965 resultados para internal transcribed spacer (ITS)
Resumo:
An extensible internal device (EID) was developed to preserve growth plate during the treatment of fracture complications or segmental bone loss from tumour resection in children. Since this type of extensible, trans-physeal, internal fixation device has only been used in a few paediatric cases; the aim of this study was to evaluate an in vivo canine study, a surgical application of this device, and its interference with longitudinal growth of the non-fractured distal femur. Ton clinically healthy two- to three-month-old poodles weighing 1.5-2.3 kg were used. Following a medial approach to the right distal femur, one extremity of the EID, similar to a T-plate, was fixed in the femoral condyle with two cortical screws placed below the growth plate. The other extremity, consisting of an adaptable brim with two screw holes and a plate guide, was fixed in the third distal of the femoral diaphysis with two cortical screws. The EID was removed 180 days after application. All of the dogs demonstrated full weight-bearing after surgery. The values of thigh and stifle circumferences, and stifle joint motion range did not show any difference between operated and control hindlimbs. The plate slid in the device according to longitudinal bone growth, in all but one dog. In this dog, a 10.5% shortening of the femoral shaft was observed due to a lack of EID sliding. The other dogs had the some longitudinal lengths in both femurs. The EID permits longitudinal bone growth without blocking the distal femur growth plate if appropriately placed.
Resumo:
Phylogenetic analyses of representative species from the five genera of Winteraceae (Drimys, Pseudowintera, Takhtajania, Tasmannia, and Zygogynum s.l.) were performed using ITS nuclear sequences and a combined data-set of ITS + psbA-trnH + rpS16 sequences (sampling of 30 and 15 species, respectively). Indel informativity using simple gap coding or gaps as a fifth character was examined in both data-sets. Parsimony and Bayesian analyses support the monophyly of Drimys, Tasmannia, and Zygogynum s.l., but do not support the monophyly of Belliolum, Zygogynum s.s., and Bubbia. Within Drimys, the combined data-set recovers two subclades. Divergence time estimates suggest that the splitting between Drimys and its sister clade (Pseudowintera + Zygogynum s.l.) occurred around the end of the Cretaceous; in contrast, the divergence between the two subclades within Drimys is more recent (15.5-18.5 MY) and coincides in time with the Andean uplift. Estimates suggest that the earliest divergences within Winteraceae could have predated the first events of Gondwana fragmentation. (C) 2009 Elsevier Inc. All rights reserved.
Resumo:
Non-LTR retrotransposons, also known as long interspersed nuclear elements (LINEs), are transposable elements that encode a reverse transcriptase and insert into genomic locations via RNA intermediates. The sequence analysis of a cDNA library constructed from mRNA of the salivary glands of R. americana showed the presence of putative class I elements. The cDNA clone with homology to a reverse transcriptase was the starting point for the present study. Genomic phage was isolated and sequenced and the molecular structure of the element was characterized as being a non-LTR retrotransposable element. Southern blot analysis indicated that this transposable element is represented by repeat sequences in the genome of R. americana. Chromosome tips were consistently positive when this element was used as probe in in-situ hybridization. Real-time RT-PCR showed that this retrotransposon is transcribed at different periods of larval development. Most interesting, the silencing of this retrotransposon in R. americana by RNA interference resulted in reduced transcript levels and in accelerated larval development.
Resumo:
Background Along the internal carotid artery (ICA), atherosclerotic plaques are often located in its cavernous sinus (parasellar) segments (pICA). Studies indicate that the incidence of pre-atherosclerotic lesions is linked with the complexity of the pICA; however, the pICA shape was never objectively characterized. Our study aims at providing objective mathematical characterizations of the pICA shape. Methods and results Three-dimensional (3D) computer models, reconstructed from contrast enhanced computed tomography (CT) data of 30 randomly selected patients (60 pICAs) were analyzed with modern visualization software and new mathematical algorithms. As objective measures for the pICA shape complexity, we provide calculations of curvature energy, torsion energy, and total complexity of 3D skeletons of the pICA lumen. We further measured the posterior knee of the so-called ""carotid siphon"" with a virtual goniometer and performed correlations between the objective mathematical calculations and the subjective angle measurements. Conclusions Firstly, our study provides mathematical characterizations of the pICA shape, which can serve as objective reference data for analyzing connections between pICA shape complexity and vascular diseases. Secondly, we provide an objective method for creating Such data. Thirdly, we evaluate the usefulness of subjective goniometric measurements of the angle of the posterior knee of the carotid siphon.
Resumo:
Inside the `cavernous sinus` or `parasellar region` the human internal carotid artery takes the shape of a siphon that is twisted and torqued in three dimensions and surrounded by a network of veins. The parasellar section of the internal carotid artery is of broad biological and medical interest, as its peculiar shape is associated with temperature regulation in the brain and correlated with the occurrence of vascular pathologies. The present study aims to provide anatomical descriptions and objective mathematical characterizations of the shape of the parasellar section of the internal carotid artery in human infants and its modifications during ontogeny. Three-dimensional (3D) computer models of the parasellar section of the internal carotid artery of infants were generated with a state-of-the-art 3D reconstruction method and analysed using both traditional morphometric methods and novel mathematical algorithms. We show that four constant, demarcated bends can be described along the infant parasellar section of the internal carotid artery, and we provide measurements of their angles. We further provide calculations of the curvature and torsion energy, and the total complexity of the 3D skeleton of the parasellar section of the internal carotid artery, and compare the complexity of this in infants and adults. Finally, we examine the relationship between shape parameters of the parasellar section of the internal carotid artery in infants, and the occurrence of intima cushions, and evaluate the reliability of subjective angle measurements for characterizing the complexity of the parasellar section of the internal carotid artery in infants. The results can serve as objective reference data for comparative studies and for medical imaging diagnostics. They also form the basis for a new hypothesis that explains the mechanisms responsible for the ontogenetic transformation in the shape of the parasellar section of the internal carotid artery.
Resumo:
The ever-increasing robustness and reliability of flow-simulation methods have consolidated CFD as a major tool in virtually all branches of fluid mechanics. Traditionally, those methods have played a crucial role in the analysis of flow physics. In more recent years, though, the subject has broadened considerably, with the development of optimization and inverse design applications. Since then, the search for efficient ways to evaluate flow-sensitivity gradients has received the attention of numerous researchers. In this scenario, the adjoint method has emerged as, quite possibly, the most powerful tool for the job, which heightens the need for a clear understanding of its conceptual basis. Yet, some of its underlying aspects are still subject to debate in the literature, despite all the research that has been carried out on the method. Such is the case with the adjoint boundary and internal conditions, in particular. The present work aims to shed more light on that topic, with emphasis on the need for an internal shock condition. By following the path of previous authors, the quasi-1D Euler problem is used as a vehicle to explore those concepts. The results clearly indicate that the behavior of the adjoint solution through a shock wave ultimately depends upon the nature of the objective functional.
Resumo:
An international standard, ISO/DP 9459-4 has been proposed to establish a uniform standard of quality for small, factory-made solar heating systerns. In this proposal, system components are tested separatelyand total system performance is calculated using system simulations based on component model parameter values validated using the results from the component tests. Another approach is to test the whole system in operation under representative conditions, where the results can be used as a measure of the general system performance. The advantage of system testing of this form is that it is not dependent on simulations and the possible inaccuracies of the models. Its disadvantage is that it is restricted to the boundary conditions for the test. Component testing and system simulation is flexible, but requires an accurate and reliable simulation model.The heat store is a key component conceming system performance. Thus, this work focuses on the storage system consisting store, electrical auxiliary heater, heat exchangers and tempering valve. Four different storage system configurations with a volume of 750 litre were tested in an indoor system test using a six -day test sequence. A store component test and system simulation was carried out on one of the four configurations, applying the proposed standard for stores, ISO/DP 9459-4A. Three newly developed test sequences for intemalload side heat exchangers, not in the proposed ISO standard, were also carried out. The MULTIPORT store model was used for this work. This paper discusses the results of the indoor system test, the store component test, the validation of the store model parameter values and the system simulations.
Resumo:
Summary To become, to be and to have been: about the Jehovah’s Witnesses The Watchtower Bible and Tract Society, in the following text referred to as the Jehovah’s Witnesses or “the organisation”, is a worldwide Christian organisation with about 6.7 million members. The organisation has many times, without any success so far, proclaimed Armageddon when they expect Jehovah to return to Earth. They interpret the Bible in their own, often very literal way, and require their members to live according to these interpretations. Among the consequences of this, members are forbidden to vote, to do military service or to receive blood transfusions. Apart from attending the three weekly meetings, members are expected to be active in missionary work, known as “publishing”. If a member fails to do a certain number of hours’ publishing, he or she risks being deprived of active membership status Sweden in general is considered to be a society where the population is not very religious. The formerly state-governed Lutheran church has lost its influence and the vast majority of ordinary Swedes do not visit church on other occasions than weddings, funerals or christenings. Expressing one’s own religious values has become somewhat of a private matter where publicity is seldom appreciated, which is contrary to the practice of the Jehovah’s Witnesses. This is one of the reasons why the Jehovah’s Witnesses are commonly perceived by average Swedes as a “suspicious” religious organisation. The aim and methods of the study This dissertation seeks to describe and investigate the entering and leaving of a highly structured and hierarchical religious community, exemplified in this case by the Jehovah’s Witnesses. What are the thoughts and aspirations of someone who is considering becoming a Jehovah’s Witness? What are the priorities and what experiences seem important when a person is going through such a process? And when this person has finally reached his or her goal of becoming a member, is it the same motivation that makes him or her stay in the organisation for longer periods of time, possibly for the rest of their lives, or does it change during the process of entering, or does this motivation change its character during the transition from entering to being a regular member? Why do some of the members change their attitude to the Jehovah’s Witnesses from rejoicing to bitterness? And how does this process of exit manifest itself? In what way is it different from the process of entry? The respondents in this study were chosen from both active members of the Jehovah’s Witnesses in Sweden and those who have left the organisation for personal reasons. Repeated interviews with ten active members of the organisation have been conducted in the course of the study and compared to equal numbers of former members. The interviews have been semi-structured to deal with questions of how a person has come into contact with the organisation; how they retrospectively experienced the process of entry; the reasons for becoming a member. Questions have also been asked about life in the organisation. The group of “exiters” have also been asked about the experience of leaving, why they wanted to leave, and how this process was started and carried out. In addition to this I have analysed a four-year diary describing the time inside and the process of leaving the organisation. This has given me an extra psychological insight into the inner experience of someone who has gone through the whole process. The analysis has been done by categorising the content of the transcribed interviews. An attempt to outline a model of an entry and exit process has been made, based on ideas and interpretations presented in the interviews. The analysis of the diary has involved thorough reading, resulting in a division of it into four different parts, where each part has been given a certain key-word, signifying the author’s emotional state when writing it. A great deal of the information about the Jehovah’s Witnesses has been collected through discussion boards on the Internet, informal talks with members and ex-members, interviews with representatives of the organisations during visits to its different offices (Bethels), such as St. Petersburg, Russia, and Brooklyn, New York, USA. The context Each organisation evolves in its own context with its own norms, roles and stories that would not survive outside it. With this as a starting point, there is a chapter dedicated to the description of the organisation’s history, structure and activities. It has been stated that the organisation’s treatment of its critical members and the strategies for recruiting new members have evolved over the years of its history. At the beginning there was an openness allowing members to be critical. As the structure of the organisation has become more rigid and formalised, the treatment of internal critics has become much less tolerated and exclusion has become a frequent option. As a rule many new members have been attracted to the organisation when (1) the day of Armageddon has been pronounced to be approaching; (2) the members of the organisation have been persecuted or threatened with persecution; and (3) the organisation has discovered a “new market”. The processes for entering and exiting How the entering processes manifest themselves depends on whether the person has been brought up in the organisation or not. A person converting as an adult has to pass six phases before being considered a Jehovah’s Witness by the organisation. These are: Contact with the Jehovah’s Witnesses, Studying the bible with members of the organisation, Questioning, Accepting, Being active as publisher (spreading the belief), Being baptised. For a person brought up in the organisation, the process to full membership is much shorter: Upbringing in the organisation, Taking a stand on the belief, Being baptised. The exit process contains of seven phases: Different levels of doubts, Testing of doubts, Turning points, Different kinds of decisions, Different steps in executing the decisions, Floating, a period of emotional and cognitive consideration of membership and its experiences, Realtive neutrality. The process in and the process out are both slow and are accompanied with anguish and doubts. When a person is going through the process in or out of the organisation he or she experiences criticism. This is when people around the adept question the decision to continue in the process. The result of the criticism depends on where in the process the person is. If he or she is at the beginning of the process, the criticism will probably make the person insecure and the process will slow down or stop. If the criticism is pronounced in a later phase, the process will probably speed up. The norms of the organisation affect the behaviour of the members. There are techniques for inclusion that both bind members to the organisation and shield them off from the surrounding society. Examples of techniques for inclusion are the “work situation” and “closed doors”. The work situation signifies that members who do as the organisation recommends – doing simple work – often end up in the same branch of industry as many other Jehovah’s Witnesses. This often means that the person has other witnesses as workmates. If the person is unemployed or moves to another town it is easy to find a new job through connections in the organisation. Doubts and exclusions can lead to problems since they entail a risk of losing one’s job. This can also result in problems getting a new job. Jehovah’s Witnesses are not supposed to talk to excluded members, which of course mean difficulties working together. “Closed doors” means that members who do as the organisation recommends – not pursuing higher education, not engaging in civil society, working with a manual or in other way simple job, putting much time into the organisation – will, after a long life in the organisation, have problems starting a new life outside the Jehovah’s Witnesses. The language used in the organisation shows the community among the members, thus the language is one of the most important symbols. A special way of thinking is created through the language. It binds members to the organisation and sometimes it can work as a way to get back into the normative world of the organisation. Randall Collins’s (1990, 2004) thoughts about “emotional energy” have enabled an understanding of the solidarity and unity in the organisation. This also gives an understanding of the way the members treat doubting and critical members. The members who want to exit have to open up the binding/screening off. A possible way to do that is through language, to become aware of the effect the language might have. Another way is to search for emotional energy in another situation. During the exit process, shame might be of some importance. When members become aware of the shame they feel, because they perceive they are “acting a belief”, the exit process might accelerate.
Resumo:
This paper studies the incentives underlying the relations between foreign countries and rival domestic groups. It models the interaction in a infinitely-repeated game between these three players. The domestic groups bargain for a split of the domestic surplus and may engage in violent dispute for power and in unilateral mass killing processes. The foreign country may choose to support one of these groups in exchange for monetary transfers. The paper characterizes the parametric set in which strategies leading to no violent disputes nor mass killings are Subgame Perfect Nash Equilibra in the presence of foreign support, but not in its absence.
A cultura organizacional influenciando o comportamento do capital humano na biblioteca universitária
Resumo:
DUARTE, E. N. ; CARVALHO, Andréa Vasconcelos ; PINHEIRO, E. G. ; CARVALHO, Luciana Moreira ; NOGUEIRA, N. M. F. . A cultura organizacional influenciando o comportamento do capital humano na biblioteca universitária. Informação & Sociedade. Estudos, João Pessoa - PB, v. 10, n. 2, p. 190-210, 2000
Resumo:
Diferenças inter e intra-específicas na habilidade de suportar períodos de estresse nutricional podem dever-se à capacidade de armazenar e liberar íons dos vacúolos, e, ou, à intensidade de retranslocação de nutrientes em tais condições. Neste trabalho, pretendeu-se avaliar diferenças varietais quanto ao tamanho do pool não-metabólico de Pi; velocidade de liberação do Pi previamente armazenado (VLPi), quando o P citoplasmático cai a um valor limite; capacidade de transportar Pi de regiões menos ativas para aquelas mais ativas metabolicamente e definir compartimentos que são preferencialmente fontes e os que são preferencialmente drenos para o Pi, em condições de absorção limitada de P. Avaliaram-se a produção de matéria seca e os teores internos de Pi, orgânico (Po) e total solúvel em ácido (Pts), de diferentes órgãos de plantas dos cultivares de soja (Glycine max L. Merrill) Santa Rosa, Uberaba, IAC8, Doko e UFV1, submetidos a oito dias de omissão do elemento. A VLPi foi estimada como tangente às equações obtidas para Pi como função do perído de omissão no ponto médio do período de omissão em que houve maior decréscimo em Pi (zero a quatro dias de omissão de P), t = dois dias, considerando-se que -deltaPi/deltat expressa a velocidade de liberação de Pi. A capacidade interna de tamponamento de Pi (CTIPi) foi calculada como o inverso da VLPi. O cultivar Santa Rosa apresentou maior capacidade de armazenar Pi, quando o suprimento externo foi alto, liberando-o mais intensamente sob condições de baixo suprimento de P que os cultivares IAC8 e UFV1. O cultivar Uberaba mostrou-se superior ao Doko em sua habilidade de armazenar e utilizar o Pi. Folhas superiores mostraram ser o principal dreno para o Pi armazenado em folhas medianas e inferiores, seguidas por raízes e caules. Raízes comportaram-se como fontes ou drenos para o Pi. Raízes e folhas superiores apresentaram maiores (VLPi) e menores valores de CTIPi que folhas medianas e folhas inferiores, sendo o caule o compartimento com menor VLPi e maior CTIPi. Dentre as variedades, as diferenças foram pequenas, destacando-se a maior VLPi e menor CTIPi do cultivar Santa Rosa. O cultivar Doko apresentou a menor VLPi e maior CTIPi, enquanto Uberaba, IAC8 e UFV1 ocuparam posição intermediária quanto a essas características.
Resumo:
This paper presents an efficient neural network for solving constrained nonlinear optimization problems. More specifically, a two-stage neural network architecture is developed and its internal parameters are computed using the valid-subspace technique. The main advantage of the developed network is that it treats optimization and constraint terms in different stages with no interference with each other. Moreover, the proposed approach does not require specification of penalty or weighting parameters for its initialization.
Resumo:
This paper evaluates and quantifies the environmental impact from the use of some renewable fuels and fossils fuels in internal combustion engines. The following fuels are evaluated: gasoline blended with anhydrous ethyl alcohol (anhydrous ethanol), conventional diesel fuel, biodiesel in pure form and blended with diesel fuel, and natural gas. For the case of biodiesel, its complete life cycle and the closed carbon cycle (photosynthesis) were considered. The ecological efficiency concept depends on the environmental impact caused by CO(2), SO(2), NO(x) and particulate material (PM) emissions. The exhaust gases from internal combustion engines, in the case of the gasoline (blended with alcohol), biodiesel and biodiesel blended with conventional diesel, are the less polluting; on the other hand, the most polluting are those related to conventional diesel. They can cause serious problems to the environment because of their dangerous components for the human, animal and vegetable life. The resultant pollution of each one of the mentioned fuels are analyzed, considering separately CO(2), SO(2), NO(x) and particulate material (PM) emissions. As conclusion, it is possible to calculate an environmental factor that represents, qualitatively and quantitative, the emissions in internal combustion engines that are mostly used in urban transport. Biodiesel in pure form (B100) and blended with conventional diesel as fuel for engines pollute less than conventional diesel fuel. The ecological efficiency for pure biodiesel (B100) is 86.75%: for biodiesel blended with conventional diesel fuel (B20, 20% biodiesel and 80% diesel), it is 78.79%. Finally, the ecological efficiency for conventional diesel, when used in engines, is 77.34%; for gasoline, it is 82.52%, and for natural gas, it is 91.95%. All these figures considered a thermal efficiency of 30% for the internal combustion engine. Crown Copyright (C) 2008 Published by Elsevier Ltd. All rights reserved.
Resumo:
An extensible internal device (EID) was developed to preserve growth plate during the treatment of fracture complications or segmental bone loss from tumour resection in children. Since this type of extensible, trans-physeal, internal fixation device has only been used in a few paediatric cases; the aim of this study was to evaluate an in vivo canine study, a surgical application of this device, and its interference with longitudinal growth of the non-fractured distal femur. Ton clinically healthy two- to three-month-old poodles weighing 1.5-2.3 kg were used. Following a medial approach to the right distal femur, one extremity of the EID, similar to a T-plate, was fixed in the femoral condyle with two cortical screws placed below the growth plate. The other extremity, consisting of an adaptable brim with two screw holes and a plate guide, was fixed in the third distal of the femoral diaphysis with two cortical screws. The EID was removed 180 days after application. All of the dogs demonstrated full weight-bearing after surgery. The values of thigh and stifle circumferences, and stifle joint motion range did not show any difference between operated and control hindlimbs. The plate slid in the device according to longitudinal bone growth, in all but one dog. In this dog, a 10.5% shortening of the femoral shaft was observed due to a lack of EID sliding. The other dogs had the some longitudinal lengths in both femurs. The EID permits longitudinal bone growth without blocking the distal femur growth plate if appropriately placed.
Resumo:
The caroticoclinoid foramen is an inconstant structure, formed by the union of the anterior and middle clinoid processes. The aim of this study was to perform an incidence and morphometry of the caroticoclinoid foramen in Brazilian human skulls and discuss its clinical implications. Eighty dry human skulls with sex distinction were used, and 3 groups of incidence were determined: General, sex, and sides. The morphometry was performed using a manual caliper and the major diameter of the foramina was measured; the values were also divided in general, according to sex and sides. The incidence of skulls with at least one foramen was 8.5%. According to the sides, 8.5% of the skulls showed foramen on the right side and 2.5% on the left. We found 2.5% of the skulls with bilateral foramen and 6.25% with unilateral foramen. In relation to sex, the foramens were found in 5% of male skulls and 12.5% of female skulls. The major diameter of this structure presented on mean, values of 5.23 mm on general, 5.18 mm on the right side and 5.35 mm on the left, 5.30 mm in male skulls and 5.18 mm in female skulls. The anatomical characteristics of this foramen should be considered in view of its clinical implications associated with neurosurgery as clinoid process removal, and symptoms as headache due to internal carotid artery alterations in this region. In conclusion knowledge of this structure supports the diagnosis and treatment of clinical complications related to this variation.