Comparative In vitro Mechanical Evaluation Of Techniques Using A 2.0 mm Locking Fixation System For Simulated Fractures Of The Mandibular Body.

To perform a comparative evaluation of the mechanical resistance of simulated fractures of the mandibular body which were repaired using different fixation techniques with two different brands of 2.0 mm locking fixation systems. Four aluminum hemimandibles with linear sectioning simulating a mandibular body fracture were used as the substrates and were fixed using the two techniques and two different brands of fixation plate. These were divided into four groups: groups I and II were fixed with one four-hole plate, with four 6 mm screws in the tension zone and one four-hole plate, with four 10 mm screws in the compression zone; and groups III and IV were fixed with one four-hole plate with four 6 mm screws in the neutral zone. Fixation plates manufactured by Tóride were used for groups I and III, and by Traumec for groups II and IV. The hemimandibles were submitted to vertical, linear load testing in an Instron 4411 servohydraulic mechanical testing unit, and the load/displacement (3 mm, 5 mm and 7 mm) and the peak loads were measured. Means and standard deviations were evaluated applying variance analysis with a significance level of 5%. The only significant difference between the brands was seen at displacements of 7 mm. Comparing the techniques, groups I and II showed higher mechanical strength than groups III and IV, as expected. For the treatment of mandibular linear body fracture, two locking plates, one in the tension zone and another in the compression zone, have a greater mechanical strength than a single locking plate in the neutral zone.

Mechanical And Photoelastic Analysis Of Four Different Fixation Methods For Mandibular Body Fractures.

The aim of the present study was to compare four methods of fixation in mandibular body fractures. Mechanical and photoelastic tests were performed using polyurethane and photoelastic resin mandibles, respectively. The study groups contained the following: (I), two miniplates of 2.0 mm; (II) one 2.0 mm plate and an Erich arch bar; (III) one 2.4 mm plate and an Erich arch bar, and (IV) one 2.0 mm plate and one 2.4 mm plate. The differences between the mean values were analyzed using Tukey's test, the Mann-Whitney test and the Bonferroni correction. Group II recorded the lowest resistance, followed by groups I, IV and III. The photoelastic test confirmed the increase of tension in group II. The 2.4 mm system board in linear mandibular body fractures provided more resistance and the use of only one 2.0 mm plate in the central area of the mandible created higher tension.

Proinflammatory Activity Of Primarily Infected Endodontic Content Against Macrophages After Different Phases Of The Root Canal Therapy.

This study investigated the presence of target bacterial species and the levels of endotoxins in teeth with apical periodontitis. Levels of inflammatory mediators (interleukin [IL]-1β and tumor necrosis factor [TNF]-α) were determined after macrophage stimulation with endodontic content after different phases of endodontic therapy using different irrigants. Thirty primarily infected root canals were randomly assigned into 3 groups according to the irrigant used for root canal preparation (n = 10 per group): GI: 2.5% sodium hypochlorite, GII: 2% chlorhexidine gel, and GIII (control group): saline solution. Root canal samples were taken by using paper points before (s1) and after root canal instrumentation (s2), subsequently to 17% EDTA (s3), after 30 days of intracanal medication (Ca[OH]2 + saline solution) (s4), and before root canal obturation (s5). Polymerase chain reaction (16S recombinant DNA) and limulus amebocyte lysate assay were used for bacterial and endotoxin detection, respectively. Macrophages were stimulated with the root canal contents for IL-1β/TNF-α measurement using enzyme-linked immunosorbent assay. Porphyromonas gingivalis (17/30), Porphyromonas endodontalis (15/30), and Prevotella nigrescens (11/30) were the most prevalent bacterial species. At s1, endotoxins were detected in 100% of the root canals (median = 32.43 EU/mL). In parallel, substantial amounts of IL-1β and TNF-α were produced by endodontic content-stimulated macrophages. At s2, a significant reduction in endotoxin levels was observed in all groups, with GI presenting the greatest reduction (P < .05). After a root canal rinse with EDTA (s3), intracanal medication (s4), and before root canal obturation (s5), endotoxin levels reduced without differences between groups (P < .05). IL-1β and TNF-α release decreased proportionally to the levels of residual endotoxin (P < .05). Regardless of the use of sodium hypochlorite or CHX, the greatest endotoxin reduction occurs after chemomechanical preparation. Increasing steps of root canal therapy associated with intracanal medication enhances endotoxin reduction, leading to a progressively lower activation of proinflammatory cells such as macrophages.

Development Plates For Stable Internal Fixation: Study Of Mechanical Resistance In Simulated Fractures Of The Mandibular Condyle.

To develop Y-shaped plates with different thicknesses to be used in simulated fractures of the mandibular condyle. Ten plates were developed in Y shape, containing eight holes, and 30 synthetic polyurethane mandible replicas were developed for the study. The load test was performed on an Instron Model 4411 universal testing machine, applying load in the mediolateral and anterior-posterior positions on the head of the condyle. Two-way ANOVA with Tukey testing with a 5% significance level was used. It was observed that when the load was applied in the medial-lateral plate of greater thickness (1.5 mm), it gave the highest strength, while in the anteroposterior direction, the plate with the highest resistance was of the lesser thickness (0.6 mm). A plate with a thickness of 1.5 mm was the one with the highest average value for all displacements. In the anteroposterior direction, the highest values of resistance were seen in the displacement of 15 mm. After comparing the values of the biomechanical testing found in the scientific literature, it is suggested that the use of Y plates are suitable for use in subcondylar fractures within the limitations of the study.

Clinical Influence Of Different Intracanal Medications On Th1-type And Th2-type Cytokine Responses In Apical Periodontitis.

This clinical study assessed the influence of different intracanal medications on Th1-type and Th2-type cytokine responses in apical periodontitis and monitored the levels of bacteria from primarily infection during endodontic procedures. Thirty primarily infected teeth were randomly divided into 3 groups according to the medication selected: chlorhexidine (CHX), 2% CHX gel; Ca(OH)2/SSL, Ca(OH)2 + SSL; and Ca(OH)2/CHX, Ca(OH)2 + 2% CHX gel (all, n = 10). Bacterial sample was collected from root canals, and the interstitial fluid was sampled from lesions. Culture techniques were used to determine bacterial counts (colony-forming units/mL). Th1 (tumor necrosis factor-α, interferon-γ, and interleukin [IL]-2) and Th2 cytokines (IL-4, IL-5, and IL-13) were measured by enzyme-linked immunosorbent assay. All intracanal medication protocols were effective in reducing the bacterial load from root canals (all P < .05) and lowering the levels of Th1-type cytokines in apical lesions (all P < .05), with no differences between them (P > .05). Both Ca(OH)2 treatment protocols significantly increased the levels of Th2-type cytokines (P < .05), with no differences between them (P > .05). Thus, chlorhexidine medication showed the lowest effectiveness in increasing the levels of Th2-type cytokine. After treatment, regardless of the type of medication, the linear regression analysis indicated the down-regulation of Th2-type cytokines by Th1-type cytokines. All intracanal medication protocols were effective in reducing bacterial load and lowering the levels of Th1-type cytokines. Thus, the use of Ca(OH)2 medications contributed to the increase in the Th2-type cytokine response in apical periodontitis.

Leaf Manganese Accumulation And Phosphorus-acquisition Efficiency.

Plants that deploy a phosphorus (P)-mobilising strategy based on the release of carboxylates tend to have high leaf manganese concentrations ([Mn]). This occurs because the carboxylates mobilise not only soil inorganic and organic P, but also a range of micronutrients, including Mn. Concentrations of most other micronutrients increase to a small extent, but Mn accumulates to significant levels, even when plants grow in soil with low concentrations of exchangeable Mn availability. Here, we propose that leaf [Mn] can be used to select for genotypes that are more efficient at acquiring P when soil P availability is low. Likewise, leaf [Mn] can be used to screen for belowground functional traits related to nutrient-acquisition strategies among species in low-P habitats.

Preparação de nanopartículas de prata e ouro: um método simples para a introdução da nanociência em laboratório de ensino

A new practical experiment involving silver and gold nanoparticle syntheses was introduced in an inorganic chemistry laboratory course for undergraduate students at the Institute of Chemistry, UNICAMP. The nanoparticles were synthesized by the reduction of silver nitrate and tetrachloroauric acid with sodium borohydride and sodium citrate in an aqueous medium. Stabilities of the suspensions were tested using several different reactants including sodium chloride, polyvinylpyrrolidone, polyvinyl alcohol and cistamine. Changes in optical properties were observed by electronic spectra and also by transmission electronic microscopy, which also yielded data for estimating particle size.

Cladistic analysis of Hemirhipini with establishment of Propalaus gen. nov. (Coleoptera, Elateridae, agrypninae)

This article includes a cladistic analysis of the tribe Hemirhipini. Are included 20 Hemirhipini genera (sensu Casari-Chen 1994), Saltamartinus Casari (1996b) (Hemirhipini), 6 genera excluded from Hemirhipini and kept in Agrypninae (formerly Pyrophorinae) (Casari-Chen 1993) and also, Aphileus Candèze (1857), Pyrophorus Billberg (1820) and Thoramus Sharp (1877). The type-species of the majority of genera and all species of the American genera (except Saltamartinus viduus (Chevrolat 1867)) are included. This analysis demonstrates that 30 genera belong to Hemirhipini: Abiphis Fleutiaux (1926), Alaolacon Candèze (1865), Alaomorphus Hauser (1900), Alaus Eschscholtz (1829), Aliteus Candèze (1857), Anthracalaus Fairmaire (1888), Aphileus Candèze (1857), Austrocalais Neboiss (1967), Calais Castelnau (1836), Catelanus Fleutiaux (1942), Chalcolepidius Eschscholtz (1829), Chalcolepis Candèze (1857), Conobajulus Van Zwaluwenburg (1940), Coryleus Fleutiaux (1942), Cryptalaus Ôhira (1967), Eleuphemus Hyslop (1921), Eumoeus Candèze (1874), Fusimorphus Fleutiaux (1942), Hemirhipus Latreille (1829), Lacais Fleutiaux (1942), Lycoreus Candèze (1857), Mocquerysia Fleutiaux (1899), Neocalais Girard (1971), Pherhimius Fleutiaux (1942), Phibisa Fleutiaux (1942), Propalaus gen. nov., Pseudocalais Girard (1971), Saltamartinus Casari (1996), Tetrigus Candèze (1857) and Thoramus Sharp (1877). The species included in Alaus do not make a monophyletic group and Propalaus gen. nov. is established to include Alaus alicii (Pjatakowa 1941) and A. haroldi (Candèze 1878). A description of Propalaus gen. nov. (type-species: Chalcolepidius haroldi Candèze, 1878) and a new key to Hemirhipini genera are also presented.

A phylogenetic study of the subtribe Dicrepidiina (Elateridae, Elaterinae, Ampedini)

It is presented a cladistic analysis of the Dicrepidiina aiming to test the monophyletism of the subtribe and to establish the relationships among the genera. The subtribe is composed by 36 genera and all of them, except Asebis, Lamononia, Neopsephus, Semiotopsis and Spilomorphus were included in the analysis. Fifty two species, especially the type-species of each genus were studied: Achrestus flavocinctus (Candèze, 1859), A. venustus Champion, 1895, Adiaphorus gracilis Schwarz, 1901, A. ponticerianus Candèze, 1859, Anoplischiopsis bivittatus Champion, 1895, Anoplischius bicarinatus Candèze, 1859, A. conicus Candèze, 1900, A. haematopus Candèze, 1859, A. pyronotus Candèze, 1859, Atractosomus flavescens (Germar, 1839), Blauta cribraria (Germar, 1844), Calopsephus apicalis (Schwarz, 1903), Catalamprus angustus (Fleutiaux, 1902), Crepidius flabellifer (Erichson, 1847), C. resectus Candèze, 1859, Cyathodera auripilosus Costa, 1968, C. lanugicollis (Candèze, 1859), C. longicornis Blanchard, 1843, Dayakus angularis Candèze, 1893, Dicrepidius ramicornis (Palisot de Beauvois, 1805), Dipropus brasilianus (Germar, 1824), D. factuellus Candèze, 1859, D. laticollis (Eschscholtz, 1829), D. pinguis (Candèze, 1859), D. schwarzi (Becker, 1961), Elius birmanicus Candèze, 1893, E. dilatatus Candèze, 1878, Heterocrepidius gilvellus Candèze, 1859, H. ventralis Guérin-Méneville, 1838, Lampropsephus cyaneus (Candèze, 1878), Loboederus appendiculatus (Perty, 1830), Olophoeus gibbus Candèze, 1859, Ovipalpus pubescens Solier, 1851, Pantolamprus ligneus Candèze, 1896, P. mirabilis Candèze, 1896, P. perpulcher Westwood, 1842, Paraloboderus glaber Golbach, 1990, Proloboderus crassipes Fleutiaux, 1912, Propsephus beniensis (Candèze, 1859), P. cavifrons (Erichson, 1843), Pseudolophoeus guineensis (Candèze, 1881), Rhinopsephus apicalis (Schwarz, 1903), Sephilus formosanus Schwarz, 1912, S. frontalis Candèze, 1878, Singhalenus gibbus Candèze, 1892, S. taprobanicus Candèze, 1859, Sphenomerus antennalis Candèze, 1859, S. brunneus Candèze, 1865, Spilus atractomorphus Candèze, 1859, S. nitidus Candèze, 1859, Stenocrepidius simonii Fleutiaux, 1891 and Trielasmus varians Blanchard, 1846. Chalcolepidius zonatus (Hemirhipini, Agrypninae), Ctenicera silvatica (Prosternini, Prosterninae), and species of the other subtribes of Ampedini (Elaterinae): Ampedus sanguineus (Ampedina), Melanotus spernendus (Melanotina) and Anchastus digittatus and Physorhinus xanthocephalus (Physorhinina) were used as outgroups. The results of the phylogenetic analysis demonstrated that Dicrepidiina, as formerly defined, does not form a monophyletic group. One genus, represented by Ovipalpus pubescens, was removed from the subtribe. The subtribe is characterized by presence of lamella under 2nd and 3rd tarsomeres of all legs. Also, it was revealed that the genera Achrestus, Anoplischius, Dipropus and Propsephus are not monophyletic. Due to the scarcity of information, all the studied species are redescribed and illustrated.

Notes on Population Dynamics of Amblyomma Ticks (Acari: Ixodidae) in Brazil

Previous population dynamics data, generated for Amblyomma parvum Aragao and Aniblyomma cajennense (Fabricius) in Argentina and southeastern Brazil, have indicated that these ticks complete I generation per year, with larvae predominating in autumn, nymphs in winter, and mostly adults during spring and summer. The present study reports population dynamics data for free-living Amblyomma spp. ticks in northern Brazil (Amazon forest, latitude 10 degrees S, 63 degrees W), and for Amblyomma spp. ticks collected oil birds in Southeastern Brazil (latitude 23 degrees S, 45 degrees W). In northern Brazil, adult ticks predominated from mid-spring to mid-autumn, larvae predominated in early winter, and nymphs from mid-winter to mid-spring. Seven Amblyomma spp. were identified, although A. cajannense predominated in I of the 2 sites sampled. In southeastern Brazil, larval infestations on birds peaked in autumn, followed by a nymphal infestation peak in late winter. At least 32% and 75% of these larvae and nymphs, respectively, were identified as Amblyomma longirostre (Koch). Similar to previous work, the present study showed that Amblyomma spp. larvae and nymphs predominated during autumn-winter months, and mostly adults during spring-summer months, a pattern compatible with 1 genration/yr, even at latitude 10 degrees S in northern Brazil.

Searching for Moniliophthora perniciosa pathogenicity genes

The basidiomycete Moniliophthora perniciosa is the causal agent of witches` broom disease of Theobroma cacao (cacao). Pathogenesis mechanisms of this hemibiotrophic fungus are largely unknown. An approach to identify putative pathogenicity genes is searching for sequences induced in mycelia grown under in vitro conditions. Using this approach, genes from M. perniciosa induced under limiting nitrogen and light were identified from a cDNA library enriched by suppression subtractive hybridization as potential putative pathogenicity genes. From the 159 identified unique sequences, 59 were annotated and classified by gene ontology. Two sequences were categorized as ""Defence genes, Virulence, and Cell response"" presumably coding for allergenic proteins, whose homologues from other fungi are inducers of animal or plant defences. Differential gene expression was evaluated by quantitative amplification of reversed transcripts (RT-qPCR) of the putative identified genes coding for the two allergenic proteins (Aspf13 and 88KD), and for the enzymes Arylsulfatase (AS); Aryl-Alcohol Oxidase; Aldo-Keto Reductase (AK); Cytochrome P450 (P450); Phenylalanine Ammonia-Lyase; and Peroxidase from mycelia grown under contrasting N concentrations. All genes were validated for differential expression, except for the putative Peroxidase. The same eight genes were analysed for expression in susceptible plants inoculated with M. perniciosa, and six were induced during the early asymptomatic stage of the disease. In infected host tissues, transcripts of 88KD and AS were found more abundant at the biotrophic phase, while those from Aspf13, AK, PAL, and P450 accumulated at the necrotrophic phase, enabling to suggest that mycelia transition from biotrophic to necrotrophic might occur earlier than currently considered. These sequences appeared to be virulence life-style genes, which encode factors or enzymes that enable invasion, colonization or intracellular survival, or manipulate host factors to benefit the pathogen`s own survival in the hostile environment. (C) 2010 The British Mycological Society. Published by Elsevier Ltd. All rights reserved.

Preparation and characterization of crosslinked resins containing ferrite particles

Micrometer-sized magnetic particles hosted on network material were successfully prepared by a simple chemical process (ion exchange followed by co-precipitation) from commercial styrene-divinylbenzene copolymers. Energy dispersive X-ray spectroscopy (EDS) coupled to scanning electron microscopy (SEM) allowed the observation of submicron particles. All the produced spherical beads have presented metallic particles (NiFe2O4, CuFe2O4, CoFe2O4, or MnFe2O4), either as isolated particles or agglomerates, located on their external and internal (within pores) The thermal stability of the composites, evaluated by thermogravimetric techniques, were found to be dependent on the amount of ferrite particles incorporated into them.

A proteomic approach to identifying proteins differentially expressed in conidia and mycelium of the entomopathogenic fungus Metarhizium acridum

Metarhizium spp. is an important worldwide group of entomopathogenic fungi used as an interesting alternative to chemical insecticides in programs of agricultural pest and disease vector control. Metarhizium conidia are important in fungal propagation and also are responsible for host infection. Despite their importance, several aspects of conidial biology, including their proteome, are still unknown. We have established conidial and mycelial proteome reference maps for Metarhizium acridum using two-dimensional gel electrophoresis (2-DE) and matrix-assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF MS). In all, 1130 +/- 102 and 1200 +/- 97 protein spots were detected in ungerminated conidia and fast-growing mycelia, respectively. Comparison of the two protein-expression profiles reveled that only 35 % of the protein spots were common to both developmental stages. Out of 94 2-DE protein spots (65 from conidia, 25 from mycelia and two common to both) analyzed using mass spectrometry, seven proteins from conidia, 15 from mycelia and one common to both stages were identified. The identified protein spots exclusive to conidia contained sequences similar to known fungal stress-protector proteins (such as heat shock proteins (HSP) and 6-phosphogluconate dehydrogenase) plus the fungal allergen Alt a 7, actin and the enzyme cobalamin-independent methionine synthase. The identified protein spots exclusive to mycelia included proteins involved in several cell housekeeping biological processes. Three proteins (HSP 90, 6-phosphogluconate dehydrogenase and allergen Alt a 7) were present in spots in conidial and mycelial gels, but they differed in their locations on the two gels. (c) 2010 The British Mycological Society. Published by Elsevier Ltd. All rights reserved.

Fungal tyrosine betaine, a novel secondary metabolite from conidia of entomopathogenic Metarhizium spp. fungi

Fungi, including the entomopathogenic deuteromycete Metarhizium anisopliae, produce a wide diversity of secondary metabolites that either can be secreted or stored in specific developmental structures, e.g., conidia. Some secondary metabolites, such as pigments, polyols and mycosporines, are associated with pathogenicity and/or fungal tolerance to several stress-inducing environmental factors, including temperature and solar radiation extremes. Extracts of M. anisopliae var. anisopliae (strain ESALQ-1037) conidia were purified by chromatographic procedures and the isolated compounds analyzed by (1)H and (13)C nuclear magnetic resonance spectroscopy and high-resolution mass spectrometry. LC-MS analyses were carried out to search for mycosporines (the initial targets), but no compounds of this class were detected. A molecule whose natural occurrence was previously undescribed was identified. It consists of betaine conjugated with tyrosine, and the structure was identified as 2-([1-carboxy-2-(4-hydroxyphenyl)ethyl]amino)-N,N,N-trimethyl-2-oxoethanammonium. mannitol was the predominant compound in the alcoholic conidial extract, but no amino acids other than tyrosine were found to be conjugated with betaine in conidia. The fungal tyrosine betaine was detected also in conidial extracts of three other M. anisopliae var. anisopliae (ARSEF 1095, 5626 and 5749) and three M. anisopliae var. acridum isolates (ARSEF 324, 3391 and 7486), but it was not detected in Aspergillus nidulans conidial extract (ATCC 10074). (C) 2010 The British Mycological Society. Published by Elsevier Ltd. All rights reserved.

Microsurgical Anatomy of the Posterior Cerebral Artery in Three-Dimensional Images

OBJECTIVE: To describe the microsurgical anatomy, branches, and anatomic relationships of the posterior cerebral artery (PCA) represented in three-dimensional images. METHODS: Seventy hemispheres of 35 brain specimens were studied. They were previously injected with red silicone and fixed in 10% formalin for at least 40 days. Four of the studied specimens were frozen at -10 degrees to -15 degrees C for 14 days, and additional dissection was done with the Klingler`s fiber dissection technique at x6 to x40 magnification. Each segment of the artery was measured and photographed to obtain three-dimensional stereoscopic images. RESULTS: The PCA origin was in the interpeduncular cistern at the pontomesencephalic junction level in 23 specimens (65.7%). The PCA was divided into four segments: P1 extends from the PCA origin to its junction with the posterior communicating artery with an average length of 7.7 mm; P2 was divided into an anterior and posterior segment. The P2A segment begins at the posterior communicating artery and ends at the most lateral aspect of the cerebral peduncle, with an average length of 23.6 mm, and the P2P segment extends from the most lateral aspect of the cerebral peduncle to the posterior edge of the lateral surface of the midbrain, with an average length of 16.4 mm; P3 extends from the posterior edge of the lateral surface of the midbrain and ends at the origin of the parieto-occipital sulcus along the calcarine fissure, with an average length of 19.8 mm; and the P4 segment corresponds to the parts of the PCA that run along or inside both the parieto-occipital sulcus and the distal part of the calcarine fissure. CONCLUSIONS: To standardize the neurosurgical practice and knowledge, surgical anatomic classifications should be used uniformly and further modified according to the neurosurgical experience gathered. The PCA classification proposed intends to correlate its anatomic segments with their required microneurosurgical approaches.