988 resultados para Extração de óleo


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Celecoxib (CB) and lumiracoxib (LM) are potent COX-2 inhibitors widely marketed for the treatment of rheumatoid arthritis and osteoarthritis. Nevertheless, it is difficult to obtain because it are protected under patents. The aim of this work was to develop an extraction method of drugs, CB and LM, in order to obtain the drug with a purity degree appropriated for use in research projects. The developed method showed to be effective of both drugs, becoming interesting due to its low cost, easy and speed of execution, application to different dosage forms (capsules and tablets) and drugs with different physicochemical properties.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work report the seasonal variation of composition of the volatile oils from leaves and from flowers of Myrcia salzmannii harvested in the sand dunes of Salvador, Bahia, northeastern region of Brazil in the years 2001 and 2003. The oils were analyzed by GC-FID and GC-MS being identified 49 components. Nine essential oil samples of leaves collected on different months and years and one sample of flowers were analyzed. β-Caryophyllene and α-humulene were the only compounds present in all of the samples being the first the majority compound.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work describes a simple and economical experiment for the extraction and purification of chlorophyll a from Spirulina maxima. Extraction and purification of natural compounds can be considered one of the most illustrative experiments that can be performed in Organic Chemistry courses. Particularly, the chromatography of dyes and pigments allows students to have a better comprehension of the chromatography separations. These compounds represent an important class of organic pigments applied in pharmaceutical, cosmetic, detergent compositions, and various other fields and can be extracted from plants and algae. To extract, separate and purify chlorophyll a from associated pigments such as xanthophylls, carotenes, and pheophytins, very costly processes are reported. The present approach is perfectly adequate for use in Chemistry experiments for undergraduate students.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A method using ultrasonication extraction for the determination of 17 polycyclic aromatic hydrocarbons (PAHs), selected by the USEPA and NIOSH as "consent decree" priority pollutants, in soil by High Performance Liquid Chromatography (HPLC) was studied. Separation and detection were completed in 20 min with a C18 columm, acetonitrile-water gradient elution and ultraviolet absorption and fluorescence detections. The detection limits, for a 10 µL of solution injection, were less than 9,917 ng/g in UV detection and less than 1,866 ng/g in fluorescence detection. Several organic solvents were tested for extraction of the 17 PAHs from soils. Acetone was the best solvent among the three solvents tested, and the order of the extraction efficiencies was: acetone>methanol>acetonitrile. Ultrasonication using acetone as solvent extraction was used to evaluate the biodegradation of those compounds in contaminated soil during a vermicomposting process.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This paper describes a simple experiment employing the essential oil of limes which can be applied in undergraduate organic chemistry laboratory classes for the teaching of thin layer chromatography (TLC). The experiment consists in submit lime peel oil to TLC separation employing hexane and dichloromethane as the eluents and five different systems for visualization of the chromatogram. In one experiment it is possible to teach the different variables of the TLC technique. This experiment may also be performed following vapor distillation and liquid-liquid extraction technique in experimental classes.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Two samples of calcic bentonite of the Santa Elena Peninsula, Ecuador, were pillared with Al13 ions in the ratio of 10, 15 and 20 meq of Al g-1 of clay, calcinated at 573, 723 and 873 ºK and acid activated with 4, 6 and 8 mol L-1 H2SO4. Analyses by X-ray diffraction, X-ray fluorescence, differential and gravimetric thermal, density, surface area and porosity, were applied in order to study the modifications occurred in the crystalline structure of the montmorillonite. The 8 mol L-1 H2SO4 acid-activated 15 meq of Al g-1 of clay at 573 ºK Al-pillared samples indicated the best results in the bleaching of the soybean oil measured by UV-visible spectrophotometer.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The objective of this study was to obtain and evaluate physicochemical and functional properties of protein concentrates from Micropogonias furnieri produced by pH shifting process, using alkaline and acid solubilization followed by isoelectric precipitation of muscle proteins. The concentrates showed high protein content and the maxim solubility for the minced (96.5%), for the alkaline (97.5%) and acid (93.7%) extraction was obtained at pH 11.0. The water holding capacity of the alkaline concentrate resulted in a value same or superior to water holding capacity of the acid concentrate in all investigated values of pH. The oil holding capacity of alkaline and acid concentrates showed no significant difference between the studied processes.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The volatile oil obtained from the leaves of Hydrocotyle bonariensis Lam (Araliaceae) was analyzed by GC, Chiral-GC and GC-MS. It was identified 14 compounds and the monoterpene (+)-limonene (53.6%) and sesquiterpene γ-muurolene (10.5%) were the main components. The allelopathic effects of the oil were evaluated against two seeds, Lactuca sativa and Allium cepa. The results show that the oil exhibited inhibition effects in the germination and seedling growth of plants species relative to the control.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A phenolic fraction was obtained from of the acetone-water-acetic acid extract of Inga edulis leaves, by liquid-liquid partition and SPE-C18 cartridges. This method provided an increase of 108, 66, 51, 50 and 36% of flavonols, proanthocyanidins, total polyphenols, gallotannins and flavanols, respectively. The major phenolics in purified fraction were procyanidin B2, catechin and myricetin-3-O-α-L-rhamnopyranoside, which achieved increases of 111, 47 and 45%, respectively, after SPE. Acid hydrolysis confirmed the presence of procyanidins, prodelphinidins and glycosylated flavonoids.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A solid-phase in-line extraction system for water samples containing low levels of emerging contaminants is described. The system was specially developed for large volume samples (up to 4 L) using commercial solid-phase extraction (SPE) cartridges. Four sets containing PTFE-made connectors, brass adapters and ball valves were used to fit SPE cartridges and sample bottles to a 4-port manifold attached to a 20 L carboy. A lab-made vacuum device was connected to the manifold cap. The apparatus is robust and less expensive than the typical available system. Its also provides less experimental handling, avoiding cross contamination and sample losses.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The objective of this work was to use the high-pressure homogenizer (HPH) to prepare stable oil/water nanoemulsions presenting narrow particle size distribution. The dispersions were prepared using nonionic surfactants based on ethoxylated ether. The size and distribution of the droplets formed, along with their stability, were determined in a Zetasizer Nano ZS particle size analyzer. The stability and the droplet size distribution in these systems do not present the significant differences with the increase of the processing pressure in the HPH). The processing time can promote the biggest dispersion in the size of particles, thus reducing its stability.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Three analytical methods for the determination of BTEX in water were optimized and validated. With the best method the analytes were extracted of 10 mL of sample with 2.50 g of NaCl in headspace vial of 20 mL by HS and SPME to 40 ºC for 30 min for adsorption and to 250 ºC for 4 min for desorption and were analyzed by GC-MS. The recovery was between 97.9% and 104.3%, and the limit of detection was 2.4 ng L-1 for o-xylene. This method was using to analyze BTEX in water supply and surface water in Ouro Preto city. No sample had concentrations of BTEX above the legislation.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The development of modern analytical tools plays an important role in quality control. The main purpose of this study was to explore the use of subcritical water as a versatile analytical tool, employed simultaneously as a reagent and solvent, as well as the application of high temperature-high resolution gas chromatography (HT-HRGC) to develop a procedure for the analysis of triacylglycerides and fatty acids in Azadirachta indica A. Juss. (Neem) oil without the need for solvents, chemical reagents, or catalytic agents. The developed method presented satisfactory results and is in agreement with the concepts of Green Analytical Chemistry (GAC).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Poly (3-hydroxybutyrate) (P(3HB)) is a biopolymer, completely biodegradable, which has similar properties to fuel-based polymers. However to make it economically competitive it is necessary the study of cheap sources of substrate. The influence of hydrolyzed rice starch supplemented with soybean oil at different temperatures (30, 35 and 40 °C) was studied in the production of P(3HB) by C. necator. The percentage of P(3HB) produced in the cultures at 30, 35 °C was 30, 39% and 35, 43% without and with supplementation of oil, respectively. The culture at 40 °C showed no production phase due to a possible oxygen limitation. These results demonstrate that hydrolyzed rice starch supplemented with soybean oil increases the yield of P(3HB) and temperature of 35 ºC is the most favorable for biopolymer production.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The quantity of salts in the crude oils depends on the origin and of the wells production and these salts cause several problems during the transport and the process of refine as corrosions, incrustations and deactivation of the employed catalysts in the refineries. In this study were implemented changes for improvements in the execution of ASTM D 6470 method and has also developed a new methodology of extraction system of salts using process of mechanical agitation without heating. The results of the optimization produce larger efficiency and safety to the process compared to the traditional ASTM method.