Proposta e implementação de uma arquitetura reconfigurável híbrida para aplicações baseadas em fluxo de dados

The increase of applications complexity has demanded hardware even more flexible and able to achieve higher performance. Traditional hardware solutions have not been successful in providing these applications constraints. General purpose processors have inherent flexibility, since they perform several tasks, however, they can not reach high performance when compared to application-specific devices. Moreover, since application-specific devices perform only few tasks, they achieve high performance, although they have less flexibility. Reconfigurable architectures emerged as an alternative to traditional approaches and have become an area of rising interest over the last decades. The purpose of this new paradigm is to modify the device s behavior according to the application. Thus, it is possible to balance flexibility and performance and also to attend the applications constraints. This work presents the design and implementation of a coarse grained hybrid reconfigurable architecture to stream-based applications. The architecture, named RoSA, consists of a reconfigurable logic attached to a processor. Its goal is to exploit the instruction level parallelism from intensive data-flow applications to accelerate the application s execution on the reconfigurable logic. The instruction level parallelism extraction is done at compile time, thus, this work also presents an optimization phase to the RoSA architecture to be included in the GCC compiler. To design the architecture, this work also presents a methodology based on hardware reuse of datapaths, named RoSE. RoSE aims to visualize the reconfigurable units through reusability levels, which provides area saving and datapath simplification. The architecture presented was implemented in hardware description language (VHDL). It was validated through simulations and prototyping. To characterize performance analysis some benchmarks were used and they demonstrated a speedup of 11x on the execution of some applications

Pediatric Antiphospholipid Syndrome: Clinical and Immunologic Features of 121 Patients in an International Registry

OBJECTIVES. The purpose of this study was to obtain data on the association of antiphospholipid antibodies with clinical manifestations in childhood and to enable future studies to determine the impact of treatment and long-term outcome of pediatric antiphospholipid syndrome.PATIENTS and METHODS. A European registry extended internationally of pediatric patients with antiphospholipid syndrome was established as a collaborative project of the European Antiphospholipid Antibodies Forum and Lupus Working Group of the Pediatric Rheumatology European Society. To be eligible for enrollment the patient must meet the preliminary criteria for the classification of pediatric antiphospholipid syndrome and the onset of antiphospholipid syndrome must have occurred before the patient's 18th birthday.RESULTS. As of December 1, 2007, there were 121 confirmed antiphospholipid syndrome cases registered from 14 countries. Fifty-six patients were male, and 65 were female, with a mean age at the onset of antiphospholipid syndrome of 10.7 years. Sixty (49.5%) patients had underlying autoimmune disease. Venous thrombosis occurred in 72 (60%), arterial thrombosis in 39 (32%), small-vessel thrombosis in 7 (6%), and mixed arterial and venous thrombosis in 3 (2%). Associated nonthrombotic clinical manifestations included hematologic manifestations (38%), skin disorders (18%), and nonthrombotic neurologic manifestations (16%). Laboratory investigations revealed positive anticardiolipin antibodies in 81% of the patients, anti-beta(2)-glycoprotein I antibodies in 67%, and lupus anticoagulant in 72%. Comparisons between different subgroups revealed that patients with primary antiphospholipid syndrome were younger and had a higher frequency of arterial thrombotic events, whereas patients with antiphospholipid syndrome associated with underlying autoimmune disease were older and had a higher frequency of venous thrombotic events associated with hematologic and skin manifestations.CONCLUSIONS. Clinical and laboratory characterization of patients with pediatric antiphospholipid syndrome implies some important differences between antiphospholipid syndrome in pediatric and adult populations. Comparisons between children with primary antiphospholipid syndrome and antiphospholipid syndrome associated with autoimmune disease have revealed certain differences that suggest 2 distinct subgroups. Pediatrics 2008; 122: e1100-e1107

Período de descanso dos suínos no frigorífico e seu impacto na perda de peso corporal e em características do estômago

O manejo pré-abate dos suínos, quando realizado de maneira inadequada, pode proporcionar perdas qualitativas e quantitativas. O objetivo deste trabalho foi avaliar o efeito do período de descanso dos suínos no frigorífico (PDF) (3, 5, 7 e 9 horas) e da posição do box na carroceria do caminhão (PBO) sobre a perda de peso corporal (PPC), o peso do estômago cheio (PEC) e vazio (PEV), o peso do conteúdo estomacal (PCE) e o escore de lesão na mucosa esofágica-gástrica (ELG). Foram utilizadas 192 fêmeas, com peso vivo médio de 130,0±9,9kg. Para a análise estatística, considerou-se no modelo os efeitos de bloco (BL), relativo à estação do ano e à granja avaliada o PDF, PBO e a interação entre PDF x BL. Não houve efeito significativo do PDF nas variáveis estudadas. Verificou-se efeito significativo da PBO somente sobre a perda de peso corporal dos suínos, sendo que animais transportados na parte da frente perderam mais peso em relação aos transportados nos boxes do meio e de trás. Observou-se que somente 11% dos suínos apresentaram ELG característico de úlcera gástrica e que uma elevada porcentagem de suínos (41,9%) apresentou ELG grau 1, caracterizando paraqueratose. Conclui-se que suínos transportados em boxes localizados na parte frontal da carroceria do caminhão apresentam maior perda de peso corporal do que os demais e que a variação de 3 a 9 horas no período de descanso no frigorífico não afeta a perda de peso corporal nem as características do estômago dos animais.

Modelo de carroceria e seu impacto sobre o bem-estar e a qualidade da carne dos suínos

O objetivo deste trabalho foi avaliar o efeito do modelo de carroceria (MC) (metálica dupla ou simples e simples de madeira) sobre a freqüência de diferentes tipos de lesões na carcaça (FLC) e sobre a qualidade da carne dos suínos. Foram utilizadas 360 fêmeas com peso vivo médio de 132,72±11,09kg. Para a análise estatística, considerou-se no modelo os efeitos de bloco (BL), o MC e a interação entre MC x BL. Verificou-se um efeito do MC sobre a freqüência de lesões na carcaça provenientes de briga e a freqüência total de lesões, sobre o pH1 do músculo Semispinalis capitis (SC), sobre o pH U dos músculos SC, Longissimus dorsi (LD) e Semimembranosus (SM) e sobre a cor dos músculos LD e SM. Suínos transportados em carroceria metálica simples apresentaram maiores valores de pH e da cor dos músculos avaliados. Conclui-se que suínos transportados em carroceria simples apresentam maior prevalência de lesões na carcaça e que o transporte dos suínos em carroceria metálica teve efeito positivo sobre os valores de pH e da cor carne.

Tempo de jejum dos suínos no manejo pré-abate sobre a perda de peso corporal, o peso do conteúdo estomacal e a incidência de úlcera esofágica-gástrica

O objetivo deste trabalho foi avaliar os efeitos do tempo de jejum (9, 12, 15 e 18 horas) dos animais na granja (TJG) e da posição na carroceria do caminhão (PBO) durante o transporte da granja ao frigorífico sobre: a perda de peso corporal (PPC), o peso do estômago cheio (PEC) e vazio (PEV), o peso do conteúdo estomacal (PCE) e o escore de lesão na mucosa esofágica-gástrica (ELG). Foram utilizadas 192 fêmeas, com peso vivo médio de 134,51±11,80kg. No modelo, foram considerados os efeitos de bloco (estação do ano, BL), TJG, PBO e da interação entre BL x TJG. Verificou-se efeito significativo do TJG apenas sobre o peso do conteúdo estomacal. Não se observou efeito significativo da PBO sobre qualquer das variáveis avaliadas. Dos suínos avaliados, 90,3% apresentaram PEC menor que 500 gramas e 8,56% com PEC entre 500 e 800 gramas. A prevalência de suíno com ELG foi baixa (14,97%), sendo que, dos animais com ELG, 13,90% apresentaram lesão de grau 1 e 1,09% eram grau dois. Conclui-se que animais submetidos a jejum na granja de 15 horas apresentam menor peso do conteúdo estomacal ao abate.

Tempo de jejum na granja sobre o perfil hormonal e os parâmetros fisiológicos em suínos de abate pesados

O objetivo deste estudo foi avaliar o tempo de jejum na granja e a posição dos animais na carroceria do caminhão durante o transporte ao abatedouro sobre o status hormonal e fisiológico de suínos de abate pesados visando obter melhorias no manejo pré-abate e reduzir perdas na qualidade de carne. Foram utilizadas 64 fêmeas com peso médio de 133+11kg, oriundas de duas granjas de terminação. Os tempos de jejum avaliados foram nove, 12, 15 e 18h, enquanto que as posições consideradas na carroceria foram box (frente, meio e atrás), piso (inferior e superior) e lado (lateral direita e esquerda). Ao abate, foram medidos os níveis de glicose, lactato e CPK no sangue. A concentração de cortisol na saliva (CCS) foi medida nas granjas (24 horas antes e após embarque) e no abatedouro (logo após o descarregamento e antes do abate). A freqüência cardíaca foi monitorada durante todo o manejo pré-abate. Foi observado o efeito da interação entre TJG e o local de avaliação sobre a CCS e a freqüência cardíaca. A CCS e a freqüência cardíaca aumentaram significativamente da granja ao desembarque no abatedouro em relação ao descanso pré-abate no abatedouro foi observada uma redução (P<0,05) nos valores. A CCS variou em função do TJG e o local de avaliação da seguinte maneira: suínos com 18 horas de jejum apresentaram menor (P<0,05) variação na CCS durante o transcorrer das diferentes etapas do manejo pré-abate do que suínos com TJG menores e, entre estes, os animais com TJG de nove horas apresentaram a maior (P<0,05) variação. Antes do abate, os suínos com TJG de nove horas apresentaram o maior valor (P<0,05) de CCS quando comparados aos outros TJG. Conclui-se que o TJG promove mudanças (P<0,05) nos valores do cortisol na saliva e na freqüência cardíaca no manejo pré-abate, mas não afetam (P>0,05) os níveis de glicose, lactato e CPK no abate dos suínos.

Efeito do manejo pré-abate sobre alguns parâmetros fisiológicos em fêmeas suínas pesadas

O objetivo neste trabalho foi avaliar o efeito do período de descanso (3, 5, 7 e 9 horas) dos suínos no frigorífico (PDF) e da localização dos suínos na carroceria do caminhão (PBO), quando transportados, no inverno ou verão, sobre alguns parâmetros fisiológicos avaliados em 64 fêmeas, com peso médio de 130kg para abate, durante o manejo pré-abate. Para a análise estatística, foram considerados, no modelo de análise da variância, os efeitos de bloco, PDF, PBO e da interação (bloco x PDF), entre outros. O PDF influenciou, significativamente, as concentrações de lactato no sangue e cortisol na saliva. Suínos que descansaram 5 e 7 horas apresentaram maior concentração de lactato em relação aos animais que descansaram 3 e 9 horas. No transporte, a freqüência cardíaca foi muito maior em relação aos demais locais avaliados. Concluiu-se que o incremento do PDF não promove mudanças na freqüência cardíaca, nas concentrações de glicose e CPK no sangue e cortisol na saliva, mas interfere na concentração de lactato no sangue dos suínos.

Effect of mismatching abutments on implants with wider platforms - an experimental study in dogs

Aim: To evaluate the effect of mismatching abutments on implants with a wider platform on the peri-implant hard tissue remodeling and the soft tissue dimensions.Material and methods: Mandibular premolars and first molars of six Labrador dogs were extracted bilaterally. After 3 months of healing, one tapered implant was installed on each side of the mandibular molar region with the implant shoulder placed at the level of the buccal alveolar bony crest. on the right side of the mandible, an abutment of reduced diameter in relation to the platform of the implant was used, creating a mismatch of 0.85 mm (test), whereas an abutment of the same diameter of the implant platform was affixed in the left side of the mandible (control). The flaps were sutured to allow a non-submerged healing. After 4 months, the animals were sacrificed and ground sections were obtained for histometric assessment.Results: All implants were completely osseo-integrated. Bone levels were superior at the test than at the control sites. However, statistically significant differences were found only at the buccal and proximal aspects. The soft tissue vertical dimension was higher at the control compared with the test sites. However, statistically significant differences were demonstrated only at the buccal aspects.Conclusions: A mismatch of 0.85 mm between the implant and the abutment yielded more coronal levels of bone-to-implant contact and a reduced height of the peri-implant soft tissue (biologic width), especially at the buccal aspect, if the implant shoulder was placed flush with the level of the buccal alveolar bony crest.

Establishment of the epithelial attachment and connective tissue adaptation to implants installed under the concept of "platform switching": a histologic study in minipigs

Aim: To validate the platform switching concept at oral implants with respect to the preservation of the alveolar crestal bone levels in an animal model. Material & methods: Five minipigs received three implants each with a 0.25mm implant/ abutment mismatch and were placed flush (T(0)), 1 mm below (T(1)) and 1 mm above (T(+1)) the alveolar bony crest, and as a control, one conventionally restored implant placed at the bone level. The implants were randomly inserted flapless into the mandible. Four months after implant insertion, the animals were sacrificed, and undecalcified block sections were obtained and used for histological analyses. Results: The mean values for peri- implant bone resorption were 1.09 +/- 0.59mm (Control), 0.51 (+/- 0.27 mm, T(0)), 0.50 (+/- 0.46 mm, T(1)) and 1.30 (+/- 0.21 mm, T (+1)), respectively. Statistically significant differences (P< 0.05) were found among the test (T(0), T(-1)) and the control sites. Control implants presented an average biologic width length of 3.20mm (+/- 0.33), with a connective tissue adaptation compartment of 1.29mm (+/- 0.53) and an epithelial attachment of 1.91 mm (+/- 0.71). T(0), T(1) and T(+1) implants presented with a mean biologic width of 1.97mm (+/- 1.20), 2.70 mm (+/- 1.36) and 2.84mm (+/- 0.90), respectively, with a connective tissue adaptation compartment of 1.21mm (+/- 0.97), 1.21 mm (+/- 0.65) and 1.50 mm (+/- 0.70) and an epithelial attachment of 0.84 mm (+/- 0.93), 1.66 mm (+/- 0.88) and 1.35 mm (+/- 0.44), respectively. Differences between the configurations were mainly associated with the length of the epithelial attachment. The epithelial attachment was significantly longer in the C sites than in T(0) (P = 0.014). However, no other differences between configurations were detected. Conclusion: If the implants are positioned at the level of the alveolar bony crest, the platform switching concept may have a minor impact on the length of the epithelial attachment (0.84 vs. 1.91 mm), while the connective tissue adaptation compartment remains relatively unaffected. Moreover, platform switching resulted in less resorption of the alveolar crest (0.58 mm).

The Ped-APS registry: The antiphospholipid syndrome in childhood

In recent years, antiphospholipid syndrome (APS) has been increasingly recognised in various paediatric autoimmune and nonautoimmune diseases, but the relatively low prevalence and heterogeneity of APS in childhood made it very difficult to study in a systematic way. The project of an international registry of paediatric patients with APS (the Ped-APS Registry) was initiated in 2004 to foster and conduct multicentre, controlled studies with large number of paediatric APS patients. The Ped-APS Registry is organised as a collaborative project of the European Forum on Antiphospholipid Antibodies and Juvenile Systemic Lupus Erythematosus Working Group of the Paediatric Rheumatology European Society. Currently, it documents a standardised clinical, laboratory and therapeutic data of 133 children with antiphospholipid antibodies (aPL)-related thrombosis from 14 countries. The priority projects for future research of the Ped-APS Registry include prospective enrolment of new patients with aPL-related thrombosis, assessment of differences between the paediatric and adult APS, evaluation of proinflammatory genotype as a risk factor for APS manifestations in childhood and evaluation of patients with isolated nonthrombotic aPL-related manifestations. © The Author(s), 2009.

Modeling approach based on experimental results for prediction of measurement errors in energy meters

This paper presents a general modeling approach to investigate and to predict measurement errors in active energy meters both induction and electronic types. The measurement error modeling is based on Generalized Additive Model (GAM), Ridge Regression method and experimental results of meter provided by a measurement system. The measurement system provides a database of 26 pairs of test waveforms captured in a real electrical distribution system, with different load characteristics (industrial, commercial, agricultural, and residential), covering different harmonic distortions, and balanced and unbalanced voltage conditions. In order to illustrate the proposed approach, the measurement error models are discussed and several results, which are derived from experimental tests, are presented in the form of three-dimensional graphs, and generalized as error equations. © 2009 IEEE.

Sistema especialista para a monitoração do processo de degradação de medidores tipo indução de energia elétrica ativa

This paper presents a methodology and software for hazard rate analysis of induction type watt-hour meters, considering the main variables related with the degradation process of these meters, for the Elektro Electricity and Services SA. The modeling developed to calculate the watt-hour meters hazard rate was implemented in a tool through a user friendly platform, in Delphi language, enabling not only hazard rate analysis, but also a classification by risk range, localization of installation for the analyzed meters, and, allowing, through an expert system, the sampling of induction type watt-hour meters, based on the model risk developed with artificial intelligence, with the mainly goal of follow and manage the process of degradation, maintenance and replacement of these meters. © 2010 IEEE.

Inversor CS Boost monofásico em aplicações com fontes renováveis

This paper presents a new methodology for the operation and control of a single-phase current-source (CS) Boost Inverter, considering that the conventional current-source inverter (CSI) has a right-half-plane (RHP) zero in its control-to-output transfer function, and this RHP zero causes the known non-minimum-phase effects. In this context, a special design with low boost inductance and a multi-loop control is developed in order to assure stable and very fast dynamics. Furthermore, the Inverter presents output voltage with very low total harmonic distortion (THD), reduced components and high power density. Therefore, this paper presents the inverter operation, the proposed control technique, and main simulation and experimental results in order to demonstrate the feasibility of the proposal. © 2010 IEEE.

Avaliação das principais t́cnicas para obtenção de MPPT de paińis fotovoltaicos

Electrical energy from photovoltaic panels (PV) has became an increasing viable alternative because of the great concern for environmental preservation and the possibility of the reduction of the conventional fuels, and this natural energy source is free, abundant and clean. In addition, Brazil is a privileged country because of the high levels of irradiation throughout its territory all over the year. Thus the exploitation of the energy from PV is one of the best alternatives to overcome the supply electrical energy issues. However, nowadays the energy conversion efficiency is low and the initial costs are high for these energy systems. Therefore, in order to increase the efficiency of these systems the extraction of the maximum power point (MPP) from PV is extremely necessary, and it is done using the maximum power point tracking (MPPT) techniques. The MPP of the PV varies non linearly with the environmental conditions and several MPPT techniques are available in literature, and this paper presents a careful comparison among the most usual techniques, doing meaningful comparisons with respect to the amount of energy extracted, PV voltage ripple, dynamic response and use of sensors, considering that the models are implemented via MatLab/Simulink®. © 2010 IEEE.