Outdoor and indoor benzene evaluation by GC-FID and GC-MS/MS

The evaluation of benzene in different environments such as indoor (with and without tobacco smoke), a city area, countryside, gas stations and near exhaust pipes from cars running on different types of fuels was performed. The samples were analyzed using gas chromatography (GC) with flame ionization detection (FID) and tandem mass spectrometric detection (MS/MS) (to confirm the identification of benzene in the air samples). Operating conditions for the GC-MS analysis were optimized as well as the sampling and sample preparation. The results obtained in this work indicate that i) the type of fuel directly influences the benzene concentration in the air. Gasoline with additives provided the highest amount of benzene followed by unleaded gasoline and diesel; ii) the benzene concentration in the gas station was always higher than the advisable limit established by law (5 μg m−3) and during the unloading of gasoline the achieved concentration was 8371 μg m−3; iii) the data from the countryside (Taliscas) and the urban city (Matosinhos) were below 5 μg m−3 except 5 days after a fire on a petroleum refinery plant located near the city; iv) it was proven that in coffee shops where smoking is allowed the benzene concentration is higher (6 μg m−3) than in coffee shops where this is forbidden (4 μg m−3). This method may also be helpful for environmental analytical chemists who use GC-MS/MS for the confirmation or/and quantification of benzene.

Development of Chitosan and Poly (Vinyl Alcohol) Blended scaffolds for cell culture using supercritical fluids technology

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Mestrado Integrado em Engenharia Química e Bioquímica

Institutional and matrix support and its relationship with primary healthcare

OBJECTIVE To analyze whether the level of institutional and matrix support is associated with better certification of primary healthcare teams.METHODS In this cross-sectional study, we evaluated two kinds of primary healthcare support – 14,489 teams received institutional support and 14,306 teams received matrix support. Logistic regression models were applied. In the institutional support model, the independent variable was “level of support” (as calculated by the sum of supporting activities for both modalities). In the matrix support model, in turn, the independent variables were the supporting activities. The multivariate analysis has considered variables with p < 0.20. The model was adjusted by the Hosmer-Lemeshow test.RESULTS The teams had institutional and matrix supporting activities (84.0% and 85.0%), respectively, with 55.0% of them performing between six and eight activities. For the institutional support, we have observed 1.96 and 3.77 chances for teams who had medium and high levels of support to have very good or good certification, respectively. For the matrix support, the chances of their having very good or good certification were 1.79 and 3.29, respectively. Regarding to the association between institutional support activities and the certification, the very good or good certification was positively associated with self-assessment (OR = 1.95), permanent education (OR = 1.43), shared evaluation (OR = 1.40), and supervision and evaluation of indicators (OR = 1.37). In regards to the matrix support, the very good or good certification was positively associated with permanent education (OR = 1.50), interventions in the territory (OR = 1.30), and discussion in the work processes (OR = 1.23).CONCLUSIONS In Brazil, supporting activities are being incorporated in primary healthcare, and there is an association between the level of support, both matrix and institutional, and the certification result.

Vocal warm-up and breathing training for teachers: randomized clinical trial

OBJECTIVE To compare the effectiveness of two speech therapy interventions, vocal warm-up and breathing training, focusing on teachers’ voice quality.METHODS A single-blind, randomized, parallel clinical trial was conducted. The research included 31 20 to 60-year old teachers from a public school in Salvador, BA, Northeasatern Brazil, with minimum workloads of 20 hours a week, who have or have not reported having vocal alterations. The exclusion criteria were the following: being a smoker, excessive alcohol consumption, receiving additional speech therapy assistance while taking part in the study, being affected by upper respiratory tract infections, professional use of the voice in another activity, neurological disorders, and history of cardiopulmonary pathologies. The subjects were distributed through simple randomization in groups vocal warm-up (n = 14) and breathing training (n = 17). The teachers’ voice quality was subjectively evaluated through the Voice Handicap Index (Índice de Desvantagem Vocal, in the Brazilian version) and computerized voice analysis (average fundamental frequency, jitter, shimmer, noise, and glottal-to-noise excitation ratio) by speech therapists.RESULTS Before the interventions, the groups were similar regarding sociodemographic characteristics, teaching activities, and vocal quality. The variations before and after the intervention in self-assessment and acoustic voice indicators have not significantly differed between the groups. In the comparison between groups before and after the six-week interventions, significant reductions in the Voice Handicap Index of subjects in both groups were observed, as wells as reduced average fundamental frequencies in the vocal warm-up group and increased shimmer in the breathing training group. Subjects from the vocal warm-up group reported speaking more easily and having their voices more improved in a general way as compared to the breathing training group.CONCLUSIONS Both interventions were similar regarding their effects on the teachers’ voice quality. However, each contribution has individually contributed to improve the teachers’ voice quality, especially the vocal warm-up.TRIAL RECORD NCT02102399, “Vocal Warm-up and Respiratory Muscle Training in Teachers”.

Assessment of eutrophication status of two Northern Irish Loughs

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia do Ambiente, perfil Engenharia Sanitária

Transient Spaces: unsettling boundaries and norms at the cultural event Noc Noc, Guimarães, Portugal

Cities are increasingly expected to be creative, inventive and to exhibit intense expressivity. In the past decades many cities have experienced growing pressure to produce and stage cultural events of different sorts and to develop new strategies that optimize competitive advantages, in order to promote themselves and to boost and sell their image. Often these actions have relied on heavy public investment and major private corporation sponsoring, but it is not always clear or measured how successful and reproductive these investments have been. In the context of strained public finances and profound economic crisis of European peripheral countries, events that emerge from local communities and have low budgets, which manage to create significant fluxes of visitors and visibility, assume an increased interest. In order to reflect and sketch possible answers, we look to an emerging body of literature concerning creative cities, and we focus on the organisation of a particular cultural event and its impact and assimilation into a medium size Portuguese city. This paper looks at the two editions (2011 and 2012) of one of such events – Noc Noc – organized by a local association in the city of Guimarães, Portugal. Inspired by similar events, Noc Noc is based on creating transient spaces of culture which are explored by artists and audiences, by transforming numerous homes into ephemeral convivial and playful social ‘public’ environments. The event is based on a number of cultural venues/homes scattered around the old and newer city, which allows for an informal urban exploration and an autonomous rambling and getting lost along streets. This strategy not only disrupts the cleavages between public and private space permitting for various transgressions, but it also disorders normative urban experiences and unsettles the dominant role of the city council as the culture patron of the large majority of events. Guimarães, an UNESCO World Heritage City was the European Capital of Culture in 2012, with a public investment of roughly 73 million euro. By interviewing a sample of people who have hosted these transitory art performances and exhibitions, sometimes doubling as artists, the events’ organizers and by experience both editions of the event, this paper illustrates how urban citizens’ engagement and motivations in a low budget cultural event can strengthen community ties. Furthermore, it also questions the advantages of large scale high budget events, and how this event may be seen as unconscious counter movement against a commodification of cultural events and everyday urban experience at large, engaging with the concepts of staging and authenticity.

Sustainability and economic evaluation of microalgae grown in brewery wastewater

This article evaluates the sustainability and economic potential of microalgae grown in brewery wastewater for biodiesel and biomass production. Three sustainability and two economic indicators were considered in the evaluation within a life cycle perspective. For the production system the most efficient process units were selected. Results show that harvesting and oil separation are the main process bottlenecks. Microalgae with higher lipid content and productivity are desirable for biodiesel production, although comparable to other biofuel’s feedstock concerning sustainability. However, improvements are still needed to reach the performance level of fossil diesel. Profitability reaches a limit for larger cultivation areas, being higher when extracted biomass is sold together with microalgae oil, in which case the influence of lipid content and areal productivity is smaller. The values of oil and/or biomass prices calculated to ensure that the process is economically sound are still very high compared with other fuel options, especially biodiesel.

A plugin for spatial and thematic comparison in the cadastral domain.

Dissertation submitted in partial fulfilment of the requirements for the Degree of Master of Science in Geospatial Technologies.

An information model for lean, agile, resilient and green supply chain management

Dissertação para a obtenção de Grau de Mestre em Engenharia e Gestão Industrial

Desenvolvimento de programa em linguagem Matlab® para cálculo pelo método de elementos finitos

Para o projeto de qualquer estrutura existente (edifícios, pontes, veículos, máquinas, etc.) é necessário conhecer as condições de carga, geometria e comportamento de todas as suas partes, assim como respeitar as normativas em vigor nos países nos quais a estrutura será aplicada. A primeira parte de qualquer projeto nesta área passa pela fase da análise estrutural, onde são calculadas todas as interações e efeitos de cargas sobre as estruturas físicas e os seus componentes de maneira a verificar a aptidão da estrutura para o seu uso. Inicialmente parte-se de uma estrutura de geometria simplificada, pondo de parte os elementos físicos irrelevantes (elementos de fixação, revestimentos, etc.) de maneira a simplificar o cálculo de estruturas complexas e, em função dos resultados obtidos da análise estrutural, melhorar a estrutura se necessário. A análise por elementos finitos é a ferramenta principal durante esta primeira fase do projeto. E atualmente, devido às exigências do mercado, é imprescindível o suporte computorizado de maneira a agilizar esta fase do projeto. Existe para esta finalidade uma vasta gama de programas que permitem realizar tarefas que passam pelo desenho de estruturas, análise estática de cargas, análise dinâmica e vibrações, visualização do comportamento físico (deformações) em tempo real, que permitem a otimização da estrutura em análise. Porém, estes programas demostram uma certa complexidade durante a introdução dos parâmetros, levando muitas vezes a resultados errados. Assim sendo, é essencial para o projetista ter uma ferramenta fiável e simples de usar que possa ser usada para fins de projeto de estruturas e otimização. Sobre esta base nasce este projeto tese onde se elaborou um programa com interface gráfica no ambiente Matlab® para a análise de estruturas por elementos finitos, com elementos do tipo Barra e Viga, quer em 2D ou 3D. Este programa permite definir a estrutura por meio de coordenadas, introdução de forma rápida e clara, propriedades mecânicas dos elementos, condições fronteira e cargas a aplicar. Como resultados devolve ao utilizador as reações, deformações e distribuição de tensões nos elementos quer em forma tabular quer em representação gráfica sobre a estrutura em análise. Existe ainda a possibilidade de importação de dados e exportação dos resultados em ficheiros XLS e XLSX, de maneira a facilitar a gestão de informação. Foram realizados diferentes testes e análises de estruturas de forma a validar os resultados do programa e a sua integridade. Os resultados foram todos satisfatórios e convergem para os resultados de outros programas, publicados em livros, e para cálculo a mão feitos pelo autor.

Assessment of groundwater contamination in an agricultural peri-urban area (NW Portugal): an integrated approach

The excessive use of pesticides and fertilisers in agriculture has generated a decrease in groundwater and surface water quality in many regions of the EU, constituting a hazard for human health and the environment. Besides, on-site sewage disposal is an important source of groundwater contamination in urban and peri-urban areas. The assessment of groundwater vulnerability to contamination is an important tool to fulfil the demands of EU Directives. The purpose of this study is to assess the groundwater vulnerability to contamination related mainly to agricultural activities in a peri-urban area (Vila do Conde, NW Portugal). The hydrogeological framework is characterised mainly by fissured granitic basement and sedimentary cover. Water samples were collected and analysed for temperature, pH, electrical conductivity, chloride, phosphate, nitrate and nitrite. An evaluation of groundwater vulnerability to contamination was applied (GOD-S, Pesticide DRASTIC-Fm, SINTACS and SI) and the potential nitrate contamination risk was assessed, both on a hydrogeological GIS-based mapping. A principal component analysis was performed to characterised patterns of relationship among groundwater contamination, vulnerability, and the hydrogeological setting assessed. Levels of nitrate above legislation limits were detected in 75 % of the samples analysed. Alluvia units showed the highest nitrate concentrations and also the highest vulnerability and risk. Nitrate contamination is a serious problem affecting groundwater, particularly shallow aquifers, especially due to agriculture activities, livestock and cesspools. GIS-based cartography provided an accurate way to improve knowledge on water circulation models and global functioning of local aquifer systems. Finally, this study highlights the adequacy of an integrated approach, combining hydrogeochemical data, vulnerability assessments and multivariate analysis, to understand groundwater processes in peri-urban areas.

Countries three Wise Men: Sustainability, Innovation, and Competitiveness

Purpose: The studies on links between sustainability, innovation, and competitiveness have been mainly focused at organizational and business level. The purpose of this research is to investigate if there is a correlation between these three variables at country level. Using international well recognized rankings of countries sustainability, innovation, and competitiveness, correlation analysis was performed allowing for the conclusion that there are indeed high correlations (and possible relationships) between the three variables at country level. Design/methodology/approach: Sustainability, innovation, and competitiveness literature were reviewed identifying a lack of studies examining these three variables at country level. Three major well recognized indexes were used to support the quantitative research: The World Economic Forum (2013) Sustainability-adjusted global competitiveness index, the Global Innovation Index (2014) issued by Cornell University, INSEAD, and WIPO and the IMD World Competitiveness Yearbook (2014). After confirming the distributions normality, Pearson correlation analysis was made with results showing high linear correlations between the three indexes. Findings: The results of the correlation analysis using Pearson correlation coefficient (all correlation coefficients are greater than 0.73) give a strong support to the conclusion that there is indeed a high correlation (and a possible relationship) between social sustainability, innovation and competitiveness at country level. Research limitations/implications: Further research is advisable to better understand the factors that contribute to the presented results and to establish a global paradigm linking these three main constructs (social sustainability, innovation, and competitiveness). Some authors consider that these measurements are not fully supported (e.g. due to different countries standards), however, it is assumed these differing underlying methodological approaches, by being used in conjunction, can be considered as a set of reliable and useful performance indicators. Practical implications: The results highlight the simultaneous relationship between social sustainability, innovation and competitiveness superior performance and the need to take that these considerations into business and operating models. Social implications: This research suggests that sustainability and innovation policies, strategies and practices are relevant for countries competitiveness and should be promoted particularly in countries ranked low on sustainability and innovation global scoring indexes. Originality/value: This is one of the few studies addressing the relationships between sustainability, innovation and competitiveness at country level.

Quantification of urban land use intensity - A case of Dhaka City of Bangladesh

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Cancer Rehabilitation Indicators for Europe

Little is known of cancer rehabilitation needs in Europe. EUROCHIP-3 organised a group of experts to propose a list of population-based indicators used for describing cancer rehabilitation across Europe. The aim of this study is to present and discuss these indicators. A EUROCHIP-3 expert panel reached agreement on two types of indicators. (a) Cancer prevalence indicators. These were proposed as a means of characterising the burden of cancer rehabilitation needs by time from diagnosis and patient health status. These indicators can be estimated from cancer registry data or by collecting data on follow-up and treatments for samples of cases archived in cancer registries. (b) Indicators of rehabilitation success. These include: return to work, quality of life, and satisfaction of specific rehabilitation needs. Studies can be performed to estimate these indicators in individual countries, but to obtain comparable data across European countries it will be necessary to administer a questionnaire to randomly selected samples of patients from population-based cancer registry databases. However, three factors complicate questionnaire studies: patients may not be aware that they have cancer; incomplete participation in surveys could lead to bias; and national confidentiality laws in some cases prohibit cancer registries from approaching patients. Although these studies are expensive and difficult to perform, but as the number of cancer survivors increases, it is important to document their needs in order to provide information on cancer control.

Developing and validating a measure of the strength of the HRM system: Operationalizing the construct and relationships among its dimensions

The four studies in this article introduce a questionnaire to measure Strength of the HRM System (HRMSQ), a multidimensional construct, theoretically developed by Bowen and Ostroff (2004). Strength of the HRM System is a set of process characteristics that lead to effectiveness in conveying signals to employees that allow them to create a shared meaning of desired and appropriate work behaviours. Nine characteristics are suggested, grouped in three features: Distinctiveness, Consistency and Consensus. Study 1 developed and tested a questionnaire in a sample of workers from five different sectors. Study 2 cross-validated the measure in a sample of civil servants in a municipality. These two studies used performance appraisal as the reference HRM practice and led to a short version of the HRMSQ. Study 3 and Study 4 extend the HRMSQ to several common HRM practices. The HRMSQ is tested in two samples, of call center and several private and public organizations‟ workers (study 3). In study 4 the questionnaire is refined and tested with a sample from a hotel chain and finally cross-validated with two other samples, in the insurance and batteries sectors, leading to a longer version of the HRMSQ. Content analysis of several interviews with human resource managers and the Rasch model (1960, 1961, 1980), were used to define and select the indicators of the questionnaire. Convergent, discriminant and predictive validity of the measure are tested. The results of the four studies highlight the complexity of the relationships between the proposed characteristics and support the validity of a parsimonious measure of Strength of the HRM System.