The effect of siesta in parameters of cardiac structure and in interpretation of ambulatory arterial blood pressure monitoring

OBJECTIVE: To evaluate the influence of the siesta in ambulatory blood pressure (BP) monitoring and in cardiac structure parameters. METHODS: 1940 ambulatory arterial blood pressure monitoring tests were analyzed (Spacelabs 90207, 15/15 minutes from 7:00 to 22:00 hours and 20/20 minutes from 22:01 to 6.59hours) and 21% of the records indicated that the person had taken a siesta (263 woman, 52±14 years). The average duration of the siesta was 118±58 minutes. RESULTS: (average ± standard deviation) The average of systolic/diastolic pressures during wakefulness, including the napping period, was less than the average for the period not including the siesta (138±16/85±11 vs 139±16/86±11 mmHg, p<0.05); 2) pressure loads during wakefulness including the siesta, were less than those observed without the siesta); 3) the averages of nocturnal sleep blood pressures were similar to those of the siesta, 4) nocturnal sleep pressure drops were similar to those in the siesta including wakefulness with and without the siesta; 5) the averages of BP in men were higher (p<0.05) during wakefulness with and without the siesta, during the siesta and nocturnal sleep in relation to the average obtained in women; 6) patients with a reduction of 0- 5% during the siesta had thickening of the interventricular septum and a larger posterior wall than those with a reduction during the siesta >5%. CONCLUSION: The siesta influenced the heart structure parameters and from a statistical point of view the average of systolic and diastolic pressures and the respective pressure loads of the wakeful period.

End-systolic pressure-diameter relation of the left ventricle during transient and sustained elevations of blood pressure

OBJECTIVE: To assess the effect of transient and sustained variations in cardiac load on the values of the end-systolic pressure-diameter relation (ESPDR) of the left ventricle. METHODS: We studied 13 dogs under general anesthesia and autonomic blockade. Variations of cardiac loads were done by elevation of blood pressure by mechanical constriction of the aorta. Two protocols were used in each animal: gradual peaking and decreasing pressure variation, the "transient arterial hypertension protocol" (TAH), and a quick and 10 min sustained elevation, the "sustained arterial hypertension protocol"(SAH). Then, we compared the ESDR in these two situations. RESULTS: Acute elevation of arterial pressure, being it "transitory" or "sustained", did not alter the heart frequency and increased similarly the preload and after load. However, they acted differently in end systolic pressure-diameter relation. It was greater in the SAH than TAH protocol, 21.0±7.3mmHg/mm vs. 9.2±1.2mmHg/mm (p<0.05). CONCLUSION: The left ventricular ESPDR values determined during sustained pressure elevations were higher than those found during transient pressure elevations. The time-dependent activation of myocardial contractility associated with the Frank-Starling mechanism is the major factor in inotropic stimulation during sustained elevations of blood pressure, determining an increase in the ESPDR values.

Echocardiographic assessment of the different left ventricular geometric patterns in hypertensive patients

OBJECTIVE: To identiy left ventricular geometric patterns in hypertensive patients on echocardiography, and to correlate those patterns with casual blood pressure measurements and with the parameters obtained on a 24-hour ambulatory blood pressure monitoring. METHODS: We studied sixty hypertensive patients, grouped according to the Joint National Committee stages of hypertension.. Using the single- and two-dimensional Doppler Echocardiography, we analyzed the left ventricular mass and the geometric patterns through the correlation of left ventricular mass index and relative wall thickness. On ambulatory blood pressure monitoring we assessed the means and pressure loads in the different geometric patterns detected on echocardiography RESULTS: We identified three left ventricular geometric patterns: 1) concentric hypertrophy, in 25% of the patients; 2) concentric remodeling, in 25%; and 3) normal geometry, in 50%. Casual systolic blood pressure was higher in the group with concentric hypertrophy than in the other groups (p=0.001). Mean systolic pressure in the 24h, daytime and nighttime periods was also higher in patients with concentric hypertrophy, as compared to the other groups (p=0.003, p=0.004 and p=0.007). Daytime systolic load and nighttime diastolic load were higher in patients with concentric hypertrophy ( p=0.004 and p=0.01, respectively). CONCLUSIONS: Left ventricular geometric patterns show significant correlation with casual systolic blood pressure, and with means and pressure loads on ambulatory blood pressure monitoring.

Feasibility of internally stiffened thin-walled beams for industrial applications

Several types of internally reinforced thin-walled beams are subjected to a feasibility evaluation of its mechanical behavior for industrial applications. The adapting of already existing efficient sandwich geometries to hollow-box beams of larger dimensions may reveal promising results. Novel types of sandwich beams under bending and torsion uncoupled loadings are studied in terms of stiffness behavior in static analysis. For the analysis of the solutions, the models are built using the Finite Element Method (FEM) software ANSYS Mechanical APDL. The feasibility of the novel beams was determined by the comparison of the stiffness behavior of the novel hollow-box beams with conventional hollow-box beams. An efficiency parameter was defined in order to determine the feasibility. It is found that the novel geometries represent an excellent improvement under bending loadings, better than under torsion loadings. Nevertheless, for bending and torsion combined loadings, if bending loads are predominant, the beams can still be interesting for some applications, in particular those with mobile parts.

Differences in muscular activity between obese and non-obese workers during manual lifting

The prevalence of obesity is increasing throughout the workforce. Manual lifting tasks are common and can produce significant muscle loading. This study compared muscular activity between obese and non-obese subjects, using surface Electromyography (EMG), during manual lifting. Six different lifting tasks (with 5, 10 and 15 kg loads in free and constrained styles) were performed by 14 participants with different obesity levels. EMG data normalization was based on the percentage of Maximum Contraction during each Task (MCT). Muscle Activation Times (AT) before each task were also evaluated. The study suggests that obesity can increase MCT and delay muscle AT. These findings reinforce the need to develop further studies focused on obesity as a risk factor for the development of musculoskeletal disorders.

Immune cell changes in swimmers : response to acute exercise and training

O treino competitivo envolve exercício intenso e prolongado, capaz de modular o número e actividade das células imunitárias. Quando demasiado exigente poderá induzir fadiga e aumentar a susceptibilidade a doenças. Esta dissertação apresenta três estudos desenvolvidos no âmbito da Imunologia do Exercício, considerando a análise da resposta celular imunitária sistémica aguda e crónica ao exercício aplicada em situações reais do treino competitivo de natação, controlando factores passíveis de influenciar esta resposta. Pretendeu-se avaliar a resposta imunitária a uma sessão de treino prolongada e intensa, durante as 24h de recuperação (Estudo 1) e a uma época de treino com sete meses (Estudo 2), e estudar a influência de um macrociclo de treino de quatro meses sobre a resposta imunitária à mesma sessão de treino e período de recuperação (Estudo 3), controlando sexo, fases do ciclo menstrual, maturidade, escalão, especialidade, performance, cargas de treino e sintomas respiratórios superiores (URS). A sessão de treino induziu a diminuição da vigilância imunitária adquirida imediatamente e, pelo menos nas 2h seguintes. Juvenis e seniores recuperaram totalmente 24h depois, mas não os juniores, reforçando a ideia da existência de uma janela aberta para a infecção após exercícios prolongados e intensos e sugerindo uma recuperação menos eficiente para os juniores. No período de treino mais intenso da época observou-se uma imunodepressão e maior prevalência de URS. No final da época, a imunidade inata diminuiu aparentando maior sensibilidade aos efeitos cumulativos da carga de treino, enquanto a imunidade adquirida parece ter recuperado após o taper. O macrociclo de treino atenuou a resposta imunitária à sessão de treino e aumentou o período de janela aberta às infecções (efeitos mais acentuados nos adolescentes). Os resultados evidenciam a importância de controlar alterações imunitárias durante a época competitiva, especialmente em períodos de treino intenso e quando se realizam sessões de treino intensas consecutivas com recuperações inferiores a 24h.

Analysis of energy management in GMIT

Energy management is the process of monitoring, controlling and conserving energy in a building or organisation. The main reasons for this are for cost purposes and benefit to the environment. Through various techniques and solutions for lighting, heating, office equipment, the building fabric etc along with a change in people’s attitudes there can be a substantial saving in the amount spent on energy. A good example o f energy waste in GMIT is the lighting situation in the library. All the lights are switched on all day on even in places where that is adequate daylighting, which is a big waste o f energy. Also the lights for book shelves are left on. Surely all these books won’t be searched for all at the one time. It would make much more sense to have local switches that the users can control when they are searching for a particular book. Heating controls for the older parts o f the college are badly needed. A room like 834 needs a TRV to prevent it from overheating as temperatures often reach the high twenties due to the heat from the radiators, computers, solar gains and heat from users o f the room. Also in the old part o f the college it is missing vital insulation, along with not being air tight due to the era when it was built. Pumped bonded bead insulation and sealant around services and gaps can greatly improve the thermal performance o f the building and help achieve a higher BER cert. GMIT should also look at the possibility o f installing a CHP plant to meet the base heating loads. It would meet the requirement o f running 4500 hours a year and would receive some financial support from the Accelerated Capital Allowance. I f people’s attitudes are changed through energy awareness campaigns and a few changes made for more energy efficient equipment, substantial savings can be made in the energy expenditure.

Ambulatory Blood Pressure Monitoring: Five Decades of More Light and Less Shadows

Abstract Casual blood pressure measurements have been extensively questioned over the last five decades. A significant percentage of patients have different blood pressure readings when examined in the office or outside it. For this reason, a change in the paradigm of the best manner to assess blood pressure has been observed. The method that has been most widely used is the Ambulatory Blood Pressure Monitoring - ABPM. The method allows recording blood pressure measures in 24 hours and evaluating various parameters such as mean BP, pressure loads, areas under the curve, variations between daytime and nighttime, pulse pressure variability etc. Blood pressure measurements obtained by ABPM are better correlated, for example, with the risks of hypertension. The main indications for ABPM are: suspected white coat hypertension and masked hypertension, evaluation of the efficacy of the antihypertensive therapy in 24 hours, and evaluation of symptoms. There is increasing evidence that the use of ABPM has contributed to the assessment of blood pressure behaviors, establishment of diagnoses, prognosis and the efficacy of antihypertensive therapy. There is no doubt that the study of 24-hour blood pressure behavior and its variations by ABPM has brought more light and less darkness to the field, which justifies the title of this review.

Fabricació de Lents Zonals de Fresnel per aplicació als raigs X tous

Estudi elaborat a partir d’una estada al Paul Scherrer Institut del Maig a l’Octubre del 2006 amb l’ajuda i supervisió dels Dr. Konstantins Jefimovs i Dr. Christian David. Focalitzar raigs X tous és una necessitat essencial per al microanàlisis, la microscopia, i fer imatges en moltes Instal·lacions de Radiació Sincrotró. Les Lents Zonals de Fresnel (FZP, de la denominació anglesa “Fresnel Zone Plates”) han demostrat donar uns punts focals amb una resolució espacial destacada i una baixa il·luminació de fons. Tanmateix, la fabricació de FZP és complexa i no totalment reproduïble. A més a més, el temps de vida de les FZP és força curt, ja que estant situades sobre membranes de nitrur de silici molt fines i altament absorbents. Per tant, hem fet esforços per implementar FZP de silici, que s’espera que siguin més resistents. L’element està fet d’una oblia de cristall de silici poc absorbent, i no presenta cap interfase entre materials. Així doncs, aquestes lents són especialment adequades per a aguantar les extremes càrregues de radiació de les fonts de raigs X més brillants. Particularment, això és molt important per a les aplicacions a les pròximes generacions de fonts de raigs X, com els Làsers d’Electrons Lliures (FEL, de la denominació anglesa “Free Electron Laser”). El silici també garanteix que no hi hagi cap banda d’absorció en el rang d’energies de la finestra de l’aigua (200-520 eV), fent aquestes lents ideals per a fer imatges de mostres biològiques. En aquest informe, hi ha una descripció detallada de tots els passos involucrats en la fabricació de les Lents Zonals de Fresnel de silici. En resum, les estructures de FZP es modelen sobre una resina utilitzant litografia per feix d’electrons i llavors el patró es transmet al silici mitjançant un gravat d’ions reactius (RIE, de la denominació anglesa ‘Reactive Ion Etching’) utilitzant una fina (20 nm) màscara de Crintermitja. Les membranes de silici es poden aprimar després de la fabricació de les estructures per a garantir una transmissió suficient fins i tot a baixes energies. Aquest informe també inclou l’anàlisi i la discussió d’alguns experiments preliminars per avaluar el rendiment de les Si FZPs fets a la línia de llum PolLux del Swiss Ligth Source amb l’ajuda dels Dr. Jörg Raabe i Dr. George Tzvetkov.

Inbreeding avoidance through kin recognition: choosy females boost male dispersal.

Inbreeding avoidance is predicted to induce sex biases in dispersal. But which sex should disperse? In polygynous species, females pay higher costs to inbreeding and thus might be expected to disperse more, but empirical evidence consistently reveals male biases. Here, we show that theoretical expectations change drastically if females are allowed to avoid inbreeding via kin recognition. At high inbreeding loads, females should prefer immigrants over residents, thereby boosting male dispersal. At lower inbreeding loads, by contrast, inclusive fitness benefits should induce females to prefer relatives, thereby promoting male philopatry. This result points to disruptive effects of sexual selection. The inbreeding load that females are ready to accept is surprisingly high. In absence of search costs, females should prefer related partners as long as delta<r/(1+r) where r is relatedness and delta is the fecundity loss relative to an outbred mating. This amounts to fitness losses up to one-fifth for a half-sib mating and one-third for a full-sib mating, which lie in the upper range of inbreeding depression values currently reported in natural populations. The observation of active inbreeding avoidance in a polygynous species thus suggests that inbreeding depression exceeds this threshold in the species under scrutiny or that inbred matings at least partly forfeit other mating opportunities for males. Our model also shows that female choosiness should decline rapidly with search costs, stemming from, for example, reproductive delays. Species under strong time constraints on reproduction should thus be tolerant of inbreeding.

Comportamiento tribomecánico de sistemas de sustrato: recubrimiento duros

En aplicaciones como la conformación en frío, donde los metales duros recubiertos con películas de naturaleza cerámica son ampliamente empleados, la existencia de un contacto mecánico repetitivo induce tensiones Hertzianas y origina el fallo por fatiga. En este trabajo, se investigan diversos recubrimientos cerámicos depositados por deposición física desde fase vapor sobre calidades diferentes de metal duro y un acero rápido pulvimetalúrgico para evaluar sus respectivas respuesta al contacto y comportamiento a fatiga. El trabajo experimental incluye la caracterización de los sistemas mediante ensayos de rayado y nanoindentación y la evaluación de las curvas tensión-deformación de indentación esférica de los sustratos, tanto desnudos como recubiertos, poniendo especial atención en determinar las tensiones de contacto críticas asociadas a la deformación plástica y a la aparición de grietas circulares en la superficie recubierta. A este estudio, le siguen numerosos ensayos a fatiga a cargas inferiores a aquéllas identificadas como críticas bajo carga monotónica y para un número de ciclos comprendido entre 1.000 y 1.000.000 de ciclos. Los resultados experimentales indican que las películas cerámicas no parecen desempeñar un papel relevante en la aparición de la cedencia plástica, siendo la deformación plástica global controlada por la deformación del sustrato. No obstante, para tensiones elevadas de indentación durante el régimen plástico, existe la aparición de grietas circulares en los recubrimientos cerámicos. Además, la aparición de las mismas es sensible a la fatiga por contacto. Este análisis mecánico se complementa con una inspección detallada del daño generado en profundidad y superficie.

Safety and immunogenicity of the M72/AS01 candidate tuberculosis vaccine in HIV-infected adults on combination antiretroviral therapy: a phase I/II, randomized trial.

OBJECTIVE: Tuberculosis (TB) is highly prevalent among HIV-infected people, including those receiving combination antiretroviral therapy (cART), necessitating a well tolerated and efficacious TB vaccine for these populations. We evaluated the safety and immunogenicity of the candidate TB vaccine M72/AS01 in adults with well controlled HIV infection on cART. DESIGN: A randomized, observer-blind, controlled trial (NCT00707967). METHODS: HIV-infected adults on cART in Switzerland were randomized 3 : 1 : 1 to receive two doses, 1 month apart, of M72/AS01, AS01 or 0.9% physiological saline (N = 22, N = 8 and N = 7, respectively) and were followed up to 6 months postdose 2 (D210). Individuals with CD4⁺ cell counts below 200 cells/μl were excluded. Adverse events (AEs) including HIV-specific and laboratory safety parameters were recorded. Cell-mediated (ICS) and humoral (ELISA) responses were evaluated before vaccination, 1 month after each dose (D30, D60) and D210. RESULTS: Thirty-seven individuals [interquartile range (IQR) CD4⁺ cell counts at screening: 438-872 cells/μl; undetectable HIV-1 viremia] were enrolled; 73% of individuals reported previous BCG vaccination, 97.3% tested negative for the QuantiFERON-TB assay. For M72/AS01 recipients, no vaccine-related serious AEs or cART-regimen adjustments were recorded, and there were no clinically relevant effects on laboratory safety parameters, HIV-1 viral loads or CD4⁺ cell counts. M72/AS01 was immunogenic, inducing persistent and polyfunctional M72-specific CD4⁺ T-cell responses [medians 0.70% (IQR 0.37-1.07) at D60] and 0.42% (0.24-0.61) at D210, predominantly CD40L⁺IL-2⁺TNF-α⁺, CD40L⁺IL-2⁺ and CD40L⁺IL-2⁺TNF-α⁺IFN-γ⁺]. All M72/AS01 vaccines were seropositive for anti-M72 IgG after second vaccination until study end. CONCLUSION: M72/AS01 was clinically well tolerated and immunogenic in this population, supporting further clinical evaluation in HIV-infected individuals in TB-endemic settings.

Caracteritació de models funcionals d'àmfores romanes mitjançant Finite Element Analysis

Projecte de recerca elaborat a partir d’una estada al Laboratory of Archaeometry del National Centre of Scientific Research “Demokritos” d’Atenes, Grècia, entre juny i setembre 2006. Aquest estudi s’emmarca dins d’un context més ampli d’estudi del canvi tecnològic que es documenta en la producció d’àmfores de tipologia romana durant els segles I aC i I dC en els territoris costaners de Catalunya. Una part d’aquest estudi contempla el càlcul de les propietats mecàniques d’aquestes àmfores i la seva avaluació en funció de la tipologia amforal, a partir de l’Anàlisi d’Elements Finits (AEF). L’AEF és una aproximació numèrica que té el seu origen en les ciències d’enginyeria i que ha estat emprada per estimar el comportament mecànic d’un model en termes, per exemple, de deformació i estrès. Així, un objecte, o millor dit el seu model, es dividit en sub-dominis anomenats elements finits, als quals se’ls atribueixen les propietats mecàniques del material en estudi. Aquests elements finits estan connectats formant una xarxa amb constriccions que pot ser definida. En el cas d’aplicar una força determinada a un model, el comportament de l’objecte pot ser estimat mitjançant el conjunt d’equacions lineals que defineixen el rendiment dels elements finits, proporcionant una bona aproximació per a la descripció de la deformació estructural. Així, aquesta simulació per ordinador suposa una important eina per entendre la funcionalitat de ceràmiques arqueològiques. Aquest procediment representa un model quantitatiu per predir el trencament de l’objecte ceràmic quan aquest és sotmès a diferents condicions de pressió. Aquest model ha estat aplicat a diferents tipologies amforals. Els resultats preliminars mostren diferències significatives entre la tipologia pre-romana i les tipologies romanes, així com entre els mateixos dissenys amforals romans, d’importants implicacions arqueològiques.

Impact of low-level viremia on clinical and virological outcomes in treated HIV-1-infected patients.

BACKGROUND: The goal of antiretroviral therapy (ART) is to reduce HIV-related morbidity and mortality by suppressing HIV replication. The prognostic value of persistent low-level viremia (LLV), particularly for clinical outcomes, is unknown. OBJECTIVE: Assess the association of different levels of LLV with virological failure, AIDS event, and death among HIV-infected patients receiving combination ART. METHODS: We analyzed data from 18 cohorts in Europe and North America, contributing to the ART Cohort Collaboration. Eligible patients achieved viral load below 50 copies/ml within 3-9 months after ART initiation. LLV50-199 was defined as two consecutive viral loads between 50 and 199 copies/ml and LLV200-499 as two consecutive viral loads between 50 and 499 copies/ml, with at least one between 200 and 499 copies/ml. We used Cox models to estimate the association of LLV with virological failure (two consecutive viral loads at least 500 copies/ml or one viral load at least 500 copies/ml, followed by a modification of ART) and AIDS event/death. RESULTS: Among 17 902 patients, 624 (3.5%) experienced LLV50-199 and 482 (2.7%) LLV200-499. Median follow-up was 2.3 and 3.1 years for virological and clinical outcomes, respectively. There were 1903 virological failure, 532 AIDS events and 480 deaths. LLV200-499 was strongly associated with virological failure [adjusted hazard ratio (aHR) 3.97, 95% confidence interval (CI) 3.05-5.17]. LLV50-199 was weakly associated with virological failure (aHR 1.38, 95% CI 0.96-2.00). LLV50-199 and LLV200-499 were not associated with AIDS event/death (aHR 1.19, 95% CI 0.78-1.82; and aHR 1.11, 95% CI 0.72-1.71, respectively). CONCLUSION: LLV200-499 was strongly associated with virological failure, but not with AIDS event/death. Our results support the US guidelines, which define virological failure as a confirmed viral load above 200 copies/ml.

Multiple paternity and its consequences in the white campion " Silene latifolia "

Summary Several studies have demonstrated that the number of pollen donors siring seeds of individual fruits is frequently greater than one and, consequently, that plants have multiple mates. Multiple paternity can have important consequences at the population level. It influences the genetic variability of a population, the reproductive success of males and the fitness of females and future generations. It also influences male-male interactions for fertilization and it is fundamental in providing opportunity of female choice. I investigated the occurrence and the importance of multiple paternity within fruits in natural populations of the dioecious Silene latifolia using microsatellite DNA markers, especially developed for this study. I found that multiple paternity occurs in all populations investigated in the European range of the species, varying from one to nine sires per fruit with a mean of three, suggesting that multiple paternity is highly prevalent in natural populations. In the presence of multiple paternity I investigated if there was a female genotype influence on siring success of the males. I used the same pollen mixture from two males and applied it to three replicate females of different relatedness (two full sisters and one unrelated). I found female genotype influence in one of the two populations investigated, which might reflect different population history. Since these results suggested some degree of female choice, we investigated whether the occurrence of multiple paternity and post-pollination selection could provide opportunity for inbreeding avoidance. First, I measured inbreeding depression at different life-cycle stages for offspring obtained by single-donor crosses with brothers or unrelated males replicated on distinct flowers on the same female plant. To address inbreeding avoidance, I determined paternity in crosses using mixed pollen loads of the two males. I found significant inbreeding depression in the studied population, even under benign experimental conditions, and although the unrelated male did not sire significantly more offspring, there was an effect of genetic dissimilarity on paternity. This suggests that paternity is affected by relatedness among mates, but maybe additionally affected by other factors such as pollen competitive ability or male-female interactions. Using inbred and outbred crosses, I further investigated sex ratio bias inheritance in this species, and found that sex ratio bias of the parental generation was significantly correlated to pollen germination success of the F2 generation, which suggests that sex ratio bias in this species results from the specific X/Y combination and not only on Y performance. An effect of X and Y is consistent with sex chromosome meiotic drive. In conclusion, I found multiple paternity to be widespread in the study species and that females of similar genotype produce similar paternity shares. I found that inbreeding depression is substantial, therefore receiving pollen from several donors might lead to fewer inbred offspring, I also found an effect of genetic dissimilarity on paternity shares, which indicates that there is some ability to discriminate against related pollen, although this seems not to be the only determinant of paternity outcome. Finally I found sex ratio bias to be dependent on both X and Y chromosomes as predicted by sex chromosome meiotic drive. Résumé Plusieurs études ont démontré qu'il n'était pas rare que les graines contenues dans un même fruit soient issues de la fécondation par plusieurs pollens provenant de mâles différents, ce qui sous-entend que les plantes peuvent avoir plusieurs partenaires sexuels. La paternité multiple peut avoir d'importantes conséquences au niveau populationnel dans la mesure où elle peut influencer le degré de variabilité génétique de la population, le succès reproducteur des mâles, la fitness des femelles et des futures générations. La paternité multiple peut également avoir un impact sur les interactions mâle-mâle lors de la fertilisation et peut être considérée comme fondamentale vis-à-vis de la femelle, qui y trouve alors une opportunité de choisir son ou ses partenaires. Dans le cadre de ce travail de thèse j'ai cherché à déterminer si la paternité multiple était un phénomène observable et important dans les populations naturelles de l'espèce dioïque, Silene latifolia. Pour ce faire, j'ai utilisé des marqueurs microsatellites, spécialement développés pour cette étude. J'ai observé des phénomènes de paternité multiple dans toutes les populations de l'étude, réparties dans l'aire de distribution européenne de l'espèce. Le nombre de pères par fruit varie de un à neuf, avec un nombre moyen de trois, ce qui signifie que la paternité multiple est très répandue dans les populations naturelles. En raison de ces résultats, je me suis demandée si le génotype de la femelle influence le succès de paternité des mâles. J'ai alors réalisé des pollinisations manuelles sur la base d'un mélange de pollens issus de deux mâles, que j'ai appliqué sur trois femelles (réplicats) présentant différents degrés d'apparentement (deux soeurs. et une femelle étrangère). Il ressort de cette expérience que le génotype de la femelle peut influencer la paternité dans l'une des deux populations étudiées, ce qui pourrait refléter des différences en terme d'histoire des populations. Dans la mesure où ces résultats suggèrent un certain degré de choix chez la femelle, j'ai cherché à savoir si la paternité multiple et la sélection post-pollinisation pouvaient être des moyens d'éviter les croisements consanguins. Dans un premier temps, j'ai évalué la dépression de consanguinité à différentes étapes du cycle de vie chez des descendants issus de croisements à un seul donneur, celui-ci étant alternativement un frère ou un étranger, répliqués sur plusieurs fleurs d'une même plante femelle. Afin d'estimer l'évitement de croisements consanguins, j'ai effectué des croisements dont le pollen était un mélange des deux mâles (frère et étranger), puis j'ai déterminé la paternité dans les fruits obtenus. J'ai pu mettre en évidence un effet de dépression de consanguinité- significatif dans les populations étudiées, même dans des conditions expérimentales moins rudes qu'à l'extérieur. Bien que le mâle étranger n'ait pas engendré un nombre significativement plus important de graines, il y avait un effet de dissimilarité génétique sur la paternité. Ceci suggère que la paternité est affectée par le degré d'apparentement entre les partenaires, mais qu'elle peut aussi être affectée par d'autres facteurs tels que la compétitivité du pollen ou encore par les interactions mâles-femelles. L'utilisation de croisements consanguins et hybrides m'a également permis d'étudier l'héritabilité du biais de sex ratio chez cette espèce. Il s'est avéré que le biais de sex ratio de la génération parentale était significativement corrélé au succès de germination du pollen de la génération F2, ce qui signifie que, chez cette espèce, le biais de sex ratio résulte d'une combinaison spécifique de X/Y et non uniquement de la performance de Y. Un effet de X et Y est compatible avec l'hypothèse de distorsion de ségrégation méiotique des chromosomes sexuels. En conclusion, il ressort de mes résultats que la paternité multiple est un phénomène largement répandu chez S. latifolia et la paternité accomplie par un mâle est plus similaire entre soeurs qu'avec une femelle étrangère J'ai également mis en évidence que la dépression de consanguinité a un impact considérable; aussi, recevoir du pollen de plusieurs donneurs différents pourrait permettre à la femelle de produire moins de descendants consanguins. J'ai aussi trouvé un effet de la dissimilarité génétique sur le partage de paternité, ce qui indique que la discrimination contre le pollen d'apparentés est possible, bien que cela ne semble pas être le seul facteur déterminant dans le résultat de la paternité. Enfin, j'ai trouvé que le biais de sex ratio est dépendant des deux chromosomes X et Y, conformément à la théorie de distorsion de ségrégation méiotique des chromosomes sexuels.