The synthesis of novel nitroxides and their application as small-molecule antioxidants and profluorescent probes for oxidative stress

The detection and potential treatment of oxidative stress in biological systems has been explored using isoindoline-based nitroxide radicals. A novel tetraethyl-fluorescein nitroxide was synthesised for its use as a profluorescent probe for redox processes in biological systems. This tetraethyl system, as well as a tetramethyl-fluorescein nitroxide, were shown to be sensitive and selective probes for superoxide in vitro. The redox environment of cellular systems was also explored using the tetramethylfluorescein species based on its reduction to the hydroxylamine. Flow cytometry was employed to assess the extent of nitroxide reduction, reflecting the overall cellular redox environment. Treatment of normal fibroblasts with rotenone and 2-deoxyglucose resulted in an oxidising cellular environment as shown by the lack of reduction of the fluorescein-nitroxide system. Assessment of the tetraethyl-fluorescein nitroxide system in the same way demonstrated its enhanced resistance to reduction and offers the potential to detect and image biologically relevant reactive oxygen species directly. Importantly, these profluorescent nitroxide compounds were shown to be more effective than the more widely used and commercially available probes for reactive oxygen species such as 2’,7’-dichlorodihydrofluorescein diacetate. Fluorescence imaging of the tetramethyl-fluorescein nitroxide and a number of other rhodamine-nitroxide derivatives was undertaken, revealing the differential cellular localisation of these systems and thus their potential for the detection of redox changes in specific cellular compartments. As well as developing novel methods for the detection of oxidative stress, a number of novel isoindoline nitroxides were synthesised for their potential application as small-molecule antioxidants. These compounds incorporated known pharmacophores into the isoindoline-nitroxide structure in an attempt to increase their efficacy in biological systems. A primary and a secondary amine nitroxide were synthesised which incorporated the phenethylamine backbone of the sympathomimetic amine class of drugs. Initial assessment of the novel primary amine derivative indicated a protective effect comparable to that of 5-carboxy-1,1,3,3- tetramethylisoindolin-2-yloxyl. Methoxy-substituted nitroxides were also synthesised as potential antioxidants for their structural similarity to some amphetamine type stimulants. A copper-catalysed methodology provided access to both the mono- and di-substituted methoxy-nitroxides. Deprotection of the ethers in these compounds using boron tribromide successfully produced a phenolnitroxide, however the catechol moiety in the disubstituted derivative appeared to undergo reaction with the nitroxide to produce quinone-like degradation products. A novel fluoran-nitroxide was also synthesised from the methoxy-substituted nitroxide, providing a pH-sensitive spin probe. An amino-acid precursor containing a nitroxide moiety was also synthesised for its application as a dual-action antioxidant. N-Acetyl protection of the nitroxide radical was necessary prior to the Erlenmeyer reaction with N-acetyl glycine. Hydrolysis and reduction of the azlactone intermediate produced a novel amino acid precursor with significant potential as an effective antioxidant.

Australian consumers' attitudes about sports sponsorship during an economic downturn

This paper provides an overview of the prevailing attitudes held by Australian residents as they relate to sports sponsorship during a global financial downturn. A survey of 1,158 Australians assessed changes in attitudes from 2008 to 2009; then it addressed issues specific to the economic conditions of 2009. In general, Australians view sports sponsorship favourably.

The pitfalls of publicizing ethics research

What happens to our research once it hits the popular media? Do marketers know how to promote our research in a way that is understandable and complete, while still capturing an audience? This case study follows the dissemination of the results of a consumer ethics study via a single press release, along with the resulting media coverage, interviews and audience comments. Perhaps in their quest for a touch of controversy, the story picked up by the popular press was not the one intended by the authors. If getting the public story right is important, marketing academics need to spend as much time carefully crafting their press releases as they do writing journal manuscripts – they may not be able to rely on the ethics of media sub-editors who choose controversial headlines.

Responses to 2008 Apology : Digital story collection

On 13 February 2008 Prime Minister Kevin Rudd made an apology to Australia’s Indigenous People on behalf of the Parliament of Australia. The State Library of Queensland, with assistance from Queensland University of Technology and Queensland’s Aboriginal and Torres Strait Islander communities, captured responses to this historic event in a collection of digital stories. Stories were created with: Tiga Bayles; Jeremy Robertson; Natalie Alberts; Sam Wagan Watson Jr; Nadine McDonald-Dowd; Anna Bligh; and Quentin Bryce.

The international search for ethics norms : which consumer behaviors do consumers consider (un)acceptable?

Purpose: Businesses cannot rely on their customers to always do the right thing. To help researchers and service providers better understand the dark (and light) side of customer behavior, this study aims to aggregate and investigate perceptions of consumer ethics from young consumers on five continents. The study seeks to present a profile of consumer behavioral norms, how ethical inclinations have evolved over time, and country differences. ---------- Design/methodology/approach: Data were collected from ten countries across five continents between 1997 and 2007. A self-administered questionnaire containing 14 consumer scenarios asked respondents to rate acceptability of questionable consumer actions. ---------- Findings: Overall, consumers found four of the 14 questionable consumer actions acceptable. Illegal activities were mostly viewed as unethical, while some legal actions that were against company policy were viewed less harshly. Differences across continents emerged, with Europeans being the least critical, while Asians and Africans shared duties as most critical of consumer actions. Over time, consumers have become less tolerant of questionable behaviors. ---------- Practical implications: Service providers should use the findings of this study to better understand the service customer. Knowing what customers in general believe is ethical or unethical can help service designers focus on the aspects of the technology or design most vulnerable to customer deviance. ---------- Multinationals already know they must adapt their business practices to the market in which they are operating, but they must also adapt their expectations as to the behavior of the corresponding consumer base. Originality/value: This investigation into consumer ethics helps businesses understand what their customer base believes is the right thing in their role as customer. This is a large-scale study of consumer ethics including 3,739 respondents on five continents offering an evolving view of the ethical inclinations of young consumers.

Attitudes towards consumer transgressions in the marketplace

A sample of 815 adults drawn from the general American population provided their perception of the appropriateness of 12 questionable consumer actions in the marketplace. The scenarios investigated ranged from illegal actions such as inflating one’s losses when filing an insurance claim to actions that while not illegal, may raise questions of ethics. The 12 scenarios exhibited a wide range of mean responses on the six-point scale thereby supporting an often stated premise that consumer ethics is situational in nature. An array of commonly employed demographic questions was also included on the Internet-based survey, and differences of opinion were documented across the various demographic segments.

Can proteoglycan change in articular cartilage be detected by ultrasound evaluation?

This paper assesses the capacity of high-frequency ultrasonic waves for detecting changes in the proteoglycan (PG) content of articular cartilage. 50 cartilage-on-bone samples were exposed to ultrasonic waves via an ultrasound transducer at a frequency of 20MHz. Histology and ImageJ processing were conducted to determine the PG content of the specimen. The ratios of the reflected signals from both the surface and the osteochondral junction (OCJ) were determined from the experimental data. The initial results show an inconsistency in the capacity of ultrasound to distinguish samples with severe proteoglycan loss (i.e. >90% PG loss) from the normal intact sample. This lack of clear distinction was also demonstrated at for samples with less than 60% depletion, while there is a clear differentiation between the normal intact sample and those with 55-70% PG loss.

Age and gender differences in ambulance utilisation in Queensland

Introduction Queensland has the highest ambulance utilisation (150 per 1000 population) in Australia and growing 4.4% annually. However, the impact of gender and age on utilisation is unknown. Methods & Materials Data on ambulance utilisation from Queensland Ambulance Service for the period 2002-2009 were analysed. Results Between 2002 and 2009, the number of ambulance patients per 1000 population increased overall by 17% (females) and 18% (males). The utilisation rate remained highest among the elderly but grew differently across age groups. For females, the rates were 55% (0-14yo), 73% (15-29yo), 38% (30-44yo), 22% (45-59yo), -9% (60-74yo) and -6% (75,+ yo); for males they were 48%, 59%, 38%, 17%, -13% and -2% respectively. Within the same age groups and period, the population adjusted number of males per 100 females (M:F ratio) changed from 134 to 128 (-5% growth), 98 to 91 (-8%), 101 to 100 (-0.4%), 115 to 111 (-3%), 114 to 108 (-5%) and 106 to 111 (4%). Conclusion Understanding the impact of patients’ demographic profiles on service utilisation and broader effects on the emergency health system is imperative for policy-making, demand management, designing public health campaigns and health promotions. Gender and age characteristics of ambulance users in Queensland appear to be changing most noticeably in the youngest and oldest groups. Physical and mental health, attitudinal, lifestyle, parenting, financial and socio-cultural reasons may account for these trends, but little evidence exists. A theoretical framework will be discussed to contextualise the findings.

Design Led Innovation : exploring the synthesis of needs, technologies and business models

The term Design is used to describe a wide range of activities. Like the term innovation, it is often used to describe both an activity and an outcome. Many products and services are often described as being designed, as they describe a conscious process of linking form and function. Alternatively, the many and varied processes of design are often used to describe a cost centre of an organisation to demonstrate a particular competency. However design is often not used to describe the ‘value’ it provides to an organisation and more importantly the ‘value’ it provides to both existing and future customers. Design Led Innovation bridges this gap. Design Led Innovation is a process of creating a sustainable competitive advantage, by radically changing the customer value proposition. A conceptual model has been developed to assist organisations apply and embed design in a company’s vision, strategy, culture, leadership and development processes.

2-(4-Aminophenyl)-1-phenyldiazenium 2,4,6-trinitrophenolate

In the structure of the title salt, C12H12N3+ C6H2N3O7-, the diazenyl group of the 4-(phenyldiazenyl)aniline molecule is protonated and forms a hydrogen bond with the phenolate O acceptor of the picrate anion. Structure extension occurs through two symmetrical inter-ion three-centre amine N---H...O,O'(nitro) hydrogen-bonding associations [graph set R2/1(4)] giving a convoluted two-dimensional network structure.

Do programs to improve business performance in small and medium manufacturing enterprise improve opportunity recognition?

Increasing awareness of the benefits of stimulating entrepreneurial behaviour in small and medium enterprises has fostered strong interest in innovation programs. Recently many western countries have invested in design innovation for better firm performance. This research presents some early findings from a study of companies which participated in an holistic approach to design innovation, where the outcomes include better business performance and better market positioning in global markets. Preliminary findings from in-depth semi-structured interviews indicate the importance of firm openness to new ways of working and developing new processes of strategic entrepreneurship. Implications for theory and practice are discussed.

Copyright future copyright freedom

If copyright law does not liberate us from restrictions on the dissemination of knowledge, if it does not encourage expressive freedom, what is its purpose? This volume offers the thinking and suggestions of some of the finest minds grappling with the future of copyright regulation. The Copyright Future Copyright Freedom conference held in 2009 at Old Parliament House Canberra brought together Lawrence Lessig, Julie Cohen, Leslie Zines, Adrian Sterling, Sam Ricketson, Graham Greenleaf, Anne Fitzgerald, Susy Frankel, John Gilchrist, Michael Kirby and others to share the rich fruits of their experience and analysis. Zines, Sterling and Gilchrist outline their roles in the genesis and early growth of Australian copyright legislation, enriching the knowledge of anyone asking urgent questions about the future of information regulation.

Real-time volume estimation of a dragline payload

This paper presents a method for measuring the in-bucket payload volume on a dragline excavator for the purpose of estimating the material's bulk density in real-time. Knowledge of the payload's bulk density can provide feedback to mine planning and scheduling to improve blasting and therefore provide a more uniform bulk density across the excavation site. This allows a single optimal bucket size to be used for maximum overburden removal per dig and in turn reduce costs and emissions in dragline operation and maintenance. The proposed solution uses a range bearing laser to locate and scan full buckets between the lift and dump stages of the dragline cycle. The bucket is segmented from the scene using cluster analysis, and the pose of the bucket is calculated using the Iterative Closest Point (ICP) algorithm. Payload points are identified using a known model and subsequently converted into a height grid for volume estimation. Results from both scaled and full scale implementations show that this method can achieve an accuracy of above 95%.

Designing disruption : linking participatory design and design thinking in technology orientated industries

A vast proportion of companies nowadays are looking to design and are focusing on the end users as a means of driving new projects. However still many companies are drawn to technological improvements which drive innovation within their industry context. The Australian livestock industry is no different. To date the adoption of new products and services within the livestock industry has been documented as being quite slow. This paper investigates how disruptive innovation should be a priority for these technologically focused companies and demonstrates how the use of design led innovation can bring about a higher quality engagement between end user and company alike. A case study linking participatory design and design thinking is presented. Within this, a conceptual model of presenting future scenarios to internal and external stakeholders is applied to the livestock industry; assisting companies to apply strategy, culture and advancement in meaningful product offerings to consumers.

Teaching design led innovation : the future of industrial design

The profession of industrial design is changing and with that so must industrial design education. The newly derived final year industrial design unit at the Queensland University of Technology (QUT) was created to initiate such a change. A designers’ role in industry is no longer limited to the invention process surrounding human cantered design but has now evolved into design led innovation. This paper reflects upon the teaching methods employed over a two-year period and improvements made over that time to the unit. The student project outcome is to produce a design solution that integrates an underlying novel technology into a new product and or service, with business strategies and manufacturing details being fully integrated into the design process. It is this integrated approach to industrial design teaching that will foster a more grounded and resourceful future designer.