Use of the aquatic protozoa to formulate a community biotic index for an urban water system

Protozoan were collected from 16 stations in water system of Changde City (China) using the PFU method. Sampling programs were conduced on a yearly basis, with seasonal frequency at diverse sites in the water system and 488 species of protozoa was identified. At the same time, Water sampling from these stations was conducted and various water chemical parameters, including DO, COD, BOD5, NH3, TP, and Volatile Phenol, were analyzed. The aim of the research was, on one hand, using chemical method to take an investigation to the water pollution status of Changde City; on the other hand, using protozoan to make an evaluation to the water quality. With the chemical water parameters and protozoa data, a biotic index was derived for the investigated region. The species pollution value (SPV) of 469 protozoa species was established, and the community pollution value (CPV) calculated from SPV was used to evaluate water quality. The method of the biotic index was tested and the result showed that CPV calculated from SPV had a close correlation with the degree of water pollution (p < 0.00001). This indicated that the method of the biotic index is reliable. The water quality degrees divided by CPV were suggested. (c) 2004 Elsevier B.V. All rights reserved.

Application and validation of a new biotic index using data from several water systems

Protozoans of Lake Donghu were collected from five stations using the PFU method. The sampling was conducted for one year and two times a month. The aim of this research was to test the applicability of a new protozoa biotic index, species pollution value (SPV) and community pollution value (CPV), established by the authors using data from the River Hanjiang. Each station's CPV was calculated from the SPV and the correlation analysis between the CPV and the comprehensive chemical index of stations I, II, III showed a significant correlation between them. The pollution status of the five stations was correctly evaluated by the CPV. These results suggested that the biotic index could be applied in water systems other than the River Hanjiang. The SPV of some protozoa species in Lake Donghu, not observed in the River Hanjiang were established. In order to further test the applicability of the biotic index, protozoan and chemistry data from the Rivers Torrente Stirone and Parma of Italy were used. The results showed that the CPV for the two rivers had a close relationship with the chemical water quality, which indicated that the biotic index could be applied in other parts of the world for the monitoring and estimating of water quality. Since the results of testing and verifying the biotic index in some other water systems in China were also satisfactory, this indicated that the biotic index has an extensive suitability for freshwater ecosystems. As long as more than 50% of the species in a sample have a SPV, the CPV calculated from the SPV is reliable for monitoring and evaluating water quality.

Design and operation of integrated pilot-scale dimethyl ether synthesis system via pyrolysis/gasification of corncob

The integrated pilot-scale dimethyl ether (DME) synthesis system from corncob was demonstrated for modernizing utilization of biomass residues. The raw bio-syngas was obtained by the pyrolyzer/gasifier at the yield rate of 40-45 Nm(3)/h. The content of tar in the raw bio-syngas was decreased to less than 20 mg/Nm(3) by high temperature gasification of the pyrolysates under O-2-rich air. More than 70% CO2 in the raw bio-syngas was removed by pressure-swing adsorption unit (PSA). The bio-syngas (H-2/CO approximate to 1) was catalytically converted to DME in the fixed-bed tubular reactor directly over Cu/Zn/Al/HZSM-5 catalysts. CO conversion and space-time yield of DME were in the range of 82.0-73.6% and 124.3-203.8 kg/m(cat)(3)/h, respectively, with a similar DME selectivity when gas hourly space velocity (GHSV, volumetric flow rate of syngas at STP divided by the volume of catalyst) increased from 650 h(-1) to 1500 h(-1) at 260 degrees C and 4.3 MPa. And the selectivity to methanol and C-2(+) products was less than 0.65% under typical synthesis condition. The thermal energy conversion efficiency was ca. 32.0% and about 16.4% carbon in dried corncob was essentially converted to DME with the production cost of ca. (sic) 3737/ton DME. Cu (111) was assumed to be the active phase for DME synthesis, confirmed by X-ray diffraction (XRD) characterization.

Vacuum pyrolysis of waste tires with basic additives

Granules of waste tires were pyrolyzed tinder vacuum (3.5-10 kPa) conditions, and the effects of temperature and basic additives (Na2CO3, NaOH) on the properties of pyrolysis were thoroughly investigated. It was obvious that with or without basic additives, pyrolysis oil yield increased gradually to a maximum and subsequently decreased with a temperature increase from 450 degrees C to 600 degrees C, irrespective of the addition of basic additives to the reactor. The addition of NaOH facilitated pyrolysis dramatically, as a maximal pyrolysis oil yield of about 48 wt% was achieved at 550 degrees C without the addition of basic additives, while a maximal pyrolysis oil yield of about 50 wt% was achieved at 480 degrees C by adding 3 wt% (w/w, powder/waste tire granules) of NaOH powder. The composition analysis of pyrolytic naphtha (i.b.p. (initial boiling point) similar to 205 degrees C) distilled from pyrolysis oil showed that more dl-limonene was obtained with basic additives and the maximal content of dl-limonene in pyrolysis oil was 12.39 wt% which is a valuable and widely-used fine chemical. However, no improvement in pyrolysis was observed with Na2CO3 addition. Pyrolysis gas was mainly composed of H-2, CO, CH4, CO2, C2H4 and C2H6. Pyrolytic char had a surface area comparable to commercial carbon black, but its proportion of ash (above 11.5 wt%) was much higher.

Gasoline-range hydrocarbon synthesis over cobalt-based Fischer-Tropsch catalysts supported onSiO2/HZSM-5

Two types of SiO2 with different mesopore size and HZSM-5 zeolite were used to prepare hybrid supported cobalt-based catalysts. The textual and structural properties of the catalysts were studied using N-2 physisorption, X-ray diffraction (XRD), and H-2 temperature-programmed reduction (TPR) techniques. Fischer-Tropsch synthesis (FTS) performances of the catalysts were carried out in a fixed-bed reactor. The combination effects of the meso- and micropores of the supports as well as the interaction between supports and cobalt particles on FTS activity are discussed. The results indicate that the catalyst supported on the tailor-made SiO2 and HZSM-5 hybrid maintained both meso- and micropore pores during the preparation process without HZSM-5 particles agglomerating. The mesopores provided quick mass transfer channels, while the micropores contributed to high metal dispersion and accelerated hydrocracking/hydroisomerization reaction rate. High CO conversion of 83.9% and selectivity to gasoline-range hydrocarbons (C-5-C-12) of 55%, including more than 10% isoparaffins, were achieved simultaneously on this type of catalyst.

Hydrogen-rich gas production from biomass air and oxygen/steam gasification in a downdraft gasifier

Biomass gasification is an important method to obtain renewable hydrogen, However, this technology still stagnates in a laboratory scale because of its high-energy consumption. In order to get maximum hydrogen yield and decrease energy consumption, this study applies a self-heated downdraft gasifier as the reactor and uses char as the catalyst to study the characteristics of hydrogen production from biomass gasification. Air and oxygen/steam are utilized as the gasifying agents. The experimental results indicate that compared to biomass air gasification, biomass oxygen/steam gasification improves hydrogen yield depending on the volume of downdraft gasifier, and also nearly doubles the heating value of fuel gas. The maximum lower heating value of fuel gas reaches 11.11 MJ/ N m(3) for biomass oxygen/steam gasification. Over the ranges of operating conditions examined, the maximum hydrogen yield reaches 45.16 g H-2/kg biomass. For biomass oxygen/steam gasification, the content of H-2 and CO reaches 63.27-72.56%, while the content Of H2 and CO gets to 52.19-63.31% for biomass air gasification. The ratio of H-2/CO for biomass oxygen/steam gasification reaches 0.70-0.90, which is lower than that of biomass air gasification, 1.06-1.27. The experimental and comparison results prove that biomass oxygen/steam gasification in a downdraft gasifier is an effective, relatively low energy consumption technology for hydrogen-rich gas production.

APOBEC3G 多重转录本的发现和部分表达特征的研究

APOBEC3G（apolipoprotein B mRNA-editing enzyme catalytic polypeptide-like 3G，载脂蛋白B mRNA编辑酶催化多肽样蛋白3G，简称为A3G）是2002年Sheehy 发现的天然抗病毒限制因子，代表近年来病毒研究领域的一项重大进展,不仅拓 展了对病毒宿主相互作用的认识,也为研发抗病毒药提供了新的思路和方向。不 过，A3G的结构、功能和抗病毒机制仍有许多未解的重大问题，进一步深入和系 统的研究，可能为预防和治疗HIV/AIDS及多种病毒性疾病，提供新的线索。 本研究的最初线索，来源于前期工作中的偶然发现：我们试图在一个健康个 体PBMC 中克隆A3G 编码序列，经双向测序后发现，有5 个位点属非同义突变， 造成氨基酸序列的改变。为排除个体差异并出于研究的便利，我们采用单核样细 胞系THP-1，进行多条序列的克隆和分析。在研究中，我们使用错误率仅为 1.6x10-6 的高保真酶Pfu，共克隆到23 条A3G 基因编码序列。经双向测序和对比 分析，较为意外地发现，其中20 条序列具有2 个以上的非同义突变或截断错位， 突变率高达87%，显示A3G 基因在THP-1 细胞中存在多重正常或变异的转录本。 这一现象，是否代表天然突变的普遍性以及其频度和意义，有待于进一步在多种 细胞和人群多个个体中验证和大规模的系统研究。 为建立基本的实验体系和研究手段，我们通过RT-PCR 与Western blotting， 检测了A3G 基因在9 个细胞系内的本底表达水平，并在此筛选结果的基础上， 在低本底的细胞系中，以慢病毒系统表达A3G 基因，而在高本底细胞系中，通 过siRNA 沉默A3G 基因，建立了A3G 高低表达体系，为后续研究A3G 功能提 供了方便可行的实验平台。 我们选取野生型A3G、带有3 个位点（H186R、I309T、F310S）连锁的突 变体和5 个位点（W34R、Y222H、V224G、A246V、F289L）非连锁的突变体， 构建真核表达载体，转染HEK293T 细胞，对比观察不同转录本在细胞中的表达 动态和水平。结果发现，3 个位点的突变对A3G 蛋白细胞内定位无明显影响，5 个位点的突变明显增加了单个细胞中A3G 蛋白点灶状团块的比例。并且突变位 点明显减缓了A3G 的表达速率，降低了表达水平。而连锁、非连锁以及截断错 位的突变体在抗病毒功能和结构生物学上的意义，有待于进一步的深入分析。 综上，我们发现A3G 在THP-1 细胞中存在多重转录本，并在确定细胞系A3G 本底表达的基础上，建立了A3G 体外高低表达体系，为后续我们进一步研究 A3G 的功能奠定了基础。而部分突变体在细胞内的表达趋势和细胞内定位的观 察和分析，为进一步的深入研究提供了新的线索。

姚虻唾液腺三类抗血栓活性蛋白的结构和功能研究

血栓栓塞性疾病严重影响人类的健康，是导致死亡率最高的病因之一。在过去 的几十年中，已经开发了针对血液凝固、血小板激活和聚集、血栓溶解的不同步骤而 起作用的基础和临床药物，但是许多抗血栓药物经常被包括低血压、出血等系统性的 副作用所限制，因此，需要开发新型的更具潜力和特异性的抗血栓药物。 吸血节肢动物与宿主相互作用的分子机制研究是目前国际研究的热点之一，通过 该类研究可以发现大量的具有药用前景的先导分子和提供节肢动物控制策略。我们通 过生物化学、分子生物学以及药理学研究手段首次从中国特有的姚虻（Tabanus yao Macquart）唾液腺发现了同时具有水解纤维蛋白原和抑制血小板聚集的双功能的 丝氨酸蛋白酶Tablysin、纤维蛋白水解酶TY6和腺苷三磷酸双磷酸酶Tabapy等3个家 族的抗血栓活性成分。并研究了这3类因子在牛虻唾液腺中的分子多样性、它们的结 构基础及发挥抗血栓功能的作用机制，通过实验动物模型研究体内外抗血栓能力，深 入解析了牛虻作为传统抗血栓中药的物质基础，为发掘具有良好抗血栓功能的新型候 选药物分子，为传统活血化瘀中药牛虻的现代化开发提供了广阔的思路和打下了坚实 的基础。 研究表明，姚虻纤维蛋白原水解酶Tablysin为一种单链蛋白。其表观分子量为 27kDa。此酶为一种丝氨酸蛋白酶家族的新成员，其活性不受金属离子螯合剂EDTA 和还原剂DTT的影响。血浆蛋白酶抑制剂Aprotinin，α-macroglobulin能部分抑制该 酶活性。此酶适应的pH范围较广（pH 2.4-10.0），但对热变化不具很好的耐受性。 Edman降解法进行氨基酸测序分析发现，此酶的N-末端有封闭现象，后经Q-TOF质 谱分析，确定此酶的部分氨基酸序列。此外，我们成功构建了具有完整性的姚虻唾液 腺cDNA文库，获得2×106 pfu个重组子，进一步的筛选了Tablysin的编码基因。 对此酶的溶栓机制进行分析发现，其具有直接水解纤维蛋白原的活性，不具有纤 溶酶原激活剂的活性。此酶能明显地水解纤维蛋白原的α-链，而对β-链的水解活性较 低，不能水解γ链（α > β > γ）。此酶不能有效地水解纤维蛋白，不会水解层粘连蛋白 （Laminin）和纤维粘连蛋白（Fibronectin）等基质蛋白。不具有出血活性。进 一步探讨此酶的作用机制，发现其能以剂量依赖的方式抑制ADP诱导的血小板聚 集。利用流式细胞仪检测到该酶能与血小板膜糖蛋白受体GPIIb / IIIa结合，因此推测其可能是通过抑制血小板和纤维蛋白原结合的作用机制来抑制血小板 的聚集。 我们通过将目的基因连接到pET-32a+载体，并在大肠杆菌表达体系中得到 了高效表达。体外活性检测表明重组蛋白质与天然产物活性相当，用其检测了 其对角叉菜胶致小鼠尾静脉血栓模型体内血栓形成的影响， 实验结果表明 Tablysin具有明显的抗静脉血栓作用。该工作对有潜力开发成为新型单组分抗血栓 药物的姚虻活性蛋白进行了较为系统的理化性质研究，为该分子的进一步开发和研究 奠定了基础。 我们从姚虻唾液腺中分离纯化到一组具有水解纤维蛋白原α-链活性的酶， 命名为TY6家族。对TY6的生化性质进行研究，表明此酶为一种单链的丝氨酸蛋白 酶，其表观分子量为27 kDa，其活性不受金属离子螯合剂EDTA的影响，但能被PMSF 所抑制。Molish反应显示为阴性，说明此酶不是一种糖蛋白。从姚虻唾液腺cDNA 文库中克隆得到其编码序列，发现该酶家族的编码基因在一级结构上表现出丰 富的多样性。通过Western blotting检测到其能与牛虻叮咬后过敏患者血清特异性IgE 结合。推测该基因的多样性是吸血昆虫适应吸血寄生生活而采取的进化策略。 该工作为牛虻唾液腺抗血栓功能基因的继续筛选和分析奠定了基础，并为牛虻的生物 防治提供了思路和对策。 我们从姚虻唾液腺中分离纯化到一个具有水解ADP活性的酶（Apyrase）， 命名为Tabapy。活性检测发现Tabapy具有明显的水解ADP的活性，并能以剂量 依赖的方式抑制ADP诱导的血小板聚集。通过Western blotting检测到Tabapy能与 牛虻叮咬后过敏患者血清特异性IgE结合。用PCR方法从姚虻唾液腺cDNA文库中 克隆得到编码序列，经BLAST分析表明，该酶与来源于斑虻唾液腺的血小板聚 集抑制剂Chrysoptin具有90％的序列相似性，并经过Q-TOF分析确证，有5个肽段 的氨基酸残基与该cDNA序列推导的多肽链匹配。该工作为研究吸血节肢动物 吸血生理及进一步研究Apyrase的结构和功能打下了基础。