Influence of different light sources and photo-activation methods on degree of conversion and polymerization shrinkage of a nanocomposite resin

The purpose of this study was to evaluate the influence of different light sources and photo-activation methods on degree of conversion (DC%) and polymerization shrinkage (PS) of a nanocomposite resin (Filtek (TM) Supreme XT, 3M/ESPE). Two light-curing units (LCUs), one halogen-lamp (QTH) and one light-emitting-diode (LED), and two different photo-activation methods (continuous and gradual) were investigated in this study. The specimens were divided in four groups: group 1-power density (PD) of 570 mW/cm(2) for 20 s (QTH); group 2-PD 0 at 570 mW/cm(2) for 10 s + 10 s at 570 mW/cm(2) (QTH); group 3-PD 860 mW/cm(2) for 20 s (LED), and group 4-PD 125 mW/cm(2) for 10 s + 10 s at 860 mW/cm(2) (LED). A testing machine EMIC with rectangular steel bases (6 x 1 x 2 mm) was used to record the polymerization shrinkage forces (MPa) for a period that started with the photo-activation and ended after two minutes of measurement. For each group, ten repetitions (n = 40) were performed. For DC% measurements, five specimens (n = 20) for each group were made in a metallic mold (2 mm thickness and 4 mm diameter, ISO 4049) and them pulverized, pressed with bromide potassium (KBr) and analyzed with FT-IR spectroscopy. The data of PS were analyzed by Analysis of Variance (ANOVA) with Welch`s correction and Tamhane`s test. The PS means (MPa) were: 0.60 (G1); 0.47 (G2); 0.52 (G3) and 0.45 (G4), showing significant differences between two photo-activation methods, regardless of the light source used. The continuous method provided the highest values for PS. The data of DC% were analyzed by Analysis of Variance (ANOVA) and shows significant differences for QTH LCUs, regardless of the photo-activation method used. The QTH provided the lowest values for DC%. The gradual method provides lower polymerization contraction, either with halogen lamp or LED. Degree of conversion (%) for continuous or gradual photo-activation method was influenced by the LCUs. Thus, the presented results suggest that gradual method photo-activation with LED LCU would suffice to ensure adequate degree of conversion and minimum polymerization shrinkage.

FT-IR spectroscopy assessment of aesthetic dental materials irradiated with low-dose therapeutic ionizing radiation

The aim of the present study was to evaluate the effects of low-dose therapeutic ionizing radiation on different aesthetic dental materials. Forty five specimens (n = 45) of three different aesthetic restorative materials were prepared and randomly divided into five groups: G1 (control group); G2, G3, G4, G5 experimental groups irradiated respectively with 0.25, 0.50, 0.75, and 1.00 Gy of gamma radiation by the (60)Co teletherapy machine. Chemical analyses were performed using a FT-IR Nicolet 520 spectrophotometer with reflectance diffuse technique. Even a minimal exposition at ionizing radiation in therapeutic doses can provide chemical changes on light-cured composite resins. The three studied restorative materials showed changes after exposure at gamma radiation, however the increase of the radiation dose did not contribute to an increase in this effect.

Experimental evidence and model explanation for cell population characteristics modification when applying sequential photodynamic therapy

We present experimental evidence of the existence of cell variability in terms of threshold light dose for Hep G2 (liver cancer cells) cultured. Using a theoretical model to describe the effects caused by successive photodynamic therapy (PDT) sessions, and based on the consequences of a partial response we introduce the threshold dose distribution concept within a tumor. The experimental model consists in a stack of flasks, and simulates subsequent layers of a tissue exposed to PDT application. The result indicates that cells from the same culture could respond in different ways to similar PDT induced-damages. Moreover, the consequence is a partial killing of the cells submitted to PDT, and the death fraction decreased at each in vitro PDT session. To demonstrate the occurrence of cell population modification as a response to PDT, we constructed a simple theoretical model and assumed that the threshold dose distribution for a cell population of a tumor is represented by a modified Gaussian distribution.

Increased Viability of Odontoblast-Like Cells Subjected to Low-Level Laser Irradiation

Studies have shown that the increase of cell metabolism depends on the low level laser therapy (LLLT) parameters used to irradiate the cells. However, the optimal laser dose to up-regulate pulp cell activity remains unknown. Consequently, the aim of this study was to evaluate the metabolic response of odontoblast-like cells (MDPC-23) exposed to different LLLT doses. Cells at 20000 cells/cm(2) were seeded in 24-well plates using plain culture medium (DMEM) and were incubated in a humidified incubator with 5% CO(2) at 37 degrees C. After 24 h, the culture medium was replaced by fresh DMEM supplemented with 5% (stress by nutritional deficit) or 10% fetal bovine serum (FBS). The cells were exposed to different laser doses from a near infrared diode laser prototype designed to provide a uniform irradiation of the wells. The experimental groups were: G1: 1.5 J/cm(2) + 5% FBS; G2: 1.5 J/cm(2) + 10% FBS; G3: 5 J/cm(2) + 5% FBS; G4: 5 J/cm(2) + 10% FBS; G5: 19 J/cm(2) + 5% FBS; G6: 19 J/cm(2) + 10% FBS. LLLT was performed in 3 consecutive irradiation cycles with a 24-hour interval. Non-irradiated cells cultured in DMEM supplemented with either 5 or 10% FBS served as control groups. The analysis of the metabolic response was performed by the MTT assay 3 h after the last irradiation. G1 presented an increase in SDH enzyme activity and differed significantly (Mann-Whitney test, p < 0.05) from the other groups. Analysis by scanning electron microscopy showed normal cell morphology in all groups. Under the tested conditions, LLLT stimulated the metabolic activity of MDPC-23 cultured in DMEM supplemented with 5% FBS and exposed to a laser dose of 1.5 J/cm(2). These findings are relevant for further studies on the action of near infrared lasers on cells with odontoblast phenotype.

Saliva flow rate, buffer capacity, and pH of autistic individuals

The objective of the study was to evaluate saliva flow rate, buffer capacity, pH levels, and dental caries experience (DCE) in autistic individuals, comparing the results with a control group (CG). The study was performed on 25 noninstitutionalized autistic boys, divided in two groups. G1 composed of ten children, ages 3-8. G2 composed of 15 adolescents ages 9-13. The CG was composed of 25 healthy boys, randomly selected and also divided in two groups: CG3 composed of 14 children ages 4-8, and CG4 composed of 11 adolescents ages 9-14. Whole saliva was collected under slight suction, and pH and buffer capacity were determined using a digital pHmeter. Buffer capacity was measured by titration using 0.01 N HCl, and the flow rate expressed in ml/min, and the DCE was expressed by decayed, missing, and filled teeth (permanent dentition [DMFT] and primary dentition [dmft]). Data were plotted and submitted to nonparametric (Kruskal-Wallis) and parametric (Student`s t test) statistical tests with a significance level less than 0.05. When comparing G1 and CG3, groups did not differ in flow rate, pH levels, buffer capacity, or DMFT. Groups G2 and CG4 differ significantly in pH (p = 0.007) and pHi = 7.0 (p = 0.001), with lower scores for G2. In autistic individuals aged 3-8 and 9-13, medicated or not, there was no significant statistical difference in flow rate, pH, and buffer capacity. The comparison of DCE among autistic children and CG children with deciduous (dmft) and mixed/permanent decayed, missing, and filled teeth (DMFT) did not show statistical difference (p = 0.743). Data suggest that autistic individuals have neither a higher flow rate nor a better buffer capacity. Similar DCE was observed in both groups studied.

Spectroscopic and theoretical studies of some N-methoxy-N-methyl-2-[(4 `-substituted) phenylsulfonyl]propanamides

The analysis of the IR carbonyl band of the N-methoxy-N-methyl-2-[(4`-substituted)phenyisulfonyI]propanamides Y-PhSO(2)CH(Me)C(O)N(OMe)Me (Y = OMe 1, Me 2, H 3, Cl 4, NO(2) 5), supported by HF/6-31G(d,p) calculations of 3,, indicated the existence of two gauche conformers (g(1) and g(2)), the g, conformer being the most stable and the least polar one (in gas phase and in solution). Both conformers are present in solution of the non polar solvent (CCl(4)) for 1-5 and in solution of the more polar solvents (CHCl(3)) for 1. 4, 5 and (CH(2)Cl(2)) for 5, while only the g(1) conformer is present in solution of the most polar solvent (CH(3)CN) for 1-5. The g, and g2 conformers correspond to the enantiomeric pairs of diastereomers (diast(1) and diast(2)) whose relative configurations are [C(3)(R)N(R)]/[C(3)(s)N(s)] and [C(3)(R)N(s)]/[C(3)(s)N(R)], respectively. The computed carbonyl frequencies for g(1) (diast(1)) and g(2) (diast(2)) stereoisomers of3 match well the experimental values. The NBO analysis, for 3 shows the important role of the orbital interactions in conformer stabilization and the overall balance of these interactions corroborates that the g, conformer is more stable than the 92 one. The observed abnormal solvent effect on the relative intensities of the carbonyl doublet components is attributed to the molecular crowding in the g2 conformer which hinders its solvation in comparison to the g, conformer (diast(1)). X-ray single crystal analysis performed for 3 shows the existence Of two 92, and g(1b) conformers of diastereomers (diast2, and diast(1b)) whose absolute configurations are [C(3)(R)N(s)] and [C(3)(R)N(R)], respectively. The larger population and. thus, the larger stabilization of the g(2), conformer over the gib form in the crystals may be associated with a larger energy gain deriving from dipole moment coupling in the former conformer along with a series of C-H center dot center dot center dot O electrostatic and hydrogen bond interactions, (C) 2009 Elsevier B.V. All rights reserved.

QoS Evaluation of BandwidthSchedulers in IPTV Networks OfferedSRD Fluid Video Traffic

Internet protocol TV (IPTV) is predicted to be the key technology winner in the future. Efforts to accelerate the deployment of IPTV centralized model which is combined of VHO, encoders, controller, access network and Home network. Regardless of whether the network is delivering live TV, VOD, or Time-shift TV, all content and network traffic resulting from subscriber requests must traverse the entire network from the super-headend all the way to each subscriber's Set-Top Box (STB).IPTV services require very stringent QoS guarantees When IPTV traffic shares the network resources with other traffic like data and voice, how to ensure their QoS and efficiently utilize the network resources is a key and challenging issue. For QoS measured in the network-centric terms of delay jitter, packet losses and bounds on delay. The main focus of this thesis is on the optimized bandwidth allocation and smooth datatransmission. The proposed traffic model for smooth delivering video service IPTV network with its QoS performance evaluation. According to Maglaris et al [5] First, analyze the coding bit rate of a single video source. Various statistical quantities are derived from bit rate data collected with a conditional replenishment inter frame coding scheme. Two correlated Markov process models (one in discrete time and one incontinuous time) are shown to fit the experimental data and are used to model the input rates of several independent sources into a statistical multiplexer. Preventive control mechanism which is to be include CAC, traffic policing used for traffic control.QoS has been evaluated of common bandwidth scheduler( FIFO) by use fluid models with Markovian queuing method and analysis the result by using simulator andanalytically, Which is measured the performance of the packet loss, overflow and mean waiting time among the network users.

QoS evaluation of bandwidth schedulersin IPTV networks offered SRD fluidvideo traffic: a simulation study

IPTV is now offered by several operators in Europe, US and Asia using broadcast video over private IP networks that are isolated from Internet. IPTV services rely ontransmission of live (real-time) video and/or stored video. Video on Demand (VoD)and Time-shifted TV are implemented by IP unicast and Broadcast TV (BTV) and Near video on demand are implemented by IP multicast. IPTV services require QoS guarantees and can tolerate no more than 10-6 packet loss probability, 200 ms delay, and 50 ms jitter. Low delay is essential for satisfactory trick mode performance(pause, resume,fast forward) for VoD, and fast channel change time for BTV. Internet Traffic Engineering (TE) is defined in RFC 3272 and involves both capacity management and traffic management. Capacity management includes capacityplanning, routing control, and resource management. Traffic management includes (1)nodal traffic control functions such as traffic conditioning, queue management, scheduling, and (2) other functions that regulate traffic flow through the network orthat arbitrate access to network resources. An IPTV network architecture includes multiple networks (core network, metronetwork, access network and home network) that connects devices (super head-end, video hub office, video serving office, home gateway, set-top box). Each IP router in the core and metro networks implements some queueing and packet scheduling mechanism at the output link controller. Popular schedulers in IP networks include Priority Queueing (PQ), Class-Based Weighted Fair Queueing (CBWFQ), and Low Latency Queueing (LLQ) which combines PQ and CBWFQ.The thesis analyzes several Packet Scheduling algorithms that can optimize the tradeoff between system capacity and end user performance for the traffic classes. Before in the simulator FIFO,PQ,GPS queueing methods were implemented inside. This thesis aims to implement the LLQ scheduler inside the simulator and to evaluate the performance of these packet schedulers. The simulator is provided by ErnstNordström and Simulator was built in Visual C++ 2008 environmentand tested and analyzed in MatLab 7.0 under windows VISTA.

QoS evaluation of Bandwidth Schedulers in IPTV Networks Offered SRD Fluid Video Traffic

Internet protocol TV (IPTV) is predicted to be the key technology winner in the future. Efforts to accelerate the deployment of IPTV centralized model which is combined of VHO, encoders, controller, access network and Home network. Regardless of whether the network is delivering live TV, VOD, or Time-shift TV, all content and network traffic resulting from subscriber requests must traverse the entire network from the super-headend all the way to each subscriber's Set-Top Box (STB). IPTV services require very stringent QoS guarantees When IPTV traffic shares the network resources with other traffic like data and voice, how to ensure their QoS and efficiently utilize the network resources is a key and challenging issue. For QoS measured in the network-centric terms of delay jitter, packet losses and bounds on delay. The main focus of this thesis is on the optimized bandwidth allocation and smooth data transmission. The proposed traffic model for smooth delivering video service IPTV network with its QoS performance evaluation. According to Maglaris et al [5] first, analyze the coding bit rate of a single video source. Various statistical quantities are derived from bit rate data collected with a conditional replenishment inter frame coding scheme. Two correlated Markov process models (one in discrete time and one in continuous time) are shown to fit the experimental data and are used to model the input rates of several independent sources into a statistical multiplexer. Preventive control mechanism which is to be including CAC, traffic policing used for traffic control. QoS has been evaluated of common bandwidth scheduler( FIFO) by use fluid models with Markovian queuing method and analysis the result by using simulator and analytically, Which is measured the performance of the packet loss, overflow and mean waiting time among the network users.

Cytotoxicity of Diepoxybutane and Epichlorohydrin in Relation to Stages of the Cell Cycle

Work conducted in the Millard Biochemistry Research Laboratory examines the dual nature of molecules as carcinogens and anti-tumor agents through the molecular mechanisms of duplex DNA damage by bifunctional alkylating agents. Diepoxybutane (DEB) and epichlorohydrin (ECH) are polar molecules that form covalent DNA interstrand lesions by cross-linking the N7 position of deoxyguanosine residues. A recent experiment indicated that ECH preferentially targets nuclear DNA over mitochondrial DNA, whereas DEB shows similar rates of lesion formation for both loci. It was concluded that preferential targeting of nuclear DNA results from relatively poor uptake of ECH across the mitochondrial membrane. The objective of my honors research was to determine if the cytotoxicities of DEB and ECH vary according to the presence of the nuclear envelope in 6C2 chicken erythro-progenitor cells. The cytotoxicity of DEB and ECH was compared between cells randomly distributed throughout the cell cycle (Go/G, and S » G2/M) and cells enriched in G2/M stages. Results indicated that ECH is more cytotoxic than DEB in both unsynchronized control 6C2 cells and synchronized 6C2 cells enriched in G2/M stages of the cell cycle. Treatment with either bifunctional alkylating agent induced greater cytotoxicity in 6C2 cells enriched in G2/M stages than in unsynchronized control 6C2 cells, suggesting that the presence of the nuclear envelope-or any plasma membrane-may inhibit the reactivity of DEB and ECH.

Effect of Jersey type on thermoregulatory responses during exercise in a warm humid environment

The thermoregulatory responses of subjects wearing two different forms of rugby league jersey, one with plastic sponsorship recognition and numbering (trial Gl) and one without (trial G2), and a lightweight alternative (trial G3), were compared with a trial without any form of upper body garment (trial GO). Ten male volunteers, mean age 20.9 (±2.3) years, height 179.8 (±4.7) cm, weight 80.2 (±8.9) kg, and body surface area 1.99 (±0.13) m2, participated in this study. Subjects had a mean maximal oxygen uptake capacity of 56.0 (±6.3) ml.kg.min-1 and a sum of 8 skinfolds of 80.6 (±23.8) mm. Subjects were exercised at approximately 50% of maximal oxygen uptake in a warm humid environment for 50 minutes. Mean ambient temperature was 27.6°C (±0.32) with a relative humidity of 64.7% (±1.44). Measurements of core and skin (7 sites) temperature, heart rate, oxygen uptake, plasma volume, peak lactate concentration, and pre- and post-trial body weight, hematocrit and garment weight were recorded. The statistical results showed that all subjects experienced significant (p ≤.0001) decreases in body weight representing a percentage decrease ranging from 1.2-1.3%. No significant difference was found between trials with respect to body weight change. No significant effect of garment type was found on pre- and post-trial hematocrit, plasma volume changes or peak blood lactic acid concentration. However, mean peak lactate was highest for trial Gl (5.6 mmol.L-1 ±2.2) and lowest for trial G3 (4.6 mmol.L-1 ±1.27). Post-trial core temperature was significantly (p≤ .0001) higher than the resting value; no significant difference was found between trials. The mean absolute increase for all experimental trials was 0.9°C. A significant (p≤.005) difference between mean total (7 sites) skin temperature was found with a post-hoc test revealing that trials Gl and G2 were significantly higher than trial GO; no significant difference was found when comparing trial G3 with trial GO or when comparing the garments between each other. Mean skin temperature under the garment (4 sites) was found to be significantly (p≤.05) higher for all trials involving a garment when compared with mean skin temperature outside (3 sites) the garment; no significant difference was found between trials. Mean oxygen uptake was significantly different between trials (p≤.005), with trial Gl and G3 found to be significantly lower than trial GO; no difference was found when comparing the garments with each other. Post-trial garment weights were significantly (p≤.001) heavier than pre-trial and were significantly (p≤.0001) different when compared with each other. There was no significant effect on heart rate, haematocrit, plasma volume changes, peak blood lactic acid concentration, or core temperature due to garment type. However, differences in skin temperature suggest that the garment used in trial G3 may have a benefit. Further research should consider the impact of increased exercise intensity and/or environmental temperature and humidity on the measured parameters while wearing the garments described in this study.

PPARγ ligands, 15-deoxy-Δ12,14-prostaglandin J2 and rosiglitazone regulate human cultured airway smooth muscle proliferation through different mechanisms

1. The influence of two peroxisome proliferator-activated receptor γ (PPARγ) ligands, a thiazolidinedione, rosiglitazone (RG) and the prostaglandin D2 metabolite 15-deoxy-Δ12,14-prostaglandin J2 (15d-PGJ2) on the proliferation of human cultured airway smooth muscle (HASM) was examined.

2. The increases in HASM cell number in response to basic fibroblast growth factor (bFGF, 300 pm) or thrombin (0.3 U ml−1) were significantly inhibited by either RG (1–10 μm) or 15d-PGJ2 (1–10 μm). The effects of RG, but not 15d-PGJ2, were reversed by the selective PPARγ antagonist GW9662 (1 μm).

3. Neither RG nor 15d-PGJ2 (10 μm) decreased cell viability, or induced apoptosis, suggesting that the regulation of cell number was due to inhibition of proliferation, rather than increased cell death.

4. Flow-cytometric analysis of HASM cell cycle distribution 24 h after bFGF addition showed that RG prevented the progression of cells from G1 to S phase. In contrast, 15d-PGJ2 caused an increase in the proportion of cells in S phase, and a decrease in G2/M, compared to bFGF alone.

5. Neither RG nor 15d-PGJ2 inhibited ERK phosphorylation measured 6 h post mitogen addition. The bFGF-mediated increase in cyclin D1 protein levels after 8 h was reduced in the presence of 15d-PGJ2, but not RG.

6. Although both RG and 15d-PGJ2 can inhibit proliferation of HASM irrespective of the mitogen used, only the antiproliferative effects of RG appear to be PPARγ-dependent. The different antimitogenic mechanisms of 15d-PGJ2 and synthetic ligands for PPARγ may be exploited to optimise the potential for these compounds to inhibit airway remodelling in asthma.

Path planning for CNC machines considering centripetal acceleration and jerk

In planning an s-curve speed profile for a computer numerical control (CNC) machine, centripetal acceleration and its derivative have to be considered. In a CNC machine, these quantities dictate how much voltage and current should be applied to servo motor windings. In this paper, the necessity of considering centripetal jerk in speed profile generation especially in the look-ahead mode is explained. It is demonstrated that the magnitude of centripetal jerk is proportional to the curvature derivative of the path known as "sharpness". It is also explained that a proper limited jerk motion is only possible when a G2-continuous machining path is planned. Then using a simplified mathematical representation of clothoids, a novel method for approximating a given path with a sequence of clothoid segments is proposed. Using this method, a semi-parallel G2-continuous path with adjustable deviation from the original shape for a sample machining contour is generated. Maximum permissible feed rate for the generated path is also calculated.

Plumbagin induces apoptotic and autophagic cell death through inhibition of the PI3K/Akt/mTOR pathway in human non-small cell lung cancer cells.

Plumbagin (PLB) has shown anti-cancer activity but the mechanism is unclear. This study has found that PLB has a potent pro-apoptotic and pro-autophagic effect on A549 and H23 cells. PLB arrests cells in G2/M phase, and increases the intracellular level of reactive oxygen species in both cell lines. PLB dose-dependently induces autophagy through inhibition of PI3K/Akt/mTOR pathway as indicated by reduced phosphorylation of Akt and mTOR. Inhibition or induction of autophagy enhances PLB-induced apoptosis. There is crosstalk between PLB-induced apoptosis and autophagy. These findings indicate that PLB initiates both apoptosis and autophagy in NSCLC cells through coordinated pathways.

Relationship between lower limb neuromuscular performanceand bone strength in postmenopausal women with mild knee osteoarthritis

Objectives: To investigate whether neuromuscular performance predicts lower limb bone strength in different lower limb sites in postmenopausal women with mild knee osteoarthritis (OA). Methods: Neuromuscular performance of 139 volunteer women aged 50-68 with mild knee OA was measured using maximal counter movement jump test, isometric knee flexion and extension force and figure-of-eight-running test. Femoral neck section modulus (Z, mm3) was determined by data obtained from dualenergy X-ray absorptiometry. Data obtained using peripheral quantitative computed tomography was used to asses distal tibia compressive (BSId, g2/cm4) and tibial mid-shaft bending (SSImaxmid, mm3) strength indices. Results: After adjustment for height, weight and age, counter movement jump peak power production was the strongest independent predictor for Z (β=0.44; p<0.001) and for BSId (β=0.32; p=0.003). This was also true in concentric net impulse for Z (β=0.37; p=0.001) and for BSId (β=0.40; p<0.001). Additionally, knee extension force (β=0.30; p<0.001) and figure-of-eight-running test (β= -0.32; p<0.001) were among strongest independent predictors for BSId after adjustments. For SSImaxmid, concentric net impulse (β=0.33; p=0.002) remained as the strongest independent predictor after adjustments. Conclusions: Neuromuscular performance in postmenopausal women with mild knee OA predicted lower limb bone strength in every measured skeletal site.