1000 resultados para Cana-de-açúcar - Doenças e pragas - Controle biologico
Resumo:
This work presents the results of morphological and physical-chemical characteristics of a sugar cane bagasse ash material sample produced under controlled burning conditions. The investigation was carried out by analyzing chemical composition, X-ray diffraction, 29Si nuclear magnetic resonance, morphology, thermal analysis, particle size, specific surface, and density. Moreover, the pozzolanic activity of the ash was evaluated by pozzolanic activity index and Chapelle's method. The results suggest that the sugar cane bagasse ash has adequate properties to be used as pozzolan in construction materials.
Resumo:
São Paulo state (Brazil) has an important area of sugarcane production, mainly for obtaining alcohol and sugar, where there is an intensive use of pesticides. An important recharge zone of Guarani aquifer, with supplies water for the local population, is located at Ribeirão Preto city, so the local behavior of pesticides must be investigated. The GUS index was obtained by using the paramenters Koc and half-life for hezazinone herbicide, determinated in representative soil of this region. This study has demonstrated that there is potential risks of hexazinone leaching to ground water, indicating that this herbicide must be monitored in ground water.
Resumo:
In this work, a methodology for the characterization of sugar cane bagasse was validated. Bagasse pre-treated with steam in a 5000 L reactor at a pressure of 15.3 kgf/cm², during 7 min, was used to test the methodology. The methodology consisted of the hydrolysis of the material with H2SO4 at 72% v/v, for the quantification of carbohydrates, organic acid, furfural and hydroxymethylfurfural by HPLC; insoluble lignin and ash by gravimetry; and soluble lignin by spectrophotometry. Linearity, repeatability, reproducibility and accuracy of the results obtained in two Research Laboratories were determined, and were considered to be suitable for the validation of the methodology.
Resumo:
In this work, four different process configurations, including three simultaneous saccharification and fermentation (SSF) schemes and one separate hydrolysis and fermentation (SHF) scheme, were compared, at 8% water-insoluble solids, regarding ethanol production from steam-pretreated and alkali-delignified sugar cane bagasse. Two configurations included a 16 h lasting enzymatic presaccharification prior to SSF, and the third one was a classical SSF without presaccharification. Cellulose conversion was higher for the delignified bagasse, and higher in SSF experiments than in SHF. The highest cellulose-to-ethanol conversion (around 60% in 24 h) and maximum ethanol volumetric productivities (0.29-0.30 g/L.h) were achieved in the presaccharification-assisted SSF.
Resumo:
An evaluation was made of the properties of sugarcane bagasse during the storage process for subsequent burning in a boiler. Samples of bagasse were collected over a period of 150 days from the Caeté sugar mill (MG) at various points of the stockpile soon after the sugarcane was pressed to extract its juice, as well as from natural bagasse, dry and damp. Thermal analyses of the samples were carried out and the results indicated that, during the storage of bagasse, dry or damp, the biomass loses up to 32% of its calorific power, due to decomposition of the hemicellulose.
Resumo:
This paper reports on a modification of the procedures originally described in the French Pharmacopoeia for the UV-visible spectrometric analysis of flavonoids, and proposes a validation of the method and its application in the determination of total flavonoids from sugarcane (Saccharum officinarum) leaves and vinasse. An analysis of precision and accuracy revealed a low relative standard deviation (< 5.0%) and a good recovery percentages (99.79 and 98.34%). A comparison of the spectrometric results against those obtained by high performance liquid chromatography (HPLC-UV) demonstrated complete compatibility between the modified French Pharmacopoeia (spectrometric) and HPLC-UV methods
Resumo:
Sugarcane straw biomass accounts for 1/3 of the energy potential of sugarcane and represents a rich source of sugars. Studies have been intensified for the use of this biomass along with bagasse for the production of cellulosic ethanol. Development of this technological path will allow for taking full advantage of sugarcane, increasing ethanol production without expanding the area cultivated. However, in order for this technology to be viable certain challenges must be overcome, including establishment of appropriate conditions of pretreatment and hydrolysis of these materials for release of fermentable sugars.
Resumo:
The effect of moisture content in the steam treatment and enzymatic hydrolysis of sugarcane bagasse was evaluated. Steam treatment was perfomed at 195-210 ºC for 4-8 min using cane bagasse with moisture contents in the range 16-100 wt% (dry basis). Increased moisture contents not only had a positive influence in recovery of main cane biomass components but also resulted in better substrates for enzymatic hydrolysis. As a result, drying is not required for optimal pretreatment and enzymatic hydrolysis of sugarcane bagasse, which can be processed into second generation ethanol immediately after crushing and hot water washing.
Resumo:
The aim of this study was to evaluate the chemical composition of sugar cane spirits, fermented by different commercial Saccharomyces cerevisiae yeast strains and double distilled by pot still. Sugar cane juices were separately fermented by yeasts CA-11, Y-904, BG-1, PE-2, SA-1 and CAT-1 and distilled by pot still according to the methodology used for whisky production. The alcoholic liquids from first and second distillations were analyzed for concentrations of ethanol, volatile acidity, aldehydes, esters, furfural, higher alcohols and methanol. The sugar cane spirits derived from fermentation by the different yeast strains presented distinct chemical compositions.
Resumo:
This paper describes a five-week mini-project for a general chemistry laboratory course. Activities are included preparations of ethanol and sucrose solutions, calculation of concentrations, determination of densities with densimeters, sugarcane juice fermentation with CO2 capture in alkaline solution, distillation, and determination of amounts of ethanol and CO2 formed. Abilities and concepts normally present in practical general chemistry courses are covered: use of balances, volumetric glassware and densimeters, preparation of solutions, performing of dilutions, determination of solution densities, observation of chemical reactions, stoichiometric calculations, separation of mixtures, and titration.
Resumo:
The aim of this study was to identify, with the use of 31P NMR spectroscopy, organic P species in humic acids (HA) in samples from Oxisol cultivated in chronosequence with sugar cane, pasture and Cerrado. The main forms of P-type found were orthophosphate, monoester-P (phosphate sugars) and P-diester (orthophosphate). The 31P NMR technique proved capable of identifying changes in the areas studied as a function of sugar cane burning time. In areas with 1 and 5 years of burnt cane, a decrease in recalcitrant organic P in humic acids indicated the need for use of P-humic substances for plant nutrition.
Resumo:
The sugarcane industry has huge potential for biorefinery concept application, given its development in recent years. In this context, cane sugar straw has become an attractive raw material for biofuel production. This study aims to investigate the chemical composition of cane sugar straw from different regions of Brazil, and to optimize a hydrothermal pretreatment stage for cellulosic ethanol production. Results of chemical characterization of the cane sugar straw for the regions assessed indicated little influence of place on straw chemical composition. Hydrothermal pretreatment showed high efficiency in hemicellulose removal. Hydrothermal pretreatments operating with temperatures of 190 and 210 ºC presented satisfactory results, reaching values close to 100% hydrolysis.
Resumo:
The aim of this study was to develop an effective and economically viable technology for the treatment of vinasse, prior to its disposal in the soil for fertirrigation, aiming this way at reducing the environmental impacts generated by inadequately discarding this effluent. The primary treatment of vinasse by adsorption was evaluated. Adsorbents were prepared from sugar cane bagasse and their efficiency evaluated in relation to the treatment of vinasse. The process of preparation of activated carbon consisted of carbonizing bagasse at different temperatures followed by chemical activation with NaOH. The carbon samples obtained by solely carbonizing sugar cane bagasse were more efficient for removing turbidity of vinasse than samples activated with NaOH. The sample carbonized at 800 °C was the most efficient for removing turbidity of wastewater (83%). During a process of adsorption of vinasse in two stages, it was possible to obtain color removal, turbidity and COD of approximately 76, 85 and 69%, respectively. After the adsorption step of vinasse, the solid waste generated in the second stage of adsorption can be burned in the boilers of the power plant itself, affording an energy of 4606 cal g-1.
Resumo:
Os vírus pertencentes ao subgrupo do Sugarcane mosaic virus (SCMV, gênero Potyvirus, família Potyviridae) infectam e causam mosaico em diferentes espécies botânicas da subfamília Panicoideae (família Poaceae), porém apenas o SCMV e o Sorghum mosaic virus (SrMV) infectam naturalmente cana-de-açúcar. No Brasil, a espécie SCMV parece ser o único agente causal da doença. Embora a maioria das variedades comerciais de cana-de-açúcar seja considerada resistente ou tolerante ao SCMV, relatos de incidência de mosaico em tais variedades têm ocorrido no campo. Amostras com sintomas, de diversos clones e variedades, foram coletadas em campos experimentais e comerciais de cana-de-açúcar. Dentre as variedades, a RB72-454, uma das mais plantadas no país e considerada resistente à doença, também apresentou plantas com sintomas de mosaico. As amostras foram testadas por DAS-ELISA, com anti-soros policlonais para as espécies SCMV, Johnsongrass mosaic virus (JGMV) e Maize dwarf mosaic virus (MDMV), apresentando resultados negativos. Porém, sintomas de mosaico foram observados em mudas de sorgo "Rio" e "TX2786" quando inoculadas mecanicamente com os isolados, indicando tratar-se de infecção pelo SCMV. RNA total foi extraído das folhas de cana e submetido a RT-PCR com oligonucleotídeos específicos para SCMV e SrMV. Fragmentos específicos de aproximadamente 880 pares de bases foram amplificados com os oligonucleotídeos para o SCMV, confirmando os resultados da inoculação mecânica. Os produtos de PCR foram clonados e seqüenciados. Um dos isolados de SCMV encontrado constitui uma nova estirpe, mais severa, capaz de infectar plantas da variedade RB72-454 e de outras variedades, consideradas tolerantes, no campo.
Resumo:
A reação de genótipos de cana-de-açúcar às populações de Puccinia melanocephala é intensamente influenciada por condições ambientais, dificultando as avaliações de genótipos em condições de campo. O trabalho visou desenvolver um método de inoculação de ferrugem em segmentos de folhas, sob condições ambientais controladas. Os segmentos foram obtidos de plantas com 30 dias de idade da variedade suscetível SP70-1143. Estes foram inoculados (2 x 10(4) esporos viáveis/mL) e acondicionados em tubos de ensaio. Os tratamentos consistiram em diferentes condições de incubação, considerando as variáveis (i) uso ou não de câmara úmida após a inoculação; (ii) imersão de ¼ ou ¾ do segmento no líquido do tubo e (iii) adição ou não de benzimidazol na água do tubo. O melhor tratamento consistiu na imersão de 3/4 dos segmentos em tubos com água, sem câmara úmida aplicada após a inoculação. Após incubação (21 ºC ± 1ºC, 12 h de fotoperíodo), os segmentos mantiveram-se viáveis por até 20 dias e apresentaram bom desenvolvimento de ferrugem. O método mostrou resultados equivalentes quando comparado à inoculação de plantas inteiras de três variedades, permitindo discriminar eficientemente suas reações à ferrugem.