Welding time models for cost calculations in the early stages of the design process

It is generally accepted that between 70 and 80% of manufacturing costs can be attributed to design. Nevertheless, it is difficult for the designer to estimate manufacturing costs accurately, especially when alternative constructions are compared at the conceptual design phase, because of the lack of cost information and appropriate tools. In general, previous reports concerning optimisation of a welded structure have used the mass of the product as the basis for the cost comparison. However, it can easily be shown using a simple example that the use of product mass as the sole manufacturing cost estimator is unsatisfactory. This study describes a method of formulating welding time models for cost calculation, and presents the results of the models for particular sections, based on typical costs in Finland. This was achieved by collecting information concerning welded products from different companies. The data included 71 different welded assemblies taken from the mechanical engineering and construction industries. The welded assemblies contained in total 1 589 welded parts, 4 257 separate welds, and a total welded length of 3 188 metres. The data were modelled for statistical calculations, and models of welding time were derived by using linear regression analysis. Themodels were tested by using appropriate statistical methods, and were found to be accurate. General welding time models have been developed, valid for welding in Finland, as well as specific, more accurate models for particular companies. The models are presented in such a form that they can be used easily by a designer, enabling the cost calculation to be automated.

Live trapping design for the harvest mouse (Micromys minutus) in its summer habitat

documented accurately since 1960. Most records are based on nest findings and there have been few direct observations or captures, mainly because live trapping of this species is not simple. Therefore, an efficient trapping technique is needed for population studies and to facilitate the management of its habitat. By combining the methods used to capture very small (Suncus etruscus) and climbing (Muscardinus avellanarius) mammals, we developed a design using Longworth traps with mouse excluders set on suspended platforms. This allowed us to trap more harvest mice in four field sessions of 60 trap-nights than have ever been caught previously since its discovery in Switzerland.

Design and implementation of FPGA-based LQ control of active magnetic bearings

The need for high performance, high precision, and energy saving in rotating machinery demands an alternative solution to traditional bearings. Because of the contactless operation principle, the rotating machines employing active magnetic bearings (AMBs) provide many advantages over the traditional ones. The advantages such as contamination-free operation, low maintenance costs, high rotational speeds, low parasitic losses, programmable stiffness and damping, and vibration insulation come at expense of high cost, and complex technical solution. All these properties make the use of AMBs appropriate primarily for specific and highly demanding applications. High performance and high precision control requires model-based control methods and accurate models of the flexible rotor. In turn, complex models lead to high-order controllers and feature considerable computational burden. Fortunately, in the last few years the advancements in signal processing devices provide new perspective on the real-time control of AMBs. The design and the real-time digital implementation of the high-order LQ controllers, which focus on fast execution times, are the subjects of this work. In particular, the control design and implementation in the field programmable gate array (FPGA) circuits are investigated. The optimal design is guided by the physical constraints of the system for selecting the optimal weighting matrices. The plant model is complemented by augmenting appropriate disturbance models. The compensation of the force-field nonlinearities is proposed for decreasing the uncertainty of the actuator. A disturbance-observer-based unbalance compensation for canceling the magnetic force vibrations or vibrations in the measured positions is presented. The theoretical studies are verified by the practical experiments utilizing a custom-built laboratory test rig. The test rig uses a prototyping control platform developed in the scope of this work. To sum up, the work makes a step in the direction of an embedded single-chip FPGA-based controller of AMBs.

The health promotion model and rare disease patients : a mixed methods study examining adherence to treatment in men with congenital hypogonadotropic hypogonadism

Rare diseases are typically chronic medical conditions of genetic etiology characterized by low prevalence and high complexity. Patients living with rare diseases face numerous physical, psychosocial and economic challenges that place them in the realm of health disparities. Congenital hypogonadotropic hypogonadism (CHH) is a rare endocrine disorder characterized by absent puberty and infertility. Little is known about the psychosocial impact of CHH on patients or their adherence to available treatments. This project aimed to examine the relationship between illness perceptions, depressive symptoms and adherence to treatment in men with CHH using the nursing-sensitive Health Promotion Model (HPM). A community based participatory research (CBPR) framework was employed as a model for empowering patients and overcoming health inequities. The study design used a sequential, explanatory mixed-methods approach. To reach dispersed CHH men, we used web-based recruitment and data collection (online survey). Subsequently, three patient focus groups were conducted to provide explanatory insights into the online survey (i.e. barriers to adherence, challenges of CHH, and coping/support) The online survey (n=101) revealed that CHH men struggle with adherence and often have long gaps in care (40% >1 year). They experience negative psychosocial consequences because of CHH and exhibit significantly increased rates of depression (p<0.001). Focus group participants (n=26) identified healthcare system, interpersonal, and personal factors as barriers to adherence. Further, CHH impacts quality of life and impedes psychosexual development in these men. The CHH men are active internet users who rely on the web forcrowdsourcing solutions and peer-to-peer support. Moreover, they are receptive to web-based interventions to address unmet health needs. This thesis contributes to nursing knowledge in several ways. First, it demonstrates the utility of the HPM as a valuable theoretical construct for understanding medication adherence and for assessing rare disease patients. Second, these data identify a range of unmet health needs that are targets for patient-centered interventions. Third, leveraging technology (high-tech) effectively extended the reach of nursing care while the CBPR approach and focus groups (high-touch) served as concurrent nursing interventions facilitating patient empowerment in overcoming health disparities. Last, these findings hold promise for developing e-health interventions to bridge identified shortfalls in care and activating patients for enhanced self- care and wellness -- Les maladies rares sont généralement de maladies chroniques d'étiologie génétique caractérisées par une faible prévalence et une haute complexité de traitement. Les patients atteints de maladies rares sont confrontés à de nombreux défis physiques, psychosociaux et économiques qui les placent dans une posture de disparité et d'inégalités en santé. L'hypogonadisme hypogonadotrope congénital (CHH) est un trouble endocrinien rare caractérisé par l'absence de puberté et l'infertilité. On sait peu de choses sur l'impact psychosocial du CHH sur les patients ou leur adhésion aux traitements disponibles. Ce projet vise à examiner la relation entre la perception de la maladie, les symptômes dépressifs et l'observance du traitement chez les hommes souffrant de CHH. Cette étude est modélisée à l'aide du modèle de la Promotion de la santé de Pender (HPM). Le cadre de l'approche communautaire de recherche participative (CBPR) a aussi été utilisé. La conception de l'étude a reposé sur une approche mixte séquentielle. Pour atteindre les hommes souffrant de CHH, un recrutement et une collecte de données ont été organisées électroniquement. Par la suite, trois groupes de discussion ont été menées avec des patients experts impliqués au sein d'organisations reliés aux maladies rares. Ils ont été invités à discuter certains éléments additionnels dont, les obstacles à l'adhésion au traitement, les défis généraux de vivre avec un CHH, et l'adaptation à la maladie en tenant compte du soutien disponible. Le sondage en ligne (n = 101) a révélé que les hommes souffrant de CHH ont souvent de longues périodes en rupture de soins (40% > 1 an). Ils vivent des conséquences psychosociales négatives en raison du CHH et présentent une augmentation significative des taux de dépression (p <0,001). Les participants aux groupes de discussion (n = 26) identifient dans l'ordre, les systèmes de soins de santé, les relations interpersonnelles, et des facteurs personnels comme des obstacles à l'adhésion. En outre, selon les participants, le CHH impacte négativement sur leur qualité de vie générale et entrave leur développement psychosexuel. Les hommes souffrant de CHH se considèrent être des utilisateurs actifs d'internet et comptent sur le web pour trouver des solutions pour trouver des ressources et y recherchent le soutien de leurs pairs (peer-to-peer support). En outre, ils se disent réceptifs à des interventions qui sont basées sur le web pour répondre aux besoins de santé non satisfaits. Cette thèse contribue à la connaissance des soins infirmiers de plusieurs façons. Tout d'abord, elle démontre l'utilité de la HPM comme une construction théorique utile pour comprendre l'adhésion aux traitements et pour l'évaluation des éléments de promotion de santé qui concernent les patients atteints de maladies rares. Deuxièmement, ces données identifient une gamme de besoins de santé non satisfaits qui sont des cibles pour des interventions infirmières centrées sur le patient. Troisièmement, méthodologiquement parlant, cette étude démontre que les méthodes mixtes sont appropriées aux études en soins infirmiers car elles allient les nouvelles technologies qui peuvent effectivement étendre la portée des soins infirmiers (« high-tech »), et l'approche CBPR par des groupes de discussion (« high-touch ») qui ont facilité la compréhension des difficultés que doivent surmonter les hommes souffrant de CHH pour diminuer les disparités en santé et augmenter leur responsabilisation dans la gestion de la maladie rare. Enfin, ces résultats sont prometteurs pour développer des interventions e-santé susceptibles de combler les lacunes dans les soins et l'autonomisation de patients pour une meilleure emprise sur les auto-soins et le bien-être.

Psychosexual development in men with congenital hypogonadotropic hypogonadism on long-term treatment: a mixed methods study.

INTRODUCTION: Congenital hypogonadotropic hypogonadism (CHH) is a rare, genetic, reproductive endocrine disorder characterized by absent puberty and infertility. Limited information is available on the psychosocial impact of CHH and psychosexual development in these patients. AIM: The aim of this study was to determine the impact of CHH on psychosexual development in men on long-term treatment. METHODS: A sequential mixed methods explanatory design was used. First, an online survey (quantitative) was used to quantify the frequency of psychosexual problems among CHH men. Second, patient focus groups (qualitative) were conducted to explore survey findings in detail and develop a working model to guide potential nursing and interdisciplinary interventions. MAIN OUTCOME MEASURES: Patient characteristics, frequency of body shame, difficulty with intimate relationships, and never having been sexually active were assessed. Additionally, we collected subjective patient-reported outcomes regarding the impact of CHH on psychological/emotional well-being, intimate relationships, and sexual activity. RESULTS: A total of 101 CHH men on long-term treatment (>1 year) were included for the analysis of the online survey (mean age 37 ± 11 years, range 19-66, median 36). Half (52/101, 51%) of the men had been seen at a specialized academic center and 37/101 (37%) reported having had fertility-inducing treatment. A high percentage of CHH men experience psychosexual problems including difficulty with intimate relationships (70%) and body image concerns/body shame (94/101, 93%), and the percentage of men never having been sexually active is five times the rate in a reference group (26% vs. 5.4%, P < 0.001). Focus groups revealed persisting body shame and low self-esteem despite long-term treatment that has lasting impact on psychosexual functioning. CONCLUSIONS: CHH men frequently experience psychosexual problems that pose barriers to intimate relationships and initiating sexual activity. These lingering effects cause significant distress and are not ameliorated by long-term treatment. Psychosexual assessment in CHH men with appropriate psychological support and treatment should be warranted in these patients. Dwyer AA, Quinton R, Pitteloud N, and Morin D. Psychosexual development in men with congenital hypogonadotropic hypogonadism on long-term treatment: A mixed methods study. Sex Med 2015;3:32-41.

Design of User Authentication System for Multi-operator wireless LANs

Langattomat lähiverkot ovat viime vuosikymmeninä saavuttaneet suuren suosion. Tässä työssä käsitellään käyttäjien todentamisjärjestelmän suunnittelua ja kehitystä langattomaan monioperaattoriverkkoon. Langattomassa monioperaattoriverkossa käyttäjillä on mahdollisuus käyttää eri operaattoreiden palveluita. Aluksi käsitellään olemassa olevia todentamismenetelmiä ja -järjestelmiä. minkä jälkeen kuvaillaan todentamisjärjestelmä langattomille monioperaattoriverkoille. Todentamisjärjestelmän ratkaisuvaihtoehtoja esitellään kaksi, niin sanotut moni- istunto - ja yksittäisistuntomalli. Moni-istuntomalli on normaali lähestymistapa käyttäjien todentamiseen tietokonejärjestelmissä. Siinä käyttäjän pitää tunnistautua ja todentaa itsensä jokaiselle verkon palvelulle erikseen. Yksittäisistuntomallissa pyritään parempaan luotettavuuteen ja käytettävyyteen. Siinä käyttäjä todentaa itsensä vain kerran ja voi sen jälkeen päästä useisiin palveluihin. Työn loppuosassa kuvaillaan suunnitellun järjestelmän toteutusta. Lisäksi ehdotetaan vaihtoehtoisia toteutustapoja, analysoidaan järjestelmän heikkouksia ja kerrotaan jatkokehitysmahdoillisuuksista.

Product information management system design framework for production oriented company

Diplomityössä luodaan viitekehys tuotetiedonhallintajärjestelmän esisuunnittelua varten. Siinä on kolme ulottuvuutta: lisäarvontuotto-, toiminnallisuus- ja ohjelmistoulottuvuus. Viitekehys auttaa- tunnistamaan lisäarvontuottokomponentit, joihin voidaan vaikuttaa tiettyjen ohjelmistoluokkien tarjoamilla tuotetiedonhallintatoiminnallisuuksilla. Viitekehyksen järjestelmäsuunnittelullista näkökulmaa hyödynnetään tutkittavissa yritystapauksissa perustuen laskentamatriisin muotoon mallinnettuihin ulottuvuuksien välisiin suhteisiin. Matriisiin syötetään lisäarvontuotto- ja toiminnallisuuskomponenttien saamat tärkeydet kohdeyrityksessä suoritetussa haastattelututkimuksessa. Matriisin tuotos on tietyn ohjelmiston soveltuvuus kyseisen yrityksen tapauksessa. Soveltuvuus on joukko tunnuslukuja, jotka analysoidaan tulostenkäsittelyvaiheessa. Soveltuvuustulokset avustavat kohdeyritystä sen valitessa lähestymistapaansa tuotetiedonhallintaan - ja kuvaavat esisuunnitellun tuotetiedonhallintajärjestelmän. Viitekehyksen rakentaminen vaatii perinpohjaisen lähestymistavan merkityksellisten lisäarvontuotto- ja toiminnallisuuskomponenttien sekä ohjelmistoluokkien määrittämiseen. Määritystyö perustuu työssä yksityiskohtaisesti laadittujen menetelmien ja komponenttiryhmitysten hyödyntämiselle. Kunkin alueen analysointi mahdollistaa viitekehyksen ja laskentamatriisin rakentamisen yhdenmukaisten määritysten perusteella. Viitekehykselle on ominaista sen muunneltavuus. Nykymuodossaan se soveltuu elektroniikka- ja high-tech yrityksille. Viitekehystä voidaan hyödyntää myös muilla toimialoilla muokkaamalla lisäarvontuottokomponentteja kunkin toimialan intressien mukaisesti. Vastaavasti analysoitava ohjelmisto voidaan valita tapauskohtaisesti. Laskentamatriisi on kuitenkin ensin päivitettävä valitun ohjelmiston kyvykkyyksillä, minkä jälkeen viitekehys voi tuottaa soveltuvuustuloksia kyseiseen yritystapaukseen perustuen

Software methods for HTML files protection in local / corporate networks: review and implementation

Tässä luomistyössä on esitetty tutkimus informaation suojaamisen menetelmien osalta paikallisissa ja ryhmäkuntaisissa verkoissa. Tutkimukseen kuuluu nykyaikaisten kryptagraafisten järjestelmien, Internetin/Intranetin ohjelmointikeinojen ja pääsyoikeuksien jakelumenetelmien analyysi. Tutkimusten perusteella on laadittu ohjelmiston prototyyppi HTML-tiedostojen suojaamista varten. Ohjelmiston laatimisprosessi on sisältänyt vaatimusten, järjestelmän ja suojelukomponenttien suunnittelun ja protytyypin testauksen. Ohjelmiston realisoinnin jälkeen kirjoitettiin käyttöohjeet. Ohjelmiston prototyyppi suojaa informaatiota HTML-tiedoston koko käytön aikana ja eri yrityksissä voidaan käyttää sitä pienien laajennuksien jälkeen.

Cannabis Users Identifying Themselves as Non-Cigarette Smokers : Who Are They?

Introduction and Aims. About 20% of cannabis consumers report not smoking cigarettes. Studies that have compared cannabis and cigarette smokers, cigarette smokers, and cannabis users who do not smoke cigarettes (CNSs) have shown that CNSs have better outcomes across a range of indicators compared to the others. Therefore, we conducted a qualitative study to determine why CNSs did not smoke cigarettes and how they managed to resist cigarette smoking in order to better inform prevention efforts. Design and Methods. We conducted five focus groups (FG) with a total of 19 CNSs between ages 16 and 25. A narrative analysis of FGs was conducted using qualitative analysis software. Results. CNSs' non-smoking choice was rooted in a negative opinion of cigarettes and a harm-reduction strategy. They were unique cases within their peer groups, but there were no CNSs groups. All participants were confronted to the mulling paradox. Discussion and Conclusions. While tobacco-use prevention seems to have been successful, CNSs need to be informed of harmful consequences of chronic cannabis use. Given their habit of adding tobacco to cannabis, CNSs need to be alerted that they may be nicotine dependent even though they do not smoke tobacco on its own. This exploratory study brings essential insight concerning this specific population of cannabis consumers which future research should continue to develop.

Comparison of different methods to forecast hospital bed needs

Objectives : This study compares three methods to forecast the number of acute somatic hospital beds needed in a Swiss academic hospital over the period 2010-2030. Design : Information about inpatient stays is provided through a yearly mandatory reporting of Swiss hospitals, containing anonymized data. Forecast of the numbers of beds needed compares a basic scenario relying on population projections with two other methods in use in our country that integrate additional hypotheses on future trends in admission rates and length of stay (LOS).

The Optimisation of the Draft Tube of a Hydro Power Plant at Off-Design Conditions

Several possible methods of increasing the efficiency and power of hydro power plants by improving the flow passages are investigated in this stydy. The theoretical background of diffuser design and its application to the optimisation of hydraulic turbine draft tubes is presented in the first part of this study. Several draft tube modernisation projects that have been carried out recently are discussed. Also, a method of increasing the efficiency of the draft tube by injecting a high velocity jet into the boundary layer is presented. Methods of increasing the head of a hydro power plant by using an ejector or a jet pump are discussed in the second part of this work. The theoretical principles of various ejector and jet pump types are presented and four different methods of calculating them are examined in more detail. A self-made computer code is used to calculate the gain in the head for two example power plants. Suitable ejector installations for the example plants are also discussed. The efficiency of the ejector power was found to be in the range 6 - 15 % for conventional head increasers, and 30 % for the jet pump at its optimum operating point. In practice, it is impossible to install an optimised jet pump with a 30 % efficiency into the draft tube as this would considerabely reduce the efficiency of the draft tube at normal operating conditions. This demonstrates, however, the potential for improvement which lies in conventional head increaser technology. This study is based on previous publications and on published test results. No actual laboratory measurements were made for this study. Certain aspects of modelling the flow in the draft tube using computational fluid dynamics are discussed in the final part of this work. The draft tube inlet velocity field is a vital boundary condition for such a calculation. Several previously measured velocity fields that have successfully been utilised in such flow calculations are presented herein.

High-Speed Solid-Rotor Induction Machine – Electromagnetic Calculation and Design

Within the latest decade high-speed motor technology has been increasingly commonly applied within the range of medium and large power. More particularly, applications like such involved with gas movement and compression seem to be the most important area in which high-speed machines are used. In manufacturing the induction motor rotor core of one single piece of steel it is possible to achieve an extremely rigid rotor construction for the high-speed motor. In a mechanical sense, the solid rotor may be the best possible rotor construction. Unfortunately, the electromagnetic properties of a solid rotor are poorer than the properties of the traditional laminated rotor of an induction motor. This thesis analyses methods for improving the electromagnetic properties of a solid-rotor induction machine. The slip of the solid rotor is reduced notably if the solid rotor is axially slitted. The slitting patterns of the solid rotor are examined. It is shown how the slitting parameters affect the produced torque. Methods for decreasing the harmonic eddy currents on the surface of the rotor are also examined. The motivation for this is to improve the efficiency of the motor to reach the efficiency standard of a laminated rotor induction motor. To carry out these research tasks the finite element analysis is used. An analytical calculation of solid rotors based on the multi-layer transfer-matrix method is developed especially for the calculation of axially slitted solid rotors equipped with wellconducting end rings. The calculation results are verified by using the finite element analysis and laboratory measurements. The prototype motors of 250 – 300 kW and 140 Hz were tested to verify the results. Utilization factor data are given for several other prototypes the largest of which delivers 1000 kW at 12000 min-1.

Translation and psychometric evaluation of a French version of the Readiness for Hospital Discharge Scale.

AIMS AND OBJECTIVES: To evaluate the reliability and the factor structure of the Readiness for Hospital Discharge Scale - French version. BACKGROUND: The patient's perspective is essential when assessing risk for adverse events at hospital discharge. Developed in the USA, the Readiness for Hospital Discharge Scale is the only instrument that measures an individual's self-perception of readiness before leaving the hospital. A French version of the Readiness for Hospital Discharge Scale was developed and validated. DESIGN: Cross-sectional study. METHODS: A convenience sample of 265 older inpatients from four medical units was selected. The translation and cultural adaptation of the scale involved experts in gerontology and the French language and included back translation. The items were semantically evaluated and pretested in 10 older inpatients. The scale's psychometric properties were internally validated by using confirmatory and exploratory factor analyses. Reliability was assessed by examining the internal consistency of its items. RESULTS: Goodness-of-fit indices of the confirmatory factor analyses were not adequate, but reliability was acceptable (Cronbach's α = 0·80). Exploratory factor analysis of the French version provided results close to those described for the English version, with three similar subscales (physical and emotional readiness, coping with medical treatment and personal care), whereas the initially described Expected Support subscale was not identified in the French version. CONCLUSION: The Readiness for Hospital Discharge Scale - French version appears to be partially consistent with its original English version, but requires additional adaptation to fully take into account the Swiss context and culture to achieve its original aim. RELEVANCE TO CLINICAL PRACTICE: Assessing patient readiness for hospital discharge before leaving hospital could help nurses to improve the discharge planning process and achieve better patient preparedness and care coordination.

Effect of humeral stem design on humeral position and range of motion in reverse shoulder arthroplasty.

PURPOSE: The impacts of humeral offset and stem design after reverse shoulder arthroplasty (RSA) have not been well-studied, particularly with regard to newer stems which have a lower humeral inclination. The purpose of this study was to analyze the effect of different humeral stem designs on range of motion and humeral position following RSA. METHODS: Using a three-dimensional computer model of RSA, a traditional inlay Grammont stem was compared to a short curved onlay stem with different inclinations (155°, 145°, 135°) and offset (lateralised vs medialised). Humeral offset, the acromiohumeral distance (AHD), and range of motion were evaluated for each configuration. RESULTS: Altering stem design led to a nearly 7-mm change in humeral offset and 4 mm in the AHD. Different inclinations of the onlay stems had little influence on humeral offset and larger influence on decreasing the AHD. There was a 10° decrease in abduction and a 5° increase in adduction between an inlay Grammont design and an onlay design with the same inclination. Compared to the 155° model, the 135° model improved adduction by 28°, extension by 24° and external rotation of the elbow at the side by 15°, but led to a decrease in abduction of 9°. When the tray was placed medially, on the 145° model, a 9° loss of abduction was observed. CONCLUSIONS: With varus inclination prostheses (135° and 145°), elevation remains unchanged, abduction slightly decreases, but a dramatic improvement in adduction, extension and external rotation with the elbow at the side are observed.