Epitaxial growth of molecular crystals on van der Waals substrates for high-performance organic electronics

Epitaxial van der Waals (vdW) heterostructures of organic and layered materials are demonstrated to create high-performance organic electronic devices. High-quality rubrene films with large single-crystalline domains are grown on h-BN dielectric layers via vdW epitaxy. In addition, high carrier mobility comparable to free-standing single-crystal counterparts is achieved by forming interfacial electrical contacts with graphene electrodes.

A Simple Model Describes Development of Early Peaks in Oomycete Zoospore Inoculum Detected in Southern UK Outdoors Horticultural Reservoirs

The numbers of water-borne oomycete propagules in outdoor reservoirs used in horticultural nurseries within the UK are investigated in this study. Water samples were recovered from 11 different horticultural nurseries in the southern UK during Jan-May in two ‘cool’ years (2010.and 2013; winter temperatures 2.0 and 0.4oC below UK Met Office 30 year winter average respectively) and two ‘warm’ years (2008 and 2012; winter temperatures 1.2 and 0.9oC above UK Met Office 30 year winter average respectively). Samples were analysed for total number of oomycete colony forming units (CFU), predominantly members of the families Saprolegniaceae and Pythiaceae, and these were combined to give monthly mean counts. The numbers of CFU were investigated with respect to prevailing climate in the region: mean monthly air temperatures calculated by using daily observations from the nearest climatological station. The investigations show that the number of CFU during spring can be explained by a linear first-order equation and a statistically significant r2 value of 0.66 with the simple relationship: [CFU] = a(T-Tb )-b, where a is the rate of inoculum development with temperature T, and b is the baseload population at temperatures below Tb. Despite the majority of oomycete CFU detected being non-phytopathogenic members of the Saprolegniaceae, total oomycete CFU counts are still of considerable value as indicators of irrigation water treatment efficacy and cleanliness of storage tanks. The presence/absence of Pythium spp. was also determined for all samples tested, and Pythium CFU were found to be present in the majority, the exceptions all being particularly cold months (January and February 2010 and January 2008). A simple scenario study (+2 deg C) suggests that abundance of water-borne oomycetes during spring could be affected by increased temperatures due to climate change.

Evaluation and FMEA of Fabrication Techniques for Metallic Grating Couplers on Polymer Substrates with Low Glass Transition Temperatures

The main task is to analyze the state of the art of grating couplers production and low-cost polymer substrates. Then to provide a recommendation of a new or adapted process for the production of metallic gratings on polymer sheets, based on a Failure Mode and Effect Analysis (FMEA). In order to achieve that, this thesis is divided into four chapters. After the first introductory chapter, the second section provides details about the state-of-the-art in optical technology platforms with focus on polymers and their main features for the aimed application, such as flexibility, low cost and roll to roll compatibility. It defines then the diffraction gratings and their specifications and closes with the explanation of adhesion mechanisms of inorganic materials on polymer substrates. The third chapter discusses processing of grating couplers. It introduces the basic fabrication methods and details a selection of current fabrication schemes found in literature with an assessment of their potential use for the desired application. The last chapter is a FMEA analysis of the retained fabrication process, called Flip and Fuse, in order to check its capability to realize the grating structure.

Influence of substrates composition on immunomodulation by MSCs

Mesenchymal stem cells (MSCs) are non-hematopoietic multipotent stem cells capable to self-renew and differentiate along different cell lineages. MSCs can be found in adult tissues and extra embryonic tissues like the umbilical cord matrix/Wharton’s Jelly (WJ). The latter constitute a good source of MSCs, being more naïve and having a higher proliferative potential than MSCs from adult tissues like the bone marrow, turning them more appealing for clinical use. It is clear that MSCs modulate both innate and adaptive immune responses and its immunodulatory effects are wide, extending to T cells and dendritic cells, being therapeutically useful for treatment of immune system disorders. Mechanotransduction is by definition the mechanism by which cells transform mechanical signals translating that information into biochemical and morphological changes. Here, we hypothesize that by culturing WJ-MSCs on distinct substrates with different stiffness and biochemical composition, may influence the immunomodulatory capacity of the cells. Here, we showed that WJ-MSCs cultured on distinct PDMS substrates presented different secretory profiles from cells cultured on regular tissue culture polystyrene plates (TCP), showing higher secretion of several cytokines analysed. Moreover, it was also shown that WJ-MSCs cultured on PDMS substrates seems to possess higher immunomodulatory capabilities and to differentially regulate the functional compartments of T cells when compared to MSCs maintained on TCP. Taken together, our results suggest that elements of mechanotransduction seem to be influencing the immunomodulatory ability of MSCs, as well as their secretory profile. Thus, future strategies will be further explored to better understand these observation and to envisage new in vitro culture conditions for MSCs aiming at distinct therapeutic approaches, namely for immune-mediated disorders.

Relations between zero-inflated variables in trials with horticultural crops

Certain characteristics of some vegetable crops allow multiple harvests during the production cycle; however, to our knowledge, no study has described the behavior of fruit production with progression of the production cycle in vegetable crops with multiple harvests that present data overdispersion. We aimed to characterize the data overdispersion of zero-inflated variables and identify the behavior of these variables during the production cycle of several vegetable crops with multiple harvests. Data from 11 uniformity trials were used without applying treatments; these comprise the database from the Experimental Plants Group at the Federal University of Santa Maria, Brazil. The trials were conducted using four horticultural species grown during different cultivation seasons, cultivation environments, and experimental structures. Although at each harvest, a larger number of basic units with harvest fruit was observed than units without harvest fruit, the basic unit percentage without fruit was high, generating an overdispersion within each individual harvest. The variability within each harvest was high and increased with the evolution of the production cycle of Capsicum annuum, Solanum lycopersicum var. cerasiforme, Phaseolus vulgaris, and Cucurbita pepo species. However, the correlation coefficient between the mean weight and number of harvest fruits tended to remain constant during the crop production cycle. These behaviors show that harvest management should be done individually, at each harvest, such that data overdispersion is reduced.

Refrigeration needs for sustainable preservation of horticultural products

Fresh horticultural products are highly perishable and need refrigeration for further preservation. Refrigeration needs energy consumption with consequent economical cost and damage for the environment. The objective of the present work was to use efficiently the refrigeration according to the product needs and time for consumption. Salicornia ramosissima and Sarcocornia perennis fresh branch tips, which are used for fresh salads, were stored at 1, 4 and 9 °C for up to 21 days. In both species, fresh tips were of good consumer acceptability for up to 14 days at 9°C. At 1 and 4 °C fresh tips could be stored in good conditions up to 21 days. For efficient use of energy in refrigeration of fresh salicornia and sarcocornia we conclude that if it is to put those products in the market earlier we can use the higher temperature for storage saving energy. Only for further storage we shall use the lower temperatures.

Compact discs as versatile cost-effective substrates for releasable nanopatterned aluminium films

We demonstrate that standard polycarbonate compact disk surfaces can provide unique adhesion to Al films that is both strong enough to permit Al film nanopatterning and weak enough to allow easy nanopatterned Al film detachment using Scotch tape. Transferred Al nanohole arrays on Scotch tape exhibit excellent optical and plasmonic performance.

Refrigeration needs for sustainable preservation of horticultural products

Fresh horticultural products are highly perishable and need refrigeration for further preservation. Refrigeration needs energy consumption with consequent economical cost and damage for the environment. The objective of the present work was to use efficiently the refrigeration according to the product needs and time for consumption. Salicornia ramosissima and Sarcocornia perennis fresh branch tips, which are used for fresh salads, were stored at 1, 4 and 9 °C for up to 21 days. In both species, fresh tips were of good consumer acceptability for up to 14 days at 9°C. At 1 and 4 °C fresh tips could be stored in good conditions up to 21 days. For efficient use of energy in refrigeration of fresh salicornia and sarcocornia we conclude that if it is to put those products in the market earlier we can use the higher temperature for storage saving energy. Only for further storage we shall use the lower temperatures.

RNA interference technology as a potential control method for fruit and horticultural crops pathogens Botrytis cinerea and Plasmopara viticola

Chapter 1, a general introduction on Botrytis cinerea and its threat to crop production is presented. What Botrytis looks like, its life cycle, why it is a threat to agricultural production, its worldwide pest status, and its current state of management is further elaborated on. Chapter 2, a general introduction on Plasmopara viticola, its threat to grape production and management strategies presented. Chapter 3, titled " RNA Interference Strategies for Future Management of Plant Pathogenic Fungi: Prospects and Challenges ", presents the rapid improvement and extensive implementation of RNA interference (RNAi) technology for the management of fungal pathogens. In this chapter, we describe the application of exogenous RNAi involved in plant pathogenic fungi and discuss dsRNA production, formulation, and RNAi delivery methods. Chapter 4, titled " Exogenous dsRNAs against chitin synthase and glucan synthase genes suppress the growth of the pathogenic fungus Botrytis cinerea " addresses two important questions: Is RNAi technology functional for B. cinerea control ? And which target genes can be exploited for RNAi-based B.cinerea disease control ? Upon target genes selections, an exogenous RNAi protocol was set up and we could effectively deliver a known dose of bacterially produced double stranded RNA (dsRNA) to induce RNAi in B. cinerea. Chapter 5, titled " Double-Stranded RNA Targeting Dicer-Like Genes Compromises the Pathogenicity of Plasmopara viticola on Grapevine “, which deals mainly on RNAi induction against Plasmopara viticola. This chapter addresses two main questions: Is RNAi technology functional in contrasting Plasmopara viticola? And which target genes can be exploited for RNAi-based disease control in Plasmopara viticola?. In the last Chapter (Chapter 6) titled “General discussions and perspectives for future research”, the major research findings from this thesis are discussed together with perspectives for future research.

Molecular And Biochemical Characterization Of Caffeine Synthase And Purine Alkaloid Concentration In Guarana Fruit.

Guarana seeds have the highest caffeine concentration among plants accumulating purine alkaloids, but in contrast with coffee and tea, practically nothing is known about caffeine metabolism in this Amazonian plant. In this study, the levels of purine alkaloids in tissues of five guarana cultivars were determined. Theobromine was the main alkaloid that accumulated in leaves, stems, inflorescences and pericarps of fruit, while caffeine accumulated in the seeds and reached levels from 3.3% to 5.8%. In all tissues analysed, the alkaloid concentration, whether theobromine or caffeine, was higher in young/immature tissues, then decreasing with plant development/maturation. Caffeine synthase activity was highest in seeds of immature fruit. A nucleotide sequence (PcCS) was assembled with sequences retrieved from the EST database REALGENE using sequences of caffeine synthase from coffee and tea, whose expression was also highest in seeds from immature fruit. The PcCS has 1083bp and the protein sequence has greater similarity and identity with the caffeine synthase from cocoa (BTS1) and tea (TCS1). A recombinant PcCS allowed functional characterization of the enzyme as a bifunctional CS, able to catalyse the methylation of 7-methylxanthine to theobromine (3,7-dimethylxanthine), and theobromine to caffeine (1,3,7-trimethylxanthine), respectively. Among several substrates tested, PcCS showed higher affinity for theobromine, differing from all other caffeine synthases described so far, which have higher affinity for paraxanthine. When compared to previous knowledge on the protein structure of coffee caffeine synthase, the unique substrate affinity of PcCS is probably explained by the amino acid residues found in the active site of the predicted protein.

Influence Of Substrate Steps On The Catalytic Properties Of Pt Layers: The Ethanol Electrooxidation Reaction.

The ethanol oxidation reaction (EOR) is investigated on Pt/Au(hkl) electrodes. The Au(hkl) single crystals used belong to the [n(111)x(110)] family of planes. Pt is deposited following the galvanic exchange of a previously deposited Cu monolayer using a Pt(2+) solution. Deposition is not epitaxial and the defects on the underlying Au(hkl) substrates are partially transferred to the Pt films. Moreover, an additional (100)-step-like defect is formed, probably as a result of the strain resulting from the Pt and Au lattice mismatch. Regarding the EOR, both vicinal Pt/Au(hkl) surfaces exhibit a behavior that differs from that expected for stepped Pt; for instance, the smaller the step density on the underlying Au substrate, the greater the ability to break the CC bond in the ethanol molecule, as determined by in situ Fourier transform infrared spectroscopy measurements. Also, we found that the acetic acid production is favored as the terrace width decreases, thus reflecting the inefficiency of the surface array to cleave the ethanol molecule.

Microtensile Bond Strength Of Methacrylate And Silorane Resins To Enamel And Dentin.

The aim of this study was to evaluate the microtensile bond strength (µTBS) of two substrates (enamel and dentin) considering two study factors: type of composite resin [methacrylate-based (Filtek Supreme) or silorane-based (Filtek LS)] and aging time (24 h or 3 months). Twenty human molars were selected and divided into 2 groups (n=10) considering two dental substrates, enamel or dentin. The enamel and dentin of each tooth was divided into two halves separated by a glass plate. Each tooth was restored using both tested composite resins following the manufacturer's instructions. The samples were sectioned, producing 4 sticks for each composite resin. Half of them were tested after 24 h and half after 3 months. µTBS testing was carried out at 0.05 mm/s. Data were analyzed by three-way ANOVA and Tukey's HSD tests at α=0.05. Significant differences between composite resins and substrates were found (p<0.05), but no statistically significant difference was found for aging time and interactions among study factors. The methacrylate-based resin showed higher µTBS than the silorane-based resin. The µTBS for enamel was significantly higher than for dentin, irrespective of the composite resin and storage time. Three months of storage was not sufficient time to cause degradation of the bonding interaction of either of the composite resins to enamel and dentin.

Effects Of Partial Inhibition Of Respiratory Complex I On H2o 2 Production By Isolated Brain Mitochondria In Different Respiratory States.

The aim of this work was to characterize the effects of partial inhibition of respiratory complex I by rotenone on H2O2 production by isolated rat brain mitochondria in different respiratory states. Flow cytometric analysis of membrane potential in isolated mitochondria indicated that rotenone leads to uniform respiratory inhibition when added to a suspension of mitochondria. When mitochondria were incubated in the presence of a low concentration of rotenone (10 nm) and NADH-linked substrates, oxygen consumption was reduced from 45.9 ± 1.0 to 26.4 ± 2.6 nmol O2 mg(-1) min(-1) and from 7.8 ± 0.3 to 6.3 ± 0.3 nmol O2 mg(-1) min(-1) in respiratory states 3 (ADP-stimulated respiration) and 4 (resting respiration), respectively. Under these conditions, mitochondrial H2O2 production was stimulated from 12.2 ± 1.1 to 21.0 ± 1.2 pmol H2O2 mg(-1) min(-1) and 56.5 ± 4.7 to 95.0 ± 11.1 pmol H2O2 mg(-1) min(-1) in respiratory states 3 and 4, respectively. Similar results were observed when comparing mitochondrial preparations enriched with synaptic or nonsynaptic mitochondria or when 1-methyl-4-phenylpyridinium ion (MPP(+)) was used as a respiratory complex I inhibitor. Rotenone-stimulated H2O2 production in respiratory states 3 and 4 was associated with a high reduction state of endogenous nicotinamide nucleotides. In succinate-supported mitochondrial respiration, where most of the mitochondrial H2O2 production relies on electron backflow from complex II to complex I, low rotenone concentrations inhibited H2O2 production. Rotenone had no effect on mitochondrial elimination of micromolar concentrations of H2O2. The present results support the conclusion that partial complex I inhibition may result in mitochondrial energy crisis and oxidative stress, the former being predominant under oxidative phosphorylation and the latter under resting respiration conditions.

Comparative In vitro Mechanical Evaluation Of Techniques Using A 2.0 mm Locking Fixation System For Simulated Fractures Of The Mandibular Body.

To perform a comparative evaluation of the mechanical resistance of simulated fractures of the mandibular body which were repaired using different fixation techniques with two different brands of 2.0 mm locking fixation systems. Four aluminum hemimandibles with linear sectioning simulating a mandibular body fracture were used as the substrates and were fixed using the two techniques and two different brands of fixation plate. These were divided into four groups: groups I and II were fixed with one four-hole plate, with four 6 mm screws in the tension zone and one four-hole plate, with four 10 mm screws in the compression zone; and groups III and IV were fixed with one four-hole plate with four 6 mm screws in the neutral zone. Fixation plates manufactured by Tóride were used for groups I and III, and by Traumec for groups II and IV. The hemimandibles were submitted to vertical, linear load testing in an Instron 4411 servohydraulic mechanical testing unit, and the load/displacement (3 mm, 5 mm and 7 mm) and the peak loads were measured. Means and standard deviations were evaluated applying variance analysis with a significance level of 5%. The only significant difference between the brands was seen at displacements of 7 mm. Comparing the techniques, groups I and II showed higher mechanical strength than groups III and IV, as expected. For the treatment of mandibular linear body fracture, two locking plates, one in the tension zone and another in the compression zone, have a greater mechanical strength than a single locking plate in the neutral zone.