Spridning av innovation i högre utbildning : En studie av spridningen av Videochat vid Högskolan Dalarna

Syftet med denna uppsats har varit att beskriva och analysera spridningen av en innovation, Videochat, inom Högskolan Dalarna för att utifrån det lägga förslag på fortsatt arbete för att öka spridningen av Videochat. Frågorna som legat till grund för uppsatsen är: Vad är Videochattens spridningstakt inom Högskolan Dalarna? På vilka grunder har Videochat anammats inom Högskolan Dalarna? I de fall man inte har anammat Videochat, på vilka grunder man gjort det valet? Var och hur kan åtgärder sättas in för att stimulera spridningen av Videochat? Undersökningen har baserats på ett webbaserat frågeformulär bland Högskolan Dalarnas undervisande personal och frågorna i formuläret utarbetades med hjälp av förberedande intervjuer med nyckelpersoner inom Högskolan Dalarna. Undersökningen visar att användningen av Videochat har spridits olika långt på de olika akademierna och på två av fyra akademier anses det finnas ett behov av särskilda åtgärder för att stimulera spridningstakten. Den främsta anledningen till att börja använda Videochat är möjligheten att föreläsa för nätstudenter och campusstudenter samtidigt. Undersökningen visar samtidigt att anledningarna för att använda Videochat skiljer sig mellan de olika akademierna. Ett antal åtgärder föreslås för att stimulera spridning på de två akademier med lägst andel användare av Videochat där de viktigaste går ut på att öka kunskapen om Videochat och dess fördelar.

Voice over IP 2.0: an analysis of limits and potential of IP2IP telecommunication

Internet Telephony (VoIP) is changing the telecommunication industry. Oftentimes free, VoIP is becoming more and more popular amongst users. Large software companies have entered the market and heavily invest into it. In 2011, for instance, Microsoft bought Skype for 8.5bn USD. This trend increasingly impacts the incumbent telecommunication operators. They see their main source of revenue – classic telephony – under siege and disappear. The thesis at hand develops a most-likely scenario in order to determine how VoIP is evolving further and it predicts, based on a ten-year forecast, the impact it will have on the players in the telecommunication industry.The paper presents a model combining Rogers’ diffusion and Christensen’s innovation research. The model has the goal of explaining the past evolution of VoIP and to isolate the factors that determine the further diffusion of the innovation. Interviews with industry experts serve to assess how the identified factors are evolving.Two propositions are offered. First, VoIP operators are becoming more important in international, corporate, and mobile telephony. End-to-end VoIP (IP2IP) will exhibit strong growth rates and increasingly cannibalize the telephony revenues of the classic operators. Second, fix-net telephony in SMEs and at home will continue to be dominated by the incumbents. Yet, as prices for telephony fall towards zero also they will implement IP2IP in order to save costs. By 2022, up to 90% of the calls will be IP2IP. The author recommends the incumbents and VoIP operators to proactively face the change, to rethink their business strategies, and to even be open for cooperation.

Innovation districts: an investigation of the replication of the 22@ Barcelona’s Model in Boston

In 2000, the city of Barcelona launched 22@ Barcelona, dubbed the innovation district. The city sees the project as a means to accelerate Barcelona’s transition toward the knowledge economy. Other cities around the world have since followed the example of Barcelona, building or planning to build their own innovation districts. Boston began to establish its innovation district in 2010. Cities’ ultimate goal for these initiatives is to become more innovative and thus more competitive. Innovative districts are different from technology parks in that they aim to respond to a new economic paradigm in which economic production flows back to cities. The 22@ Barcelona model involves theoretical designs regarding five layers of innovation: economics, urban planning, productive, innovative, and creative. The comparative approach between 22@ Barcelona and Boston’s Innovation District intends to highlight the similarities and differences between those two innovation districts as well as providing a framework to define innovation districts.

Leadership of portuguese community schools in the East Coast of the United States and the public policies of education: a multiple case studies

The Portuguese community schools of the United States located in the areas of larger Portuguese population concentration are social organizations that come materializing throughout decades the designs of the educative policies of the Portuguese government in relation to the expansion and preservation of the language, the culture and the history of Portugal. These designs of the educative policies are enrolled in the Constitution of the Republic (1976), in the Basic Law of Educative System (1986) and, over all, in the successive legislative norms (Decree-laws and ordinances) of the successive governments. Portuguese community schools in the United States are structuralized in analogous way to schools of the Portuguese geographic space. For this qualitative study (multiple case), four directors of Portuguese schools of the East Coast of the United States were interviewed; two schools are in the state of Rhode Island and the other two are in the state of Massachusetts. Also, it was administered the questionnaire on practices of leadership “Leadership Practices Inventory” (LPI) of Kouzes and Posner (2002) to collect additional data about practices of leadership on the directors of the schools. The LPI evaluates practices of leadership classifying them in five domains: (a) Model the way; (b) Inspire a shared vision; (c) Challenge the process; (d) Enable others to act; and, (e) Encourage the heart. Results of this qualitative research indicate that the Portuguese Government has not had an educative policy stimulant, coherent and consistent of support, incentive, maintenance and diffusion of the Portuguese language and culture and the directors of the studied schools they have a proactive and serving leadership style in conducting the management of Portuguese community schools. The five practices of leadership are highly practiced by the directors of the studied schools above all the practices “Enable others to act” and “Encourage the heart”.

The influence of preparation method of OC1OC6-PPV films on the photo-oxidation process

Poly(p-phenylene vinylene) (PPV) derivatives are well known for their applications in polymer light emitting diodes (PLEDs). PPV derivatives are highly susceptible to photo-oxidation though, which is mainly caused by the scission of the vinyl double bond on the polymer backbone. In this work, we show that Langmuir-Blodgett (LB) films are less degraded than cast films of a PPV derivative (OC1OC6-PPV). Both films had similar thickness (similar to 50 nm) to allow for a more realistic comparison. Degradation was monitored with UV-vis and FTIR spectroscopies. The results indicated that cast films were completely degraded in ca. 400 min, while LB took longer time, i.e. about four times the values for the cast films. The differences can be attributed to the more compact morphology in the LB than in the cast films. With a compact morphology the diffusion of oxygen in the LB film is hampered and this causes a delay in the degradation process. (c) 2006 Elsevier Ltd. All rights reserved.

In Vitro Ultrasound Influence on Cutaneous Permeation of Hyaluronidase

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Oxygen diffusion in superconducting oxides

Since the discovery of high-temperature superconductivity of cuprate oxides, it has been clear that it is strongly affected by the oxygen content, which is also a crucial factor to determine other physical properties of high T-c superconductors. Non-stoichiometric (interstitial) oxygen strongly influences the physical properties of various superconducting oxides, in particular by creating conducting holes. It is now ascertained that the amount of holes injected depends not only on the content of interstitial oxygen, but also on its ordering. Rearrangement of the oxygen ordering may occur even below room temperature due to the unusual high mobility of these atoms. This way, mechanical spectroscopy is one of the most adequate techniques for the study of the mobility (diffusion) of oxygen atoms. This technique allows the determination of the jump frequency of an atomic species precisely, regardless of the model or the different possible types of jumps. In order to evaluate the mobility and the effect of oxygen content on these oxides, ceramic samples we prepared and submitted to several oxygen removal cycles alternately with mechanical relaxation measurements. As for SBCO, it was assumed that the peak was due to O(1)-O(5) jumps of oxygen atoms at the chain terminals or in chain fragments in the orthorhombic phase. In the case of BSCCO, the results showed complex anelastic relaxation structures, which were attributed to interstitial oxygen atom jumps between two adjacent CuO planes.

Oxygen Diffusion in Ti-20Mo Alloys, used as Biomaterial, Measured by Mechanical Spectroscopy

Titanium alloys are favorable implant materials for orthopedic applications, due to their desirable properties such as good corrosion resistance, low elasticity modulus, and excellent biocornpatibility. The research on titanium alloys is concentrated in the beta type, as the Ti-20Mo alloys and the addition of interstitial elements in these metals cause changes in their mechanical properties. The mechanical spectroscopy measurements have been frequently used in order to verify the behavior of these interstitials atoms in metallic alloys. This paper presents the study of oxygen diffusion in Ti-20Mo alloys using mechanical spectroscopy measurements. A thermally activated relaxation structure was observed in the sample after oxygen doping. It was associated with the interstitial diffusion of oxygen atoms in a solid solution in the alloy. The diffusion coefficient for the oxygen diffusion in the alloy was obtained by the frequency dependence of the peak temperature and by using a simple mathematical treatment of the relaxation structure and the Arrhenius law.

The transformation between exploration and exploitation applied to inventors of packaging innovations

While the inventor is often the driver of an invention in the early stages, he/she needs to move between different social networks for knowledge in order to create and capture value. The main objective of this research is to propose a literature-based framework based on innovation network theory and complemented with C-K theory, in order to analyze the invention/innovation process of inventors and the product concepts in a packaging industry context. Empirical input from three case studies of packaging inventions and their inventors is used to elaborate the suggested framework.The article identifies important gaps in the literature of innovation networks. This is addressed through a theoretical framework based on network theories, complemented with C-K theory for the product design level. The strength-of-ties dimension of the theoretical framework suggests, in agreement with the mainstream literature and the cases presented, that weak ties are required to access the knowledge related to exploration networks and strong ties are required to utilize the knowledge in the exploitation network. The transformation network is an intermediate step acting as a bridge where entrepreneurs can find required knowledge. The transformation network is also an intermediate step where entrepreneurs find financing and companies interested in commercializing inventions. (C) 2010 Elsevier Ltd. All rights reserved.

Comparative degradation of ZnO- and SnO(2)-based polycrystalline non-ohmic devices by current pulse stress

The degradation behaviour of SnO(2)-based varistors (SCNCr) due to current pulses (8/20 mu s) is reported here for the first time in comparison with the ZnO-based commercial varistors (ZnO). Puncturing and/or cracking failures were observed in ZnO-based varistors possessing inferior thermo-mechanical properties in comparison with that found in a SCNCr system free of failures. Both systems presented electric degradation related to the increase in the leakage current and decrease in the electric breakdown field, non-linear coefficient and average value of the potential barrier height. However, it was found that a more severe degradation occurred in the ZnO-based varistors concerning their non-ohmic behaviour, while in the SCNCr system, a strong non-ohmic behaviour remained after the degradation. These results indicate that the degradation in the metal oxide varistors is controlled by a defect diffusion process whose rate depends on the mobility, the concentration of meta-stable defects and the amount of electrically active interfaces. The improved behaviour of the SCNCr system is then inferred to be associated with the higher amount of electrically active interfaces (85%) and to a higher energy necessary to activate the diffusion of the specific defects.

Short-term evaluation of the pulpo-dentin complex response to a resin-modified glass-ionomer cement and a bonding agent applied in deep cavities

Objectives. To evaluate the response of the pulpo-dentin complex following application of a resin-modified glass-ionomer cement or an adhesive system in deep cavities performed in human teeth.Methods. Deep class V cavities were prepared on the buccal surface of 26 premolars. In Group I the cavity walls (dentin) and enamel were conditioned with 32% phosphoric acid and the dentin adhesive system One Step (Bisco, Inc., Itasca, IL, USA) was applied. In Groups 2 and 3, before total etching and application of bonding agent, the cavity floor was lined with the resin-modified glass-ionomer cement-Vitrebond (3M ESPE Dental Products Division, St. Paul, MN, USA) or the calcium hydroxide cement-Dycal (control group, Dentsply, Mildford, DE, USA), respectively. The cavities were restored using light-cured Z-100 composite resin (3M ESPE). The teeth were extracted between 5 and 30 days and prepared for microscopic assessment. Serial sections were stained with H/E, Masson's trichrome, and Brown and Brenn techniques.Results. In Group 1, the inflammatory response was more evident than in Groups 2 and 3. Diffusion of dental material components across dentinal tubules was observed only in Group 1, in which the intensity of the pulp response increased as the remaining dentin thickness decreased. Bacteria were evidenced in the lateral walls of two samples (Group 2) which exhibited no inflammatory response or tissue disorganization.Conclusions. Based on the experimental conditions, it was concluded total acid etching followed by application of One Step bonding agent cannot be recommended as adequate procedures. In this clinical condition the cavity walls should be lined with a biocompatible dental material, such as Vitrebond or Dycal. 2003 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Transenamel and transdentinal cytotoxicity of carbamide peroxide bleaching gels on odontoblast-like MDPC-23 cells

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Trans-enamel and trans-dentinal cytotoxic effects of a 35% H2O2 bleaching gel on cultured odontoblast cell lines after consecutive applications

To evaluate the trans-enamel and trans-dentinal cytotoxic effects of a 35% H2O2 bleaching gel on an odontoblast-like cell lines (MDPC-23) after consecutive applications.Fifteen enamel/dentine discs were obtained from bovine central incisor teeth and placed individually in artificial pulp chambers. Three groups (n = 5 discs) were formed according to the following enamel treatments: G1: 35% H2O2 bleaching gel (15 min); G2: 35% H2O2 bleaching gel (15 min) + halogen light (20 s); G3: control (no treatment). After repeating the treatments three consecutive times, the extracts (culture medium + gel components that had diffused through enamel/dentine discs) in contact with the dentine were collected and applied to previously cultured MDPC-23 cells (50 000 cells cm(-2)) for 24 h. Cell metabolism was evaluated by the MTT assay and data were analysed statistically (alpha = 5%; Kruskal-Wallis and Mann-Whitney U-test). Cell morphology was analysed by scanning electron microscopy.Cell metabolism decreased by 92.03% and 82.47% in G1 and G2 respectively. G1 and G2 differed significantly (P < 0.05) from G3. Regardless of halogen light activation, the application of the bleaching gel on the cultured odontoblast-like cells caused significantly more severe cytotoxic effects than those observed in the nontreated control group. In addition, significant morphological cell alterations were observed in G1 and G2.After three consecutive applications of a 35% H2O2 bleaching agent, the diffusion of the gel components through enamel and dentine caused severe toxic effects to cultured pulp cells.

Profiling the Proteome of the Venom from the Social Wasp Polybia paulista: A Clue to Understand the Envenoming Mechanism

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Carbon dioxide formation during initial stages of photodegradation of poly(ethyleneterephthalate) (PET) films

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)