Degradação de efluentes da indústria têxtil pelo processo eletrolítico e avaliação ecotoxicológica em diferentes níveis tróficos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Práticas de gestão da melhoria contínua e aprendizado e suas contribuições para a capacidade de inovação na indústria de construção naval do Brasil

After years of stagnation, the naval construction industry in Brazil has been experiencing a period of recovery caused by investments in the oil and gas sector and the implementation of governmental programs that aimed to regenerate it. However, efforts in learning and innovations are needed in order to reinsert the country in this activity and achieve international levels of competitiveness. Based on literature about learning processes and continuous improvement practices and their impact in the innovative and productive processes, this paper aims to identify the main tendencies, mechanisms and procedures to improve the construction and management processes in the Brazilian naval construction industry. The methodology used for the data analysis classifies obtained information from magazines and annals of congresses of the sector, according to the established analysis categories (phenomena). Such categories study information related to the productive and technological processes of the industry, the main internal and external relations of the industrial park, the management of resources and processes, policies, investments, etc. The data was collected in the period 2004-2010, and more than 500 registers that show a dominance of the investment phenomenon, especially in the increase of productive capacity, were catalogued. In addition to this, there is evidence of modernization in the manufacturing plan and the equipment, diverse forms of cooperation, implementation of human resources management practices and engineering or processes and products. Hence, a process of catching up governs and is guided by modernization and increase training in this industry.

Desenvolvimento de métodos analíticos de desreplicação por RMN, EM e análise multivariada do perfil metabolômico de espécies de Solanaceae com potencial biológico

Pós-graduação em Química - IQ

Adsorção de cádmio e chumbo em solução aquosa por lama vermelha natural e com diferentes ativações

Pós-graduação em Engenharia Civil e Ambiental - FEB

Isolamento de leveduras em indústria de refrigerante e avaliação da susceptibilidade à ação antimicrobiana dos agentes sanificantes de uso industrial

Pós-graduação em Microbiologia - IBILCE

Características do aço API X70 utilizado em tubos de transporte de petróleo e gás

Having in mind that petroleum's history presents a huge growth, the exploration and production areas have been receiving lots of investments, in order to attend the increasing demand for gas and petroleum. Looking through that scenario, new technologies have been evolving in favor of discovering new natural petroleum deposits and act with effectiveness in truly deep waters without giving up the worldwide best operational security practices. The use of rigid pipes in marine installations have been rising quickly and, thanks to this reality, the many storage and pipe launching forms became study objects and are getting improved. The analysis of steel API X70 characteristics, proving that they are suitable for use in pipes developed to transport gas and petroleum is the theme of this presentation. A tensile test was conducted to determine the base metal's mechanical properties, draining's tension, traction's resistance, elasticity's modulus and maximum tension. An aspect that is concerning too is the metallographic analysis, in order to determine the studied iron's microstructure. Results of analyzes showed that the steel has high resistance, with good capacity for deformation and well defined yield point, concluding suitable for the application in question

Estudo da cadeia petrolífera no Brasil: uma contextualização das tendências da indústria nacional e das relevâncias do PRH48

In the past few years, the Brazilian oil and gas sector had a considered growth, gaining enough relevance at international level, and being extremely important for the Brazilian socioeconomic development. However, the sector is still limited due to technical deficiencies. This work aims to conduct a current study, comprehending the entire oil chain, since it is possible to mention the Brazilian market updates on this context. To support this study, the historical development of the Brazilian petroleum industry was presented and the main stages of the production process were exposed with an emphasis on exploration and production phases. The new technologies developed for deepwater extractions, such as the pre-salt regions, were also discussed and, in the end, the relation of this growing market with the opportunities of the Human Resources Program of n. 48 was highlighted. This program identifies the market's actual needs and it's scarce's areas with the purpose of building capacity and qualified workforces, since it is also aimed, in a national level, a self-sufficient human resources for the sector

Estudo do efeito Bauschinger em tubos de aço API 5l x70 aplicados no transporte de petróleo e gás

Despite the growing concern in seeking more sustainable energy sources, oil demand is likely to grow in coming years. To keep up with this growth, the oil industry has increasingly invested in innovation and efficiency. Knowing that, new technologies have been developed to explore deeper waters, without giving up the best practices in worldwide operational safety. The use of rigid pipelines in deepwater offshore facilities is increasing quickly and because of this, the ways of storing and launching pipe have been studied and perfected. In this paper the Bauschinger effect on API 5L X70 steel was analyzed proving that there was a reduction in yield strength when an effort was applied in a previous direction, then an effort was then applied in the opposite direction. To observe this phenomenon, the tensile test was conducted to determine the mechanical properties of the base metal, such as yield stress, tensile strength, elasticity and maximum tensile, so then compare it with the results obtained in the Bauschinger Effect Test. The analysis results showed that the steel had high resistance, with good plastic deformation capacity without failing, well-defined yield point, showing itself appropriate for the operation of oil and gas pipes

Características do aço API X70 utilizado em tubos de transporte de petróleo e gás

Having in mind that petroleum's history presents a huge growth, the exploration and production areas have been receiving lots of investments, in order to attend the increasing demand for gas and petroleum. Looking through that scenario, new technologies have been evolving in favor of discovering new natural petroleum deposits and act with effectiveness in truly deep waters without giving up the worldwide best operational security practices. The use of rigid pipes in marine installations have been rising quickly and, thanks to this reality, the many storage and pipe launching forms became study objects and are getting improved. The analysis of steel API X70 characteristics, proving that they are suitable for use in pipes developed to transport gas and petroleum is the theme of this presentation. A tensile test was conducted to determine the base metal's mechanical properties, draining's tension, traction's resistance, elasticity's modulus and maximum tension. An aspect that is concerning too is the metallographic analysis, in order to determine the studied iron's microstructure. Results of analyzes showed that the steel has high resistance, with good capacity for deformation and well defined yield point, concluding suitable for the application in question

Estudo da cadeia petrolífera no Brasil: uma contextualização das tendências da indústria nacional e das relevâncias do PRH48

In the past few years, the Brazilian oil and gas sector had a considered growth, gaining enough relevance at international level, and being extremely important for the Brazilian socioeconomic development. However, the sector is still limited due to technical deficiencies. This work aims to conduct a current study, comprehending the entire oil chain, since it is possible to mention the Brazilian market updates on this context. To support this study, the historical development of the Brazilian petroleum industry was presented and the main stages of the production process were exposed with an emphasis on exploration and production phases. The new technologies developed for deepwater extractions, such as the pre-salt regions, were also discussed and, in the end, the relation of this growing market with the opportunities of the Human Resources Program of n. 48 was highlighted. This program identifies the market's actual needs and it's scarce's areas with the purpose of building capacity and qualified workforces, since it is also aimed, in a national level, a self-sufficient human resources for the sector

Estudo do efeito Bauschinger em tubos de aço API 5l x70 aplicados no transporte de petróleo e gás

Despite the growing concern in seeking more sustainable energy sources, oil demand is likely to grow in coming years. To keep up with this growth, the oil industry has increasingly invested in innovation and efficiency. Knowing that, new technologies have been developed to explore deeper waters, without giving up the best practices in worldwide operational safety. The use of rigid pipelines in deepwater offshore facilities is increasing quickly and because of this, the ways of storing and launching pipe have been studied and perfected. In this paper the Bauschinger effect on API 5L X70 steel was analyzed proving that there was a reduction in yield strength when an effort was applied in a previous direction, then an effort was then applied in the opposite direction. To observe this phenomenon, the tensile test was conducted to determine the mechanical properties of the base metal, such as yield stress, tensile strength, elasticity and maximum tensile, so then compare it with the results obtained in the Bauschinger Effect Test. The analysis results showed that the steel had high resistance, with good plastic deformation capacity without failing, well-defined yield point, showing itself appropriate for the operation of oil and gas pipes

Inhibition of photosynthesis by high temperature in oak (Quercus pubescens L.) leaves grown under natural conditions closely correlates with a reversible heat-dependent reduction of the activation state of ribulose-1,5-bisphosphate carboxylase/oxygenase

Inhibition of the net photosynthetic CO2 assimilation rate (Pn) by high temperature was examined in oak (Quercus pubescens L.) leaves grown under natural conditions. Combined measurements of gas exchange and chlorophyll (Chl) a fluorescence were employed to differentiate between inhibition originating from heat effects on components of the thylakoid membranes and that resulting from effects on photosynthetic carbon metabolism. Regardless of whether temperature was increased rapidly or gradually, Pn decreased with increasing leaf temperature and was more than 90% reduced at 45 °C as compared to 25 °C. Inhibition of Pn by heat stress did not result from reduced stomatal conductance (gs), as heat-induced reduction of gs was accompanied by an increase of the intercellular CO2 concentration (Ci). Chl a fluorescence measurements revealed that between 25 and 45 °C heat-dependent alterations of thylakoid-associated processes contributed only marginally, if at all, to the inhibition of Pn by heat stress, with photosystem II being remarkably well protected against thermal inactivation. The activation state of ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco) decreased from about 90% at 25 °C to less than 30% at 45 °C. Heat stress did not affect Rubisco per se, since full activity could be restored by incubation with CO2 and Mg2+. Western-blot analysis of leaf extracts disclosed the presence of two Rubisco activase polypeptides, but heat stress did not alter the profile of the activase bands. Inhibition of Pn at high leaf temperature could be markedly reduced by artificially increasing Ci. A high Ci also stimulated photosynthetic electron transport and resulted in reduced non-photochemical fluorescence quenching. Recovery experiments showed that heat-dependent inhibition of Pn was largely, if not fully, reversible. The present results demonstrate that in Q. pubescens leaves the thylakoid membranes in general and photosynthetic electron transport in particular were well protected against heat-induced perturbations and that inhibition of Pn by high temperature closely correlated with a reversible heat-dependent reduction of the Rubisco activation state.

The cellular and molecular responses to a novel nucleotide analogue, GS-9219

GS-9219 is a cell-permeable double-prodrug of the acyclic nucleotide analogue 9-(2-phosphonylmethoxyethyl)guanine (PMEG). The conversion of GS-9219 to its active metabolite, PMEG diphosphate (PMEGpp), involves several intracellular enzymatic reactions which reduces the concentration of nephrotoxic PMEG in plasma. PMEGpp competes with the natural substrate, dGTP, for incorporation by DNA polymerases. The lack of a 3'-hydroxyl moiety makes PMEGpp a de facto DNA chain-terminator. The incorporation of PMEGpp into DNA during DNA replication causes DNA chain-termination and stalled replication forks. Thus, the primary mechanism of action of GS-9219 in replicating cells is via DNA synthesis inhibition. GS-9219 has substantial antiproliferative activity against activated lymphocytes and tumor cell lines of hematological malignancies. Tumor cell proliferation was significantly reduced as measured by PET/CT scans in dogs with advanced-stage, spontaneously occurring non-Hodgkin's lymphoma (NHL).^ The hypothesis of this dissertation is that the incorporation of PMEGpp into DNA during repair re-synthesis would result in the inhibition of DNA repair and accumulation of DNA damage in chronic lymphocytic leukemia (CLL) cells and activate signaling pathways to cell death.^ To test this hypothesis, CLL cells were treated with DNA-damaging agents to stimulate nucleotide excision repair (NER) pathways, enabling the incorporation of PMEGpp into DNA. When NER was activated by UV, PMEGpp was incorporated into DNA in CLL cells. Following PMEGpp incorporation, DNA repair was inhibited and led to the accumulation of DNA strand breaks. The combination of GS-9219 and DNA-damaging agents resulted in more cell death than the sum of the single agents alone. The presence of DNA strand breaks activated the phosphatidylinositol 3-kinase-like protein kinase (PIKK) family members ataxia-telangiectasia mutated (ATM) and DNA-dependent protein kinase (DNA-PK). The activated ATM initiated signaling to the downstream target, p53, which was subsequently phosphorylated and accumulated to exert its apoptotic functions. P53-targeted pro-apoptotic genes, Puma and Bax, were upregulated and activated when DNA repair was inhibited, likely contributing to cell death. ^

A integração da indústria de energia elétrica na América do Sul: análise dos modelos técnicos e de regulamentação.

Os recursos energéticos naturais não estão distribuídos uniformemente pelo globo terrestre, e são raros os países que os têm na quantidade e na qualidade que necessitam para atender as suas necessidades. Ante a essa realidade, o comércio de energéticos tem sido a forma principal de acesso dos países que não os dispõem em relação as suas necessidades. Esse comércio, que muitas vezes é regido por tratados ou acordos firmados entre países ou blocos econômicos regionais, diversificou-se, traspassou fronteiras e, atualmente, tornou-se um item significativo nas pautas de exportações de vários países. A evolução desse comércio tem a favor a alternativa de integração por meio de interconexões estratégicas de redes e da constituição de mercados comuns, que viabilizam a exploração do potencial de complementariedade energética de forma mais racional. Diante desse contexto, esta dissertação apresenta um estudo exploratório que avalia o estado da arte da integração energética sul-americana e faz análises dos modelos técnicos, das regulamentações, das regulações regionais e multilaterais estabelecidas pelos blocos econômicos sul-americanos e pela Organização Mundial do Comércio. De forma complementar, o estudo verifica e apresenta os fatores que podem comprometer o avanço e a instituição de um futuro mercado comum de energia no continente, conclui pela viabilidade do prosseguimento de ações em prol da ampliação da integração da indústria de energia elétrica na América do Sul e tece recomendações. Os resultados e as recomendações deste trabalho oferecem um embasamento procedimental para a gestão e a atuação institucional dos envolvidos no processo de integração energética da indústria de energia elétrica da região sul americana.

Obtenção de Mo2C com adição de Co por reação gás-sólido em reator de leito fixo

Sulfur compounds emissions have been, on the late years, subject to more severe environmental laws due to its impact on the environment (causing the acid rain phenomena) and on human health. It has also been object of much attention from the refiners worldwide due to its relationship with equipment’s life, which is decreased by corrosion, and also with products’ quality, as the later may have its color, smell and stability altered by the presence of such compounds. Sulfur removal can be carried out by hydrotreating (HDT) which is a catalytic process. Catalysts for HDS are traditionally based on Co(Ni)-Mo(W)/Al2O3. However, in face of the increased contaminants’ content on crude oil, and stricter legislation on emissions, the development of new, more active and efficient catalysts is pressing. Carbides of refractory material have been identified as potential materials for this use. The addition of a second metal to carbides may enhance catalytic activities by increasing the density of active sites. In the present thesis Mo2C with Co addition was produced in a fixed bed reactor via gas-solid reaction of CH4 (5%) and H2(95%) with a precursor made of a mix of ammonium heptamolybdate [(NH4)6[Mo7O24].4H2O] and cobalt nitrate[Co(NO3)2.6H2O] at stoichiometric amounts. Precursors’ where analyzed by XRF, XRD, SEM and TG/DTA. Carboreduction reactions were carried out at 700 and 750°C with two cobalt compositions (2,5 and 5%). Reaction’s products were characterized by XRF, XRD, SEM, TOC, BET and laser granulometry. It was possible to obtain Mo2C with 2,5 and 5% cobalt addition as a single phase at 750°C with nanoscale crystallite sizes. At 700°C, however, both MoO2 and Mo2C phases were found by XRD. No Co containing phases were found by XRD. XRF, however, confirmed the intended Co content added. SEM images confirmed XRD data. The increase on Co content promoted a more severe agglomeration of the produced powder. The same effect was noted when the reaction temperature was increased. The powder synthesized at 750°C with 2,5% Co addition TOC analysis indicated the complete conversion from oxide material to carbide, with a 8,9% free carbon production. The powder produced at this temperature with 5% Co addition was only partially converted (86%)