106: Synthetic preimplantation factor (sPIF*) promotes neuroprotection by modulating PKA/PKC kinases

OBJECTIVE: Survivors of premature birth suffer from long term disabilities. Synthetic PreImplantation Factor (sPIF*) modulates inflammatory responses and reverses neuroinflammation. Proteinkinase A (PKA) and protein kinase C (PKC) are crucial signaling molecules. PKA up-regulates IL-10 and brain-derived neurotrophic factor (BDNF) expression, which exert neuroprotective effects. Anti-apoptotic phosphorylation of Bad is mediated by PKA. PKC phosphorylates GAP-43, a marker for neuronal plasticity and structural recovery. We explored sPIF protective role in neuronal (N2a) cells and in a rat model of encephalopathy of prematurity. *proprietary. STUDY DESIGN: Cells were subjected to LPS and treated with sPIF or scrambled sPIF. Neonatal rats (postnatal day 3: P3) were subjected to LPS, ligation of carotid artery, and hypoxia (8% O2, 65min; n¼ 30). sPIF (0.75mg/kg twice daily) was injected (P6-13) and brains harvested at P13. sPIF’s potential and mechanisms were evaluated using immunohistochemistry, ELISA, Western Blot, and qRT-PCR. Data were analyzed using two-tailed Student’s t-test. P<0.05 wasconsidered statistically significant. RESULTS: In vitro sPIF increased PKA/PKC activity in time dependent manner (Fig. 1A). sPIF induced higher IL-10, BDNF, and GAP-43 and lower CASP3, BAD, and TNF-a mRNA levels (Fig. 1B,C). sPIF increased pGap-43/Gap-43 and decreased pBad/Bad ratio while decreasing Bad (Fig. 1 D,E). In brain tissue sPIF treatment resulted in rescued neuronal number (NeuN positive cells) and reduced apoptosis (Casp-3 positive cells) with decreased glial (Iba-1 positive cells) activation (Fig. 2A,B). The Iba-1 morphology changed from predominantly amoeboid to ramified state. Additionally sPIF increased IL-10 mRNA levels (Fig. 2C) and pGap-43/Gap-43 ratio (Fig. 2D). CONCLUSION: sPIF modulates PKA/PKC pathways reducing apoptosis and inflammatory responses while increasing neuronal plasticity and survival. The identified PKA/PKC regulatory axis strengthens the potential of sPIF in reducing the burden of prematurity.

Peri-implant bone loss of dental implants with platform-switching design after 5 years of loading: a cross-sectional study

OBJECTIVE The aim of this cross-sectional study was to estimate bone loss of implants with platform-switching design and analyze possible risk indicators after 5 years of loading in a multi-centered private practice network. METHOD AND MATERIALS Peri-implant bone loss was measured radiographically as the distance from the implant shoulder to the mesial and distal alveolar crest, respectively. Risk factor analysis for marginal bone loss included type of implant prosthetic treatment concept and dental status of the opposite arch. RESULTS A total of 316 implants in 98 study patients after 5 years of loading were examined. The overall mean value for radiographic bone loss was 1.02 mm (SD ± 1.25 mm, 95% CI 0.90- 1.14). Correlation analyses indicated a strong association of peri-implant bone loss > 2 mm for removable implant-retained prostheses with an odds ratio of 53.8. CONCLUSION The 5-year-results of the study show clinically acceptable values of mean bone loss after 5 years of loading. Implant-supported removable prostheses seem to be a strong co-factor for extensive bone level changes compared to fixed reconstructions. However, these results have to be considered for evaluation of the included special cohort under private dental office conditions.

Functional studies of insulin-like growth factor binding protein 2 pathway in glioma progression

Comparison of gene expressing profiles between gliomas with different grades revealed frequent overexpression of insulin-like growth factor binding protein 2 (IGFBP2) in glioblastomas (GBM), in which uncontrolled cell proliferation, angiogenesis, invasion and anti-apoptosis are hallmarks. Using the glia-specific gene transfer transgenic mouse and the stable LN229(BP2) GBM cell lines, we found that IGFBP2 by itself cannot transform cells in vitro and in vivo. IGFBP2 had growth inhibitory effects on mouse primary neural progenitors, but overexpression of IGFBP2 had no effect on GBM cells. ^ Although IGFBP2 does not initiate gliomagenesis, using tissue array technology, we observed strong correlation between IGFBP2 overexpression and VEGF up-regulation in human diffuse gliomas. Furthermore, overexpression of IGFBP2 in GBM cells not only enhanced VEGF expression but also increased the malignant potential of U87 MG cells in our angiogenesis xenograft animal model. ^ In parallel to these studies, using established stable SNB19 GBM cells that overexpress IGFBP2, we found that IGFBP2 significantly increased invasion by induction of matrix metalloproteinase-2 (MMP-2) as well as other invasion related genes, providing evidence that IGFBP2 contributes to glioma progression in part by enhancing MMP-2 gene transcription and in turn tumor cell invasion. ^ Finally, we found that primary filial cells infected with an anti-sense IGFBP2 construct have markedly increased sensitivity to γ irradiation and reduced Akt activation. On the other hand, SNB19(BP2) stable lines have consistently increased levels of Akt and NFkB activation, suggesting that one possible mechanism for anti-apoptosic function of IGFBP2 is through the activation of Akt and NFkB. Beside this, what is especially interesting is the finding that Akt protein was cleaved and inactivated during apoptosis by caspases, and IGFBP2 can prevent Akt cleavage, revealing another possible mechanism through it IGFBP2 exhibit strong antiapoptotic effects. Our data showed that IGFBP2 is a specific substrate for caspase-3, raising the possibility that IGFBP2 may inhibit apoptosis by a suicide mechanism. ^ In summary, using cellular, genomics, and molecular approaches, this thesis documented the potential roles of IGFBP2 in glioma progression. Our findings shed light on an important biological aspect of glioma progression and may provide new insights useful for the design of novel mechanism-based therapies for GBM. ^

Association between glycemic index and glycemic load and the risk of incident coronary heart disease among whites and African Americans with and without type 2 diabetes: The Atherosclerosis Risk in Communities study

Several studies have examined the association between high glycemic index (GI) and glycemic load (GL) diets and the risk for coronary heart disease (CHD). However, most of these studies were conducted primarily on white populations. The primary aim of this study was to examine whether high GI and GL diets are associated with increased risk for developing CHD in whites and African Americans, non-diabetics and diabetics, and within stratifications of body mass index (BMI) and hypertension (HTN). Baseline and 17-year follow-up data from ARIC (Atherosclerosis Risk in Communities) study was used. The study population (13,051) consisted of 74% whites, 26% African Americans, 89% non-diabetics, 11% diabetics, 43% male, 57% female aged 44 to 66 years at baseline. Data from the ARIC food frequency questionnaire at baseline were analyzed to provide GI and GL indices for each subject. Increases of 25 and 30 units for GI and GL respectively were used to describe relationships on incident CHD risk. Adjusted hazard ratios for propensity score with 95% confidence intervals (CI) were used to assess associations. During 17 years of follow-up (1987 to 2004), 1,683 cases of CHD was recorded. Glycemic index was associated with 2.12 fold (95% CI: 1.05, 4.30) increased incident CHD risk for all African Americans and GL was associated with 1.14 fold (95% CI: 1.04, 1.25) increased CHD risk for all whites. In addition, GL was also an important CHD risk factor for white non-diabetics (HR=1.59; 95% CI: 1.33, 1.90). Furthermore, within stratum of BMI 23.0 to 29.9 in non-diabetics, GI was associated with an increased hazard ratio of 11.99 (95% CI: 2.31, 62.18) for CHD in African Americans, and GL was associated with 1.23 fold (1.08, 1.39) increased CHD risk in whites. Body mass index modified the effect of GI and GL on CHD risk in all whites and white non-diabetics. For HTN, both systolic blood pressure and diastolic blood pressure modified the effect on GI and GL on CHD risk in all whites and African Americans, white and African American non-diabetics, and white diabetics. Further studies should examine other factors that could influence the effects of GI and GL on CHD risk, including dietary factors, physical activity, and diet-gene interactions. ^

Exploring race/ethnicity as a risk factor for mortality in newborns following congenital heart surgery at a center of excellence

The purpose of this study was to determine if race/ethnicity was a significant risk factor for hospital mortality in children following congenital heart surgery in a contemporary sample of newborns with congenital heart disease. Unlike previous studies that utilized administrative databases, this study utilized clinical data collected at the point of care to examine racial/ethnic outcome differences in the context of the patients' clinical condition and their overall perioperative experience. A retrospective cohort design was used. The study sample consisted of 316 newborns (<31 days of age) who underwent congenital heart surgery between January 2007 through December 2009. A multivariate logistic regression model was used to determine the impact of race/ethnicity, insurance status, presence of a spatial anomaly, prenatal diagnosis, postoperative sepsis, cardiac arrest, respiratory failure, unplanned reoperation, and total length of stay in the intensive care unit on outcomes following congenital heart surgery in newborns. The study findings showed that the strongest predictors of hospital mortality following congenital heart surgery in this cohort were postoperative cardiac arrest, postoperative respiratory failure, having a spatial anomaly, and total ICU LOS. Race/ethnicity and insurance status were not significant risk factors. The institution where this study was conducted is designated as a center of excellence for congenital heart disease. These centers have state-of-the-art facilities, extensive experience in caring for children with congenital heart disease, and superior outcomes. This study suggests that optimal care delivery for newborns requiring congenital heart surgery at a center of excellence portends exceptional outcomes and this benefit is conferred upon the entire patient population despite the race/ethnicity of the patients. From a public health and health services view, this study also contributes to the overall body of knowledge on racial/ethnic disparities in children with congenital heart defects and puts forward the possibility of a relationship between quality of care and racial/ethnic disparities. Further study is required to examine the impact of race/ethnicity on the long-term outcomes of these children as they encounter the disparate components of the health care delivery system. There is also opportunity to study the role of race/ethnicity on the hospital morbidity in these patients considering current expectations for hospital survival are very high, and much of the current focus for quality improvement rests in minimizing the development of patient morbidities.^

Application of virtual certification techniques to vehicle design and track maintenance

Virtual certification partially substitutes by computer simulations the experimental techniques required for rail vehicle certification. In this paper, several works were these techniques were used in the vehicle design and track maintenance processes are presented. Dynamic simulation of multibody systems was used to virtually apply the EN14363 standard to certify the dynamic behaviour of vehicles. The works described are: assessment of a freight bogie design adapted to meter-gauge, assessment of a railway track layout for a subway network, freight bogie design with higher speed and axle load, and processing of the data acquired by a track recording vehicle for track maintenance.

X-parameters based analytical design of non-linear microwave circuits Application to oscillator design

Resumen El diseño clásico de circuitos de microondas se basa fundamentalmente en el uso de los parámetros s, debido a su capacidad para caracterizar de forma exitosa el comportamiento de cualquier circuito lineal. La relación existente entre los parámetros s con los sistemas de medida actuales y con las herramientas de simulación lineal han facilitado su éxito y su uso extensivo tanto en el diseño como en la caracterización de circuitos y subsistemas de microondas. Sin embargo, a pesar de la gran aceptación de los parámetros s en la comunidad de microondas, el principal inconveniente de esta formulación reside en su limitación para predecir el comportamiento de sistemas no lineales reales. En la actualidad, uno de los principales retos de los diseñadores de microondas es el desarrollo de un contexto análogo que permita integrar tanto el modelado no lineal, como los sistemas de medidas de gran señal y los entornos de simulación no lineal, con el objetivo de extender las capacidades de los parámetros s a regímenes de operación en gran señal y por tanto, obtener una infraestructura que permita tanto la caracterización como el diseño de circuitos no lineales de forma fiable y eficiente. De acuerdo a esta filosofía, en los últimos años se han desarrollado diferentes propuestas como los parámetros X, de Agilent Technologies, o el modelo de Cardiff que tratan de proporcionar esta plataforma común en el ámbito de gran señal. Dentro de este contexto, uno de los objetivos de la presente Tesis es el análisis de la viabilidad del uso de los parámetros X en el diseño y simulación de osciladores para transceptores de microondas. Otro aspecto relevante en el análisis y diseño de circuitos lineales de microondas es la disposición de métodos analíticos sencillos, basados en los parámetros s del transistor, que permitan la obtención directa y rápida de las impedancias de carga y fuente necesarias para cumplir las especificaciones de diseño requeridas en cuanto a ganancia, potencia de salida, eficiencia o adaptación de entrada y salida, así como la determinación analítica de parámetros de diseño clave como el factor de estabilidad o los contornos de ganancia de potencia. Por lo tanto, el desarrollo de una formulación de diseño analítico, basada en los parámetros X y similar a la existente en pequeña señal, permitiría su uso en aplicaciones no lineales y supone un nuevo reto que se va a afrontar en este trabajo. Por tanto, el principal objetivo de la presente Tesis consistiría en la elaboración de una metodología analítica basada en el uso de los parámetros X para el diseño de circuitos no lineales que jugaría un papel similar al que juegan los parámetros s en el diseño de circuitos lineales de microondas. Dichos métodos de diseño analíticos permitirían una mejora significativa en los actuales procedimientos de diseño disponibles en gran señal, así como una reducción considerable en el tiempo de diseño, lo que permitiría la obtención de técnicas mucho más eficientes. Abstract In linear world, classical microwave circuit design relies on the s-parameters due to its capability to successfully characterize the behavior of any linear circuit. Thus the direct use of s-parameters in measurement systems and in linear simulation analysis tools, has facilitated its extensive use and success in the design and characterization of microwave circuits and subsystems. Nevertheless, despite the great success of s-parameters in the microwave community, the main drawback of this formulation is its limitation in the behavior prediction of real non-linear systems. Nowadays, the challenge of microwave designers is the development of an analogue framework that allows to integrate non-linear modeling, large-signal measurement hardware and non-linear simulation environment in order to extend s-parameters capabilities to non-linear regimen and thus, provide the infrastructure for non-linear design and test in a reliable and efficient way. Recently, different attempts with the aim to provide this common platform have been introduced, as the Cardiff approach and the Agilent X-parameters. Hence, this Thesis aims to demonstrate the X-parameter capability to provide this non-linear design and test framework in CAD-based oscillator context. Furthermore, the classical analysis and design of linear microwave transistorbased circuits is based on the development of simple analytical approaches, involving the transistor s-parameters, that are able to quickly provide an analytical solution for the input/output transistor loading conditions as well as analytically determine fundamental parameters as the stability factor, the power gain contours or the input/ output match. Hence, the development of similar analytical design tools that are able to extend s-parameters capabilities in small-signal design to non-linear ap- v plications means a new challenge that is going to be faced in the present work. Therefore, the development of an analytical design framework, based on loadindependent X-parameters, constitutes the core of this Thesis. These analytical nonlinear design approaches would enable to significantly improve current large-signal design processes as well as dramatically decrease the required design time and thus, obtain more efficient approaches.

EMI filter design of a three-phase buck-type rectifier for aircraft applications

An EMI filter for a three-phase buck-type medium power pulse-width modulation rectifier is designed. This filter considers differential mode noise and complies with MIL-STD- 461E for the frequency range of 10kHz to 10MHz. In industrial applications, the frequency range of the standard starts at 150kHz and the designer typically uses a switching frequency of 28kHz because the fifth harmonic is out of the range. This approach is not valid for aircraft applications. In order to design the switching frequency in aircraft applications, the power losses in the semiconductors and the weight of the reactive components should be considered. The proposed design is based on a harmonic analysis of the rectifier input current and an analytical study of the input filter. The classical industrial design does not consider the inductive effect in the filter design because the grid frequency is 50/60Hz. However, in the aircraft applications, the grid frequency is 400Hz and the inductance cannot be neglected. The proposed design considers the inductance and the capacitance effect of the filter in order to obtain unitary power factor at full power. In the optimization process, several filters are designed for different switching frequencies of the converter. In addition, designs from single to five stages are considered. The power losses of the converter plus the EMI filter are estimated at these switching frequencies. Considering overall losses and minimal filter volume, the optimal switching frequency is selected

New Considerations in the Input Filter Design of a Three-Phase Buck-Type PWM Rectifier for Aircraft Applications

An EMI filter for a three-phase buck-type medium power pulse-width modulation rectifier is designed. This filter considers differential mode noise and complies with MIL-STD-461E for the frequency range of 10kHz to 10MHz. In industrial applications, the frequency range of the standard starts at 150kHz and the designer typically uses a switching frequency of 28kHz because the fifth harmonic is out of the range. This approach is not valid for aircraft applications. In order to design the switching frequency in aircraft applications, the power losses in the semiconductors and the weight of the reactive components should be considered. The proposed design is based on a harmonic analysis of the rectifier input current and an analytical study of the input filter. The classical industrial design does not consider the inductive effect in the filter design because the grid frequency is 50/60Hz. However, in the aircraft applications, the grid frequency is 400Hz and the inductance cannot be neglected. The proposed design considers the inductance and the capacitance effect of the filter in order to obtain unitary power factor at full power. In the optimization process, several filters are designed for different switching frequencies of the converter. In addition, designs from single to five stages are considered. The power losses of the converter plus the EMI filter are estimated at these switching frequencies. Considering overall losses and minimal filter volume, the optimal switching frequency is selected.

Capacitive load based on IGBTs for on-site characterization of PV arrays

This paper describes the practical design of a portable capacitive load based on insulated gate bipolar transistors (IGBTs), which is used to measure the I–V characteristics of PV arrays with short-circuit currents up to 80 A and open circuit voltages up to 800 V. Such measurement allows on-site characterization of PV arrays under real operating conditions and also provides information for the detection of potential array anomalies, such as broken cells or defective connections. The presented I–V load is easy to reproduce and low-cost, characteristics that are within the reach of small-scale organizations involved in PV electrification projects.

Influencia de la información termográfica infrarroja en el protocolo de prevención de lesiones de un equipo de fútbol profesional español

El fútbol es un deporte en cuya práctica existe una alta incidencia de lesión. Además, en el ámbito profesional las lesiones suponen un duro proceso de recuperación para el futbolista, una reducción del rendimiento deportivo para éste y para el equipo, y unos grandes costes económicos para el club. Dentro de esta problemática, la bibliografía consultada concluye que en las pretemporadas se produce una mayor incidencia de lesión por sobrecarga, es decir, sin contacto; un tipo de lesiones que está a nuestro alcance poder prevenir. Por ello, consideramos importante el conocer y desarrollar métodos, herramientas y principios para obtener programas preventivos efectivos, que reduzcan las elevadas cifras de incidencia de lesión mostradas por la literatura. El presente estudio observa y registra las lesiones, a través del cuestionario F-MARC, de un equipo profesional de fútbol de la Liga Española durante las pretemporadas 2008 (n=24) y 2009 (n=24). Además, durante la pretemporada 2009 se aplicó la termografía infrarroja para adquirir información sobre la asimilación de la carga de entrenamiento por parte de los jugadores, y dicha información se utilizarón para mejorar las tomas de decisiones de protocolos post-ejercicio específicos en prevención de lesiones, los cuales fueron los mismos que se utilizaron previamente en la pretemporada 2008. El estudio tiene un diseño con características pre-post sin grupo de control. Es un estudio longitudinal donde, tras un registro inicial de lesiones en la pretemporada 2008, los sujetos fueron expuestos a la variable independiente, utilización de la termografía infrarroja, en el protocolo de prevención de lesiones durante la pretemporada 2009. Los resultados de este trabajo muestran una reducción significativa de hasta el 60% en la frecuencia de lesión durante la pretemporada 2009, y un descenso de la incidencia de lesión total que pasa de 8,3 lesiones por cada 1000 horas de exposición en 2008 a 3,4 en 2009. Con ello, la probabilidad de lesión se redujo considerablemente pasando de un 85% de los jugadores lesionados en 2008 a un 26% en 2009; además, las lesiones de carácter muscular descendieron en 2009 un 70% con respecto al 2008, y los días de baja que causaron todas las lesiones pasó a reducirse un 91,8% en la pretemporada 2009. Por otro lado, el perfil térmico de los jugadores en función de su lateralidad y dominancia, guarda una gran similitud en sus temperaturas, tanto medias como máximas, con temperaturas más elevadas en la zona corporal lumbar y poplítea, y con temperaturas más bajas en tobillos y rodillas. Todas las zonas corporales estudiadas, exceptuando el tobillo (p<0,05), no presentan diferencias significativas entre ambos hemicuerpos, estableciendo un promedio de diferencia entre ambos lados de 0,06±0,16 ºC. Teniendo en cuenta estos resultados, consideramos el límite superior de normalidad de asimetría térmica bilateral en 0,3ºC para todas las zonas corporales estudiadas del miembro inferior exceptuando los tobillos. El parámetro ambiental que más relación tiene con la temperatura registrada por la cámara termográfica es la temperatura de la sala con un coeficiente de correlación cercano a r=1,00, seguido de la presión atmosférica con un coeficiente de correlación cercano r=0,50, y, por último, la humedad que no guarda ningún tipo de relación con la temperatura registrada en cada zona corporal en el rango de valores considerados en el estudio. Por otro lado, los resultados del ANOVA de un factor nos indican que existen diferencias de medias entre los tres grupos formados de temperatura ambiente de sala (1º=18º-21ºC, 2º=22º-24ºC y 3º=25º-31ºC). Además, los resultados de la prueba HSD de Tukey nos indican que existen diferencias entre cada uno de los grupos en todas las zonas corporales estudiadas exceptuando los tobillos. Por último, se propone la ecuación; TC-estándar = TC-real – [0,184 * (TS – 21ºC)] para predecir la influencia de la temperatura ambiente sobre la temperatura registrada por la cámara termográfica. Para concluir, tras los resultados obtenidos, podemos afirmar que la aplicación de un protocolo post-ejercicio de prevención de lesiones basado en la información adquirida a través de valoraciones con termografía infrarroja reduce la incidencia de lesión en el grupo de futbolistas profesionales estudiado. Tenemos que ser conscientes que nos encontramos ante un estudio de campo, donde existen muchos factores que han podido influenciar en los resultados y que son difíciles de controlar. Por lo tanto, debemos ser cautos y concluir que la información adquirida de las evaluaciones termográficas ha sido uno de los aspectos que ayudó a la reducción significativa de la incidencia de lesión en la pretemporada 2009 en el equipo de fútbol profesional español de este estudio, pero que seguramente hayan podido existir otros factores que también hayan favorecido este hecho. ABSTRACT Soccer is a sport with a high incidence of injury. Moreover, in professional soccer injuries lead to a tough recovery process for the players, a reduction athletic performance for them and for their teams, and large economic costs for the club. In this issue, the literature concludes that in the preseason a greater incidence of overuse injury occurs (ie, without contact), and this is a type of injury that we can prevent. Therefore, we consider that it is important to know and develop methods, tools and principles to obtain effective preventive programs that reduce the high injury incidence figures shown in the literature. This study observed and recorded injuries, through the questionnaire F-MARC, from a professional soccer team in the Spanish league during the preseason 2008 (n = 24) and 2009 (n = 24). Moreover, during the 2009 preseason infrared thermography was applied to acquire information about the assimilation of the training load by the players, and this information was used to improve the decision making in the specific post-exercise injury prevention protocols, which were the same used in the previous season 2008. The study had a pre-post design without control group. Is a longitudinal study where, after an initial registration of injuries in the 2008 preseason, subjects were exposed to the independent variable, using infrared thermography, included in the protocol for injury prevention during the 2009 preseason. The results of this study show a significant reduction of up to 60% in the frequency of injury during the 2009 preseason, and a decrease in total injury incidence passing from 8.3 injuries per 1000 hours of exposure in 2008 to 3.4 in 2008. With this, the likelihood of injury decreased significantly from 85% of the players injuried in 2008 to 26% in 2009, also muscle injuries in 2009 fell 70% compared to 2008, and sick leave days that caused by all the injuries happened were reduced a 91.8% in the 2009 preseason. On the other hand, the thermal profile of the players according to their laterality and dominance, is quiet similar in their temperatures, both average and maximum values, with an estimated average of the highest temperatures in the lower back and popliteal areas in the back areas, and lower temperatures in the ankles and knees. All body areas studied, except for the ankle (p <0.05), had no significant differences between both sides of the body, establishing an average difference between both sides of 0.06 ± 0.16 °C. Given these results, we consider the upper limit of normal bilateral thermal asymmetry 0.3 °C for all body areas studied in the lower limb except for ankles. The environmental parameter higher related with temperature recorded by the camera is the temperature of the room with a correlation coefficient close to r = 1.00, followed by atmospheric pressure with a correlation coefficient near r = 0.50, and finally, the humidity that, in the range of values considered in the study, it is not related with temperature in each body area. On the other hand, the results of one-way ANOVA indicate that there are differences between the three temperature of the room groups (1 ° = 18-21 °C, 2 º = 22-24 ºC and 3 º = 25-31 ºC). Moreover, the results of the Tukey HSD test indicate that there are differences between each of the groups for all body areas studied except the ankles. Finally, we propose the equation TC-standard = TC-real – [0,184 * (TS – 21ºC)] to predict the influence of temperature on the temperature recorded by the thermographic camera. In conclusion, we can say from our results that the implementation of a post-exercise injury prevention protocol based on information from assessments with infrared thermography reduces the incidence of injury in professional soccer players. We must be aware that we are facing a field study, where there are many factors that could influence the results and they are difficult to control. Therefore, we must be cautious and conclude that the information acquired from the thermographic evaluation has been one of the aspects that helped to significantly reduce the incidence of injury in the preseason 2009 in the Spanish professional football team, but probably they could exist other factors with a positive effect on the reduction of the injury rates.

Novel Inductor‐less Conversion Strategy Based on Multiphase Transformer‐Coupled Converters: Analysis, Design and Applications

There are many the requirements that modern power converters should fulfill. Most of the applications where these converters are used, demand smaller converters with high efficiency, improved power density and a fast dynamic response. For instance, loads like microprocessors demand aggressive current steps with very high slew rates (100A/mus and higher); besides, during these load steps, the supply voltage of the microprocessor should be kept within tight limits in order to ensure its correct performance. The accomplishment of these requirements is not an easy task; complex solutions like advanced topologies - such as multiphase converters- as well as advanced control strategies are often needed. Besides, it is also necessary to operate the converter at high switching frequencies and to use capacitors with high capacitance and low ESR. Improving the dynamic response of power converters does not rely only on the control strategy but also the power topology should be suited to enable a fast dynamic response. Moreover, in later years, a fast dynamic response does not only mean accomplishing fast load steps but output voltage steps are gaining importance as well. At least, two applications that require fast voltage changes can be named: Low power microprocessors. In these devices, the voltage supply is changed according to the workload and the operating frequency of the microprocessor is changed at the same time. An important reduction in voltage dependent losses can be achieved with such changes. This technique is known as Dynamic Voltage Scaling (DVS). Another application where important energy savings can be achieved by means of changing the supply voltage are Radio Frequency Power Amplifiers. For example, RF architectures based on ‘Envelope Tracking’ and ‘Envelope Elimination and Restoration’ techniques can take advantage of voltage supply modulation and accomplish important energy savings in the power amplifier. However, in order to achieve these efficiency improvements, a power converter with high efficiency and high enough bandwidth (hundreds of kHz or even tens of MHz) is necessary in order to ensure an adequate supply voltage. The main objective of this Thesis is to improve the dynamic response of DC-DC converters from the point of view of the power topology. And the term dynamic response refers both to the load steps and the voltage steps; it is also interesting to modulate the output voltage of the converter with a specific bandwidth. In order to accomplish this, the question of what is it that limits the dynamic response of power converters should be answered. Analyzing this question leads to the conclusion that the dynamic response is limited by the power topology and specifically, by the filter inductance of the converter which is found in series between the input and the output of the converter. The series inductance is the one that determines the gain of the converter and provides the regulation capability. Although the energy stored in the filter inductance enables the regulation and the capability of filtering the output voltage, it imposes a limitation which is the concern of this Thesis. The series inductance stores energy and prevents the current from changing in a fast way, limiting the slew rate of the current through this inductor. Different solutions are proposed in the literature in order to reduce the limit imposed by the filter inductor. Many publications proposing new topologies and improvements to known topologies can be found in the literature. Also, complex control strategies are proposed with the objective of improving the dynamic response in power converters. In the proposed topologies, the energy stored in the series inductor is reduced; examples of these topologies are Multiphase converters, Buck converter operating at very high frequency or adding a low impedance path in parallel with the series inductance. Control techniques proposed in the literature, focus on adjusting the output voltage as fast as allowed by the power stage; examples of these control techniques are: hysteresis control, V 2 control, and minimum time control. In some of the proposed topologies, a reduction in the value of the series inductance is achieved and with this, the energy stored in this magnetic element is reduced; less stored energy means a faster dynamic response. However, in some cases (as in the high frequency Buck converter), the dynamic response is improved at the cost of worsening the efficiency. In this Thesis, a drastic solution is proposed: to completely eliminate the series inductance of the converter. This is a more radical solution when compared to those proposed in the literature. If the series inductance is eliminated, the regulation capability of the converter is limited which can make it difficult to use the topology in one-converter solutions; however, this topology is suitable for power architectures where the energy conversion is done by more than one converter. When the series inductor is eliminated from the converter, the current slew rate is no longer limited and it can be said that the dynamic response of the converter is independent from the switching frequency. This is the main advantage of eliminating the series inductor. The main objective, is to propose an energy conversion strategy that is done without series inductance. Without series inductance, no energy is stored between the input and the output of the converter and the dynamic response would be instantaneous if all the devices were ideal. If the energy transfer from the input to the output of the converter is done instantaneously when a load step occurs, conceptually it would not be necessary to store energy at the output of the converter (no output capacitor COUT would be needed) and if the input source is ideal, the input capacitor CIN would not be necessary. This last feature (no CIN with ideal VIN) is common to all power converters. However, when the concept is actually implemented, parasitic inductances such as leakage inductance of the transformer and the parasitic inductance of the PCB, cannot be avoided because they are inherent to the implementation of the converter. These parasitic elements do not affect significantly to the proposed concept. In this Thesis, it is proposed to operate the converter without series inductance in order to improve the dynamic response of the converter; however, on the other side, the continuous regulation capability of the converter is lost. It is said continuous because, as it will be explained throughout the Thesis, it is indeed possible to achieve discrete regulation; a converter without filter inductance and without energy stored in the magnetic element, is capable to achieve a limited number of output voltages. The changes between these output voltage levels are achieved in a fast way. The proposed energy conversion strategy is implemented by means of a multiphase converter where the coupling of the phases is done by discrete two-winding transformers instead of coupledinductors since transformers are, ideally, no energy storing elements. This idea is the main contribution of this Thesis. The feasibility of this energy conversion strategy is first analyzed and then verified by simulation and by the implementation of experimental prototypes. Once the strategy is proved valid, different options to implement the magnetic structure are analyzed. Three different discrete transformer arrangements are studied and implemented. A converter based on this energy conversion strategy would be designed with a different approach than the one used to design classic converters since an additional design degree of freedom is available. The switching frequency can be chosen according to the design specifications without penalizing the dynamic response or the efficiency. Low operating frequencies can be chosen in order to favor the efficiency; on the other hand, high operating frequencies (MHz) can be chosen in order to favor the size of the converter. For this reason, a particular design procedure is proposed for the ‘inductorless’ conversion strategy. Finally, applications where the features of the proposed conversion strategy (high efficiency with fast dynamic response) are advantageus, are proposed. For example, in two-stage power architectures where a high efficiency converter is needed as the first stage and there is a second stage that provides the fine regulation. Another example are RF power amplifiers where the voltage is modulated following an envelope reference in order to save power; in this application, a high efficiency converter, capable of achieving fast voltage steps is required. The main contributions of this Thesis are the following: The proposal of a conversion strategy that is done, ideally, without storing energy in the magnetic element. The validation and the implementation of the proposed energy conversion strategy. The study of different magnetic structures based on discrete transformers for the implementation of the proposed energy conversion strategy. To elaborate and validate a design procedure. To identify and validate applications for the proposed energy conversion strategy. It is important to remark that this work is done in collaboration with Intel. The particular features of the proposed conversion strategy enable the possibility of solving the problems related to microprocessor powering in a different way. For example, the high efficiency achieved with the proposed conversion strategy enables it as a good candidate to be used for power conditioning, as a first stage in a two-stage power architecture for powering microprocessors.

The Dynamics of High-Speed Railway Bridges: A Review of Design Issues and New Research for Lateral Dynamics

The dynamic effects of high-speed trains on viaducts are important issues for the design of the structures, as well as for the consideration of safe running conditions for the trains. In this work we start by reviewing the relevance of some basic design aspects. The significance of impact factor envelopes for moving loads is considered first. Resonance which may be achieved for high-speed trains requires dynamic analysis, for which some key aspects are discussed. The relevance of performing a longitudinal distribution of axle loads, the number of modes taken in analysis, and the consideration of vehicle-structure interaction are discussed with representative examples. The lateral dynamic effects of running trains on bridges is of importance for laterally compliant viaducts, such as some very tall structures erected in new high-speed lines. The relevance of this study is mainly for the safety of the traffic, considering both internal actions such as the hunting motion as well as external actions such as wind or earthquakes [1]. These studies require three-dimensional dynamic coupled vehicle-bridge models, and consideration of wheel to rail contact, a phenomenon which is complex and costly to model in detail. We describe here a fully nonlinear coupled model, described in absolute coordinates and incorporated into a commercial finite element framework [2]. The wheel-rail contact has been considered using a FastSim algorithm which provides a compromise between accuracy and computational cost, and captures the main nonlinear response of the contact interface. Two applications are presented, firstly to a vehicle subject to a strong wind gust traversing a bridge, showing the relevance of the nonlinear wheel-rail contact model as well as the dynamic interaction between bridge and vehicle. The second application is to a real HS viaduct with a long continuous deck and tall piers and high lateral compliance [3]. The results show the safety of the traffic as well as the importance of considering features such as track alignment irregularities.

Dynamic response of hydro power plants to load variations for providing secondary regulation reserves considering elastic water column effects

In this paper, the dynamic response of a hydro power plant for providing secondary regulation reserve is studied in detail. S pecial emphasis is given to the elastic water column effects both in the penstock and the tailrace tunnel. For this purpose, a nonline ar model based on the analogy between mass and momentum conservation equations of a water conduit and those of wave propagation in transmission lines is used. The influence of the plant configuration and design parameters on the fulfilment of the Spanish Electrical System Operator requirem ents is analysed.

Efficient design and optimization of bio-photonic sensing cells (BICELLs) for label free biosensing

In previous works we demonstrated the benefits of using micro–nano patterning materials to be used as bio-photonic sensing cells (BICELLs), referred as micro–nano photonic structures having immobilized bioreceptors on its surface with the capability of recognizing the molecular binding by optical transduction. Gestrinone/anti-gestrinone and BSA/anti-BSA pairs were proven under different optical configurations to experimentally validate the biosensing capability of these bio-sensitive photonic architectures. Moreover, Three-Dimensional Finite Difference Time Domain (FDTD) models were employed for simulating the optical response of these structures. For this article, we have developed an effective analytical simulation methodology capable of simulating complex biophotonic sensing architectures. This simulation method has been tested and compared with previous experimental results and FDTD models. Moreover, this effective simulation methodology can be used for efficiently design and optimize any structure as BICELL. In particular for this article, six different BICELL's types have been optimized. To carry out this optimization we have considered three figures of merit: optical sensitivity, Q-factor and signal amplitude. The final objective of this paper is not only validating a suitable and efficient optical simulation methodology but also demonstrating the capability of this method for analyzing the performance of a given number of BICELLs for label-free biosensing.