Efeito da concentração de sólidos e de variáveis operacionais no desempenho de um hidrociclone concentrador

The hydrocycloning operation has a goal to separate solid-liquid suspensions and liquid-liquid emulsions through the centrifugal force action. Hydrocyclones are equipment with reduced size and used in both clarification and thickening. This device is used in many areas, like petrochemical and minerals process, and accumulate advantages like versatility and low cost of maintenance. However, the demand to improve the process and to reduce the costs has motivated several studies of equipment optimization. The filtering hydrocyclone is a non-conventional equipment developed at FEQUI/UFU with objective to improve the hydrocycloning separation efficiency. The purpose of this study is to evaluate the operating conditions of feed concentration and underflow diameter on the performance of a filtering geometry optimized to minimization of energy costs. The filtration effect was investigated through the comparison between the performance of the Optimized Filtering Hydrocyclone (HCOF) and the Optimized Concentrator Hydrocyclone (HCO). Because of the resemblance of hydrocyclones performance, the filtration did not represent significant effect on the performance of the HCOF. It was found that in this geometry the decrease of the variable underflow diameter was very favorable to thickening operation. The suspension concentration of quartzite at 1.0% of solids in volume was increased about 42 times when the 3 mm underflow diameter was used. The increase on the feed solid percentage was good for decreasing the energy spent, so that a minimum number of Euler of 730 was achieved at CVA = 10.0%v. However, a greater amount of solids in suspension leads to a lower efficiency of the equipment. Therefore, to minimize the underflow-to-throughput ratio and keep a high efficiency level, it is indicated to work with dilute suspension (CVA = 1.0%) and 3 mm underflow diameter (η = 67%). But if it is necessary to work with high feed concentration, the use of 5 mm underflow diameter provides a rise in the efficiency. The HCO hydrocyclone was compared to the traditional family of hydrocyclones Rietema and presented advantages like higher efficiency (34% higher in average) and lower energy costs (20% lower in average). Finally, the efficiency curves and project equation have been raised for the HCO hydrocyclone each with satisfactory adjust.

Codificação compatível de vídeo 3D com o algoritmo HEVC

Esta dissertação apresenta um trabalho sobre codificação de vídeo 3D compatível com vídeo 2D. Tem por base o desenvolvimento de um método para melhorar, no descodificador, a reconstrução de uma vista subamostrada resultante de uma transmissão simulcast usando a norma de codificação de vídeo H.265 (informalmente denominada de High Efficiency Video Coding (HEVC)). Apesar de manter a compatibilidade com vídeo 2D a transmissão simulcast normalmente requer uma taxa de transmissão elevada. Na ausência de ferramentas de codificação 3D adequadas é possível reduzir a taxa de transmissão utilizando compressão assimétrica do vídeo, onde a vista base é codificada com a resolução espacial original, enquanto que a vista auxiliar é codificada com uma resolução espacial menor, sendo sobreamostrada no descodificador. O método desenvolvido visa melhorar a vista auxiliar sobreamostrada no descodificador utilizando informação dos detalhes da vista base, ou seja, as componentes de alta frequência. Este processo depende de transformadas Afim para realizar um mapeamento geométrico entre a informação de alta frequência da vista base de resolução completa e a vista auxiliar de menor resolução. Adicionalmente, de modo a manter a continuidade do conteúdo da imagem entre regiões, evitando artefatos de blocos, o mapeamento utiliza uma malha de triangulação da vista auxiliar aplicado à imagem de detalhes obtida a partir da vista base. A técnica proposta é comparada com um método de estimação de disparidade por correspondência de blocos, sendo que os resultados mostram que para algumas sequências a técnica desenvolvida melhora não só a qualidade objetiva (PSNR) até 2.2 dB, mas também a qualidade subjetiva, para a mesma taxa de compressão global.

Contributions to HEVC Prediction for Medical Image Compression

Medical imaging technology and applications are continuously evolving, dealing with images of increasing spatial and temporal resolutions, which allow easier and more accurate medical diagnosis. However, this increase in resolution demands a growing amount of data to be stored and transmitted. Despite the high coding efficiency achieved by the most recent image and video coding standards in lossy compression, they are not well suited for quality-critical medical image compression where either near-lossless or lossless coding is required. In this dissertation, two different approaches to improve lossless coding of volumetric medical images, such as Magnetic Resonance and Computed Tomography, were studied and implemented using the latest standard High Efficiency Video Encoder (HEVC). In a first approach, the use of geometric transformations to perform inter-slice prediction was investigated. For the second approach, a pixel-wise prediction technique, based on Least-Squares prediction, that exploits inter-slice redundancy was proposed to extend the current HEVC lossless tools. Experimental results show a bitrate reduction between 45% and 49%, when compared with DICOM recommended encoders, and 13.7% when compared with standard HEVC.

MOVPE growth and characterization of Al(Ga)N and InAlN/AlGaN quantum wells for UV LED applications

The study of III-nitride materials (InN, GaN and AlN) gained huge research momentum after breakthroughs in the production light emitting diodes (LEDs) and laser diodes (LDs) over the past two decades. Last year, the Nobel Prize in Physics was awarded jointly to Isamu Akasaki, Hiroshi Amano and Shuji Nakamura for inventing a new energy efficient and environmental friendly light source: blue light-emitting diode (LED) from III-nitride semiconductors in the early 1990s. Nowadays, III-nitride materials not only play an increasingly important role in the lighting technology, but also become prospective candidates in other areas, for example, the high frequency (RF) high electron mobility transistor (HEMT) and photovoltaics. These devices require the growth of high quality III-nitride films, which can be prepared using metal organic vapour phase epitaxy (MOVPE). The main aim of my thesis is to study and develop the growth of III-nitride films, including AlN, u-AlGaN, Si-doped AlGaN, and InAlN, serving as sample wafers for fabrication of ultraviolet (UV) LEDs, in order to replace the conventional bulky, expensive and environmentally harmful mercury lamp as new UV light sources. For application to UV LEDs, reducing the threading dislocation density (TDD) in AlN epilayers on sapphire substrates is a key parameter for achieving high-efficiency AlGaNbased UV emitters. In Chapter 4, after careful and systematic optimisation， a working set of conditions, the screw and edge type dislocation density in the AlN were reduced to around 2.2×108 cm-2 and 1.3×109 cm-2 , respectively, using an optimized three-step process, as estimated by TEM. An atomically smooth surface with an RMS roughness of around 0.3 nm achieved over 5×5 µm 2 AFM scale. Furthermore, the motion of the steps in a one dimension model has been proposed to describe surface morphology evolution, especially the step bunching feature found under non-optimal conditions. In Chapter 5, control of alloy composition and the maintenance of compositional uniformity across a growing epilayer surface were demonstrated for the development of u-AlGaN epilayers. Optimized conditions (i.e. a high growth temperature of 1245 °C) produced uniform and smooth film with a low RMS roughness of around 2 nm achieved in 20×20 µm 2 AFM scan. The dopant that is most commonly used to obtain n-type conductivity in AlxGa1-xN is Si. However, the incorporation of Si has been found to increase the strain relaxation and promote unintentional incorporation of other impurities (O and C) during Si-doped AlGaN growth. In Chapter 6, reducing edge-type TDs is observed to be an effective appoach to improve the electric and optical properties of Si-doped AlGaN epilayers. In addition, the maximum electron concentration of 1.3×1019 cm-3 and 6.4×1018 cm-3 were achieved in Si-doped Al0.48Ga0.52N and Al0.6Ga0.4N epilayers as measured using Hall effect. Finally, in Chapter 7, studies on the growth of InAlN/AlGaN multiple quantum well (MQW) structures were performed, and exposing InAlN QW to a higher temperature during the ramp to the growth temperature of AlGaN barrier (around 1100 °C) will suffer a significant indium (In) desorption. To overcome this issue, quasi-two-tempeature (Q2T) technique was applied to protect InAlN QW. After optimization, an intense UV emission from MQWs has been observed in the UV spectral range from 320 to 350 nm measured by room temperature photoluminescence.

Investigation of Performance Enhancements for a Liquid-Desiccant Solar Air-Conditioner

Thermally driven liquid-desiccant air-conditioners (LDAC) are a proven but still developing technology. LDACs can use a solar thermal system to reduce the operational cost and environmental impact of the system by reducing the amount of fuel (e.g. natural gas, propane, etc.) used to drive the system. LDACs also have a key benefit of being able to store energy in the form of concentrated desiccant storage. TRNSYS simulations were used to evaluate several different methods of improving the thermal and electrical coefficients of performance (COPt and COPe) and the solar fraction (SF) of a LDAC. The study analyzed a typical June to August cooling season in Toronto, Ontario. Utilizing properly sized, high-efficiency pumps increased the COPe to 3.67, an improvement of 55%. A new design, featuring a heat recovery ventilator on the scavenging-airstream and an energy recovery ventilator on the process-airstream, increased the COPt to 0.58, an improvement of 32%. This also improved the SF slightly to 54%, an increase of 8%. A new TRNSYS TYPE was created to model a stratified desiccant storage tank. Different volumes of desiccant were tested with a range of solar array system sizes. The largest storage tank coupled with the largest solar thermal array showed improvements of 64% in SF, increasing the value to 82%. The COPe was also improved by 17% and the COPt by 9%. When combining the heat recovery systems and the desiccant storage systems, the simulation results showed a 78% increase in COPe and 30% increase in COPt. A 77% improvement in SF and a 17% increase in total cooling rate were also predicted by the simulation. The total thermal energy consumed was 10% lower and the electrical consumption was 34% lower. The amount of non-renewable energy needed from the natural gas boiler was 77% lower. Comparisons were also made between LDACs and vapour-compression (VC) systems. Dependent on set-up, LDACs provided higher latent cooling rates and reduced electrical power consumption. Negatively, a thermal input was required for the LDAC systems but not for the VC systems.

SINGLE STAGE LED DRIVER TECHNOLOGY WITH LOW FREQUENCY RIPPLE CANCELLATION

Because of high efficacy, long lifespan, and environment-friendly operation, LED lighting devices become more and more popular in every part of our life, such as ornament/interior lighting, outdoor lightings and flood lighting. The LED driver is the most critical part of the LED lighting fixture. It heavily affects the purchasing cost, operation cost as well as the light quality. Design a high efficiency, low component cost and flicker-free LED driver is the goal. The conventional single-stage LED driver can achieve low cost and high efficiency. However, it inevitably produces significant twice-line-frequency lighting flicker, which adversely affects our health. The conventional two-stage LED driver can achieve flicker-free LED driving at the expenses of significantly adding component cost, design complexity and low the efficiency. The basic ripple cancellation LED driving method has been proposed in chapter three. It achieves a high efficiency and a low component cost as the single-stage LED driver while also obtaining flicker-free LED driving performance. The basic ripple cancellation LED driver is the foundation of the entire thesis. As the research evolving, another two ripple cancellation LED drivers has been developed to improve different aspects of the basic ripple cancellation LED driver design. The primary side controlled ripple cancellation LED driver has been proposed in chapter four to further reduce cost on the control circuit. It eliminates secondary side compensation circuit and an opto-coupler in design while at the same time maintaining flicker-free LED driving. A potential integrated primary side controller can be designed based on the proposed LED driving method. The energy channeling ripple cancellation LED driver has been proposed in chapter five to further reduce cost on the power stage circuit. In previous two ripple cancellation LED drivers, an additional DC-DC converter is needed to achieve ripple cancellation. A power transistor has been used in the energy channeling ripple cancellation LED driving design to successfully replace a separate DC-DC converter and therefore achieved lower cost. The detailed analysis supports the theory of the proposed ripple cancellation LED drivers. Simulation and experiment have also been included to verify the proposed ripple cancellation LED drivers.

Secure Transmission in Spectrum Sharing MIMO Networks with Generalized Antenna Selection over Nakagami-m Channels

In this paper, we investigate the secrecy outage performance of spectrum sharing multiple-input multiple-output networks using generalized transmit antenna selection with maximal ratio combining over Nakagami-m channels. In particular, the outdated channel state information is considered at the process of antenna selection due to feedback delay. Considering a practical passive eavesdropper scenario, we derive the exact and asymptotic closed-form expressions of secrecy outage probability, which enable us to evaluate the secrecy performance with high efficiency and present a new design insight into the impact of key parameters on the secrecy performance. In addition, the analytical results demonstrate that the achievable secrecy diversity order is only determined by the parameters of the secondary network, while other parameters related to primary or eavesdropper’s channels have a significantly impact on the secrecy coding gain. 

Design and Flux-Weakening Control of an Interior Permanent Magnet Synchronous Motor for Electric Vehicles

Permanent magnet synchronous motors (PMSMs) provide a competitive technology for EV traction drives owing to their high power density and high efficiency. In this paper, three types of interior PMSMs with different PM arrangements are modeled by the finite element method (FEM). For a given amount of permanent magnet materials, the V-shape interior PMSM is found better than the U-shape and the conventional rotor topologies for EV traction drives. Then the V-shape interior PMSM is further analyzed with the effects of stator slot opening and the permanent magnet pole chamfering on cogging torque and output torque performance. A vector-controlled flux-weakening method is developed and simulated in Matlab to expand the motor speed range for EV drive system. The results show good dynamic and steady-state performance with a capability of expanding speed up to four times of the rated. A prototype of the V-shape interior PMSM is also manufactured and tested to validate the numerical models built by the FEM.

Improving the Accuracy of 3-D Reconstruction in Robotic Vision Applications

Thesis (Ph.D.)--University of Washington, 2016-08

Repeated evolution of heat responsiveness among Brassicaceae COPIA transposable elements

Eukaryotic genomes contain repetitive DNA sequences. This includes simple repeats and more complex transposable elements (TEs). Many TEs reach high copy numbers in the host genome, owing to their amplification abilities by specific mechanisms. There is growing evidence that TEs contribute to gene transcriptional regulation. However, excess of TE activity may lead to reduced genome stability. Therefore, TEs are suppressed by the transcriptional gene silencing machinery via specific chromatin modifications. In contrary, effectiveness of the epigenetic silencing mechanisms imposes risk for TE survival in the host genome. Therefore, TEs may have evolved specific strategies for bypassing epigenetic control and allowing the emergence of new TE copies. Recent studies suggested that the epigenetic silencing can be, at least transiently, attenuated by heat stress in A. thaliana. Heat stress induced strong transcriptional activation of COPIA78 family LTR-retrotransposons named ONSEN, and even their transposition in mutants deficient in siRNA-biogenesis. ONSEN transcriptional activation was facilitated by the presence of heat responsive elements (HREs) within the long terminal repeats, which serve as a binding platform for the HEAT SHOCK FACTORs (HSFs). This thesis focused on the evolution of ONSEN heat responsiveness in Brassicaceae. By using whole-transcriptome sequencing approach, multiple Arabidopsis lyrata ONSENs with conserved heat response were found and together with ONSENs from other Brassicaceae were used to reconstruct the evolution of ONSEN HREs. This indicated ancestral situation with two, in palindrome organized, HSF binding motifs. In the genera Arabidopsis and Ballantinia, a local duplication of this locus increased number of HSF binding motifs to four, forming a high-efficiency HRE. In addition, whole transcriptome analysis revealed novel heat-responsive TE families COPIA20, COPIA37 and HATE. Notably, HATE represents so far unknown COPIA family which occurs in several Brassicaceae species but is absent in A. thaliana. Putative HREs were identified within the LTRs of COPIA20, COPIA37 and HATE of A. lyrata, and could be preliminarily validated by transcriptional analysis upon heat induction in subsequent survey of Brassicaeae species. Subsequent phylogenetic analysis indicated a repeated evolution of heat responsiveness within Brassicaceae COPIA LTR-retrotransposons. This indicates that acquisition of heat responsiveness may represent a successful strategy for survival of TEs within the host genome.

Semi-automatic parallelisation of unstructured mesh codes

The availability of CFD software that can easily be used and produce high efficiency on a wide range of parallel computers is extremely limited. The investment and expertise required to parallelise a code can be enormous. In addition, the cost of supercomputers forces high utilisation to justify their purchase, requiring a wide range of software. To break this impasse, tools are urgently required to assist in the parallelisation process that dramatically reduce the parallelisation time but do not degrade the performance of the resulting parallel software. In this paper we discuss enhancements to the Computer Aided Parallelisation Tools (CAPTools) to assist in the parallelisation of complex unstructured mesh-based computational mechanics codes.

Partition alignment in three dimensional unstructured mesh multi-physics modelling

Unstructured mesh codes for modelling continuum physics phenomena have evolved to provide the facility to model complex interacting systems. Parallelisation of such codes using single Program Multi Data (SPMD) domain decomposition techniques implemented with message passing has been demonstrated to provide high parallel efficiency, scalability to large numbers of processors P and portability across a wide range of parallel platforms. High efficiency, especially for large P requires that load balance is achieved in each parallel loop. For a code in which loops span a variety of mesh entity types, for example, elements, faces and vertices, some compromise is required between load balance for each entity type and the quantity of inter-processor communication required to satisfy data dependence between processors.

Evaluación de vetiver (Chrysopogon zizanioides) y la elefanta (Pennisetum purpureum) en el diseño de humedales artificiales

En este trabajo se presenta la descripción e investigación en la evaluación de vetiver (Chrysopogon zizanioides) y la elefanta (Pennisetum purpureum) en el diseño de humedales artificiales. Para el tratamiento de aguas residuales de origen doméstico, siendo la vegetación uno de los principales componentes de estos sistemas de tratamientos no convencionales. Muchos \sistemas naturales" están siendo considerados con el propósito del tratamiento del agua residual y control de la contaminación del agua, debido a su alta fiabilidad ambiental y los bajos costos de construcción y mantenimiento, es el caso de los humedales artificiales. El interés en los sistemas naturales está basado en la conservación de los recursos asociados con estos sistemas como opuesto al proceso de tratamiento convencional de aguas residuales que es intensivo respecto al uso de energía y químicos. Los wetlands o humedales artificiales constituyen una alternativa de tratamiento debido a su alta eficiencia de remoción de contaminantes, a su bajo costo de instalación y mantenimiento y a su alta fiabilidad ambiental, generalmente un humedal artificial esta constituido por un medio de soporte el cual generalmente es arena o grava, vegetación y microorganismos o biopelícula los cuales llevan los diferentes procesos bioquímicos para remover los contaminantes del afluente. El objetivo general de este trabajo ha sido: Evaluar la eficiencia de remoción de materia orgánica, sólidos, nitrógeno y fósforo total de dos especies de plantas: vetiver (Chrysopogon zizanioides) y la elefanta (Pennisetum purpureum), en el diseño de humedales artificiales para el tratamiento de aguas residuales de origen doméstico. Los humedales artificiales o sistemas pilotos, se encuentran ubicados en la universidad de Medellín y reciben una preparación de agua sintética, que asemeja a las características de un agua residual de origen doméstico. En el presente trabajo se evalúa el porcentaje de remoción de la carga orgánica de aguas residuales, en un sistema de tratamiento por humedales artificiales con dos especies vegetales. El sistema fue diseñado con tres módulos instalados de manera adjunta. En el primero no se integra ninguna especie vegetal, solo el medio de sustrato el cual constituye el blanco (-), en el segundo se integraron organismos de la especie vetiver (Chrysopogon zizanioides), en el tercer sistema piloto, organismos de la especie elefanta (Pennisetum purpureum) y en el cuarto organismos de la especie papiro japones (Cyperus alternifolius), los cuales constituyen el control positivo (+). Los módulos experimentales fueron limpiados, cortados y adecuados acorde al montaje inicial de las plantas y al espacio requerido para su disposición. A cada sistema piloto se le agrega medio de soporte constituido por grava (5 a 10 cm) y arena (15 a 20 cm), el sustrato es evaluado y caracterizado por su diámetro nominal, posterior en cada sistema se siembran las especies en un área de 3x3 y cada humedal por dos semanas se adecua bajo la solución de Hoagland y Arnon y régimen de humedad. En el agua sintética se analizaron los siguientes parámetros: pH, sólidos totales, sólidos suspendido totales, sólidos disueltos totales, demanda química de oxígeno (DQO), demanda bioquímica de oxígeno (DBO5), nitrógeno total (NTK) y fosforo total (PT). También se realizó la determinación del crecimiento de las plantas a partir del incremento de biomasa, porosidad de la raíz y de igual forma se determina NTK y PT. Los resultados demostraron que el sistema es una opción para la remoción de la carga orgánica y de nutrientes en aguas residuales de origen doméstico, de bajo costo de operación y mantenimiento, especialmente se observa que las plantas que crecen en sistemas de régimen de humedad ácuico y ústico, tienden a tener una mayor recepción y adaptación en los humedales artificiales pilotos, es el caso de la elefanta (Pennisetum purpureum), el cual presenta las más altas tasas de remoción de contaminantes y nutrientes en el afluente, seguido por el papiro japonés (Cyperus alternifolius) y el vetiver (Chrysopogon zizanioides), respecto a tasas de remoción. La remoción de contaminantes que se presentan más altos respectivamente, constituyen sólidos en primera instancia, seguido por la demanda bioquímica de oxigeno (DBO5), demanda química de oxígeno (DQO), nitrógeno total (NTK) y fósforo total (PT), estos últimos presentan una baja tasa de remoción, debido a la naturaleza misma del contaminante, a los organismos que realizan la remoción y absorción y al tiempo de retención que se elige, el cual influye en la tasa de remoción del contaminante siendo menor en la concentración de fósforo, pero se encuentranen el rango esperado para estos sistemas de tratamiento no convencionales.

Impacto del liderazgo de género en los estilos de dirección de las organizaciones

La investigación tuvo como objetivo conocer los rasgos de personalidad predominantes en un grupo de líderes y de igual manera describir el impacto de sus estilos de liderazgo de acuerdo al género. Metodológicamente, fue una investigación cuantitativa, descriptiva y con un diseño no experimental. La población se conformó por líderes de empresas con presencia en la ciudad de Medellín. Por un muestreo de tipo intencional, se seleccionaron 20 líderes a quienes se les aplicó una encuesta estructurada de acuerdo a los objetivos de la investigación. La incorporación de mujeres a posiciones directivas se perfila como una vía útil para aprovechar los recursos humanos disponibles, en situación de igualdad de oportunidades, la diversidad de estilos y la variabilidad individual. En los últimos años, la investigación acerca de las relaciones entre género y estilos de liderazgo ha insistido en la idea de reivindicar el papel de la mujer y su contribución al desarrollo de las organizaciones. Los resultados de la investigación permiten afirmar que la extraversión constituye uno de los rasgos de personalidad distintivos de la muestra investigada y del liderazgo carismático; también se obtuvieron puntajes relevantes en apertura, rasgo distintivo del liderazgo transformacional. La alta efectividad representa la fortaleza más importante de la muestra, conjuntamente con la marcada conducta de entrenar, dirigir y delegar. Las relaciones encontradas entre las variables indican asociación significativa entre hombres y mujeres que lideran en las organizaciones.

Relations entre la composition du lait et les facteurs alimentaires dans les troupeaux laitiers québécois

L’objectif général des travaux présentes dans cette thèse de doctorat était d’établir la relation entre l’alimentation et la composition du lait des vaches laitières, en mettant l’emphase sur les teneurs en matières grasses (TMG), sur l’urée du lait et sur l’efficience d’utilisation de l’azote. Pour la TMG, c’est principalement la relation entre cette teneur et la différence alimentaire cations-anions (DACA) qui a été investiguée. Une base de données de 2 142 troupeaux québécois a été utilisée et la relation entre la composition de la ration, incluant la DACA, et la TMG du lait a été déterminée à l’aide de régressions multiples. Il a été possible de prédire entre 32 et 66 % de la variation de la TMG du lait en fonction du stade de lactation. Malgré plusieurs interactions trouvées, une augmentation de la DACA, une supplémentation avec de l’acide palmitique et une distribution des aliments en ration totale mélangée ont eu une relation positive avec la TMG du lait, tandis qu’une augmentation de la proportion de concentrés dans la ration a eu un effet négatif. Les modèles développés ont montré l’importance de la gestion de l’alimentation sur la TMG du lait. En plus, ils ont démontré l’intérêt de considérer la DACA dans la formulation de rations chez la vache laitière. Dans une deuxième étude, la même base des données a été utilisée pour identifier les facteurs nutritionnels qui peuvent faire varier la teneur en urée du lait. Contrairement à ce qui est mentionné dans la littérature, tant des corrélations positives et que négatives entre les teneurs en urée du lait et en protéines des rations à l’intérieur des troupeaux sur une période de 36 mois ont été obtenues. Pour mieux comprendre ces relations, les résultats de performances et d’alimentation de 100 troupeaux avec des corrélations positives (r > 0,69) et de 100 troupeaux avec des corrélations négatives (r < -0,44) entre la teneur en urée du lait et en protéine brute de la ration ont été comparés. Les résultats n’ont pas montré de différences entre les deux groupes ni pour la composition de la ration, ni pour l’urée du lait. Ces résultats ne permettent pas d’identifier le meilleur contexte pour l’utilisation de la teneur en urée du lait comme un outil de gestion de l’alimentation. Ces observations soulèvent des questions sur la validité de l’utilisation des statistiques d’alimentation provenant de la base de données utilisée pour des évaluations nutritionnelles plus spécifiques. Considérant les résultats du projet précédent, le dernier projet visait à mieux comprendre les caractéristiques des fermes avec différentes efficiences d’utilisation de l’azote en utilisant des données plus fiables. Ainsi, 100 fermes laitières au Québec ont été visitées pour recueillir les données de production, de consommation d’aliments et de gestion de leur troupeau. Ces fermes ont été divisées en quatre groupes par une analyse en grappes selon leur efficience d’utilisation de l’azote. La comparaison entre les groupes a montré que les fermes dans les groupes avec une plus haute efficience d’utilisation d’azote ont une production laitière moyenne par vache plus élevée. Pour les stratégies d’alimentation, les fermes plus efficientes donnent plus d’énergie, mais moins de protéines brutes que les fermes des groupes moins efficients. Les résultats ont également montré l’importance de la prise alimentaire des vaches sur l’efficience d’utilisation de l’azote puisque les fermes des groupes avec la plus grande efficience étaient également celles avec la plus faible prise alimentaire. Aussi, les résultats n’ont pas permis d’établir clairement la relation entre la teneur en urée du lait et l’efficience de l’utilisation de l’azote. En effet, des valeurs différentes pour l’urée du lait étaient obtenues entre le groupe plus efficient et le moins efficient, mais la faible ampleur de variation de l’efficience d’utilisation de l’azote des groupes intermédiaires n’a pas permis d’observer de différences pour l’urée du lait. Finalement, outre une réduction des risques de pollution, les fermes des groupes plus efficaces pour l’utilisation de l’azote étaient également celles avec la marge sur les coûts d’alimentation par les vaches plus élevées. Par conséquent, il y a aussi un intérêt économique à améliorer l’efficience de l’utilisation de l’azote sur les fermes.