Engineering closure of an open pit gold operation in a semi-arid climate

Along with material characteristics and geometry, the climate in which a mine is located can have a dramatic effect on the appropriate options for rehabilitation. The paper outlines the setting, mining, milling and waste disposal at Kidston Gold Mine's open pit operations in the semi-arid climate of North Queensland, Australia, before focusing on the engineering aspects of the rehabilitation of Kidston. The mine took a holistic and proactive approach to rehabilitation, and was prepared to demonstrate a number of innovative approaches, which are described in the paper. Engineering issues that had to be addressed included the geotechnical stability and deformation of waste rock dumps, including a 240 m high in-pit dump: the construction and performance monitoring of a “store and release” cover over potentially acid forming mineralised waste rock; erosion from the side slopes of the waste rock dumps; the in-pit co-disposal of waste rock and thickened tailings; the geotechnical stability of the tailings dam wall; the potential for erosion of bare tailings; the water balance of the tailings dam; direct revegetation of the tailings; and the pit hydrology. The rehabilitation of the mine represents an important benchmark in mine site rehabilitation best practice, from which lessons applicable worldwide can be shared.

Preparing students for the virtual organisation: an evaluation of learning with virtual learning technologies

The paper explores the development of learning behaviours in a virtual management course and the factors that impacted on this development. Data suggest that most teams experienced three kinds of learning behaviours – social, operational and content learning. We propose that the need for technical expertise and team participation will vary during these different stages of learning. Addressing the characteristics of these stages, we comment on the development of a ‘completion phase’ of team development. We argue that the extent to which teams demonstrate different learning stages has a significant impact on the development of on-line learning behaviours. Discussing these results, we suggest why different teams develop distinct learning behaviours, with accordant emphasis on teaching as a moderating and co ordinating role, despite current virtual team pedagogical expectations.

Tissue engineering for bone regeneration using differentiated alveolar bone cells in collagen scaffolds

Regeneration of osseous defects by a tissue-engineering approach provides a novel means of treatment utilizing cell biology, materials science, and molecular biology. In this study the concept of tissue engineering was tested with collagen type I matrices seeded with cells with osteogenic potential and implanted into sites where osseous damage had occurred. Explant cultures of cells from human alveolar bone and gingiva were established. When seeded into a three-dimensional type I collagen-based scaffold, the bone-derived cells maintained their osteoblastic phenotype as monitored by mRNA and protein levels of the bone-related proteins including bone sialoprotein, osteocalcin, osteopontin, bone morphogenetic proteins 2 and 4, and alkaline phosphatase. These in vitro-developed matrices were implanted into critical-size bone defects in skulls of immunodeficient (SCID) mice. Wound healing was monitored for up to 4 weeks. When measured by microdensitometry the bone density within defects filled with osteoblast-derived matrix was significantly higher compared with defects filled with either collagen scaffold alone or collagen scaffold impregnated with gingival fibroblasts. New bone formation was found at all the sites treated with the osteoblast-derived matrix at 28 days, whereas no obvious new bone formation was identified at the same time point in the control groups. In situ hybridization for the human-specific Alu gene sequence indicated that the newly formed bone tissue resulted from both transplanted human osteoblasts and endogenous mesenchymal stem cells. The results indicate that cells derived from human alveolar bone can be incorporated into bioengineered scaffolds and synthesize a matrix, which on implantation can induce new bone formation.

Making developmental biology relevant to undergraduates in an era of economic rationalism in Australia

This report describes the road map we followed at our university to accommodate three main factors: financial pressure within the university system; desire to enhance the learning experience of undergraduates; and motivation to increase the prominence of the discipline of developmental biology in our university. We engineered a novel, multi-year undergraduate developmental biology program which was student-oriented, ensuring that students were continually exposed to the underlying principles and philosophy of this discipline throughout their undergraduate career. Among its key features are introductory lectures in core courses in the first year, which emphasize the relevance of developmental biology to tissue engineering, reproductive medicine, therapeutic approaches in medicine, agriculture and aquaculture. State-of-the-art animated computer graphics and images of high visual impact are also used. In addition, students are streamed into the developmental biology track in the second year, using courses like human embryology and courses shared with cell biology, which include practicals based on modern experimental approaches. Finally, fully dedicated third-year courses in developmental biology are undertaken in conjunction with stand-alone practical courses where students experience first-hand work in a research laboratory. Our philosophy is a cradle-to-grave approach to the education of undergraduates so as to prepare highly motivated, enthusiastic and well-educated developmental biologists for entry into graduate programs and ultimately post-doctoral research.

A investigação da construção de modelos no estudo de um tópico de física utilizando um ambiente de modelagem computacional qualitativo

A integração de tecnologias de informação e comunicação no contexto educacional tem sido tema de diversos congressos e simpósios ao redor do mundo e no Brasil. Neste sentido, vários estudos têm sido realizados com o objetivo de se obter metodologias que tornem efetivo o emprego das novas tecnologias no ensino. Este artigo mostra um estudo que investigou a interação entre estudantes universitários da área de ciências exatas e um ambiente de modelagem computacional qualitativo em atividades de modelagem expressiva. Os resultados obtidos mostram que os estudantes foram capazes de criar e modificar o modelo do sistema proposto a partir de suas próprias concepções.

Desempenho acadêmico e sistema de cotas : um estudo sobre o rendimento dos alunos cotistas e não cotistas da Universidade Federal do Espirito Santo

A adoção da ação afirmativa denominada cotas nas universidades federais - reserva de vagas para estudantes que tenham cursado integralmente o ensino médio em escolas públicas - continua sendo polêmica, mesmo após a sanção da Lei nº.12.711 de 2012, o que torna oportuna a contribuição aos estudos a respeito da utilização desse sistema nas universidades públicas brasileiras. Este trabalho teve por objetivo estudar o desempenho acadêmico de alunos cotistas do Centro de Ciências Jurídicas e Econômicas e do Centro Tecnológico da Universidade Federal do Espírito Santo – UFES, no período de 2008 a 2013, considerando as duas entradas anuais nos referidos cursos. O presente estudo analisou o aproveitamento acadêmico dos alunos de 15 cursos de graduação ofertados pelos Centros nominados buscando saber em quais cursos e disciplinas existem diferenças significativas de desempenho, a partir do coeficiente de rendimento acadêmico (CRA) e da média final das disciplinas cursadas por alunos cotistas e não cotistas, visando a propor ações institucionais para a redução dessas diferenças. Na pesquisa, de caráter quantitativo, utilizou-se o método estatístico de análise de variância ANOVA. A partir das análises realizadas foi possível inferir a existência de diferenças de rendimento nos cursos de engenharia,principalmente em disciplinas de cálculo e álgebra. O curso de Direito, por sua vez, apresentou diferença significativa de desempenho, não obstante as médias não estarem abaixo do índice necessário para a aprovação. Quando a comparação é feita considerando o sexo, verificou-se no curso de Ciências Econômicas e Ciências da Computação uma disparidade significativa de rendimento em favor dos alunos do sexo feminino cotistas em detrimento dos não cotistas do mesmo sexo.

Electrospun silk-elastin-like fiber mats for tissue engineering applications

Protein-based polymers are present in a wide variety of organisms fulfilling structural and mechanical roles. Advances in protein engineering and recombinant DNA technology allow the design and production of recombinant protein-based polymers (rPBPs) with an absolute control of its composition. Although the application of recombinant proteins as biomaterials is still an emerging technology, the possibilities are limitless and far superior to natural or synthetic materials, as the complexity of the structural design can be fully customized. In this work, we report the electrospinning of two new genetically engineered silk-elastin-like proteins (SELPs) consisting of alternate silk- and elastin-like blocks. Electrospinning was performed with formic acid and aqueous solutions at different concentrations without addition of further agents. The size and morphology of the electrospun structures was characterized by scanning electron microscopy showing to be dependent of concentration and solvent used. Treatment with air saturated with methanol was employed to stabilize the structure and promote water insolubility through a time-dependent conversion of random coils into β-sheets (FTIR). The resultant methanol-treated electrospun mats were characterized for swelling degree (570-720%), water vapour transmission rate (1083 g/m2/day) and mechanical properties (modulus of elasticity of ~126 MPa). Furthermore, the methanol-treated SELP fiber mats showed no cytotoxicity and were able to support adhesion and proliferation of normal human skin fibroblasts. Adhesion was characterized by a filopodia-mediated mechanism. These results demonstrate that SELP fiber mats can provide promising solutions for the development of novel biomaterials suitable for tissue engineering applications.

Effect of poling state and morphology of piezoelectric poly(vinylidene fluoride) membranes for skeletal muscle tissue engineering

This work reports on the influence of polarization and morphology of electroactive poly(vinylidene fluoride), PVDF, on the biological response of myoblast cells. Non-poled, ‘‘poled +’’ and “poled-“ -PVDF were prepared in the form of films. Further, random and aligned electrospun -PVDF fiber mats were also prepared. It is demonstrated that negatively charged surfaces improve cell adhesion and proliferation and that the directional growth of the myoblast cells can be achieved by the cell culture on oriented fibers. Therefore, the potential application of electroative materials for muscle regeneration is demonstrated.

GUIsurfer: A Reverse Engineering Framework for User Interface Software

GUIsurfer: A Reverse Engineering Framework for User Interface Software