A laboratory experiment, based on the maillard reaction, conducted as a project in introductory statistics

A simple laboratory experiment, based on the Maillard reaction, served as a project in Introductory Statistics for undergraduates in Food Science and Technology. By using the principles of randomization and replication and reflecting on the sources of variation in the experimental data, students reinforced the statistical concepts and techniques introduced to them in lectures before the experiment. The experiment was run simultaneously by several student groups, using the same materials. Comparing the results of their analyses of variance, students became aware of the difference between P values and significance levels in making statistical decisions. In the experiment, the complete randomized design was applied; however, it is easy to adjust the experiment to teach students simple regression and randomized block designs.

Career development: A project for the 21st century

This article reports of the papers present at the International Symposium 2006 'Shaping the future: connecting career development and workforce development'. The International Symposium 2006 provided an opportunity to move the project forward by considering career development in relation to the workforce development issues of human capital, labour supply, employability skills and older workers. In addition to these specific issues, it examined the broader issues of how career development services might contribute to workforce development and the career development information base needed to support public policy making. By way of background to this special issue on the International Symposium 2006, this paper briefly examines the context and the reasons behind career development's rise to a more prominent position on the public policy arena. Following this, the process of the International Symposium 2006 that resulted in the writing of the documents contained in the special issue are briefly outlined.

Using measurement data in a TSPSM project

One of the challenges for software engineering is collecting meaningful data from industrial projects. Software process improvement depends on measurement to provide baseline status and confirming evidence of the effect of process changes. Without data, any conclusions rely on intuition and guessing. The Team Software ProcessSM (TSPSM) provides a powerful framework for data collection and analysis, in addition to its primary goal as a basis for highly effective software development. In this paper, we describe the experiences of, and benefits realized by, a team using the TSP for the first time. By reviewing how this particular team collected and used data, we show features of the TSP that make it a powerful foundation for software process improvement.

The engineering link project: Learning about engineering by becoming an engineer

There has been a greater emphasis over the past few years of encouraging high school students to take up engineering as a career. This is due to a greater need for engineers in society, particularly in areas that are suffering a skills shortage. Both the engineering profession and universities across Australia have moved to address this shortage, with a proliferation of engineering outreach activities and programs the result. The Engineering Link Group (TELG) began the Engineering Link Project (ELP) over a decade ago with a focus on helping motivated high school students make an informed choice about engineering as a career. It also aimed at encouraging more high school students to study maths and science at high school. From the start the ELP was designed so that the students became engineers, rather than just hear from or watch engineers. Real working engineers pose problems to groups of students for them solve over the course of a day. In this way, students experience what it is like to be an engineer. It has been found that the project does help high school students make more informed career choices about engineering. The project also gave the students real life and practical reasons for studying sciences and mathematics at high school. © 2005, Australasian Association for Engineering Education

Future Engineers Australia Management Project: Turning high school students into engineering entrepreneurs

There has been a strong move towards entrepreneurial education in high schools and at universities over the past few years. This has been echoed by a call from state governments around Australia to promote enterprise thinking and education in high schools. It also parallels the push within engineering to learn across the traditional boundaries , particularly between engineering and business. To meet this call, The Engineering Link Group (TELG) developed the Future Engineers Australia Management Project (FEAMP) in 2003. The project is based around Enterprise Education, and was inspired by the Smallpeice Year 12 Engineering Management course in the UK. The idea was to take high school students in years 11 and 12 and turn them into ‘engineering entrepreneurs’. This paper presents the design, development and evaluation of FEAMP as a five day residential course for year 11 and 12 students who want to learn more about being entrepreneurs and managers. It is a hands-on activity where the students invent, develop and sell an engineering concept to venture capitalists and ultimately to customers at a trade fair. It has been run successfully for two years, going from strength to strength. © 2005, Australasian Association for Engineering Education

Can we get General Practitioners to Promote Physical Activity? Results of the 10,000 Steps Rockhampton Community-Based Physical Activity Promotion Project

Evidence supporting the efficacy of physical activity promotion in primary care settings has evaluated patient-level changes in physical activity, with little focus on the issue of general practitioner (GP) uptake. The 'GP Strategy' of 10,000 Steps Rockhampton provided an opportunity to explore this issue in the context of a multi-strategy, community-based physical activity intervention project. The 'GP Strategy' was developed in partnership with the Capricornia Division of General Practice. It aimed to: 1) increase GP awareness of the 10,000 Steps project, 2) upskill GPs in brief physical activity counselling techniques, and 3) provide GPs with evidencebased physical activity counselling materials and pedometers. The evaluation, which was guided by the RE-AIM evaluation framework, used a pre-post design, including a GP mailed survey, and collection of process data. Survey response rates were 67% (n=44/66; baseline) and 70% (n=37/53; 14-month follow-up). GP awareness of 10,000 Steps Rockhampton increased from 46% to 97%. 21/23 practices were visited by 10,000 Steps staff and accepted 10,000 Steps posters, brochures, and pedometers. At follow-up, 78% had displayed the poster, 81% were using the brochures, and 70% had loaned pedometers to patients. Despite the very high rate of uptake and use of 10,000 Steps materials, there was no change in the percentage of patients counselled, and relatively few pedometers had been loaned to patients. The results of this trial indicate that it will take more effort to change GP physical activity counselling behaviour, and provide only modest support for use of pedometers in the busy general practice setting. Acknowledgement:This project is supported by a grant from Health Promotion Queensland.

Managing healthcare quality in project management framework

Healthcare professionals routinely deploy various quality management tools and techniques in order to improve performance of healthcare delivery. However, they are characterised by fragmented approach i.e., they are not linked with the strategic intent of the organisation. This study introduces a holistic quality improvement method, which integrates all quality improvement projects with the strategic intent of the healthcare organisations. It first identifies a healthcare system and its environment. The Strengths, Weaknesses, Opportunities and Threats (SWOT) of the system are then derived with the involvement of the concerned stakeholders. This leads to developing the strategies in order to satisfy customers in line with the organisation's competitive position. These strategies help identify a few projects, the implementation of which ensures achievement of desired quality. The projects are then prioritised with the involvement of the concerned stakeholders and implemented in order to improve the system performance. The effectiveness of the method has been demonstrated using a case study of an intensive care unit at the Eric Williams Medical Sciences Complex Hospital in Trinidad. Copyright © 2007 Inderscience Enterprises Ltd.

"High commitment" strategies:it ain't what you do; it's the way that you do it

Purpose: This paper sets out to contribute to the advancement of knowledge, particularly with regard to the processes of implementation and the role of managers engaged in such high commitment strategies and work practices. Design/methodology/approach: This study is part of a research project investigating the extent to which employee involvement predicts job performance (as well as job satisfaction, wellbeing and organisational commitment) in the NHS, using both quantitative and qualitative methods. The main focus of this paper is to present evidence from four of the 20 case studies to show the barriers to implementing employee involvement as well as highlighting the techniques and practices that have proven to be most successful. Findings: Employee involvement is used successfully by management and has enabled frontline staff to contribute their knowledge to their work. Research limitations/implications: The ethical issues of confidentiality and anonymity permeated the research process throughout. Practical implications: The link between "high commitment" strategies and organisational performance is of great interest to academics and practitioners alike. One of these "high commitment" strategies, namely employee involvement, has been an important HR strategy for the NHS in the UK. Originality/value: Other organisations can learn from the findings by implementing the successful parts. © Emerald Group Publishing Limited.

Addressing the project implementation challenges in the Saudi Arabian power supply industry: an investigative approach towards improving project delivery

For many decades, the Kingdom of Saudi Arabia has been widely known for being a reliable oil exporter. This fact, however, has not exempted it from facing significant domestic energy challenges. One of the most pressing of these challenges involves bridging the widening electricity supply-demand gap where, currently, the demand is growing at a very fast rate. One crucial means to address this challenge is through delivering power supply projects with maximum efficiency. Project delivery delay, however, is not uncommon in this highly capital-intensive industry, indicating electricity supplies are not coping with the demand increases. To provide a deeper insight into the challenges of project implementation and efficient practice, this research adopts a pragmatic approach by triangulating literature, questionnaires and semi-structured interviews. The research was conducted in the Saudi Arabian power supply industry – Western Operating Area. A total of 105 usable questionnaires were collected, and 28 recorded, semi-structured interviews were conducted, analysed and synthesised to produce a conceptual model of what constitutes the project implementation challenges in the investigated industry. This was achieved by conducting a comprehensive ranking analysis applied to all 58 identified and surveyed factors which, according to project practitioners in the investigated industry, contribute to project delay. 28 of these project delay factors were selected as the "most important" ones. Factor Analysis was employed to structure these 28 most important project delay factors into the following meaningful set of 7 project implementation challenges: Saudi Electricity Company's contractual commitments, Saudi Electricity Company's communication and coordination effectiveness, contractors' project planning and project control effectiveness, consultant-related aspects, manpower challenges and material uncertainties, Saudi Electricity Company's tendering system, and lack of project requirements clarity. The study has implications for industry policy in that it provides a coherent assessment of the key project stakeholders' central problems. From this analysis, pragmatic recommendations are proposed that, if enacted, will minimise the significance of the identified problems on future project outcomes, thus helping to ensure the electricity supply-demand gap is diminished.

Analysis of interactions among variables of renewable energy projects:a case study on renewable energy project in India

This study highlights the variables associated with the implementation of renewable energy (RE) projects for sustainable development in India, by using an interpretive structural modeling (ISM) - based approach to model variables' interactions, which impact RE adoption. These variables have been categorized under enablers that help to enhance implementation of RE projects for sustainable development. A major finding is that public awareness regarding RE for sustainable development is a very significant enabler. For successful implementation of RE projects, it has been observed that top management should focus on improving highdriving power enablers (leadership, strategic planning, public awareness, management commitment, availability of finance, government support, and support from interest groups).

Investigation of liquid sodium alginates as mucoadhesive bandages coating the oesophageal mucosa and protecting it from gastric reflux

Gastro-oesophageal Reflux Disease (GORD), is generally caused by excess gastric reflux back to the oesophagus where damage to the mucosa results in injury. GORD is a very common disease in western countries, more than a quarter of western people are suffering from this disease and there is a trend that the percentage population in eastern countries who are diagnosed as GORD is increasing. GORD and its complications damage the quality of life and can lead to serious oesophageal diseases including Barrett’s disease and oesophageal carcinoma. Sodium alginate dissolved in water forms a viscous liquid and can coat on oesophageal mucosa for a period of time. In this study the ability of the liquid alginate to adhere to the oesophageal mucosa was investigated and the factors that affect this retention were examined. The potential of this liquid alginate as a drug delivery vehicle to extend the duration of contact with the oesophageal mucosa was confirmed by this study. The capacity of an alginate coating to retard acid and pepsin diffusion, the two main aggressive factors in gastric reflux, was investigated. A significant reduction in acid and pepsin diffusion by alginate gel layer was demonstrated in this project, indicating that alginate has great potential to protect against damage caused by acidic reflux. A novel method was introduced using an independent score system to assess the protection of oesophageal tissue by a coating of liquid alginate using microscopy as a technique. This technique demonstrated that alginate can protect the oesophageal epithelial tissue from the damage caused by gastric acid and pepsin. Many techniques were used in this study. The experimental results suggested that liquid sodium alginate is a very promising candidate in treating local oesophageal diseases through forming a coating on the oesophageal mucosal surface, retarding the diffusion of components of gastric refluxate and thus reducing the contact of these noxious factors with the epithelium and minimising injury.

Evaluating and developing project-based learning:an empirical approach to evaluating CDIO

As a global profession, engineering is integral to the maintenance and further development of society. Indeed, contemporary social problems requiring engineering solutions are not only a consequence of natural and ‘manmade’ disasters (such as the Japanese earthquake or the oil leakage in the Gulf of Mexico) but also encapsulate 21st Century dilemmas around sustainability, poverty and pollution [2,6,7]. Given the complexity of such problems and the constant need for innovation, the demand for engineering education to provide a ready supply of suitably qualified engineering graduates, able to make innovative decisions has never been higher [3,5]. Bearing this in mind, and taking account problems of attrition in engineering education [1,6,4] innovation in the way in which the curriculum is developed and delivered is crucial. CDIO [Conceive, Design, Implement, Operate] provides a potentially ground-breaking solution to such dilemmas. Aimed at equipping students with practical engineering skills supported by the necessary theoretical background, CDIO could potentially change the way engineering is perceived and experienced within higher education. Aston University introduced CDIO into its Mechanical Engineering and Design programmes in October 2011. From its induction, engineering education researchers have ‘shadowed’ the staff responsible for developing and teaching the programme. Utilising an Action Research Design, and adopting a mixed methodological research design, the researchers have worked closely with the teaching team to critically reflect on the processes involved in introducing CDIO into the curriculum. Concurrently, research has been conducted to capture students’ perspectives of CDIO. In evaluating the introduction of CDIO at Aston, the researchers have developed a distinctive research strategy with which to evaluate CDIO. It is the emergent findings from this research that form the basis of this paper. Although early-on in its development CDIO is making a significant difference to engineering education at the University. The paper draws attention to pedagogical, practical and professional issues – discussing each one in turn and in doing so critically analysing the value of CDIO from academic, student and industrial perspectives. The paper concludes by noting that whilst CDIO represents a forwardthinking approach to engineering education, the need for constant innovation in learning and teaching should not be forgotten. Indeed, engineering education needs to put itself at the forefront of pedagogic practice. Providing all-rounded engineers, ready to take on the challenges of the 21st Century!

Corporate political activity in less developed countries:The Volta River Project in Ghana, 1958-66

The article expands existing categorisations of political and economic governance by including literature on less developed countries (LDCs). In four consecutive negotiations between the US multinational Kaisers and the US and Ghana governments in the early 1960s, it is argued that the company reached levels of influence that are at odds with existing explanations. In order to understand corporate political activities in LDCs, analysis needs to go beyond static factors (political risk) and include dynamic factors such as diplomatic relations and 'arenas of power', and consider the role of the investor's home country relative to the host economy.

Your students have excellent knowledge and skills but they don’t think about them...:a reflective learning project

This paper describes two phases of a project set up to encourage students to be more reflective about their studies and their career goals. it takes as its starting point a discussion with employers about the Jack of reflection that they observed in otherwise highly skilled management graduates. The project.examin!ld.a number of processes, including mentoring, logbooks and learning style questionnaires to gauge which was the most effective in inspiring students to be reflective. Having identified the best methods the project entered a second phase which involved rolling out the findings to large numbers of students. The challenges of doing this are analysed in the paper.

An online assessment and development tool for business incubators:optimising business-incubation management practice, performance and impact, Project Report

This project is focused on exchanging knowledge between ABS, UKBI and managers of business incubators in the UK. The project relates to exploitation of extant knowledge-base on assessing and improving business incubation management practice and performance and builds on two earlier studies. It addresses a pressing need for assessing and benchmarking business incubation input, process and outcome performance and highlighting best practice. The overarching aim of this project was to obtain proof-of-concept for a business incubation performance assessment and benchmarking online tool, fine-tune it and put it in use by nurturing a community of business incubation management practice, aligned by the resultant tool. The purpose was to offer an appropriate set of measures, in areas identified by relevant research on business incubation performance management and impact as critical, against which: 1.The input and process performance of business incubation management practice can be assessed and benchmarked within the auspices of a community of incubator managers concerned with best practice 2.The outcome performance and impact of business incubators can be assessed longitudinally. As such, the developed online assessment framework is geared towards the needs of researchers, policy makers and practitioners concerned with business incubation performance, added value and impact.