Effects of Yb concentration on the fluorescence spectra of Yb-doped YAlO3 single crystals

0.5 at.% Yb:YAlO3(YAP), 5 at.% Yb:YAP and 15 at.% Yb:YAP were grown using the Czochralski method. Their absorption and fluorescence spectra were measured at room temperature and their emission line shape was calculated using the method of reciprocity. It was observed that the fluorescence spectra changed appreciably with the increasing of Yb concentration. For 0.5 at.% Yb:YAP, the line shape of fluorescence is very similar with the calculated emission line shape; with the increasing of Yb doping concentration, the line shape of fluorescence is very different from the calculated emission line shape. These phenomena are caused by the strong self-absorption at 979 and 999 nm for Yb:YAP. (c) 2005 Elsevier B.V. All rights reserved.

Influence of carbon on the thermoluminescence and optically stimulated luminescence of α -Al2O3:C crystals

alpha-Al2O3:C crystal shows excellent thermoluminescence (TL) and optically stimulated luminescence (OSL) properties but the real role carbon plays in this crystal is still not clearly understood so far. In this work, alpha-Al2O3:C crystal doping with different amounts of carbon were grown by the temperature gradient technique, and TL and OSL properties of as-grown crystals were investigated. Additionally, a mechanism was proposed to explain the role of carbon in forming the TL and OSL properties of alpha-Al2O3:C. TL and OSL intensities of as-grown crystals increase with the increasing amount of carbon doping in the crystal, but no shift is found in the glow peak location at 465 K. As the amount of carbon doping in the crystals decreases, OSL decay rate becomes faster. With the increase in heating rate, the integral TL response of as-grown crystals decreases and glow peak shifts to higher temperatures. TL response decrease rate increases with the increasing amount of carbon doping in the crystals. All the TL and OSL response curves of as-grown crystals show linear-sublinear-saturation characteristic, and OSL dose response exhibits higher sensitivity and wider linear dose range than that of TL. The crystal doping with 5000 ppm carbon shows the best dosimetric properties. Carbon plays the role of a dopant in alpha-Al2O3:C crystal and four-valent carbon anions replace the two-valent anions of oxygen during the crystal growth process, and large amounts of oxygen vacancies were formed, which corresponds to the high absorption coefficient of F and F+ centers in the crystals.

Linefish resources annual report for the year 2000. Part 3: towards a management plan for the Mozambican line fishery

The dependence of Mozambique on its marine resources is highly significant. There is a need for a plan of action for sustainable use of these important resources, for the benefit of the nation. In this document, some aspects are included, that can be important to take into consideration for a sound action plan for the lin fishery of Mozambique.

Electric fishing survey of the gravel addition sites on the River Wyre, Grizedale Beck and Joshua's Beck.

Although geographically the River Wyre lies between two rivers containing major migrations of adult salmon and sea trout, its rod & line fisheries have for a number of years produced exceptionally low catches. In order to determine the causes of this the Wyre Salmon and Sea trout Restoration Group (WSSRG) was conceived in 1994 as a partnership between the then National Rivers Authority (now Environment Agency), local landowners, angling clubs and interested parties. Two studies of 1994 and 1995 stated that there is a shortage of useable spawning gravels on the river. This is compounded by Abbeystead Reservoir acting as a gravel trap, the siltation of gravels on several side becks and problems with access to available gravels by returning adults. There was also perceived to be a need for accurate fishery data from the river encompassing redd counts, catch data and surveys of fry populations. The 1995 report suggested a number of management proposals which might be adopted in order to improve and create available spawning habitat for migratory salmonids. Funding was made available to create three spawning gravels on each of two side becks (Grizedale Beck and Joshua's Beck) and the addition of gravels to a site oh the main river below Abbeystead Reservoir. Modifications were also made to the fish pass at Abbeystead to allow easier passage of fish. These improvements were made in the autumn of 1995. Salmonid spawning redd counting was undertaken on the whole Wyre catchment in 1995/1996 and specific surveys by electric fishing on the gravel enhancement sites in the summer of 1996. This report details the current state of the improvement works that were undertaken and presents the results of electric fishing surveys in September 1996. A number of lessons have been learnt which will be of great benefit to the Fisheries Function in other parts of the Wyre catchment and the Central Area in general.

Field validation of the 'Logie' fish counter at Forge weir on the River Lune, 1992

The stock assessment task group report (1991) mentions that fish counters could play a key role in providing data on the size of the adult stock, and in particular the migratory salmonid stock. This report assesses the performance of the 'logie' fish counter at Forge Weir on the River Lune. Using video surveillance, a total of 1137 hours time lapse and 15 hours real time were used for validation purposes. This report looks at materials and methods, counting accuracy, sizing ability and environmental conditions, performance across the electrode array and salmonid swimming speed.

Feedback on the Rate and Depth of Chest Compressions during Cardiopulmonary Resuscitation Using Only Accelerometers

Background Quality of cardiopulmonary resuscitation (CPR) is key to increase survival from cardiac arrest. Providing chest compressions with adequate rate and depth is difficult even for well-trained rescuers. The use of real-time feedback devices is intended to contribute to enhance chest compression quality. These devices are typically based on the double integration of the acceleration to obtain the chest displacement during compressions. The integration process is inherently unstable and leads to important errors unless boundary conditions are applied for each compression cycle. Commercial solutions use additional reference signals to establish these conditions, requiring additional sensors. Our aim was to study the accuracy of three methods based solely on the acceleration signal to provide feedback on the compression rate and depth. Materials and Methods We simulated a CPR scenario with several volunteers grouped in couples providing chest compressions on a resuscitation manikin. Different target rates (80, 100, 120, and 140 compressions per minute) and a target depth of at least 50 mm were indicated. The manikin was equipped with a displacement sensor. The accelerometer was placed between the rescuer's hands and the manikin's chest. We designed three alternatives to direct integration based on different principles (linear filtering, analysis of velocity, and spectral analysis of acceleration). We evaluated their accuracy by comparing the estimated depth and rate with the values obtained from the reference displacement sensor. Results The median (IQR) percent error was 5.9% (2.8-10.3), 6.3% (2.9-11.3), and 2.5% (1.2-4.4) for depth and 1.7% (0.0-2.3), 0.0% (0.0-2.0), and 0.9% (0.4-1.6) for rate, respectively. Depth accuracy depended on the target rate (p < 0.001) and on the rescuer couple (p < 0.001) within each method. Conclusions Accurate feedback on chest compression depth and rate during CPR is possible using exclusively the chest acceleration signal. The algorithm based on spectral analysis showed the best performance. Despite these encouraging results, further research should be conducted to asses the performance of these algorithms with clinical data.

On the trail of interannual variability in phytoplankton and climate [abstract and figures]

EXTRACT (SEE PDF FOR FULL ABSTRACT): A selective but nontheless real record of phytoplankton activity over the Santa Barbara Basin can be obtained from the underlying varved sediments. The phytoplankton groups preserved are: diatoms (frustrules and spores), silicoflagellates, dinoflagellates (cysts) and coccoliths.

Age and growth of the estuarine dolphin (Sotalia guianensis) (Cetacea, Delphinidae) on the Paraná Coast, southern Brazil

Teeth of 71 estuarine dolphins (Sotalia guianensis) incidentally caught on the coast of Paraná State, southern Brazil, were used to estimate age. The oldest male and female dolphins were 29 and 30 years, respectively. The mean distance from the neonatal line to the end of the first growth layer group (GLG) was 622.4 ±19.1 μm (n=48). One or two accessory layers were observed between the neonatal line and the end of the first GLG. One of the accessory layers, which was not always present, was located at a mean of 248.9 ±32.6 μm (n=25) from the neonatal line, and its interpretation remains uncertain.The other layer, located at a mean of 419.6 ±44.6 μm (n=54) from the neonatal line, was always present and was first observed between 6.7 and 10.3 months of age. This accessory layer could be a record of weaning in this dolphin. Although no differences in age estimates were observed between teeth sectioned in the anterior-posterior and buccal-lingual planes, we recommend sectioning the teeth in the buccal-lingual plane in order to obtain on-center sections more easily. We also recommend not using teeth from the most anterior part of the mandibles for age estimation. The number of GLGs counted in those teeth was 50% less than the number of GLGs counted in the teeth from the median part of the mandible of the same animal. Although no significant difference (P>0.05) was found between the total lengths of adult male and female estuarine dolphins, we observed that males exhibited a second growth spurt around five years of age. This growth spurt would require that separate growth curves be calculated for the sexes. The asymptotic length (TL∞), k, and t0 obtained by the von Bertalanffy growth model were 177.3 cm, 0.66, and –1.23, respectively, for females and 159.6 cm, 2.02, and –0.38, respectively, for males up to five years, and 186.4 cm, 0.53 and –1.40, respectively, for males older than five years. The total weight (TW)/total length (TL) equations obtained for male and female estuarine dolphins were TW = 3.156 × 10−6 × TL 3.2836 (r=0.96), and TW = 8.974 × 10−5 × TL 2.6182 (r=0.95), respectively.

On the use of different natural baits for sea-fishing in India

Rod and line, hand-line, trolling line and fish-traps are the different types of fishing gears wherein suitable fish baits are employed with a view to luring the catch. The coastal fishermen of India mostly use different types of natural fish-baits to catch fishes like Perches, Carangids, Sciaenids, Scombroids and Elasmobranchs. The reactions of the fishes caught to the different baits used are quite varied. Successful line fishing operations very much depend on the fish-baits. A detailed record of the variety of fishes caught, types of fishing and different baits used by the coastal fishermen of India has been made.

On the comparative efficiency of conventional and bulged belly fish trawls

To ensure a greater vertical opening while under tow, a trawl net with a bulged belly was made and compared with a conventional design under actual fishing conditions. It was found that the new design landed 31.8% more fish. Since the percentage lateral spread was relatively less for the bulged belly net, it was inferred that this net had higher head line height, while under operation and this was further substantiated by a greater catch of off—bottom fishes. Further, half the quantity of twine can be saved by changing the conventional trawl to that of bulged belly type.

On the relative utility of different methods to increase the vertical height in an otter trawl

Comparative fishing experiments to study the relative utility of different methods for increased vertical spread of bottom trawl and the availability of off bottom fishes in the region were made using gussets, kite, separate float line and side panels on a two seam net. The catch rates as well as composition of fish were studied. The opening of the trawl mouth, both horizontally and vertically, under different operating gears and towing tension on warps were measured and estimated for comparison purposes. Better catch rate with good quality fishes was obtained with the gear operated with separate float line. With kite, the vertical spread was increased with less catch indicating poor concentration of off bottom fishes.

A report on the fisheries of Uganda investigated by the Cambridge Expedition to the East African Lakes, 1930-31

There was very little previous information to use as a basis for work on Lakes Edward and George, but fortunately the region had been mapped in some detail by the Uganda-Congo Boundary Commission of 1906-08. This map served as a satisfactory foundation, but the western Congo shoreline of Lake Edward was inserted only by a dotted line, and a number of inaccuracies, particularly with regard to the islands and littoral of L. George, came to light during our survey.

The effect of surface hardening on the elastic shakedown of elliptical contacts

The effect of varying both the aspect ratio and the coefficient of friction of contacts with elliptical geometry on their elastic shakedown performance has been examined theoretically for surfaces with two types of subsurface hardness or strength profiles. In stepwise hardening the hard layer is of uniform strength while in linear hardening its strength reduces from a maximum at the surface to that of the core at the base of the hardened layer. The shakedown load is expressed as the ratio of the maximum Hertzian pressure to the strength of the core material. As the depth of hardening, expressed as a multiple of the elliptical semi-axis, is increased so the potential shakedown load increases from a level that is appropriate to a uniform half-space of unhardened material to a value reflecting the hardness of the surface and near-surface material. In a step-hardened material, the shakedown limit for a surface 'pummelled' by the passage of a sequence of such loads reaches a cut-off or plateau value, which cannot be exceeded by further increases in hardening depth irrespective of the value of the friction coefficient. For a linear-hardened material the corresponding plateau is approached asymptotically. The work confirms earlier results on the upper bounds on shakedown of both point and line contacts and provides numerical values of shakedown loads for intermediate geometries. In general, the case depth required to achieve a given shakedown limit reduces in moving from a transversely moving nominal line load to an axisymmetric point load.

Influence of the state of the inlet endwall boundary layer on the interaction between pressure surface separation and endwall flows

This paper describes the effect of the state of the inlet boundary layer (laminar or turbulent) on the structure of the endwall flow on two different profiles of low-pressure (LP) turbine blades (solid thin and hollow thick). At present the state of the endwall boundary layer at the inlet of a real LP turbine is not known. The intention of this paper is to show that, for different designs of LP turbine, the state of the inlet boundary layer affects the performance of the blade in very different ways. The testing was completed at low speed in a linear cascade using area traversing, flow visualization and static pressure measurements. The paper shows that, for a laminar inlet boundary layer, the two profiles have a similar loss distribution and structure of endwall flow. However, for a turbulent inlet boundary layer the two profiles are shown to differ significantly in both the total loss and endwall flow structure. The pressure side separation bubble on the solid thin profile is shown to interact with the passage vortex, causing a higher endwall loss than that measured on the hollow thick profile.

Coastal development and pollution impact on the distribution of macrobenthic communities along the eastern coast of the Gulf of Suez (Egypt)

The configuration for the eastern side of the Gulf of Suez was studied over 241 km from Ras Mohammed to Ras Sudr including 35 station. Litters, tar balls and aged oil patches aggregated in considerable amounts on the beach and shore line of the middle part due to the oil spills from off-shore oil wells. A large reef flat in the shallow intertidal waters exists at stations 1 and 2 (Ras Mohammed, Protected area) and spars coral patches are less frequent at the Stations from 7 to 13. Density and diversity of marine benthos were higher on hard and cobble bottoms compared to muddy sand and sandy substrates. The assemblages of the benthic fauna are dominated by the gastropod Courmya (Thericium) vulgata; the bivalve Brachiodontes variabilis, and the barnacles Chthamalus stellatus, Balanus amphitrite and Tetraclita rubescens. The distribution of the algal cover in the intertidal region shows high abundance of the brown algae, Sargassum latifolium; padina pavonica and Cystoseira trinodis rather than the green and red algae. These species are found in both polluted and unpolluted areas. The changes in benthic structures in the study area depend not only on the state of pollution but also on the type of substrates.