré qu’une des protéines PAR récemment identifiée, PAR-5, est orthologue à la protéine adaptatrice 14-3-3 et joue un rôle important dans la contractilité corticale. En dépit de son rôle central dans la contractilité corticale et le processus de polarisation cellulaire, le mécanisme par lequel PAR-5 régule la contractilité corticale n’est pas bien compris. Le but de ce projet est de mieux comprendre comment PAR-5 et ses interacteurs contrôlent la régulation des contractions corticales et, de ce fait, la polarité cellulaire. Dans un essai de capture de la protéine GST (GST pull-down), nous avons identifié plusieurs nouveaux interacteurs de PAR-5. Parmi ceux-ci, nous avons trouvé CAP-2 (protéine de coiffage de l'actine), qui a été identifiée dans des éxpériences de capture de 14-3-3 dans trois systèmes modèles différents. CAP-2 est un hétérodimère des protéines CAP, qui sont impliquées dans la régulation de l'actine. Nous avons trouvé que la déplétion des protéines CAP par interférence à l’ARN dans des vers de type sauvage mène à une augmentation létalité embryonnaire, ce qui suggère que ces protéines jouent un rôle important dans le développement embryonnaire. L'imagerie en temps réel d'embryons déplétés pour les protéines CAP montre qu’ils ont une diminution des contractions corticales avec un sillon de pseudoclivage mois stable, suggérant un défaut dans la régulation du cytosquelette d'actine-myosine. Ceci a également été confirmé par la diminution de la vitesse et du nombre de foci de NMY-2::GFP. En outre, ces embryons montrent une légère diminution de la taille du croissant cortical de PAR-2 lors de la phase d’établissement de la polarité. Les embryons déplétés en CAP-2 montrent également un retard dans la progression du cycle cellulaire, mais le lien entre ce phénotype et la régulation des contractions corticales reste à être précisé. La caractérisation des protéines CAP, des régulateurs du remodelage du cytosquelette, permettra d'améliorer notre compréhension des mécanismes qui sous-tendent l'établissement et le maintien de la polarité cellulaire, et donc la division cellulaire asymétrique.

EVALUATING THE OIL SANDS RECLAMATION PROCESS: ASSESSING POLICY CAPACITY AND STAKEHOLDER ACCESS FOR GOVERNMENT AND NON-GOVERNMENTAL ORGANIZATIONS OPERATING IN ALBERTA’S OIL SANDS

By employing interpretive policy analysis this thesis aims to assess, measure, and explain policy capacity for government and non-government organizations involved in reclaiming Alberta's oil sands. Using this type of analysis to assess policy capacity is a novel approach for understanding reclamation policy; and therefore, this research will provide a unique contribution to the literature surrounding reclamation policy. The oil sands region in northeast Alberta, Canada is an area of interest for a few reasons; primarily because of the vast reserves of bitumen and the environmental cost associated with developing this resource. An increase in global oil demand has established incentive for industry to seek out and develop new reserves. Alberta's oil sands are one of the largest remaining reserves in the world, and there is significant interest in increasing production in this region. Furthermore, tensions in several oil exporting nations in the Middle East remain unresolved, and this has garnered additional support for a supply side solution to North American oil demands. This solution relies upon the development of reserves in both the United States and Canada. These compounding factors have contributed to the increased development in the oil sands of northeastern Alberta. Essentially, a rapid expansion of oil sands operations is ongoing, and is the source of significant disturbance across the region. This disturbance, and the promises of reclamation, is a source of contentious debates amongst stakeholders and continues to be highly visible in the media. If oil sands operations are to retain their social license to operate, it is critical that reclamation efforts be effective. One concern non-governmental organizations (NGOs) expressed criticizes the current monitoring and enforcement of regulatory programs in the oil sands. Alberta's NGOs have suggested the data made available to them originates from industrial sources, and is generally unchecked by government. In an effort to discern the overall status of reclamation in the oil sands this study explores several factors essential to policy capacity: work environment, training, employee attitudes, perceived capacity, policy tools, evidence based work, and networking. Data was collected through key informant interviews with senior policy professionals in government and non-government agencies in Alberta. The following are agencies of interest in this research: Canadian Association of Petroleum Producers (CAPP); Alberta Environment and Sustainable Resource Development (AESRD); Alberta Energy Regulator (AER); Cumulative Environmental Management Association (CEMA); Alberta Environment Monitoring, Evaluation, and Reporting Agency (AEMERA); Wood Buffalo Environmental Association (WBEA). The aim of this research is to explain how and why reclamation policy is conducted in Alberta's oil sands. This will illuminate government capacity, NGO capacity, and the interaction of these two agency typologies. In addition to answering research questions, another goal of this project is to show interpretive analysis of policy capacity can be used to measure and predict policy effectiveness. The oil sands of Alberta will be the focus of this project, however, future projects could focus on any government policy scenario utilizing evidence-based approaches.

Understanding the role of CAP proteins in the polarization process of C. elegans

La division cellulaire asymétrique est un processus crucial dans le développement des organismes multicellulaires puisqu’elle permet la génération de la diversité cellulaire. Les cellules qui se divisent de façon asymétrique doivent tout d’abord se polariser et correctement orienter leur fuseau mitotique pour ségréger des déterminants cellulaires en deux entités distinctes. L’embryon du nématode C. elegans est un modèle robuste et largement utilisé pour étudier la division cellulaire asymétrique. Dans cet embryon, le point d'entrée du spermatozoïde détermine l'axe de polarité antéro-postérieur. Suite à la fécondation, le cortex embryonnaire est uniformément contractile et un complexe conservé formé des protéines PAR-3, PAR-6 et PKC-3 (nommé complexe PAR-3 ci-dessous) est localisé sur l'ensemble du cortex. La complétion de la méiose maternelle induit une relaxation corticale au postétieur et un flux cortical vers l’antérieur de l’embryon. Ces contractions corticales asymétriques mènent à la formation d'un domaine antérieur contenant le complexe PAR-3, tandis que le cortex postérieur, dont le complexe PAR-3 s’est délocalisé, est enrichi avec les protéines PAR-2 et PAR-1. Par conséquent, les domaines formés par les protéines PAR définissent un pôle antérieur et un pôle postérieur dans l'embryon suite au remodelage du cytosquelette. Les protéines PAR-4 et PAR-5 restent localisées de façon uniforme dans l'embryon. Curieusement, les protéines PAR exercent une régulation par rétroaction sur la contractilité corticale. Il a été montré qu’une des protéines PAR récemment identifiée, PAR-5, est orthologue à la protéine adaptatrice 14-3-3 et joue un rôle important dans la contractilité corticale. En dépit de son rôle central dans la contractilité corticale et le processus de polarisation cellulaire, le mécanisme par lequel PAR-5 régule la contractilité corticale n’est pas bien compris. Le but de ce projet est de mieux comprendre comment PAR-5 et ses interacteurs contrôlent la régulation des contractions corticales et, de ce fait, la polarité cellulaire. Dans un essai de capture de la protéine GST (GST pull-down), nous avons identifié plusieurs nouveaux interacteurs de PAR-5. Parmi ceux-ci, nous avons trouvé CAP-2 (protéine de coiffage de l'actine), qui a été identifiée dans des éxpériences de capture de 14-3-3 dans trois systèmes modèles différents. CAP-2 est un hétérodimère des protéines CAP, qui sont impliquées dans la régulation de l'actine. Nous avons trouvé que la déplétion des protéines CAP par interférence à l’ARN dans des vers de type sauvage mène à une augmentation létalité embryonnaire, ce qui suggère que ces protéines jouent un rôle important dans le développement embryonnaire. L'imagerie en temps réel d'embryons déplétés pour les protéines CAP montre qu’ils ont une diminution des contractions corticales avec un sillon de pseudoclivage mois stable, suggérant un défaut dans la régulation du cytosquelette d'actine-myosine. Ceci a également été confirmé par la diminution de la vitesse et du nombre de foci de NMY-2::GFP. En outre, ces embryons montrent une légère diminution de la taille du croissant cortical de PAR-2 lors de la phase d’établissement de la polarité. Les embryons déplétés en CAP-2 montrent également un retard dans la progression du cycle cellulaire, mais le lien entre ce phénotype et la régulation des contractions corticales reste à être précisé. La caractérisation des protéines CAP, des régulateurs du remodelage du cytosquelette, permettra d'améliorer notre compréhension des mécanismes qui sous-tendent l'établissement et le maintien de la polarité cellulaire, et donc la division cellulaire asymétrique.

Promoting reflective assessing practices through narratives: An action research project in early childhood

This project aims at describing the use of Action Research in the development of more structured assessment practices in Early Childhood Portuguese contexts. The teacher had always observed young learners’ activities and progress, and registered them in the form of “critical incidents”. This reflective process structured through this type of narratives helps “tune” the Class Curriculum firstly designed without much knowledge about the kids and so, difficultly responding to their specific needs and interests. The results achieved suggest kids become better prepared to face further education and life. Being early childhood assessment felt by most Portuguese kindergarten teachers as an innovative procedure, the project was seen as the launching of roots for “new” practices.

Novel efficient technologies in Europe for axle bearing condition monitoring – the MAXBE project

Axle bearing damage with possible catastrophic failures can cause severe disruptions or even dangerous derailments, potentially causing loss of human life and leading to significant costs for railway infrastructure managers and rolling stock operators. Consequently the axle bearing damage process has safety and economic implications on the exploitation of railways systems. Therefore it has been the object of intense attention by railway authorities as proved by the selection of this topic by the European Commission in calls for research proposals. The MAXBE Project (http://www.maxbeproject.eu/), an EU-funded project, appears in this context and its main goal is to develop and to demonstrate innovative and efficient technologies which can be used for the onboard and wayside condition monitoring of axle bearings. The MAXBE (interoperable monitoring, diagnosis and maintenance strategies for axle bearings) project focuses on detecting axle bearing failure modes at an early stage by combining new and existing monitoring techniques and on characterizing the axle bearing degradation process. The consortium for the MAXBE project comprises 18 partners from 8 member states, representing operators, railway administrations, axle bearing manufactures, key players in the railway community and experts in the field of monitoring, maintenance and rolling stock. The University of Porto is coordinating this research project that kicked-off in November 2012 and it is completed on October 2015. Both on-board and wayside systems are explored in the project since there is a need for defining the requirement for the onboard equipment and the range of working temperatures of the axle bearing for the wayside systems. The developed monitoring systems consider strain gauges, high frequency accelerometers, temperature sensors and acoustic emission. To get a robust technology to support the decision making of the responsible stakeholders synchronized measurements from onboard and wayside monitoring systems are integrated into a platform. Also extensive laboratory tests were performed to correlate the in situ measurements to the status of the axle bearing life. With the MAXBE project concept it will be possible: to contribute to detect at an early stage axle bearing failures; to create conditions for the operational and technical integration of axle bearing monitoring and maintenance in different European railway networks; to contribute to the standardization of the requirements for the axle bearing monitoring, diagnosis and maintenance. Demonstration of the developed condition monitoring systems was performed in Portugal in the Northern Railway Line with freight and passenger traffic with a maximum speed of 220 km/h, in Belgium in a tram line and in the UK. Still within the project, a tool for optimal maintenance scheduling and a smart diagnostic tool were developed. This paper presents a synthesis of the most relevant results attained in the project. The successful of the project and the developed solutions have positive impact on the reliability, availability, maintainability and safety of rolling stock and infrastructure with main focus on the axle bearing health.

The complexity in the implementation process of empowerment-based chronic kidney care: a case study

Background: This study is part of an interactive improvement intervention aimed to facilitate empowerment-based chronic kidney care using data from persons with CKD and their family members. There are many challenges to implementing empowerment-based care, and it is therefore necessary to study the implementation process. The aim of this study was to generate knowledge regarding the implementation process of an improvement intervention of empowerment for those who require chronic kidney care. Methods: A prospective single qualitative case study was chosen to follow the process of the implementation over a two year period. Twelve health care professionals were selected based on their various role(s) in the implementation of the improvement intervention. Data collection comprised of digitally recorded project group meetings, field notes of the meetings, and individual interviews before and after the improvement project. These multiple data were analyzed using qualitative latent content analysis. Results: Two facilitator themes emerged: Moving spirit and Encouragement. The healthcare professionals described a willingness to individualize care and to increase their professional development in the field of chronic kidney care. The implementation process was strongly reinforced by both the researchers working interactively with the staff, and the project group. One theme emerged as a barrier: the Limitations of the organization. Changes in the organization hindered the implementation of the intervention throughout the study period, and the lack of interplay in the organization most impeded the process. Conclusions: The findings indicated the complexity of maintaining a sustainable and lasting implementation over a period of two years. Implementing empowerment-based care was found to be facilitated by the cooperation between all involved healthcare professionals. Furthermore, long-term improvement interventions need strong encouragement from all levels of the organization to maintain engagement, even when it is initiated by the health care professionals themselves.

Teaching / learning process through the case method in the law degree

This project in teaching innovation and improvement aims to disseminate the case method as one of the most innovative educational instruments inteaching of Law in general, and specifically with regard to Family and Inheritance Law. The methodology used ensures learning through a legal conflict, which must be resolved by the students themselves from different viewpoints as legal agents. This is an activity in teaching innovation, in which students become the protagonists. Participation is voluntary, and the main aim is student motivation. The subject's aim is for students to learn public speaking skills fundamental to the profession while familiarising themselves with judicial practice. Theteacher sets up a legal conflict in order for students to resolve the dispute as legal agents with divergent viewpoints - in other words, as judges, attorneys, lawyers and so on. The project seeks alternatives to traditional teaching methods and is an innovative teaching method aimed at professionally training future lawyers as well as being a model that involves students more in their own learning.

When the virtual influences reality. The conservation project of the toledo gate in ciudad real (Spain)

The Toledo Gate of Ciudad Real, Spain, constructed between the late 13th and early 14th centuries, is the last remaining portion of a once complete medieval city wall. It represents the long history of the city and constitutes its main heritage symbol, dividing the historic city centre from the later 19th and 20th century expansions. In October 2012, the Town Hall and the Montemadrid Foundation started the conservation works to preserve this important monument. The preliminary phase of this project included an in-depth series of scientific studies which were carried out by a multidisciplinary team focusing on archival research, historic investigations, archaeological excavations as well as material composition analysis and main treatment application tests. As a result of these studies a series of virtual 3D models were created to inform, discuss and study the monument. A first digital model permitted visualization of the gate in the 19th century and how the main entrance to the city was integrated as a fundamental part of the city walls. This virtual reconstruction also became an important part of the campaign to raise awareness among the citizens towards a monument that had remained in the shadows for the last century, isolated in a roundabout after the systematic demolition of the city walls in the late 19th century. Over the last three years and as a result of these archaeological and historic investigations and subsequent virtual models, surprisingly new and interesting data were brought to light thus permitting the establishment and corroboration of a new and updated hypothesis of the Toledo Gate that goes beyond the previous ideas. As a result of these studies a new architectural typology with construction techniques of has been suggested. This paper describes how the results of this continuous and interdisciplinary documentation process have benefitted from a computer graphic reconstruction of the gate. It highlights how virtual reconstruction can be a powerful tool for conservation decision making and awareness raising. Furthermore, the interesting results of the final reconstruction hypothesis convinced the technical team responsible for the conservation to alter some aspects of the final project physical interventions in order to focus on some of the features and conclusions discovered through the virtual model study.

Enhancement to the Mortgage Licensing Process

The Consumer Finance Division of the South Carolina State Board of Financial Institutions is responsible for the supervision, licensing and examination of all consumer finance companies, deferred presentment companies, check cashing companies, and non-depository mortgage lenders and their loan originators. This project specifically focuses on the licensing of Mortgage Lender/Servicer ( company), Mortgage Lender/Servicer Branch (branch) and Mortgage Loan Originator (loan originator) licenses. The problem statement is how the Division can handle increasing the number of mortgage loan originators in the state without delaying the time to process applications. The goal of this project is to make the current licensing process more efficient so that the Division can handle the increased workload without having to hire additional personnel.

Improving the Asset Inventory Process

The South Carolina Department of Education (SCDE) is required by the State of South Carolina to provide an accurate physical count of all Capitalized assets listed on their inventory by the end of the fiscal year. There were no published procedures for employees to follow as guidelines for identifying, tracking, reporting and disposing of assets. This has led to errors in identifying items that require asset numbers, completing the shopping carts and transfer/disposal of assets. These errors cause additional work for the Asset Accountant, Procurement Analyst and Accounts Payable Supervisor. The scope of this project is to improve the fixed asset process by developing and publishing asset inventory procedures to ensure accountability and accuracy of all item listed on SCDE inventory.

Improving the Efficiency of the South Carolina Real Estate Commission's License Renewal Process

The goal of this project is to increase the amount of successful real estate license renewals while reducing the disruption caused by manual processing and calls for assistance with renewals and technical issues. The data utilized in this project will demonstrate that the Real Estate Commission renewal process can be improved by utilizing electronic resources such as more detailed website information and repeat e-mail notices, through modifications to the online renewal process to reduce applicant error, and by increasing the visibility of online renewal log-in instructions while decreasing the visibility and use of mail-in applications.

Using Kofax Solutions for Process Improvement

One of the ways the South Carolina State Housing Finance and Development Authority fulfills this mission is through the purchase and servicing of mortgage loans. The 2007 Recession resulted in decreased revenues for the department while higher default, foreclosure and bankruptcy rates increased the department's manpower cost. The agency has since acquired different servicing software which complies with current industry regulations and is once again servicing the loans that it purchases. This project is to see if the department could improve any of their overall processes by using existing technologies and software to better utilize the new servicing system while minimizing manual tasks. This paper explores whether the existing Kofax Document Recognition system could improve this process and reduce overall employee time and effort?

Utilizing Electronic Signatures and Electronic Form Filling to Streamline Document Approval Process

This CPM project focuses on the document approval process that the Division of State Human Resources consulting team utilizes as it relates to classification and compensation requests, e.g. job reclassifications, PD update requests, and salary requests. The ultimate goal is to become more efficient by utilizing electronic signatures and electronic form filling to streamline the current process of document approvals.