715 resultados para weight lifting
Resumo:
The purpose of the present study was to examine two leadership styles of personal trainers (bland versus enriched) to evaluate their effects on exercise-related outcomes. Participants were 103 university women with no previous experience weight training. Participants were randomly assigned to one of the two leadership style conditions. They completed primary measures prior to being introduced to the personal trainer. Next, participants completed an introductory weight training session, followed by post-manipulation measures. The leadership styles were successfully manipulated. Participants in the enriched leadership style condition reported significantly higher levels of enjoyment and intention to exercise. Participants in the bland leadership style condition reported significantly higher levels of social anxiety; no differences were found for task self-efficacy, self-presentational efficacy, social physique anxiety, or handgrip performance between groups. Thus, an enriched leadership style of personal trainers can increase positive psychological outcomes.
Resumo:
The article studies the presence of boars in reducing fighting in the groups of pigs therefore reducing skin blemishes.
Resumo:
The purpose of the study was to investigate whether teaching inactive and low active women to use mirrors for form and technique purposes could lessen the negative impact of mirrors on self-presentational concerns, affect, and self-efficacy. Eligible women (N = 82) underwent a one-on-one weight training orientation with a personal trainer. Participants were randomized into one of four experimental groups, each unique in the type of feedback (general or technique-specific) and the degree of focus on the mirror for technique reinforcement. Questionnaires assessed study outcomes pre- and post-orientation. Results indicated groups did not significantly differ on any post-condition variables, when controlling for pre-condition values (all p’s >.05). All groups showed outcome improvements following the orientation. This suggests that during a complex task, a personal trainer who emphasizes form and technique can facilitate improvements to psychological outcomes in novice exercisers, independent of the presence of mirrors or directional cues provided.
Resumo:
The article was first published in the McGill Law Journal. Un résumé en français est disponible.
Resumo:
Résumé Les préoccupations et comportements alimentaires entourant le poids sont omniprésentes chez les jeunes adolescentes et femmes qui habitent dans les cultures occidentales où les formes corporelles sont orientées vers un idéal ultra-mince. L’objectif de cette étude est d’examiner si une plus grande exposition aux endroits faisant la promotion de la minceur est associée à des préoccupations pour le poids plus élevées chez les femmes. Cette étude fait partie d’un projet intitulé ¨Social, cultural, and economic disparities and disordered eating: Understanding the contribution of neighbourhood and individual level factors¨ (Gauvin, Steiger, & Brodeur, 2009). Un échantillon de 1288 femmes âgées entre 20 et 40 ans et résidant à Montréal depuis au moins 12 mois ont répondu à un sondage téléphonique. Des régressions logistiques ont comparé les femmes se situant dans le quintile le plus élevé des préoccupations de poids avec les femmes dans les autres quintiles en fonction de leur exposition 15 jours ou plus dans des endroits faisant la promotion de la minceur. De plus, une analyse de sensibilité a vérifié si l’association demeurait significative à d’autres niveaux d’exposition. Les facteurs confondants ont été contrôlés statistiquement. Les résultats démontrent qu’une fréquentation d’au moins 15 jours par mois d’endroits faisant la promotion de la minceur est associée à des préoccupations plus élevées pour le poids. Aussi, fréquenter ces lieux entre 15 et 20 jours/mois est aussi associé à des préoccupations de poids élevées. Des interventions de santé publique pourraient viser la diminution des pressions socioculturelles vers la minceur.
Resumo:
Notre thèse de doctorat a pour but d’évaluer les contraintes psychosociales au travail et les symptômes dépressifs majeurs chez les femmes enceintes. Plus spécifiquement, il est question d’identifier les facteurs associés aux symptômes dépressifs majeurs, à une tension psychologique au travail ou travail "tendu" ("high-strain" job), à un travail "tendu" avec un faible soutien social au travail ("Iso-strain"), et enfin d’évaluer l’association entre ces contraintes psychosociales au travail et les symptômes dépressifs majeurs chez les femmes enceintes au travail. Les données analysées sont issues de l’Étude Montréalaise sur la Prématurité, une étude de cohorte prospective menée entre mai 1999 et avril 2004, auprès de 5 337 femmes enceintes interviewées à 24-26 semaines de grossesse dans quatre hôpitaux de l’île de Montréal (Québec, Canada). L’échelle CES-D (Center for Epidemiological Studies Depression Scale) a été utilisée pour mesurer les symptômes dépressifs majeurs (score CES-D ≥23). L’échelle abrégée de Karasek a été utilisée pour mesurer les contraintes psychosociales au travail. La présente étude a conduit à la rédaction de quatre articles scientifiques qui seront soumis à des revues avec comité de pairs. Le premier article a permis de comparer la prévalence des symptômes dépressifs majeurs dans différents sous-groupes de femmes enceintes : femmes au foyer, femmes au travail, femmes en arrêt de travail, femmes aux études et de rechercher les facteurs de risque associés aux symptômes dépressifs majeurs pendant la grossesse. À 24-26 semaines de grossesse, la prévalence des symptômes dépressifs majeurs était de 11,9% (11,0-12,8%) pour l’ensemble des femmes enceintes à l’étude (N=5 337). Les femmes enceintes au travail avaient une proportion de symptômes dépressifs moins élevée [7,6% (6,6-8,7%); n=2 514] par rapport aux femmes enceintes au foyer qui avaient les prévalences les plus élevées [19,1% (16,5-21,8%); n=893], suivi des femmes enceintes en arrêt de travail [14,4% (12,7-16,1%); n=1 665] et des femmes enceintes aux études [14,3% (10,3-19,1%); n=265]. Les caractéristiques personnelles (non professionnelles) associées aux symptômes dépressifs majeurs étaient, après ajustement pour toutes les variables, le statut d’emploi, un faible niveau d’éducation, un faible soutien social en dehors du travail, le fait d’avoir vécu des événements stressants aigus, d’avoir manqué d’argent pour les besoins essentiels, les difficultés relationnelles avec son partenaire, les problèmes de santé chronique, le pays de naissance et le tabagisme. Le deuxième article avait pour objectif de décrire l’exposition aux contraintes psychosociales au travail et d’identifier les facteurs qui y sont associés chez les femmes enceintes de la région de Montréal, au Québec (N=3 765). Au total, 24,4% des travailleuses enceintes se trouvaient dans la catégorie travail "tendu" ("high-strain" job) et 69,1% d’entre elles avaient eu un faible soutien social au travail ("Iso-strain"). Les facteurs de risque associés à un travail "tendu" étaient : un faible soutien social au travail, certains secteurs d’activité et niveaux de compétences, le fait de travailler plus de 35 heures par semaine, les horaires irréguliers, la posture de travail, le port de charges lourdes, le jeune âge des mères, une immigration ≥ 5 ans, un bas niveau d’éducation, la monoparentalité et un revenu annuel du ménage <50 000$. Le troisième article a évalué l’association entre les contraintes psychosociales au travail et les symptômes dépressifs majeurs chez les femmes enceintes au travail (N=3 765). Dans les analyses bivariées et multivariées, les femmes enceintes qui avaient un "high-strain job" ou un "Iso-strain" présentaient davantage de symptômes dépressifs majeurs que les autres sous-groupes. Les contraintes psychosociales au travail étaient associées aux symptômes dépressifs majeurs lorsqu’on prenait en compte les autres facteurs organisationnels et les facteurs personnels auxquels elles étaient confrontées à l’extérieur de leur milieu de travail. Notre étude confirme les évidences accumulées en référence aux modèles théoriques "demande-contrôle" et "demande-contrôle-soutien" de Karasek et Theorell. L’impact de ce dernier et le rôle crucial du soutien social au travail ont été mis en évidence chez les femmes enceintes au travail. Cependant, l’effet "buffer" du modèle "demande-contrôle-soutien" n’a pas été mis en évidence. Le quatrième article a permis d’évaluer l’exposition aux contraintes psychosociales au travail chez les femmes enceintes au travail et en arrêt de travail pour retrait préventif et de mesurer l’association entre les contraintes psychosociales au travail et les symptômes dépressifs majeurs en fonction du moment du retrait préventif (N=3 043). À 24-26 semaines de grossesse, les femmes enceintes en retrait préventif du travail (31,4%) avaient été plus exposées à un "high-strain job" (31,0% vs 21,1%) et à un "Iso-strain" (21,0% vs 14,2%) que celles qui continuaient de travailler (p<0,0001); et elles avaient des proportions plus élevées de symptômes dépressifs majeurs. Après ajustement pour les facteurs de risque personnels et professionnels, "l’Iso-strain" restait significativement associé aux symptômes dépressifs majeurs chez les femmes qui continuaient de travailler tout comme chez celles qui ont cessé de travailler, et cela quel que soit leur durée d’activité avant le retrait préventif du travail (4 à 12 semaines/ 13 à 20 semaines/ ≥ 21 semaines). Les contraintes psychosociales au travail représentent un important facteur de risque pour la santé mentale des travailleuses enceintes. Malgré l’application du programme "pour une maternité sans danger" il s’avère nécessaire de mettre en place dans les milieux de travail, des mesures de prévention, de dépistage et d’intervention afin de réduire la prévalence des symptômes dépressifs prénataux et l’exposition aux contraintes psychosociales au travail pour prévenir les complications maternelles et néonatales. D’autant plus que, la dépression prénatale est le principal facteur de risque de dépression postpartum, de même que les enfants nés de mères souffrant de dépression sont plus à risque de prématurité et de petit poids de naissance.
Resumo:
Liquid Crystalline DNA is emerging as an active area of research, due to its potential applications in diverse fields, ranging from nanoelectronics to therapeutics. Since, counter ion neutralization is an essential requirement for the expression of LC DNA, and the present level of understanding on the LC phase behavior of high molecular weight DNA is inadequate, a thorough investigation is required to understand the nature and stability of these phases under the influence of various cationic species. The present study is, therefore mainly focused on a comparative investigation of the effect of metal ions of varying charge, size, hydration and binding modes on the LC phase behavior of high molecular weight DNA. The main objectives of the works are investigations on the induction and stabilization of LC phases of high molecular weight DNA by alkali metal ions, investigations on the induction and stabilization of LC phases of high molecular weight DNA by alkaline earth metal ions, effects of multivalent, transition and heavy metal ions on the LC phase behavior of high molecular weight DNA and investigations on spermine induced LC behavior of high molecular weight DNA in the presence of alkali and alkaline earth metal ions. The critical DNA concentration (CD) required for the expression of LC phases, phase transitions and their stability varied considerably when the binding site of the metal ions changed from phosphate groups to the nitrogenous bases of DNA, with Li+ giving the highest stability. Multiple LC phases with different textures, sometimes diffused and unstable or otherwise mainly distinct and clear, were observed on mixing metal ions with DNA solutions, which in turn depended on the charge, size, hydration factor, binding modes, concentration of the metal ions and time. Molecular modeling studies on binding of selected metal ions to DNA supported the experimental findings
Resumo:
Dept.of Polymer Science and Rubber Technology,Cochin University of Science and Technology
Resumo:
The length – weight relationship and relative condition factor of the shovel nose catfish, Arius subrostratus (Valenciennes, 1840) from Champakkara backwater were studied by examination of 392 specimens collected during June to September 2008. These fishes ranged from 6 to 29 cm in total length and 5.6 to 218 g in weight. The relation between the total length and weight of Arius subrostratus is described as Log W = -1.530+2.6224 log L for males, Log W = - 2.131 + 3.0914 log L for females and Log W = - 1.742 + 2.8067 log L for sexes combined. The mean relative condition factor (Kn) values ranged from 0.75 to 1.07 for males, 0.944 to 1.407 for females and 0.96 to 1.196 for combined sexes. The length-weight relationship and relative condition factor showed that the well-being of A. subrostratus is good. The morphometric measurements of various body parts and meristic counts were recorded. The morphometric measurements were found to be non-linear and there is no significant difference observed between the two sexes. From the present investigation, the fin formula can be written as D: I, 7; P: I, 12; A: 17 – 20; C: 26 – 32. There is no change in meristic counts with the increase in body length.
Resumo:
Available information on abundance of myctophids and their utilisation indicate that there is excellent scope for development of myctophid fisheries in Indian Ocean. Most of the conventional fish stocks have reached a state of full exploitation or over-exploitation. Hence there is need to locate new and conventional fishery resources in order to fill in the supply-demand gap, in the face of increasing demand for fish. Information on length-weight relationship, age and growth, spawning season, fecundity and age at maturity and information on bycatch discards are required for sustainable utilization of myctophid resource in the Indian Ocean
Resumo:
This study aimed at evaluating the effects of different levels of rosemary (Rosmarinus officinalis) extract on growth rate, hematology and cell-mediated immune response in Markhoz newborn goat kids. Twenty four goat kids (aged 7 +/- 3 days) were randomly allotted to four groups with six replicates. The groups included: control, T1, T2 and T3 groups which received supplemented-milk with 0, 100, 200 and 400mg aqueous rosemary extract per kg of live body weight per day for 42 days. Body weights of kids were measured weekly until the end of the experiment. On day 42, 10 ml blood samples were collected from each kid through the jugular vein. Cell-mediated immune response was assessed through the double skin thickness after intradermal injection of phyto-hematoglutinin (PHA) at day 21 and 42. No significant differences were seen in initial body weight, average daily gain (ADG) and total gain. However, significant differences in globulin (P <0.05), and white blood cells (WBC) (P <0.001) were observed. There were no significant differences in haemoglobin (Hb), packed cell volume (PCV), red blood cells (RBC), lymphocytes and neutrophils between the treatments. Skin thickness in response to intra dermal injection of PHA significantly increased in the treated groups as compared to the control group at day 42 (P< 0.01) with the T3 group showing the highest response to PHA injection. In conclusion, the results indicated that aqueous rosemary extract supplemented-milk had a positive effect on immunity and skin thickness of newborn goat kids.
Resumo:
In composite agricultural materials such as grass, tee, medicinal plants; leaves and stems have a different drying time. By this behavior, after leaving the dryer, the stems may have greater moisture content than desired, while the leaves one minor, which can cause either the appearance of fungi or the collapse of the over-dried material. Taking into account that a lot of grass is dehydrated in forced air dryers, especially rotary drum dryers, this research was developed in order to establish conditions enabling to make a separation of the components during the drying process in order to provide a homogeneous product at the end. For this, a rotary dryer consisting of three concentric cylinders and a circular sieve aligned with the more internal cylinder was proposed; so that, once material enters into the dryer in the area of the inner cylinder, stems pass through sieve to the middle and then continue towards the external cylinder, while the leaves continue by the inner cylinder. For this project, a mixture of Ryegrass and White Clover was used. The characteristics of the components of a mixture were: Drying Rate in thin layer and in rotation, Bulk density, Projected Area, Terminal velocity, weight/Area Ratio, Flux through Rotary sieve. Three drying temperatures; 40°C, 60° C and 80° C, and three rotation speeds; 10 rpm, 20 rpm and 40 rpm were evaluated. It was found that the differences in drying time are the less at 80 °C when the dryer rotates at 40 rpm. Above this speed, the material adheres to the walls of the dryer or sieve and does not flow. According to the measurements of terminal velocity of stems and leaves of the components of the mixture, the speed of the air should be less than 1.5 m s-1 in the inner drum for the leaves and less than 4.5 m s-1 in middle and outer drums for stems, in such way that only the rotational movement of the dryer moves the material and achieves a greater residence time. In other hand, the best rotary sieve separation efficiencies were achieved when the material is dry, but the results are good in all the moisture contents. The best rotary speed of sieve is within the critical rotational speed, i.e. 20 rpm. However, the rotational speed of the dryer, including the sieve in line with the inner cylinder should be 10 rpm or less in order to achieve the greatest residence times of the material inside the dryer and the best agitation through the use of lifting flights. With a finite element analysis of a dryer prototype, using an air flow allowing speeds of air already stated, I was found that the best performance occurs when, through a cover, air enters the dryer front of the Middle cylinder and when the inner cylinder is formed in its entirety through a sieve. This way, air flows in almost equal amounts by both the middle and external cylinders, while part of the air in the Middle cylinder passes through the sieve towards the inner cylinder. With this, leaves do not adhere to the sieve and flow along drier, thanks to the rotating movement of the drums and the showering caused by the lifting flights. In these conditions, the differences in drying time are reduced to 60 minutes, but the residence time is higher for the stems than for leaves, therefore the components of the mixture of grass run out of the dryer with the same desired moisture content.
Resumo:
There are several factors that affect piglet survival and this has a bearing on sow productivity. Ten variables that influence pre-weaning vitality were analysed using records from the Pig Industry Board, Zimbabwe. These included individual piglet birth weight, piglet origin (nursed in original litter or fostered), sex, relative birth weight expressed as standard deviation units, sow parity, total number of piglets born, year and month of farrowing, within-litter variability and the presence of stillborn or mummified littermates. The main factors that influenced piglet mortality were fostering, parity and within-litter variability especially the weight of the individual piglet relative to the average of the litter (P<0.05). Presence of a mummified or stillborn littermate, which could be a proxy for unfavourable uterine environment or trauma during the birth process, did not influence pre-weaning mortality. Variability within a litter and the deviation of the weight of an individual piglet from the litter mean, influenced survival to weaning. It is, therefore, advisable for breeders to include uniformity within the litter as a selection criterion. The recording of various variables by farmers seems to be a useful management practice to identify piglets at risk so as to establish palliative measures. Further, farmers should know which litters and which piglets within a litter are at risk and require more attention.
Resumo:
Signalling off-chip requires significant current. As a result, a chip's power-supply current changes drastically during certain output-bus transitions. These current fluctuations cause a voltage drop between the chip and circuit board due to the parasitic inductance of the power-supply package leads. Digital designers often go to great lengths to reduce this "transmitted" noise. Cray, for instance, carefully balances output signals using a technique called differential signalling to guarantee a chip has constant output current. Transmitted-noise reduction costs Cray a factor of two in output pins and wires. Coding achieves similar results at smaller costs.
Revisión sistemática de la literatura: efecto de los rellenos inyectables en la región periorbitaria
Resumo:
Introducción: El conocimiento actual de la fisiopatología del envejecimiento periorbitario justifica la aplicación de materiales de relleno inyectables, dado que se enfocan en la restauración del volumen perdido en esta zona, convirtiéndose en una excelente alternativa a procedimientos quirúrgicos que remueven el tejido excedente. Sin embargo los efectos y la seguridad de esta naciente tendencia terapéutica aún no se sustentan en una sólida base científica. El objetivo de esta revisión es identificar el material de relleno inyectable más adecuado para el manejo de los defectos volumétricos estéticos de la región periorbitaria. Metodología: Se realizó una búsqueda exhaustiva de los artículos indexados publicados del 1º de enero de 2.000 al 30 de septiembre de 2.013, en diversas bases de datos electrónicas, se seleccionaron catorce publicaciones, se extrajo la información referente a datos demográficos, la intervención, el seguimiento y los desenlaces y se realizó un análisis de 14 estudios que cumplieron los criterios. Resultados: Todos los artículos incluidos poseían un bajo nivel de evidencia y del grado de recomendación. Todos los materiales de relleno se asociaron a altos niveles de satisfacción para el paciente, adecuada mejoría de la apariencia estética y similares efectos colaterales, el ácido hialurónico fue el material de relleno inyectable más utilizado en la región periorbitaria. Discusión: Los materiales de relleno inyectable mejoran los defectos volumétricos estéticos de la región periorbitaria pero es necesaria mayor evidencia para determinar el tipo relleno más apropiado para esta condición.