Myoelectric Signal Monitoring System

The Electromyography (EMG) is an important tool for gait analyzes and disorders diagnoses. Traditional methods involve equipment that can disturb the analyses, being gradually substituted by different approaches, like wearable and wireless systems. The cable replacement for autonomous systems demands for technologies capable of meeting the power constraints. This work presents the development of an EMG and kinematic data capture wireless module, designed taking into account power consumption issues. This module captures and converts the analog myoeletric signal to digital, synchronously with the capture of kinetic information. Both data are time multiplexed and sent to a PC via Bluetooth link. The work carried out comprised the development of the hardware, the firmware and a graphical interface running in an external PC. The hardware was developed using the PIC18F14K22, a low power family of microcontrollers. The link was established via Bluetooth, a protocol designed for low power communication. An application was also developed to recover and trace the signal to a Graphic User Interface (GUI), coordinating the message exchange with the firmware. Results were obtained which allowed validating the conceived system in static and with the subject performing short movements. Although it was not possible to perform the tests within more dynamic movements, it is shown that it is possible to capture, transmit and display the captured data as expected. Some suggestions to improve the system performance also were made.

Utilização de Cabos de alta Temperatura em linhas Aéreas em Média Tensão

A presente dissertação teve como objetivo fazer uma análise da viabilidade técnica da utilização dos condutores de alta temperatura nas linhas aéreas de MT, identificar vantagens, analisar inconvenientes, e estabelecer um comparativo a custos médios com as soluções convencionais. Foi efetuado o estudo de um caso real da EDP Distribuição que consistia na necessidade do aumento da capacidade de transporte de energia da linha aérea a 15 kV Espinho-Sanguedo. Neste foi ponderada a solução onde se poderia efetuar passagem de linha simples para linha dupla em alumínio-aço (AA) 160 mm2 ou a solução alternativa e inovadora de substituição dos condutores existentes por condutores de alta temperatura ACCC 182 mm2. Para isso foram efetuados cálculos e também criada uma ferramenta de apoio à decisão, para validação dos mesmos, com o intuito de mais tarde poder ser aplicada nas linhas aéreas em Média Tensão em todo o país e, sempre que necessário, se possa fazer um estudo de ponderação técnica de forma sistemática e estruturada. Neste trabalho estão identificadas as vantagens, foram relatados os inconvenientes, e estabeleceu-se um comparativo a custos médios da utilização de condutores de alta temperatura com as soluções convencionais. Antes de poder ser realizado um estudo do caso concreto da Linha aérea Espinho-Sanguedo foi necessário um aprofundamento do estado da arte no que diz respeito à comparação entre o cabo de alta temperatura ACCC e o cabo convencional ACSR, sendo este o mais utilizado nas linhas aéreas em MT. Os cabos de alta temperatura trouxeram inovações neste tema de transporte de energia, e como tal surgiu a necessidade de um estudo mais aprofundado da sua constituição, destacando o seu núcleo formado pelo compósito de fibra de carbono e fibra de vidro. Foi também analisado vantagens e desvantagens do cabo de alta temperatura e até mesmo situações onde a sua aplicação poderá ser vantajosa, de modo a tirar proveito das suas caraterísticas em que se destacam altas temperaturas de funcionamento e flechas reduzidas. Para elaborar um projeto de uma linha aérea em média tensão é necessário considerar a legislação em vigor, os aspetos ambientais e económicos, respeitando e garantindo as premissas do cálculo elétrico e mecânico. Economicamente este tipo de cabo (ACCC) é mais dispendioso do que os convencionais, no entanto o estudo realizado permitiu perceber que a sua implementação técnica é vantajosa em linhas aéreas de elevada capacidade de transporte de energia, sobretudo nos casos onde serão necessárias instalar linhas duplas ou linhas simples de seções elevadas. Devido às suas caraterísticas mecânicas, estes cabos permitem melhorar as linhas na sua dimensão, podendo diminuir o número de apoios a instalar, podendo diminuir a robustez dos apoios e permitir maior facilidade na montagem. Estas vantagens traduzem-se em menores impactos ambientais e permitem sobretudo reduzir os constrangimentos com os proprietários dos terrenos onde os apoios são implantados.

Desenvolvimento de uma rotina em Excel para Cálculo de Perdas de Pré-Esforço de acordo com EC2

O presente trabalho teve como objetivo o desenvolvimento de uma folha de cálculo em MS-Excel para cálculo de perdas de pré-esforço, utilizando rotinas programadas em Visual Basic. Neste relatório, após o capítulo introdutório onde são descritos os conceitos teóricos que sustentam o trabalho, descreve-se a aplicação desenvolvida e apresentam-se alguns exemplos de validação da mesma. A aplicação executa o cálculo das perdas de pré-esforço por pós-tensão e calcula a geometria do cabo, disponibilizando no final a representação gráfica das perdas para o cabo em estudo. Para além dos exemplos de validação referidos, são ainda apresentados os resultados obtidos por aplicação da folha de cálculo desenvolvida a uma situação real de projeto que surgiu durante a realização do estágio. A parte final do relatório é dedicada à apresentação das conclusões assim como a algumas sugestões para desenvolvimentos futuros.

Estudo de problemas de corrosão em cabos de aço zincado

As cablagens metálicas são aplicadas abundantemente na montagem dos automóveis, para accionamento de diversos dispositivos, tais como a abertura de portas, abertura da mala ou da tampa do motor, abertura do tampão do depósito de combustível, accionamento do travão de mão, etc. Nas cablagens metálicas utilizadas na indústria automóvel é comummente utilizado arame entrançado de aço zincado, o qual foi já estudado resistir à agressividade das condições em que habitualmente trabalham. No entanto, para que esta estabilidade de funcionamento exista, torna-se necessário que a qualidade do arame entrançado seja a mais adequada. O presente trabalho surgiu da necessidade de averiguar quais as razões que estariam por detrás do aparecimento de quantidades relativamente abundantes de Óxido de Zinco (ZnO) em cablagens metálicas utilizadas na indústria automóvel, poucas semanas depois do seu fabrico. O estudo foi levado a cabo com vista a satisfazer as necessidades de investigação deste problema por parte de uma empresa de cablagens metálicas instalada no nosso país, a FicoCables, estabelecendo quais as causas-raiz deste problema, com vista a poder evitálo no futuro. O trabalho foi concluído com sucesso, tendo-se averiguado que existiam lacunas graves de limpeza do cabo entre as operações de conformação do arame e de zincagem, com deposição de elementos potenciadores do Óxido de Zinco na interface, os quais viriam a revelar-se cruciais à posteriori, para a nucleação e desenvolvimento do Óxido de Zinco na superfície do cabo.

Kitchen robot prod. line development. Proj. of Bowden cables cutting and thermal forming machine.

This document presents particular description of work done during student’s internship in PR Metal company realized as ERASMUS PROJECT at ISEP. All information including company’s description and its structure, overview of the problems and analyzed cases, all stages of projects from concept to conclusion can be found here. Description of work done during the internship is divided here into two pieces. First part concerns one activities of the company which is robotic chefs (kitchen robot) production line. Work, that was done for development of this line involved several tasks, among them: creating a single-worker montage station for screwing robots housing’s parts, improve security system for laser welding chamber, what particularly consists in designing automatically closing door system with special surface, that protects against destructive action of laser beam, test station for examination of durability of heating connectors, solving problem with rotors vibrations. Second part tells about main task, realized in second half of internship and stands a complete description of machine development and design. The machine is a part of car handle latch cable production line and its tasks are: cutting cable to required length and hot-forming plastic cover for further assembly needs.

Juvenile Systemic Lupus Erythematosus in Portugal: Clinical and Immunological Patterns of Disease Expression in a Cohort of 56 Patients

Objective: To define the pattern of disease expression and to gain better understanding in patients with juvenile onset systemic lupus erythematosus (SLE) in Portugal. Methods: The features of unselected patients with systemic lupus erythematosus who had disease onset before the age of 18 years were retrospectively analysed in three Portuguese centres with Pediatric Rheumatology Clinic over a 24-year period (1987-2011). Demographic, clinical and laboratory manifestations, therapy and outcome were assessed. Results: A cohort of 56 patients with a mean age at disease onset of 12.6±4.04 years (mean±1SD) (range, 1.0-17.0 years) and a mean period of follow-up of 5.5±5.4 years. Forty six (82.1%) patients were female. The most common disease manifestations were musculoskeletal (87.5%), mucocutaneous (80.3%) and haematological abnormalities (75%). Lupus nephritis was diagnosed in 46.4% of patients and consisted of glomerular ne - phritis in all cases. Neuropsychiatric manifestations occurred in 21.4% but severe central nervous system complications were uncommon, as brain infarcts and organic brain syndrome in 4 (7.1%) patients. Antinuclear antibodies and anti-double stranded DNA were positive in most patients in (98.2% and 71.4% respectively), as well as low C3 and/or C4 were observed frequently (85.7%). Generally, most patients had a good response to therapy as demonstrated by a significant decreasing of SLEDAI score from disease presentation to the last evaluation. The SLEDAI at diagnosis, the maximum SLEDAI and the incidence of complications were significantly higher in patients with neurolupus and/or lupus nephritis. Therapy included oral steroids (87.5%), hydroxychloroquine (85.7%), azathioprine (55.4%), IV cyclophosphamide (28.6%) along with other drugs. Six (10.7%) patients were treated with rituximab. Long-term remission was achieved in 32%, disease was active in 68%, adverse reactions to therapy occurred in 53.6% and complications/severe manifestations in 23.2%. Two patients died, being active disease and severe infection the causes of death. Conclusions: This study suggests that in our patients the clinical and laboratory features observed were similar to juvenile systemic lupus erythematosus patients from other series. Clinical outcome was favourable in the present study. Complications from therapy were frequent. Objective: To define the pattern of disease expression and to gain better understanding in patients with juvenile onset systemic lupus erythematosus (SLE) in Portugal. Methods: The features of unselected patients with systemic lupus erythematosus who had disease onset before the age of 18 years were retrospectively analysed in three Portuguese centres with Pediatric Rheumatology Clinic over a 24-year period (1987-2011). Demographic,clinical and laboratory manifestations, therapy and outcome were assessed. Results: A cohort of 56 patients with a mean age at disease onset of 12.6±4.04 years (mean±1SD) (range, 1.0-17.0 years) and a mean period of follow-up of 5.5±5.4 years. Forty six (82.1%) patients were female. The most common disease manifestations were musculoskeletal (87.5%), mucocutaneous (80.3%) and haematological abnormalities (75%). Lupus nephritis was diagnosed in 46.4% of patients and consisted of glomerular ne - phritis in all cases. Neuropsychiatric manifestations occurred in 21.4% but severe central nervous system complications were uncommon, as brain infarcts and organic brain syndrome in 4 (7.1%) patients. Antinuclear antibodies and anti-double stranded DNA were positive in most patients in (98.2% and 71.4% respectively), as well as low C3 and/or C4 were observed frequently (85.7%). Generally, most patients had a good response to therapy as demonstrated by a significant decreasing of SLEDAI score from disease presentation to the last evaluation. The SLEDAI at diagnosis, the maximum SLEDAI and the incidence of complications were significantly higher in patients with neurolupus and/or lupus nephritis. Therapy included oral steroids (87.5%), hydroxychloroquine (85.7%), azathioprine (55.4%), IV cyclophosphamide (28.6%) along with other drugs. Six (10.7%) patients were treated with rituximab. Long-term remission was achieved in 32%, disease was active in 68%, adverse reactions to therapy occurred in 53.6% and complications/severe manifestations in 23.2%. Two patients died, being active disease and severe infection the causes of death. Conclusions: This study suggests that in our patients the clinical and laboratory features observed were similar to juvenile systemic lupus erythematosus patients from other series. Clinical outcome was favourable in the present study. Complications from therapy were frequent.

Warm Antibody Autoimmune Haemolytic Anaemia Associated with Ovarian Teratoma

The ovarian cystic teratoma is a rare cause of autoimmune haemolytic anaemia by warm antibodies, resistant to corticotherapy, with few case reports published in the medical literature. We present a case of a 45-year-old woman admitted to hospital due to general weakness. Laboratory studies revealed macrocytic anaemia, biochemical parameters of haemolysis and peripheral spherocytosis. The direct Coombs test was positive. Viral serologies, anti-nuclear antibodies, anti-double-stranded DNA antibodies and β2-microglobulin were negative. CT scan of the thorax, abdomen and pelvis showed a heterogeneous right anexial lesion. The patient was treated with corticotherapy without improvement of anaemia. Regression of extra-vascular haemolysis and normalisation of haemoglobin was obtained only after laparoscopic splenectomy and right ooforectomy, and the histopathology of the right anexial mass revealed a cystic teratoma. Previously published cases controlled the haemolysis by surgically removing the lesion associated with splenectomy.

Gain-of-Function Mutations in IFIH1 Cause a Spectrum of Human Disease Phenotypes Associated with Upregulated Type I Interferon Signaling

The type I interferon system is integral to human antiviral immunity. However, inappropriate stimulation or defective negative regulation of this system can lead to inflammatory disease. We sought to determine the molecular basis of genetically uncharacterized cases of the type I interferonopathy Aicardi-Goutières syndrome, and of other patients with undefined neurological and immunological phenotypes also demonstrating an upregulated type I interferon response. We found that heterozygous mutations in the cytosolic double-stranded RNA receptor gene IFIH1 (MDA5) cause a spectrum of neuro-immunological features consistently associated with an enhanced interferon state. Cellular and biochemical assays indicate that these mutations confer a gain-of-function - so that mutant IFIH1 binds RNA more avidly, leading to increased baseline and ligand-induced interferon signaling. Our results demonstrate that aberrant sensing of nucleic acids can cause immune upregulation.

EDP InovCity: Electricity feedback with smart meters through tv

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Mutational Analysis of Portuguese Families with Multiple Endocrine Neoplasia Type 1 Reveals Large Germline Deletions

OBJECTIVE: To determine the spectrum of MEN1 mutations in Portuguese kindreds, and identify mutation-carriers. PATIENTS, DESIGN AND RESULTS: Six unrelated MEN1 families were studied for MEN1 gene mutations by single-strand conformational polymorphism (SSCP) and DNA sequence analysis of the coding region and exon-intron boundaries of the MEN1 gene. These methods identified 4 different heterozygous mutations in four families: two mutations are novel (mt 1539 delG and mt 655 ims 11 bp) and two have been previously observed (mt 735 del 46p and mt 1656 del C) all resulting in a premature stop codon. In the remaining two families, in whom no mutations or abnormal MEN1 transcripts were detected, segregation studies of the 5' intragenic marker D11S4946 and codon 418 polymorphism in exon 9 revealed two large germline deletions of the MEN1 gene. Southern blot and tumour loss of heterozygosity analysis confirmed and refined the limits of these deletions, which spanned the MEN1 gene at least from: exon 7 to the 3' untranslated region, in one family, and the 5' polymorphic site D11S4946 to exon 9 (obliterating the initiation codon), in the other family. Twenty-six mutant-gene carriers were identified, 6 of which were asymptomatic. CONCLUSIONS: These results emphasize the importance of the detection of MEN1 germline deletions in patients who do not have mutations of the coding region. Important clues indicating the presence of such deletions may be obtained by segregation studies using the intragenic polymorphisms D11S4946 and at codon 418. The detection of these mutations will help in the genetic counselling of clinical management of the MEN1 families in Portugal.

Design of future distribution grids

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Functional and structural studies of two enzymes: membrane bound kinase and Z-DNA/Z-RNA-binding protein

Dissertação para obtenção do Grau de Doutor em Sistemas de Bioengenharia

Vodafone - Kabel Deutschland Merger

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

Wound Healing: a genetic approach in Drosophila

The wound healing response is an essential mechanism to maintain the integrity of epithelia and protect all organisms from the surrounding milieu. In the “purse-string” mechanism of wound closure, an injured epithelial sheet cinches its hole closed via an intercellular contractile actomyosin cable.(...)

Contratos de prestação de serviços de comunicações electrónicas

The object of this dissertation is the analysis of the legal framework applicable to contracts for provision of electronic communications services, while trying to offer solutions to some of the issues regarding this matter. The main focus of this study will be the rules concerning service’s suspension, which have been recently amended. The technological development and the establishment of these services as information transmitters and work tools were noteworthy for its growing importance at the present time. These services include cable television, telephone (landline and mobile) and internet and they are regulated by Law nr 23/96, July 26th, along with other essential public services. Said law sets a group of principles and duties, such as good faith (article 3), continuity and quality of the service (article 7) and the duty to rightfully inform the user (article 4), in order to protect the users. For the analysis of legal framework applicable to these particular contracts it is also fundamental to mention Law nr 5/2004, February 10th, known as Electronic Communications Law. The provisions regarding the service’s suspension are currently prescribed in articles 52.º and 52.º-A of the law. Given the amendments introduced by Law nr 10/2013, January 28th, consumers are subjected to a regulation different from the one applicable to the other users, established in the new article 52.º-A. From our analysis, we have concluded that the main change from past provisions has to do with the automatic termination of the contract as consequence of the consumer’s failure to pay the price or to conclude a written payment arrangement after service’s suspension.