Avaliação da mineralização de arroz em sistema de refluxo para a determinação de Cu, Fe, Mn e Zn por FAAS

This paper describes the evaluation of a new method of sample preparation using a cold finger system with continuous water flow for rice analysis by flame atomic absorption spectrometry. The limits of detection for Cu, Fe, Mn and Zn for the proposed method were 0.36, 1.84, 2.12 and 0.16 mg kg-1, respectively. The RSDs were lower than 6.0% for all elements and the CRM analyzed showed values with 95% agreement. The proposed method is simple and safe for the proposed objective and does not require the use of mixtures of acid or special equipment for sample preparation.

Gray mold severity and vase life of rose buds after pulsing with citric acid, salicylic acid, calcium sulfate, sucrose and silver thiosulfate

Gray mold of roses (Rosa hibrida) caused by Botrytis cinerea requires many management strategies for its control. The effect of pulsing rose cv. Kiss with solutions of citric acid, salicylic acid, sucrose, calcium sulfate, and silver thiosulfate (STS) on disease severity and vase life of the flowers was evaluated. The solutions were applied to cut stems at different stages of harvest, the variation in the opening stage of harvest did not affect the results. Pulsing with STS reduced the values of area under the disease progress curve (AUDPC) and of severity of disease by 15% and 55%, respectively, and increased the vase life of the flowers by 20%. Calcium sulfate consistently reduced AUDPC by 66% and maximum severity by 88%, and increased vase life of the flowers by 37%. Therefore, pulsing rose buds with solutions of STS and calcium sulfate is potentially useful in reducing losses due to gray mold after harvest and in extending the vase life.

Genetic regulatory networks in avian B cells

Biology is turning into an information science. The science of systems biology seeks to understand the genetic networks that govern organism development and functions. In this study the chicken was used as a model organism in the study of B cell regulatory factors. These studies open new avenues for plasma cell research by connecting the down regulation of the B cell gene expression program directly to the initiation of plasma cell differentiation. The unique advantages of the DT40 avian B cell model system, specifically its high homologous recombination rate, were utilized to study gene regulation in Pax5 knock out cell lines and to gain new insights into the B cell to plasma cell transitions that underlie the secretion of antibodies as part of the adaptive immune response. The Pax5 transcription factor is central to the commitment, development and maintenance of the B cell phenotype. Mice lacking the Pax5 gene have an arrest in development at the pro-B lymphocyte stage while DT40 cells have been derived from cells at a more mature stage of development. The DT40 Pax5-/- cells exhibited gene expression similarities with primary chicken plasma cells. The expression of the plasma cell transcription factors Blimp-1 and XBP-1 were significantly upregulated while the expression of the germinal centre factor BCL6 was diminished in Pax5-/- cells, and this alteration was normalized by Pax5 re-introduction. The Pax5-deficient cells further manifested substantially elevated secretion of IgM into the supernatant, another characteristic of plasma cells. These results for the first time indicated that the downregulation of the Pax5 gene in B cells promotes plasma cell differentiation. Cross-species meta-analysis of chicken and mouse Pax5 gene knockout studies uncovers genes and pathways whose regulatory relationship to Pax5 has remained unchanged for over 300 million years. Restriction of the hematopoietic stem cell fate to produce T, B and NK cell lineages is dependent on the Ikaros and its molecular partners, the closely related Helios and Aiolos. Ikaros family members are zinc finger proteins which act as transcriptional repressors while helping to activate lymphoid genes. Helios in mice is expressed from the hematopoietic stem cell level onwards, although later in development its expression seems to predominate in the T cell lineage. This study establishes the emergence and sequence of the chicken Ikaros family members. Helios expression in the bursa of Fabricius, germinal centres and B cell lines suggested a role for Helios in the avian B-cell lineage, too. Phylogenetic studies of the Ikaros family connect the expansion of the Ikaros family, and thus possibly the emergence of the adaptive immune system, with the second round of genome duplications originally proposed by Ohno. Paralogs that have arisen as a result of genome-wide duplications are sometimes termed ohnologs – Ikaros family proteins appear to fit that definition. This study highlighted the opportunities afforded by the genome sequencing efforts and somatic cell reverse genetics approaches using the DT40 cell line. The DT40 cell line and the avian model system promise to remain a fruitful model for mechanistic insight in the post-genomic era as well.

Análise do perfil de expressão dos genes da cana-de-açúcar envolvidos na interação com Leifsonia xyli subsp: xyli

Utilizando a técnica de macroarranjos de cDNA em membranas de náilon, analisou-se o perfil de expressão de 3.575 ESTs ("Expressed Sequence Tags") de cana-de-açúcar, oriundas do projeto SUCEST, em duas variedades, uma tolerante (SP80-0185) e outra suscetível (SP70-3370) ao Raquitismo da Soqueira. Foram analisadas amostras foliares de plantas inoculadas com Leifsonia xyli subsp. xyli., agente etiológico do Raquitismo, contrastadas com plantas não inoculadas (controle), para cada variedade, marcadas com sondas de cDNA e hibridizadas contra os macroarranjos. Após as hibridizações e análises estatísticas dos dados foi possível identificar 49 ESTs com expressão alterada, sendo 44 na variedade tolerante (41 ESTs induzidos e 3 reprimidos) e 5 na variedade suscetível (2 ESTs induzidos e 3 reprimidos). Os resultados obtidos sugerem que a tolerância da variedade SP80-0185 de cana-de-açúcar à bactéria fitopatogênica pode estar relacionada com a percepção de sinais extracelulares, visto que ESTs relacionados a vias de transdução de sinais apresentaram expressão gênica induzida na variedade tolerante, os quais codificam para uma EST com similaridade à H+-ATPase da membrana plasmática, fatores de transcrição G-box, OsNAC6, "DNA binding", família MYB e "Zinc Finger" e ainda uma EST com similaridade ao fator de ligação ao G-Box, o qual corresponde a uma seqüência de DNA cis presente em vários promotores de plantas e requerido para o reconhecimento de muitos estímulos ambientais. Na variedade suscetível foi reprimido uma EST com similaridade à lipase. Esta enzima, também de membrana, faz parte da síntese do jasmonato, o qual ativa as defesas vegetais contra patógenos de plantas. Possíveis funções para os genes induzidos ou reprimidos nas cultivares de cana tolerante ou resistente ao Raquitismo são discutidas neste trabalho.

Banda gástrica ajustável laparoscópica: alternativa técnica

In these paper we are presenting a technical alternative to laparoscopic adjustable gastric banding. From January 1999 to April 2000, 60 patients with mean body mass index (BMI) of 40,7 kg/m2 underwent laparoscopic adjustable gastric banding. The new technique is performed in two steps. In the first step, an isolation instrument (laparoscopic finger) is inserted through the lesser sac, next to the junction of diaphragmatic crura, including the lesser omentum in order to pull the band catheter. The second step separates the lesser omentum from the right side of the stomach.There was no mortality and the morbidity was 11,6% (1 slippage of the band and 6 trocar port seroma). The new technique was performed in all patients with no conversion to open procedure. We didn't have respiratory complications. This technical alternative is safe and easily performed, helping to prevent transoperative perforations.

Saksan kielen ja automaatiotekniikan perusteiden oppimisen yhteensovittaminen : Brückenschlag zwischen Automatisierung und Deutsch als Fremdsprache

Artikkelin kieli: finger

Obesidade como fator de risco para a falha da cirurgia de Burch

OBJETIVO: observar o impacto da obesidade e de outros fatores de risco sobre a taxa de falha das pacientes submetidas à cirurgia de Burch para tratamento da incontinência urinária. MÉTODOS: estudo de casos de pacientes submetidas à cirurgia de Burch no período de 1992 a 2003. As pacientes foram avaliadas no momento da segunda consulta pós-operatória (66 dias em média) e com um ano de acompanhamento, e classificadas em dois grupos: Continentes e Não Continentes. As variáveis analisadas foram: idade, paridade, índice de massa corpórea (IMC), tempo de menopausa, tempo de terapia de reposição hormonal, avaliação urodinâmica, história de infecção do trato urinário, cirurgia prévia para incontinência urinária, diabetes, cistocele e prolapso uterino, tempo de internação, necessidade de autossondagem, micção espontânea no pós-operatório e ferida operatória. Os dados foram analisados com o pacote estatístico Statistical Package for Social Sciences 14.0. Foram utilizados o teste τ de Student ou Mann-Whitney, para comparação das variáveis contínuas, e os testes exato de Fisher e χ2, para variáveis categóricas (p<0,05). RESULTADOS: no momento da segunda avaliação pós-operatória, não houve diferença significativa entre os dois grupos quanto às variáveis analisadas. Com um ano de seguimento, de um total de 97 pacientes, 81 apresentavam-se continentes e 16, não continentes, sendo o IMC e a altura diferentes entre os grupos. No Grupo Continente, o IMC médio foi 27,1 e a altura de 1,57 m e, no Não Continente, 30,8 (p=0,02) e 1,52 m (p=0,01). A Odds Ratio para IMC>30 foi 3,7 (IC95%=1,2-11,5). CONCLUSÕES: a obesidade mostrou-se um importante fator de risco para a falha da cirurgia no primeiro ano de acompanhamento. Os resultados demonstram que pacientes com IMC>30 têm chance 3,7 vezes maior de apresentarem-se não continentes após um ano da cirurgia de Burch em relação às não obesas.

Frequência do Papilomavírus Humano na placenta, no colostro e no sangue do cordão umbilical

OBJETIVO: Determinar a frequência do Papilomavírus Humano (HPV) na placenta, no colostro e no sangue do cordão umbilical de parturientes e seus neonatos atendidos no Ambulatório de Ginecologia e Obstetrícia do Hospital Universitário de Rio Grande (RS), Brasil. MÉTODOS: Foram coletadas biópsias de 150 placentas do lado materno, 150 do lado fetal, 138 amostras do sangue do cordão umbilical e 118 amostras de colostro. As biópsias de placenta foram coletadas da porção central e periférica. O DNA foi extraído segundo protocolo do fabricante e conforme referência encontrada na literatura. O HPV foi detectado pela técnica da reação em cadeia da polimerase aninhada (PCR-Nested) com os primers MY09/11 e GP5/GP6. A genotipagem foi por sequenciamento direto. As participantes responderam a um questionário autoaplicado com dados demográficos e clínicos, a fim de caracterizar a amostra. RESULTADOS: O HPV foi detectado em 4% (6/150) do lado materno das placentas, 3,3% (5/150) do lado fetal; 2,2% (3/138) no sangue do cordão e 0,8% (1/118) no colostro. A taxa de transmissão vertical foi de 50%. O genótipo de baixo risco oncogênico encontrado foi o HPV-6 (60%) e de alto risco, os HPV-16 e HPV-18 (20% cada). CONCLUSÕES: Esses resultados sugerem que o HPV pode infectar a placenta, o colostro e o sangue do cordão umbilical.

Integrins on the move

Cancer is a leading cause of death worldwide accounting for 13% of all deaths in 2005. The spread of cancer and formation of metastases is the major cause of mortality among cancer patients. The spread of cancer is based on the cancer cell’s ability to break away from the surrounding tissue and to migrate into new areas in the body. The ability of cells to bind its surroundings and to move is controlled by the mechanical cell surface adhesion receptors called the integrins. Integrins have a critical role in cell adhesion, cell motility and tissue homeostasis. By communicating with ECM, integrins transmit signals from the surrounding environment inside the cell and modulate the function of many important signalling pathways involved in cell survival, development, gene expression, proliferation, motility and cytoskeletal organization. During cell migration integrin-matrix adhesions are formed in front of the cell while rear-adhesions are released during migration. Integrins are endocytosed from the plasma-membrane into the cytoplasm and partly recycled back to new adhesion sites in a process called integrin trafficking. Also, the cell cytoskeleton and protrusions are important in cell migration. Finger-like actin protrusions called filopodia display an interesting cancer relevant cooperation with integrins that is required for cell migration. The expression and function of integrins changes markedly as cells acquire carcinogenic properties. Changed integrin function is partly responsible for detachment of tumor cells from neighbouring cells and for providing enhanced invasive capabilities for tumor cells to disseminate. Similarly, the formation of filopodia is increased in cancer. High myosin-10 expression is related to poor outcome in breast cancer and increased cell migration. The proper function of myosin-10 induced filopodia needs association with β1 integrins. The importance of integrin trafficking and filopodia formation is becoming increasingly more recognized in cancer. This thesis focusses on the role of integrins, integrin trafficking and myosin-10 induced filopodia cancer cell migration.

Identification of Some Additional Loss Components in High-Power Low-Voltage Permanent Magnet Generators

Permanent magnet generators (PMG) represent the cutting edge technology in modern wind mills. The efficiency remains high (over 90%) at partial loads. To improve the machine efficiency even further, every aspect of machine losses has to be analyzed. Additional losses are often given as a certain percentage without providing any detailed information about the actual calculation process; meanwhile, there are many design-dependent losses that have an effect on the total amount of additional losses and that have to be taken into consideration. Additional losses are most often eddy current losses in different parts of the machine. These losses are usually difficult to calculate in the design process. In this doctoral thesis, some additional losses are identified and modeled. Further, suggestions on how to minimize the losses are given. Iron losses can differ significantly between the measured no-load values and the loss values under load. In addition, with embedded magnet rotors, the quadrature-axis armature reaction adds losses to the stator iron by manipulating the harmonic content of the flux. It was, therefore, re-evaluated that in salient pole machines, to minimize the losses and the loss difference between the no-load and load operation, the flux density has to be kept below 1.5 T in the stator yoke, which is the traditional guideline for machine designers. Eddy current losses may occur in the end-winding area and in the support structure of the machine, that is, in the finger plate and the clamping ring. With construction steel, these losses account for 0.08% of the input power of the machine. These losses can be reduced almost to zero by using nonmagnetic stainless steel. In addition, the machine housing may be subjected to eddy current losses if the flux density exceeds 1.5 T in the stator yoke. Winding losses can rise rapidly when high frequencies and 10–15 mm high conductors are used. In general, minimizing the winding losses is simple. For example, it can be done by dividing the conductor into transposed subconductors. However, this comes with the expense of an increase in the DC resistance. In the doctoral thesis, a new method is presented to minimize the winding losses by applying a litz wire with noninsulated strands. The construction is the same as in a normal litz wire but the insulation between the subconductors has been left out. The idea is that the connection is kept weak to prevent harmful eddy currents from flowing. Moreover, the analytical solution for calculating the AC resistance factor of the litz-wire is supplemented by including an end-winding resistance in the analytical solution. A simple measurement device is developed to measure the AC resistance in the windings. In the case of a litz-wire with originally noninsulated strands, vacuum pressure impregnation (VPI) is used to insulate the subconductors. In one of the two cases studied, the VPI affected the AC resistance factor, but in the other case, it did not have any effect. However, more research is needed to determine the effect of the VPI on litz-wire with noninsulated strands. An empirical model is developed to calculate the AC resistance factor of a single-layer formwound winding. The model includes the end-winding length and the number of strands and turns. The end winding includes the circulating current (eddy currents that are traveling through the whole winding between parallel strands) and the main current. The end-winding length also affects the total AC resistance factor.

Osteology and radiographic anatomy of the hind limbs in Marshdeer (Blastocerus dichotomus)

Abstract: The knowledge of anatomical structures found in wild animals is important for the practice of medical and surgical clinic. Thus, the aim of this study was to describe the osteology and radiographic anatomy of the femur, patella, tibia, fibula, tarsal, metatarsal and phalanges of the Marshdeer Blastocerus dichotomus as a reference for clinical use and species identification. Most structures were similar to those found in domestic animals, with special features of this species. Noteworthy is, for example, the absence of the third trochanter of the femur. Although a ruminant, the Marshdeer has a fibuyla similar to the one described for the horse. B. dichotomus has four fingers on each limb, formed through three phalanges, only the third and fourth finger touch the ground, and the second and fifth finger is rudimentary. It has four proximal and two distal sesamoid bones, and sesamoid bones near the gastrocnemius muscle do not exist.

Some biological aspects of the weed Lesser celandine (Ranunculus ficaria)

Lesser celandine (Ranunculaceae) is a perennial weed with tuberous root. Tubers are the most important means of reproduction and dispersion of this weed. In recent years, it has spread into wheat fields in Western Iran, mainly in the Lorestan province. A series of experiments were conducted to determine cardinal temperatures and to study the effects of pre-chilling, temperature fluctuations, tuber size, freezing and drying on germination of the tubers, as well as the effect of planting depth on sprouting of the tubers. The results obtained showed that the highest percentage of germination occurred when tubers were stored for more than 2 weeks at 4 or 8 ºC. The optimum temperature for germination differed in large and small tubers (8 and 14oC, respectively). Germination was the highest (almost 100%) at temperature fluctuations of 5-10oC. Germination of the finger-like and small tubers was the highest (95%); however, very small, small, and broken tubers showed the lowest germination percentage. In the freezing experiment, decreasing the temperature and increasing the storage duration decreased the germination of tubers. Increasing the osmotic potential and temperature resulted in decreased tuber germination of Lesser celandine. Lesser celandine could sprout down to 20 cm depth but heat demand for tubers from superficial depth was smaller than for tubers planted at greater depth.

Post-processing and analysis of tracked hand trajectories

In this thesis, the suitability of different trackers for finger tracking in high-speed videos was studied. Tracked finger trajectories from the videos were post-processed and analysed using various filtering and smoothing methods. Position derivatives of the trajectories, speed and acceleration were extracted for the purposes of hand motion analysis. Overall, two methods, Kernelized Correlation Filters and Spatio-Temporal Context Learning tracking, performed better than the others in the tests. Both achieved high accuracy for the selected high-speed videos and also allowed real-time processing, being able to process over 500 frames per second. In addition, the results showed that different filtering methods can be applied to produce more appropriate velocity and acceleration curves calculated from the tracking data. Local Regression filtering and Unscented Kalman Smoother gave the best results in the tests. Furthermore, the results show that tracking and filtering methods are suitable for high-speed hand-tracking and trajectory-data post-processing.

The modulation of simple reaction time by the spatial probability of a visual stimulus

Simple reaction time (SRT) in response to visual stimuli can be influenced by many stimulus features. The speed and accuracy with which observers respond to a visual stimulus may be improved by prior knowledge about the stimulus location, which can be obtained by manipulating the spatial probability of the stimulus. However, when higher spatial probability is achieved by holding constant the stimulus location throughout successive trials, the resulting improvement in performance can also be due to local sensory facilitation caused by the recurrent spatial location of a visual target (position priming). The main objective of the present investigation was to quantitatively evaluate the modulation of SRT by the spatial probability structure of a visual stimulus. In two experiments the volunteers had to respond as quickly as possible to the visual target presented on a computer screen by pressing an optic key with the index finger of the dominant hand. Experiment 1 (N = 14) investigated how SRT changed as a function of both the different levels of spatial probability and the subject's explicit knowledge about the precise probability structure of visual stimulation. We found a gradual decrease in SRT with increasing spatial probability of a visual target regardless of the observer's previous knowledge concerning the spatial probability of the stimulus. Error rates, below 2%, were independent of the spatial probability structure of the visual stimulus, suggesting the absence of a speed-accuracy trade-off. Experiment 2 (N = 12) examined whether changes in SRT in response to a spatially recurrent visual target might be accounted for simply by sensory and temporally local facilitation. The findings indicated that the decrease in SRT brought about by a spatially recurrent target was associated with its spatial predictability, and could not be accounted for solely in terms of sensory priming.

Mental rotation of anthropoid hands: a chronometric study

It has been shown that mental rotation of objects and human body parts is processed differently in the human brain. But what about body parts belonging to other primates? Does our brain process this information like any other object or does it instead maximize the structural similarities with our homologous body parts? We tried to answer this question by measuring the manual reaction time (MRT) of human participants discriminating the handedness of drawings representing the hands of four anthropoid primates (orangutan, chimpanzee, gorilla, and human). Twenty-four right-handed volunteers (13 males and 11 females) were instructed to judge the handedness of a hand drawing in palm view by pressing a left/right key. The orientation of hand drawings varied from 0º (fingers upwards) to 90º lateral (fingers pointing away from the midline), 180º (fingers downwards) and 90º medial (finger towards the midline). The results showed an effect of rotation angle (F(3, 69) = 19.57, P < 0.001), but not of hand identity, on MRTs. Moreover, for all hand drawings, a medial rotation elicited shorter MRTs than a lateral rotation (960 and 1169 ms, respectively, P < 0.05). This result has been previously observed for drawings of the human hand and related to biomechanical constraints of movement performance. Our findings indicate that anthropoid hands are essentially equivalent stimuli for handedness recognition. Since the task involves mentally simulating the posture and rotation of the hands, we wondered if "mirror neurons" could be involved in establishing the motor equivalence between the stimuli and the participants' own hands.