Extensão de um modelo OO formal com aspectos temporais

Na área de Engenharia de Software, há vários modelos formais de especificação orientado a objetos (OO). Um destes é o OO-Method / OASIS. OO-Method se baseia nos seguintes princípios: - dar suporte às noções do modelo conceitual orientado a objetos; - integrar os modelos formais com metodologias de aceitação industrial; - possibilitar a produção de software avançado que inclua a geração completa de código (estática e dinâmica) do desenvolvimento comercial. O processo de desenvolvimento consiste em levantar as propriedades principais do sistema em desenvolvimento (modelo conceitual) por parte do engenheiro de software, e construir de forma automática, em qualquer momento (por um processo de conversão gráfico-textual) a especificação formal orientada a objetos em OASIS (Open and Active Specifications of Information System) que constituirá um repositório de alto nível do sistema. O objetivo de OASIS é expressar os requisitos funcionais de um sistema de informação, em um marco formal, que facilite sua validação e geração automática de programas. OASIS não inclui a especificação de aspectos temporais. A modelagem de aspectos temporais é um importante tópico da modelagem de sistemas de informação, porque através destes são representadas as características dinâmicas das aplicações e a interação temporal entre diferentes processos. A especificação de requisitos de aplicações através de modelos orientados a objetos permite representar não só os seus estados, mas também, seu comportamento. Modelos temporais representam também a evolução de objetos com o tempo. Como o estado de um objeto pode ser alterado devido à ocorrência de um evento (fato ocorrido em um determinado instante no tempo), é importante que o modelo utilizado permita apresentar a história destes eventos. O presente trabalho tem por finalidade propor uma extensão temporal a um modelo formal de especificação OO. Esta extensão inclui tanto aspectos estáticos quanto dinâmicos. A extensão de aspectos estáticos estende OASIS com atributos temporais. A extensão dos aspectos dinâmicos, contribuição central do trabalho, estende OASIS com eventos temporais.

O desenho da família como técnica de investigação psicológica: influências da idade, sexo, e ordem de nascimento

Este estudo consiste na investigação do Desenho da Família como uma técnica de investigação psicológica, cujo objetivo é verificar a sua sensibilidade através da influência da idade, sexo e ordem de nascimento. A amostra foi constituída por 300 crianças de 7 a 9 anos, de ambos os sexos, pertencentes a famílias com duas crianças e de mesmo nível sócio-econômico. A aplicação da técnica do Desenho da Família foi realizada individualmente, através da instrução proposta por Porot (1952): "Desenhe sua Família". Esta foi analisada de acordo com um método desenvolvido para este estudo com base nas proposições de diferentes autores, contendo 52 características, obedecendo a três níveis: (a) características gerais do desenho, (b) nível das estruturas formais e (c) nível de conteúdo. Os resultados, analisados através do teste do X², permitiram verificar a sensibilidade da referida técnica, pois, a maioria de suas características relacionaram-se significativamente com as variáveis analisadas. Verificou-se também que enquanto a influência da idade foi mais acentuada em relação, as características gerais do desenho e às do nível das estruturas formais (as quais foram explicadas predominantemente em termos evolutivos e cognitivos), as influências do sexo e da ordem de nascimento o foram em relação às características do nível de conteúdo (as quais foram interpretadas predominantemente em termos projetivos e afetivos). Verificou-se ainda que a análise das características relacionadas significativamente com o sexo permitiu a formulação e a comprovação de uma hipótese sobre a identificação sexual dos sujeitos em relação às figuras parentais (pai e mãe). Por sua vez, a análise das características que sofreram a influência da ordem de nascimento possibilitou a formulação e a comprovação de uma hipótese sobre a rivalidade fraterna, tanto por parte dos primogênitos, quanto por parte dos caçulas. Ao concluir, questionou-se o fato da maioria dos autores considerar o Desenho da Família apenas uma técnica projetiva, recomendou-se prudência na sua interpretação e sugeriu-se a inclusão de alguns aspectos a serem investigados em relação à ordem de nascimento.

Construção de vínculos de confiança empresarial

O trabalho apresentado neste relatório tem por objetivo pesquisar a constituição e o desenvolvimento da confiança entre os empresários participantes do programa Cooperar para Competir, o qual compõe o conjunto de treinamentos oferecidos para o Arranjo Produtivo Local de Birigui pelo SEBRAE-SP em parceria com instituições locais como o Sindicato da Indústrias do Calçado e Vestuário de Birigui, o SESI de Birigui, entre outros. Em termos de metodologia, foi escolhido o método qualitativo para desenvolver uma pesquisa exploratória de estudo de caso (o Cooperar para Competir) e foram utilizadas duas técnicas de pesquisa – a entrevista aberta ou não-dirigida e a técnica de história oral. Para o seu desenvolvimento, foram estabelecidas três grandes áreas de investigação que, juntas, ofereceriam uma visão abrangente do tema analisado: a) a primeira grande área é responsável pelo estudo do contexto e da estrutura econômica do APL em geral, bem como de seus agentes presentes naquela região e suas particularidades. Nesta primeira parte são apresentadas discussões sobre clusters, sua importância e representatividade no Brasil e no mundo, bem como uma análise do cluster calçadista de Birigui de acordo com o Modelo Diamante proposto por Porter (1999); b) a segunda área abrange tanto a estrutura formal do Cooperar para Competir em cada uma das turmas quanto o processo dinâmico do curso, seus momentos críticos e as estratégias pedagógicas adotadas a cada momento em vista dos desafios. Esta parte contextualiza o programa, apresenta sua estrutura e reflete a construção das bases de cooperação em sala de aula por uma perspectiva axiológica; c) a terceira área, por fim, é caracterizada pela pesquisa de campo, quando foram investigadas as vivências, experiências e impactos dos e nos participantes do ponto de vista subjetivo e como eles entenderam os efeitos em suas vidas profissional e pessoal. As entrevistas abertas foram realizadas com dois grupos de participantes, o Grupo Graduado e o Grupo Novo, a fim entender o desenvolvimento de ambos os grupos, os resultados alcançados pelo primeiro e o efeito da suspensão do programa no segundo. Todo o processo seguido durante a pesquisa permitiu que se chegasse a inúmeras conclusões, como o porquê do sucesso do programa Cooperar para Competir – o sucesso, neste caso, reside no desenho pedagógico que atende a dimensão axiológica, ou seja, não apenas se falou de cooperação, mas se produziu cooperação ao integrar competências, interesses e valores. O programa serviu, então, como um espaço filosófico e laboratorial. Assim, o conteúdo e a sequência seguidos também tem sua importância relativizada frente as relações e a construção de algo que transcende o caráter utilitarista ou funcionalista das disciplinas. As entrevistas individuais e em grupo mostraram que se reconhecerem como iguais foi um fator gerador de confiança entre os participantes, a qual também é expressa quando estes se abrem para compreenderem o modo como os outros atribuem significados para a relação de desconfiança e confiança e passam a estabelecer um sistema de significação comum. Além disso, a consciência de sua realidade e o reconhecimento de sua responsabilidade junto a si mesmo, à sua empresa, ao projeto desenvolvido no Cooperar para Competir e à comunidade de Birigui marcam, também, a mudança do esquema mental de sapateiro para empresário.

JML- Based formal development of a Java card application for managing medical appointments

Although formal methods can dramatically increase the quality of software systems, they have not widely been adopted in software industry. Many software companies have the perception that formal methods are not cost-effective cause they are plenty of mathematical symbols that are difficult for non-experts to assimilate. The Java Modelling Language (short for JML) Section 3.3 is an academic initiative towards the development of a common formal specification language for Java programs, and the implementation of tools to check program correctness. This master thesis work shows how JML based formal methods can be used to formally develop a privacy sensitive Java application. This is a smart card application for managing medical appointments. The application is named HealthCard. We follow the software development strategy introduced by João Pestana, presented in Section 3.4. Our work influenced the development of this strategy by providing hands-on insight on challenges related to development of a privacy sensitive application in Java. Pestana’s strategy is based on a three-step evolution strategy of software specifications, from informal ones, through semiformal ones, to JML formal specifications. We further prove that this strategy can be automated by implementing a tool that generates JML formal specifications from a welldefined subset of informal software specifications. Hence, our work proves that JML-based formal methods techniques are cost-effective, and that they can be made popular in software industry. Although formal methods are not popular in many software development companies, we endeavour to integrate formal methods to general software practices. We hope our work can contribute to a better acceptance of mathematical based formalisms and tools used by software engineers. The structure of this document is as follows. In Section 2, we describe the preliminaries of this thesis work. We make an introduction to the application for managing medical applications we have implemented. We also describe the technologies used in the development of the application. This section further illustrates the Java Card Remote Method Invocation communication model used in the medical application for the client and server applications. Section 3 introduces software correctness, including the design by contract and the concept of contract in JML. Section 4 presents the design structure of the application. Section 5 shows the implementation of the HealthCard. Section 6 describes how the HealthCard is verified and validated using JML formal methods tools. Section 7 includes some metrics of the HealthCard implementation and specification. Section 8 presents a short example of how a client-side of a smart card application can be implemented while respecting formal specifications. Section 9 describes a prototype tools to generate JML formal specifications from informal specifications automatically. Section 10 describes some challenges and main ideas came acrorss during the development of the HealthCard. The full formal specification and implementation of the HealthCard smart card application presented in this document can be reached at https://sourceforge.net/projects/healthcard/.

New method for determination of (E)resveratrol in wine based on microextraction using packed sorbent and ultra-performance liquid chromatography

An ultra-fast and improved analytical methodology based on microextraction by packed sorbent (MEPS) combined with ultra-performance LC (UPLC) was developed and validated for determination of (E)-resveratrol in wines. Important factors affecting the performance of MEPS such as the type of sorbent material (C2, C8, C18, SIL, and M1), number of extraction cycles, and sample volume were studied. The optimal conditions of MEPS extraction were obtained using C8 sorbent and small sample volumes (50–250mL) in one extraction cycle (extract–discard) and in a short time period (about 3 min for the entire sample preparation step). (E)-Resveratrol was eluted by 1 250mL of the mixture containing 95% methanol and 5% water, and the separation was carried out on a highstrength silica HSS T3 analytical column (100 mm 2.1 mm, 1.8mm particle size) using a binary mobile phase composed of aqueous 0.1% formic acid (eluent A) and methanol (eluent B) in the gradient elution mode (10 min of total analysis). The method was fully validated in terms of linearity, detection (LOD) and quantification (LOQ) limits, extraction yield, accuracy, and inter/intra-day precision, using a Madeira wine sample (ET) spiked with (E)-resveratrol at concentration levels ranging from 5 to 60mg/mL. Validation experiments revealed very good recovery rate of 9575.8% RSD, good linearity with r2 values 40.999 within the established concentration range, excellent repeatability (0.52%), and reproducibility (1.67%) values (expressed as RSD), thus demonstrating the robustness and accuracy of the MEPSC8/UPLC-photodiode array (PDA) method. The LOD of the method was 0.21mg/mL, whereas the LOQ was 0.68mg/mL. The validated methodology was applied to 30 commercial wines (24 red wines and six white wines) from different grape varieties, vintages, and regions. On the basis of the analytical validation, the MEPSC8/UPLC-PDA methodology shows to be an improved, sensitive, and ultra-fast approach for determination of (E)-resveratrol in wines with high resolving power within 6 min.

Development of a quality index method (QIM) sensory scheme and study of shelf-life of ice-stored blackspot seabream (Pagellus bogaraveo)

The aim of this work was to develop a quality index method (QIM) scheme for whole ice-boxed refrigerated blackspot seabream and to perform shelf-life evaluations, using sensory analysis, GR Torrymeter measurements and bacterial counts of specific spoilage organisms (SSO) during chilled storage. A QIM scheme based on a total of 30 demerit points was developed. Sensory, physical and microbiological data were integrated and used to determine the rejection point. Results indicated that the shelf-life of blackspot seabream is around 12-13 days. (C) 2011 Elsevier Ltd. All rights reserved.

A non-invasive method for silencing gene transcription in honeybees maintained under natural conditions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Pitiose cutânea equina de localização atípica tratada topicamente com solução de anfotericina B e DMSO

Background: Cutaneous lesions by Pythium insidiosum infection are commonly observed in horses, especially in those living at flooded environments. Equine pythiosis is characterized by the development of tumoral masses that are frequently located at distal limbs, ventral abdomen, thorax, breast and face. The lesions are usually granulomatous, serosanguineous and ulcerated, most often destroyed by self-mutilation due to the intense pruritus. The proposed treatment includes surgical excision followed by antifungal drugs administration, which can be done systemically or topically. Amphotericin B and dimethyl sulfoxide (DMSO) in association has been successfully used for cutaneous pythiosis topical treatment due to the DMSO property to carry any substance through plasmatic membranes.Case: The present report concerns a 12-year-old mixed breed gelding presenting with self-mutilation of a tumoral mass located at the left flank. The owners reported that the horse had initially presented a small wound that had evolved to a 20-cm in diameter mass in 4 weeks. Tissue samples were collected, processed and stained by the Gomori's methenamine silver (GMS) method. The histopathological analysis revealed Pythium insidiosum hyphae in a granulomatous tissue, especially located at peripheral region, where kunkers were present. Surgical excision of the mass followed by cauterization was indicated as initial treatment, and due to financial reasons, the owners elected only the topical antifungal therapy to control the fungus infection after surgery. Flunixin meglumine was also administrated for five days aiming the control of pain and inflammation. The wound was cleaned with povidone-iodine solution and rinsed with a solution containing, 50 mg, of amphotericin B in 10 mL of sterile water and 10 mL of DMSO. This procedure was carried Out twice a day. The wound healed fast due to an excellent centripetal epithelialization. and the horse was discharged after 64 days showing only 5% of the initial wound area. The owner reported by telephone the complete healing and hair growth 10 days after discharge.Discussion: Despite the atypical location of the tumoral lesion described at the present report, the history and clinical manifestations, especially the intense pruritus, showed similarity with other characteristic reports of equine cutaneous pythiosis. The diagnosis was confirmed by the histopathological examination showing hyphae structures, as described to be evidences of the presence of Pythium insidiosum in the tissue. The surgical procedure was the first step to provide remission of clinical signs, and one day after surgery the pruritus desapeared. After excision of the granulomatous tissue and cauterization, daily topical administration of amphotericin B associated with DMSO was effective in destroying the infectious agent, as observed by the excellent epithelization. A pink granulation tissue grew up providing an ideal surface for epithelial migration and the healing process progressed quickly. Centripetal epithelialization reduced the wound area until 3% of the initial area in 64 days of treatment, when the remaining wound was found almost completely healed and covered with hair. At the present report, the horse presenting pythiosis was only topically treated. The recommended therapy using amphotericin B and DMSO solution was effective, economically viable and low risk, considering that the systemic antifungal therapy usually suggested is expensive and extremely nephrotoxic. The atypical location of the lesion on the left flank shows that any anatomical region can be affected by the fungus, since the conditions for its development were present.

Instituições, agricultura familiar e crédito rural: avaliação de resultados do Pronaf B nos territórios rurais do Rio Grande do Norte

Broadly anchored on Institutionalist literature this dissertation seeks to answer: Why rural credit granted to farming families in Rio Grande do Norte, Pronaf group B, has shown positive results in some territories while in others the same results are insatisfactory? Considering formal rules are the same, then why such results are so distinguished? This research supports the fact that these results are a direct consequence of the quality of institutions defined as longstanding social rules established and built in social interactions. For institutions one understands; organizational structures, formal and non-formal rules, social trust, thinking behaviors and its evolution as well as routines. Using Pronaf Rural Credit as a background this study measures and compares results obtained in the rural areas of Seridó, Sertão do Apodi, Mato Grande, Assú-Mossoró, Trairi, Potengi and Alto Oeste. The dimensions of measurement considered were: economics, social and guarantee of transparency. The study considers a sample of 402 Group B farming families. It also elaborates a socio-economic profile of these families in the considered areas and underlines the main causes for defaulted loans, difficulties to improve family income and results of access to Pronaf B credit line, as well as it proposes solutions to surpass obstacles to improve the efficiency of this credit line

Reconfigurações industriais das regiões metropolitanas do Nordeste: uma análise a partir do emprego formal

Industrial development experienced by Brazil from the 1950s, changed the concentration of population in the country. The process of development of domestic industry, concentrated in urban areas, crowded growing portion of the population.The Southeast region during the first stage of industrialization driven by the state, with the implementation of Plan goals, captained the major industrial projects implemented in the period and became the main industrial center of the country.In the decade from 1960 to 1980 the state action was marked by numerous regional development projects, softening the industrial concentration and Brazilian investment redirected to the Northeast.The second National Development Plan implemented in the 1970s led to major investments Northeast.This period marked the widespread urban growth and institutionalization of the first metropolitan areas in Brazil.The change of this developmental process is altered with the fiscal and financial crisis of the state in the 1980s and 1990s and spending cuts aimed at national development, reorienting the economy to liberal policies of economic liberalization and reduction of activity in the economy.Industrial policy was relegated to local development plans from the 1990s to the federating units fitting the wide use of tax incentives, the "war tax" to the continued industrialization process.In this context of the national economy work seeks to analyze the industrial setting in the metropolitan areas of Fortaleza, Recife and Salvador between 1995 and 2010.Although the metropolitan areas of Fortaleza, Recife and Salvador are the main urban centers of the Northeast, responsible for the advancement of industrial development, reconfigurations occurred between 1995 and 2010 by changing the level of industrial specialization built by regional division of labor in these regions.The work will be carried out by the method of descriptive analysis of the literature review on regional and urban development.Constitute quantitative method as the secondary data analysis of formal employment from the Annual Social Information (RAIS) Ministry of Labour and Employment (MTE).Using data RAIS / MTE analyzes the industrial specialization index using the Locational Quotient (LQ).Thus, it is assumed as a parameter analysis QL> 1, when the region has become specialized in a particular sector or QL <1, when the region does not have expertise in industrial sector analyzed.The conclusion of study indicates that there was in these metropolitan areas maintained the same bias hub.Fiscal policies, the states, was not successful in diversifying the productive structure and the Northeast region itself.This result is demonstrated by the need and dependence on state investments in the region to promote development.Industrial policies of recent years have been positive to meet the objectives of employment generation, but there must be specific policies for better diversification of production, in addition to integrating the economy of the Northeast sector and regionally

A new method for inoculation of fruit with Guignardia citricarpa, the causal agent of citrus black spot

Citrus black spot (CBS) is a fungal disease, caused by Guignardia citricarpa, that has a high economic impact on citrus. Although G. citricarpa has been associated with black spot of citrus, an adequate pathogenicity test is still not available. Thus, our objective was to develop and evaluate a simple, safe, and practical pathogenicity test. We used fruits from Pera-Rio and Valencia sweet orange trees from two different orchards, located in the State of São Paulo, Brazil. Inoculation was performed by placing six disks colonized by G. citricarpa, onto the peel of healthy fruits, previously bagged. In the Pera-Rio sweet orange grove, initial symptoms of the false melanose type resulting from the inoculations were observed 55 days after inoculation (dai). In the Valencia grove, initial symptoms also of the false melanose type resulting from the inoculations occurred 73 dai. A total of 92.8% and 86.6% of the Pera Rio and Valencia fruits inoculated, respectively, showed symptoms of CBS. Citrus black spot symptoms were not observed in any of the control fruits.

Mortality of Bemisia tabaci biotype B (sternorrhyncha: aleyrodidae) adults by aliphatic and aromatic synthetic sucrose esters

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Otimização de forma aplicando B-splines sob critério integral de tensões

This work proposes a computational methodology to solve problems of optimization in structural design. The application develops, implements and integrates methods for structural analysis, geometric modeling, design sensitivity analysis and optimization. So, the optimum design problem is particularized for plane stress case, with the objective to minimize the structural mass subject to a stress criterion. Notice that, these constraints must be evaluated at a series of discrete points, whose distribution should be dense enough in order to minimize the chance of any significant constraint violation between specified points. Therefore, the local stress constraints are transformed into a global stress measure reducing the computational cost in deriving the optimal shape design. The problem is approximated by Finite Element Method using Lagrangian triangular elements with six nodes, and use a automatic mesh generation with a mesh quality criterion of geometric element. The geometric modeling, i.e., the contour is defined by parametric curves of type B-splines, these curves hold suitable characteristics to implement the Shape Optimization Method, that uses the key points like design variables to determine the solution of minimum problem. A reliable tool for design sensitivity analysis is a prerequisite for performing interactive structural design, synthesis and optimization. General expressions for design sensitivity analysis are derived with respect to key points of B-splines. The method of design sensitivity analysis used is the adjoin approach and the analytical method. The formulation of the optimization problem applies the Augmented Lagrangian Method, which convert an optimization problem constrained problem in an unconstrained. The solution of the Augmented Lagrangian function is achieved by determining the analysis of sensitivity. Therefore, the optimization problem reduces to the solution of a sequence of problems with lateral limits constraints, which is solved by the Memoryless Quasi-Newton Method It is demonstrated by several examples that this new approach of analytical design sensitivity analysis of integrated shape design optimization with a global stress criterion purpose is computationally efficient

The influence of preparation method of OC1OC6-PPV films on the photo-oxidation process

Poly(p-phenylene vinylene) (PPV) derivatives are well known for their applications in polymer light emitting diodes (PLEDs). PPV derivatives are highly susceptible to photo-oxidation though, which is mainly caused by the scission of the vinyl double bond on the polymer backbone. In this work, we show that Langmuir-Blodgett (LB) films are less degraded than cast films of a PPV derivative (OC1OC6-PPV). Both films had similar thickness (similar to 50 nm) to allow for a more realistic comparison. Degradation was monitored with UV-vis and FTIR spectroscopies. The results indicated that cast films were completely degraded in ca. 400 min, while LB took longer time, i.e. about four times the values for the cast films. The differences can be attributed to the more compact morphology in the LB than in the cast films. With a compact morphology the diffusion of oxygen in the LB film is hampered and this causes a delay in the degradation process. (c) 2006 Elsevier Ltd. All rights reserved.